Toshiba P300 инструкция обслуживания

Satellite DynaBook V1, V2 Series Maintenance Manual (960-272) 1 Toshiba Personal Computer Satellite P300 Maintenance Manual TOSHIBA CORPORATION File Number 960-Q08[...]

Satellite P300 Maintenance Manual (960-Q08) 2 Copyright © 2003 by Toshiba Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed with respect to the use of the inform ation contained herein. Toshiba Personal Computer Wa[...]

Satellite P300 Maintenance Manual (960-Q08) 3 Preface This maintenance manual describes how to perform hardware service maintenance for the Toshiba Personal Computer Satellite A300 Series. The procedures described in this manual are intended to help service technicians isolate faulty Field Replaceable Units (FRUs) and replace them in the field. SAF[...]

Satellite P300 Maintenance Manual (960-Q08) 4 The manual is divided into the following parts: Chapter 1 Hardware Overview describes the Satellite A300 system unit and each FRU. Chapter 2 Troubleshooting Procedures explains how to diagnose and resolve FRU problems. Chapter 3 Test and Diagnostics describes how to perform test and diagnostic operation[...]

Satellite P300 Maintenance Manual (960-Q08) 5 Conventions This manual uses the following formats to describe, identify, and highlight term s and operating procedures. Acronyms On the first appearance and whenever necessary for clarification acronyms are enclosed in parentheses following their definition. For example: Read Only Memory (ROM) Keys Key[...]

Satellite P300 Maintenance Manual (960-Q08) 6 Table of Contents Chapter 1 Hardware Overview 1.1 Features ................................................................................................................... .......1 1.2 System Block Diagram ...............................................................................................[...]

Satellite P300 Maintenance Manual (960-Q08) 7 Procedure 1 Message Check ....................................................................... 1 5 Procedure 2 Debugging Port Check ............................................................ 1 7 Procedure 3 Diagnostic Test Program Execution Check ............................ 22 Procedure 4 Replacem[...]

Satellite P300 Maintenance Manual (960-Q08) 8 2.9 Display Troubleshooting..............................................................................................38 Procedure 1 External Monitor Check...........................................................38 Procedure 2 Diagnostic Test Program Execution Check .............................38 [...]

Satellite P300 Maintenance Manual (960-Q08) 9 3.5 Memory Test ............................................................................................................ 3-13 3.6 Keyboard Test .......................................................................................................... 3-16 3.7 Display Test ...........................[...]

Satellite P300 Maintenance Manual (960-Q08) 10 3.21. 5 How to enter data ……………………………………………………3-64 Chapter 4 Replacement Procedures 4.1 Overview ................................................................................................................... .4 - 1 Safety Precautions ........................[...]

Satellite P300 Maintenance Manual (960-Q08) 11 Appendices Appendix A Handling the LCD Module ........................................................................... A-1 Appendix B Board Layout ................................................................................................ B-1 Appendix C Pin Assignments..........................[...]

Satellite P300 Maintenance Manual (960-Q08) 12[...]

Satellite P300 and Satellite Pro P300 Maintenance Manual(96 0-Q08 ) I -1 Chapter 1 Hardware Overview[...]

Chapter 1 Hardware Overview Satellite P300 and Satellite Pro P300 Maintenance Manual(9 6 0-Q08) I -2 Chapter 1 Contents (Intel Platform) 1.1 Features ................................................................................................................... .......1 1.2 System Block Diagram ..................................................[...]

Hardware Overview Chapter 1 Satellite U300 and Satellite Pro U300 Maintenance Manual(960-Q0 8) 1-1 Tables Table 1-1 2.5-inch HDD dimensions .................................................................................9 Table 1-2 2.5-inch HDD dimensions ...............................................................................10 Table 1-3 2[...]

Chapter 1 Hardware Overview Satellite P300 Maintenance Manual (960- Q08) 1 Features 1.1 Features The Satellite P300 Satellite Pro P300 (In tel Platform) series are 2 spindle PCs running Intel® Core Duo Processor T8100 (800MHz) or higher Intel® Core Duo Processor T9300 (800MHz) or higher. Intel® Pentium Dual Processor T2330 or higher. Intel® Cel[...]

Chapter 1 Hardware Overview SatelliteP300 Maintenance Manual (960 -Q08) 2 Maximum upgradeable system memory may depend on the model θ VRAM Shared with System RAM for Intel GM965, PM965,GL960, GM965 +ATI M82XT Graphic card:64MB,128MB,256MB. θ HDD(First/Second Hard Drive – SATA) 160GB, 200GB, 250GB, 300GB, internal drives. 2.5 inch x 9.5mm height[...]

Chapter 1 Hardware Overview Satellite P300 Maintenance Manual (960- Q08) 3 It is good with no external power source for 1month on average. The main battery is a detachable lithium ion battery. 6 cell Li-Ion 10.8v/4000mAh 9 cell Li-Ion 10.8v/6000mAh θ USB (Universal Serial Bus) 3 USB ports are provided. The ports co mply with the USB2.0 standard, w[...]

Chapter 1 Hardware Overview θ 3D Accelerometer for HDD Figure 1-1 Front of the computer 4 SatelliteP300 Maintenance Manual (960 -Q08)[...]

Chapter 1 Hardware Overview 1.2 System Block Diagram Figure 1-2 shows the system block diagram. Figure 1-2 System block di agram for Intel Platform 5 Satellite P300 Maintenance Manual (960- Q08)[...]

Chapter 1 Hardware Overview SatelliteP300 Maintenance Manual (960 -Q08) 6 The PC contains the following components. θ CPU Intel Core 2 Duo Processor FSB : 667 MHz T5550(1.83GHz) T5750(2.0GHz) T5850(2.16GHz FSB : 800MHz T8100(2.10GHz) T8300(2.40GHz) T9300(2.5GHz) T9500(2.6GHz) Intel Pentium Dual FSB :533GHz T2330(1.6GHz) T2370(1.73GHz) T2390(1.86GH[...]

Chapter 1 Hardware Overview Satellite P300 Maintenance Manual (960- Q08) 7 • North Bridge (Intel PM965,GM965/GL960) − Celeron processor System Bus support − DRAM Controller : DDRII 533/667/800 support − DMI − 1299-ball 35 x 35mm Mirco FC-BGA Package • South Bridge (Intel 82801HBM ICH8-M) − Direct Media Interface (DMI) − PCI Express [...]

Chapter 1 Hardware Overview SatelliteP300 Maintenance Manual (960 -Q08) 8 θ MODEM (Conexant x 1) Supported by on board Modem + DAA daughter card. Data and FAX transmission is available. Supports ITU-TV.90. The transfer speed of data receiving is 56kbps, of data sending is 33.6kbps and of FAX is 14.4kbps. Actual speed depends on the quality of the [...]

Chapter 1 Hardware Overview 1.3 2.5-inch Hard Disk Drive A compact, high-capacity HDD with a height of 9.5mm. Contains a 2.5-inch magnetic disk and magnetic heads. Figure 1-3 shows a view of the 2.5-inch HDD and Tables 1-1 and 1-2 list the specifications. Figure 1-3 2.5-inch HDD Table 1-1 2.5-inch HDD dimensions Standard value Parameter TOSHIBA MK1[...]

Chapter 1 Hardware Overview SatelliteP300 Maintenance Manual (960 -Q08) 10 Standard value Parameter HITACHI HTS542512k9S A0 0 HITACHI HTS542516k9S A 00 HITACHI HTS542520k9S A 00 HITACHI HTS542525k9S A00 Width (mm) 69.85 +/- 0.25 Height (mm) 9.5 Depth (mm) 100.2 +/- 0.25 Outlin e dimen sions Weight (g) 95 (max.) 95 (max.) 102 (max.) 102 (max.) Table[...]

Chapter 1 Hardware Overview Satellite P300 Maintenance Manual (960- Q08) 11 Table 1-3 2.5-inch HDD specifications Specification Parameter TOSHIBA MK1246G SX TOSHIBA MK1646GS X TOSHIBA MK2046G SX TOSHIBA MK2546G SX TOSHIBA MK3252G SX Storage size (formatted) 120GB 160GB 200GB 250 GB 320GB Speed (RPM) 5,400 Data transfer Rate - To/From Media - T0/Fro[...]

Chapter 1 Hardware Overview Specification Parameter HITACHI HTS542512k9 SA 00 HITACHI HTS542516k9S A00 HITACHI HTS542520k9S A 00 HITACHI HTS542525k9S A0 0 Storage size (formatted) 120GB 160GB 200GB 250GB Speed (RPM) 5,400 Data transfer Rate - To/From Media - T0/From Hos t 65.5MB/s 1.5Gbps 65.5MB/s 1.5Gbps 65.5MB/s 1.5Gbps 65.5MB/s 1.5Gbps bus trans[...]

Chapter 1 Hardware Overview 1.4 Optical drive (DVD Super Multi Drive) The DVD Super Multi drive accommodates eith er 12 cm (4.72-inch) or 8 cm (3.15-inch) CD/DVD-ROM, CD-R/RW, DVD±R/±RW and DVD-RA M. It is a high-performance drive that reads DVD-ROM at maximum 8-speed a nd CD at maximum 24-sp eed. Write speed of DVD±R/±RW and DVD-RAM is differe[...]

Chapter 1 Hardware Overview SatelliteP300 Maintenance Manual (960 -Q08) 14 Table 1-5 DVD Super Multi drive specifications (1/4) Drive Specification TST TST PNR PNR Parameter TS-L632H TS-L632P DVR-KD08TBT DVR-KD08TBL Read (KB/s) CD-ROM 3600 KB/s CD-R 3600 KB/s CD-RW 3600 KB/s DVD-ROM(L) 10800 KB/s DVD+/-R Dual8100KB/s DVD-RAM 6750 KB/s CD-ROM 3600 K[...]

Chapter 1 Hardware Overview Satellite P300 Maintenance Manual (960- Q08) 15 Buffer memory 2 M 2 M 2 Mbytes 2 Mbytes CD 650MB CD- ROMR(Rad Only) 80mm CD(Horizontal Mount only) 800/700/650 CD- Recordable (Read & Write) 700/650 MB CD-Rewritable (Read & Write) 700/650MB High Speed CD-Rewritable (Read & Write) 700/650 MB Ultra Speed CD-Rewri[...]

Chapter 1 Hardware Overview 1.5 Keyboard The Satellite P300 keyboard has two different kind s of placement, one is for JP style and the other is for US/UK style Figure 1-5 is a view of the keyboard for US style Figure 1-5 Keyboard for US style Figure 1-6 is a view of the keyboard for UK style. Figure 1-6 Keyboard for UK style 16 SatelliteP300 Maint[...]

Chapter 1 Hardware Overview Figure 1-7 is a view of th e keyboard for JP style. Figure 1-7 Keyboard for JP style See Appendix E for details of the keyboard layout. 17 Satellite P300 Maintenance Manual (960- Q08)[...]

Chapter 1 Hardware Overview 1.6 TFT Color Display The SatelliteP300 and Satellite Pro 300 Panel use CCFL to control backlight. 1.6.1 LCD Module with CCFL Backlight Figure 1-8 ~ 1-11 shows a view of the LCD mo dule and Table 1-8 li sts the specifications. Figure 1-8 LG-Philips LCD Module 18 SatelliteP300 Maintenance Manual (960 -Q08)[...]

Chapter 1 Hardware Overview Figure 1-9 AUO LCD Module 19 Satellite P300 Maintenance Manual (960- Q08)[...]

Chapter 1 Hardware Overview Figure 1-10 CMO LCD Module 20 SatelliteP300 Maintenance Manual (960 -Q08)[...]

Chapter 1 Hardware Overview Figure 1-11 SAMSUNG LCD Module Table 1-6 LCD module specifications Specifications(WXGA+) Item LG-Philips LP171WP4-TLN1 AUO B170PW06 CMO N170C2-L02 Samsung LTN170X2-L02-S Number of Dots 1,440 x 3(R,G,B) x 900 Dot spacing (mm) 0.255(H) × 0.2555(V) Display Colors 262,144 colors 21 Satellite P300 Maintenance Manual (960- Q0[...]

Chapter 1 Hardware Overview SatelliteP300 Maintenance Manual (960 -Q08) 22 1.6.2 CCFL Inverter Board Table 1-7 lists the FL inve rter board specifications. Table 1-7 FL inverter board specifications Specifications Item Foxconn T18I095.00 Delta DAC-08N035 AF SUMIDA TWS-449-308 TDK TBD485NR Voltage (V) 8~20 8~20 8~20 8~20 Input Power (W) 7.5W 7.5W 7.[...]

Chapter 1 Hardware Overview Satellite P300 Maintenance Manual (960- Q08) 23 1.7 Power Rails Table 1-8 lists the power rail output sp ecifications of Santa Rosa platform. Table 1-8 Power supply output rating Power supply （ Yes/No ） Name Voltage [V] Power OFF Suspend mode Power OFF Boot mode No Battery +5VPCU 5 Yes Yes No +5V_S5 5 Yes No No +5V 5[...]

Chapter 1 Hardware Overview SatelliteP300 Maintenance Manual (960 -Q08) 24 1.8 Batteries The PC has the following two batteries. θ Main battery θ Real time clock (RTC) battery Table 1-9 lists the specifications for these two batteries. Table 1-9 Battery specifications Battery Name Batte ry Element Output Volta g e Capacity Sanyo 6 cell 10.8v 4000[...]

Chapter 1 Hardware Overview Satellite P300 Maintenance Manual (960- Q08) 25 1.8.2 Battery Charging Control Battery charging is controlled by a power supply microprocessor. The power supply microprocessor controls power supply and dete cts a full charge when the AC adaptor and battery are connected to the computer. θ Battery Charge When the AC adap[...]

Chapter 1 Hardware Overview SatelliteP300 Maintenance Manual (960 -Q08) 26 1.8.3 RTC Battery The RTC battery provides the power supply to maintain the date, time, and other system information in memory. Table 1-12 lists the Time required for charges of RTC battery and data preservation time. Table 1-12 Time required fo r charges of RTC battery Cond[...]

Chapter 1 Hardware Overview Satellite P300 Maintenance Manual (960- Q08) 27 1.9 AC Adapter The AC adapter is used to charge the battery. Table 1-13 lists the AC adapter specifications. Table 1-13 AC adapter specifications Parameter Specification With Led DELTA/ LITE-ON DELTA/ LITE-ON DELTA/ LITE-ON Power 75W 90W 120W Input voltage AC 100V/240V Inpu[...]

[CONFIDENTIAL ] 2-1 Chapter 2 Troubleshooting Procedures Chapter 2 Contents 2.1 Troubleshooting ........................................................................................................... .1 2.2 Troubleshooting Flowchart ........................................................................................... 3 2.3 Power Supply Tr[...]

[CONFIDENTIAL]Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q08) 2-2 2.6 2.5” HDD Troubleshooting ......................................................................................... 28 Procedure 1 Partition Check........................................................................ 29 Procedure 2 Message Check .............[...]

Satellite P300 and Satellite Pro P300 Maintenance Manual(9 6 0-Q08) 2- 3 Procedure 2 Replacement Check ................................................................. 50 2.1 5 Fingerprint Troubleshooting .................................................................................... 51 Procedure 1 Diagnostic Test Program Execution Check ....[...]

2 Troubleshooting Procedures Satellite P300 and Satellite Pro P30 0 Maintenance Manual (960-Q08 )  1 2 2.1 Troubleshooting Chapter 2 describes how to determine which Field Replaceable Unit (FRU) in the computer is causing the computer to malfunction. The FRUs covered are: 1. Power supply 6. Touch pad 11. Wireless LAN 2. System Boa[...]

2 Troubleshooting Procedures There are following two types of connections in the figure of board and module connection in and after 2.3 Power Supply Troubleshooting. (1) Cable connection is descri bed in the figure as line. (2) Pin connection is describe d in the figure as arrow. <e.g.> Connection of modem Satellite P300 and Satellite Pro P30[...]

2 Troubleshooting Procedures Satellite P300 and Satellite Pro P30 0 Maintenance Manual (960-Q08 )  3 2.2 Troubleshooting Flowchart Use the flowchart in Figure 2-1 as a guide fo r determining which troubleshooting procedures to execute. Before going through the flow chart steps, verify the following:  Ask him or her to enter the[...]

2 Troubleshooting Procedures Figure 2-1 Troubleshooting flowchart (1/2) Satellite P300 and Satellite Pro P30 0 Maintenance Manual (960-Q08 )  4[...]

2 Troubleshooting Procedures Figure 2-1 Troubleshooting flowchart (2/2) Satellite P300 and Satellite Pro P30 0 Maintenance Manual (960-Q08 )  5[...]

2 Troubleshooting Procedures Satellite P300 and Satellite Pro P30 0 Maintenance Manual (960-Q08 )  6 If the diagnostics program cannot detect an e rror, the problem may be intermittent. The Test program should be executed several tim es to is olate the problem. Check the Log Utilities function to confirm which diagnostic test de t[...]

2 Troubleshooting Procedures Satellite P300 and Satellite Pro P30 0 Maintenance Manual (960-Q08 )  7 Procedures in Section 2.17.[...]

2 Troubleshooting Procedures Satellite P300 and Satellite Pro P30 0 Maintenance Manual (960-Q08 )  8 2.3 Power Supply Troubleshooting The power supply controller cont rols many functions and compone nts. To determine if the power supply is functioning properly, start with Procedure 1 and continue with the other Procedures as instr[...]

2 Troubleshooting Procedures Satellite P300 and Satellite Pro P30 0 Maintenance Manual (960-Q08 )  9 Table 2-2 DC IN icon(Low cost) DC IN icon Power supply status Lights white(Green) DC power is being sup plied from the AC adapter. Blinks white(Green) Power supply malfunctio n *1 Doesn’t light Any condition other than those abov[...]

2 Troubleshooting Procedures Satellite P300 and Satellite Pro P30 0 Maintenance Manual (960-Q08 )  10 Procedure 2. Error Code Check The following table lists the er ror codes and error status na mes for the Diagnostic Tests. Table 2-3 Error codes and error status names (1/2) Device Name Error Code Error Status Name (Common) FF Dat[...]

2 Troubleshooting Procedures Table2 -3 Error codes and error status names (2/2) Device Name Error Code Error Status Name HDD BB Undefined Error CC Write Fault E0 Status Error F0 No Sense Error ?? Other Error Cache Memory 02 Protect Mode Error 03 Caching Erro r ?? Other Error Multimedia 01 Write Error 0F Invalid Drive 15 Drive Not Re ady ?? Other Er[...]

2 Troubleshooting Procedures Procedure 3 Connection Check The wiring diagram related to th e power supply is shown below: Any of the connectors may be disconnected. Perform Check 1. Check 1 Make sure the AC adapter and the AC power cord is firmly plugged into the DC IN connector PCN4 (REV.G and Griffin) and wall outlet. If these cables are connecte[...]

2 Troubleshooting Procedures Satellite P300 and Satellite Pro P30 0 Maintenance Manual (960-Q08 )  13 following procedures: Check 1 Make sure the AC adapter is fi rmly plugged into the DC IN socket. Check 2 Make sure the battery pack is properly installed. If it is properly installe d, go to Check 3. Check 3 The battery pack may b[...]

2 Troubleshooting Procedures Satellite P300 and Satellite Pro P30 0 Maintenance Manual (960-Q08 )  14 Procedure 5 Replacement Check The power is supplied to the system board by the AC adapter. If either the AC adapter or the system board was damaged, perform the following Checks. To disassemble the computer, follow the steps descr[...]

2 Troubleshooting Procedures Satellite P300 and Satellite Pro P30 0 Maintenance Manual (960-Q08 )  15 2.4 System Board Troubleshooting This section describes how to determ ine if th e system board is malfunctioning or not. Start with Procedure 1 and continue with the other procedures as instructed. The procedures described in this[...]

2 Troubleshooting Procedures Satellite P300 and Satellite Pro P30 0 Maintenance Manual (960-Q08 )  1 6 Procedure 1 Message Check When the power is turned on, the system perfor ms the Power On Self Test (POST) installed in the BIOS ROM. The POST tests each IC on the system board and initializes it.  If an error message is shown [...]

2 Troubleshooting Procedures Satellite P300 and Satellite Pro P30 0 Maintenance Manual (960-Q08 )  1 7 If any other error message displays, perform Check 3. Check 3 The IRT checks the system board. When the IRT detects an error, the system stops or an error message appears. If one of the following error messages (1) th rough (17),[...]

2 Troubleshooting Procedures Procedure 2 Debugging Port Check Check the MiniPCI Debug board. The tool for debug port test is shown below. Figure 2-2 A set of to ol for debug port test The test procedures are follows: 1. Replace Mini PCI debug port with Wireless LAN card, check LED in the Mini PCI debug board The following is a list of the Test Po i[...]

2 Troubleshooting Procedures Satellite P300 and Satellite Pro P30 0 Maintenance Manual (960-Q08 )  19 13h Initialize PCI Bus Mastering devices Code Beeps POST Routine Description 14h Initialize keyboard controller 16h 1-2-2-3 BIOS ROM checksum 17h Initialize cache before memory autosize 18h 8254 timer initialization 1Ah 8237 DMA c[...]

2 Troubleshooting Procedures Satellite P300 and Satellite Pro P30 0 Maintenance Manual (960-Q08 )  20 62h Test extended memory address lines 64h Jump to UserPatch1 66h Configure advanced cache registers 67h Initialize Multi Processor APIC 68h Enable external and CPU caches 69h Setup System Management Mode (SMM) area 6Ah Display ex[...]

2 Troubleshooting Procedures Satellite P300 and Satellite Pro P30 0 Maintenance Manual (960-Q08 )  21 A2h Check key lock A4h Initialize Typematic rate A8h Erase F2 prompt Code Beeps POST Routine Description AAh Scan for F2 key stroke ACh Enter SETUP AEh Clear Boot flag B0h Check for errors B2h POST done - prepare to boot operating[...]

2 Troubleshooting Procedures Satellite P300 and Satellite Pro P30 0 Maintenance Manual (960-Q08 )  22 Code Beeps For Boot Block in Flash ROM E0h Initialize the chipset E1h Initialize the bridge E2h Initialize the CPU E3h Initialize system timer E4h Initialize system I/O E5h Check force recovery boot E6h Checksum BIOS ROM E7h Go to[...]

2 Troubleshooting Procedures Satellite P300 and Satellite Pro P30 0 Maintenance Manual (960-Q08 )  23 Procedure 3 Diagnostic Test Program Execution Check Execute the following tests from the Diagnostic Test Menu. These tests check the system board. Refer to Chapter 3, Tests and Diagnostic, for more information on how to perform th[...]

2 Troubleshooting Procedures Satellite P300 and Satellite Pro P30 0 Maintenance Manual (960-Q08 )  24 2.5 USB FDD Troubleshooting To check if the USB FDD is malfunctioning or not, follow the troubl eshooting procedures below as instructed. Procedure 1: FDD Head Cleaning Check Procedure 2: Diagnostic Te st Program Execution Check P[...]

2 Troubleshooting Procedures Satellite P300 and Satellite Pro P30 0 Maintenance Manual (960-Q08 )  25 Procedure 2 Diagnostic Test Program Execution Check Insert the Diagnostics Disk in the USB FDD, tu rn on the computer and run the test. Refer to Chapter 3, Tests and Diagnostics, for more inform ation about th e diagnostics test p[...]

2 Troubleshooting Procedures Procedure 3 Connector Check an d Replacement Check USB FDD is connected to USB port on system board and US board. US board is also connected to system board by cable. The connect ion of cable and board may be defective. Otherwise, they may be faulty. Disassemble th e computer following the steps described in Chapter 4, [...]

2 Troubleshooting Procedures Satellite P300 and Satellite Pro P30 0 Maintenance Manual (960-Q08 )  2 7 Check 2 USB FDD may be fau lty. Replace it with a new one. If the problem still occurs, perform Check 3. Check 3 Connect USB FDD to each port embedded on system board. If it does not work properly when co nnected to CN6, CN7, CN3[...]

2 Troubleshooting Procedures Satellite P300 and Satellite Pro P30 0 Maintenance Manual (960-Q08 )  28 2.6 2.5” HDD Troubleshooting To check if 2.5” HDD is malfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Partition Check Procedure 2: Message Check Procedure 3: Format Check Procedure[...]

2 Troubleshooting Procedures Satellite P300 and Satellite Pro P30 0 Maintenance Manual (960-Q08 )  29 Procedure 2 Message Check When the power is turned on, the system perfor ms the Initial Reliability T est (IRT) installed in the BIOS ROM. When the test detects an error, an error message is displayed on the screen. Make sure no f[...]

2 Troubleshooting Procedures Satellite P300 and Satellite Pro P30 0 Maintenance Manual (960-Q08 )  30 Procedure 3 Format Check The computer’s HDD is formatted using the MS-DOS FORMAT program or the physical format program of the test program. To fo rmat the HDD, start with Check 1 below and perform the other steps as required. R[...]

2 Troubleshooting Procedures Satellite P300 and Satellite Pro P30 0 Maintenance Manual (960-Q08 )  31 Procedure 4 Diagnostic Test Program Execution Check The HDD test program is stored in the Diagnosti cs Disk. Perform all of the HDD tests in the Hard Disk Drive Test. Refer to Chapter 3, Tests and Diagnostics, for more information[...]

2 Troubleshooting Procedures Procedure 5 Connector Check an d Replacement Check HDD(s) is/are connected to the connector(s) on the system board. Th e connection of HDD(s) and board may be defective. Otherwise, they may be faulty. Disassemble the com puter following instructions in Chapter 4, Replacement Procedures and perform the following checks. [...]

2 Troubleshooting Procedures Satellite P300 and Satellite Pro P30 0 Maintenance Manual (960-Q08 )  33 2.7 Keyboard Troubleshooting To check if the computer’s keyboard is malfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Diagnostic Te st Program Execution Check Procedure 2: Connector a[...]

2 Troubleshooting Procedures Procedure 2 Connector and Replacement Check The connection of cable and board may be de fective. Otherwise, they may be faulty. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures , and perform the following checks: Check 1 Make sure keyboard cable is firmly connected to system bo[...]

2 Troubleshooting Procedures Satellite P300 and Satellite Pro P30 0 Maintenance Manual (960-Q08 )  35 2.8 Touch pad Troubleshooting To check if the computer’s touch pad is malfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Diagnostic Te st Program Execution Check Procedure 2: Connector[...]

2 Troubleshooting Procedures Procedure 2 Connector and Replacement Check The connection of cable and board may be de fective. Otherwise, they may be faulty. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures , and perform the following checks: Check 1 Make sure the cable is fi rmly connected to system board.[...]

Troubleshooting Procedures Satellite P300 and Satellite Pro P30 0 Maintenance Manual 3 7 2.9 Display Troubleshooting To check if the computer’s display is ma lfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: External Monitor Check Procedure 2: Diagnostic Te st Program Execution Check Procedure 3: Connect[...]

Troubleshooting Procedures Procedure 3 Connector and Cable Check LCD Module is connected to system board by an LCD/FL cable. FL inverter board is also connected to system board by an LCD/FL cable . And, fluorescent lamp is connected to FL inverter board by HV cable. Their cables may be disconnected from system board or FL inverter board. Disassembl[...]

Troubleshooting Procedures Satellite P300 and Satellite Pro P30 0 Maintenance Manual 39 Procedure 4 Replacement Check Fluorescent lamp, FL inverter, LCD module, HV cable and LCD/FL cable are connected to display circuits. Any of these components may be faulty. Refer to Chapter 4, Replacement Procedures, for instructions on how to disassembl e the c[...]

Troubleshooting Procedures 2.10 Optical Disk Drive Troubleshooting To check if optical disk drive is malfunctioni ng or not, follow the troubleshooting procedures below as instructed. Procedure 1: Diagnostic Test Program Execution Check Procedure 2: Connector Check and Replacement Check Procedure 1 Diagnostic Test Program Execution Check Execute th[...]

Troubleshooting Procedures Satellite P300 and Satellite Pro P30 0 Maintenance Manual 41 Chapter 4. If the problem s till occurs, perform Check 3. Check 3 System board may be faulty. Replace it with ne w one following the instructions in Chapter 4.[...]

Troubleshooting Procedures Satellite P300 and Satellite Pro P30 0 Maintenance Manual 42 2.11 Modem Troubleshooting To check if modem is malfunctioning or not, fo llow the troubleshooting procedures below as instructed. Procedure 1: Diagnostic Te st Program Execution Check Procedure 2: Connector Check and Replacement Check Procedure 1 Diagnostic Tes[...]

Troubleshooting Procedures Check 1 Make sure the following connections are firmly connected. If any connector is disconnected, connect it firmly and return to Procedure 1. If the problem still occurs, perform Check 2. Satellite P300 and Satellite Pro P30 0 Maintenance Manual 43[...]

Troubleshooting Procedures Satellite P300 and Satellite Pro P30 0 Maintenance Manual 44 Check 2 Modem cable m ay be faulty. Replace it with a new one. If the problem still occurs, perform Check 3. Check 3 MDC may be faulty. Replace it with a new one following the steps in Chapter 4. If the problem still occu rs, perform Check 4. Check 4 Cable betwe[...]

Troubleshooting Procedures 2.12 LAN Troubleshooting To check if the computer’s LAN is malfunc tioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Diagnostic Te st Program Execution Check Procedure 2: Connector Check and Replacement Check Procedure 1 Diagnostic Test Program Execution Check Execute LAN test in th[...]

Troubleshooting Procedures Satellite P300 and Satellite Pro P30 0 Maintenance Manual 4 6 2.13 Wireless LAN Troubleshooting To check if the computer's W ireless LAN is malfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Transmitting-Receiving Check Procedure 2: Antennas' Connection Check Procedure[...]

Troubleshooting Procedures Procedure 2 Antennas' Connection Check The wireless LAN function-wiri ng diagram is shown below: Any of the connections may be defective. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures , and perform the following checks: Check 1 Make sure the wirele ss communication switch[...]

Troubleshooting Procedures Satellite P300 and Satellite Pro P30 0 Maintenance Manual 48 Procedure 3 Replacement Check Wireless LAN card, wireless LAN antenna or system board may be faulty. Refer to Chapter 4, Replacement Procedures, for instructions on how to disa ssemble the computer and then perform the following checks: Check 1 Wireless LAN ante[...]

Troubleshooting Procedures 2.14 Sound Troubleshooting To check if the sound function is malfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Connector Check Procedure 2: Replacement Check Procedure 1 Connector Check The connection of sound system is shown in the following figure. As the connection may be de[...]

Troubleshooting Procedures Satellite P300 and Satellite Pro P30 0 Maintenance Manual 50 Procedure 2 Replacement Check  If External microphone/Headphone does not work properly, perform check 1.  If Internal microphone /Speaker does not work properly, perform check 2.  If HP out does not work properly, perform check 3.  If Volume control [...]

Troubleshooting Procedures 2.15 Fingerprint Troubleshooting To check if the computer’s Fingerprint is ma lfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Connector Check and Replacement Check Procedure 1 Diagnostic Test Program Execution Check Execute Fingerprint test in the test program . Refer to Chap[...]

Troubleshooting Procedures Satellite P300 and Satellite Pro P30 0 Maintenance Manual 52 Chapter 4.[...]

Troubleshooting Procedures 2.16 Bluetooth Troubleshooting To check if the computer’s B lue tooth is malfunctioning or not, follow the troubleshooting procedure below as instructed. Procedure 1: Connector Check and Replacement Check Procedure 1 Connector Check and Replacement Check The B lue tooth function is connected to system board. If B lue to[...]

Troubleshooting Procedures Satellite P300 and Satellite Pro P30 0 Maintenance Manual 54[...]

Test Program for Field. Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual 1 Chapter 3 Diagnostic Programs[...]

Test Program for Field. 2 Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual Chapter 3 Contents 3.1 Tests and Diagnostics Software Overview ............................................................... 3 3.2 Executing the Diagnostic Test .................................................................................. 4 3.3 Subte[...]

Test Program for Field. Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual 3 3.1 Tests and Diagnostics Software Overview This chapter explains how to use the Tests and Diagnostics Software for the Satellite P300 and Satellite Pro P300 computer systems. NOTES : Before starting the Tests and Diagnostics software: 1. Check all cables f[...]

Test Program for Field. 3.2 Executing the Diagnostic Test DOS is required to run the Diagnostics Program. To start the programs follow these steps: 1. Create a DOS bootable disk and copy all the files from the Tests and Diagnostics software to the disk. 2. Insert the boot disk into the computer’s floppy disk drive and turn on the computer. The fo[...]

Test Program for Field. The following menu displays: :Select item Enter:Decision item Esc:Escape TOSHIBA Satellite(Pro) P300 Diagnostics Version V1.10 [ DIAGNOSTICS MENU ] 01. DIAGNOSTIC TEST 02. RUNNING TEST 03. DMI INFORMATION 04. LOG UTILITIES 05. SYSTEM CONFIGURATION ::Select item ESC :Escape 06. OPTION 99. EXIT [ DIAGNOSTIC TEST MENU ] 01. SYS[...]

Test Program for Field. 4. Select the subtest you want to execute and press Enter . The following menu displays: 6 Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual 5. Select the desired test from the subtest menu and press Enter . The following Test Parameter menu displays: Use the arrow keys to highlight the desired option and pr[...]

Test Program for Field. Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual 7 NOTES : The Item2 and 3 of Test Parameter are not used by some tests. Go To Test Move the highlight bar to Go To Test and press Enter to start executing the test. Test Loop Select NO to return the screen to the subtest menu after the test is com plete. Sele[...]

Test Program for Field. 8 Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual 3.3 Subtest names Table 3-1 lists the subtest names for each test program in the Diagnostic Test menu. Table 3-1 Subtest Names(1/3) No. Test Name No. Subtest Name 01 SYSTEM TEST 01 02 03 FAN ON/OFF check Battery TEST CPU Temperature 02 MEMORY TEST 01 02 03 [...]

Test Program for Field. Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual 9 Table 3-1 Subtest Names(2/3) No. Test Name No. Subtest Name 05 FLOPPY DISK TEST 01 02 03 04 05 Sequential Read Sequential W/R/C Random Address/Data Write Specified Address Read Specified Address 06 HARD DISK TEST 01 02 03 04 05 06 07 08 Sequential Read Addr[...]

Test Program for Field. 10 Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual Table 3-1 Subtest Names(3/3) No. Test Name No. Subtest Name 10 MULTIMEDIA TEST 01 02 03 04 Sequential Read Test Random Read Test Read Specified Address Test 1 point W/R/C Test 11 MEMORY2 01 02 03 04 All one/zero Test Walking 1/Walking 0 Test(Left) Walking [...]

Test Program for Field. 3.4 Sy stem Test To execute the System Test select 01 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The System Test contains three subtests. Move the highlight bar to the subtest you want to execute and press Enter . Subtest 01 FAN ON/OFF Checking Select 1,2,3 to control FAN on/off , 1=F[...]

Test Program for Field. 12 Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual Subtest 03 CPU Temperature This will display CPU Temperature for check , press [ESC] to exit . [CPU_TEMP.EXE] Program Version : 1.0 03-27-2007 CPU Temperature : XX[...]

Test Program for Field. Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual 13 3.5 Memory Test To execute the Memory Test select 02 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The Memory Test contains five subtests that test the computer’s mem ory. Move the highlight bar to the subtest you wa[...]

Test Program for Field. 14 Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual 5. Address pattern test “16 bit write and 16 bit read” of address pattern data is executed and the new data is compared with the original data. Test data = 0000H, 0004H, 0008H, 000CH,...8000H, 8004H, through FFECH Subtest 02 Protected Mode This subtest[...]

Test Program for Field. Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual 15 with the original data patterns. Addresses are displayed in 64KB increments during the test. Test Process: 1. Byte Enable Test One bit write/ 8 bit read” is executed and the new data is compared with the original data. Test data = CCAA5533H, 80000000H 2.[...]

Test Program for Field. 16 Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual Test Process: 1. Checks the memory size to determ ine the maxim um size of installed memor y. 2. Tests memory addresses 0 to the m aximum installed. 3. Writes, reads, and compares test data after a m emory refresh cycle (16ms or more). NOTE: There may be a[...]

Test Program for Field. 3.6 Key board Test To execute the Keyboard Test select 03 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The Keyboard Test contains five subtests that test the computer’s keyboard and mouse actions. Move the highlight bar to the subtest you want to execute and press Enter . NOTE : The T[...]

Test Program for Field. 18 Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual Subtest 04 Hot Key Display [7 Key] This subtest is used for the 7 hot key and functions the same as Subtest 1. MUTE MUSIC PLAY STOP BACK NEXT WLAN Subtest 05 Hot Key Display [1 Key] This subtest is used for the 1 hot key and functions the same as Subtest 1[...]

Test Program for Field. Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual 19 LEFT PRESS RIGHT PRESS TOUCH_PAD TEST Please Do Not Press the Left and Right Button At The Same Time[...]

Test Program for Field. 3.7 Display Test To execute the Display Test select 04 from the Diagnostic Test Menu, press Enter and follow the directions displayed on the screen. The Display Test contains twelve subtests that test the display in various modes. Move the highlight bar to the subtest you want to execute and press Enter . Subtest 01 Characte[...]

Test Program for Field. Press Enter if NO was selected for Test Loop on the Test Parameter Menu. Press Ctrl + break if YES was selected for Test Loop on the Test Parameter Menu. Subtest 02 Character Set This subtest displays the character codes 00H - FFH, using Mode 01H (40*25). The screen below displays when this subtest is executed. CHARACTER SET[...]

Test Program for Field. Subtest 03 80 * 25 Character Display This subtest uses 80*25 video resolution to display character codes 20H - 7EH using Mode 03H (80*25). The data displayed is shifted 1 byte to the left for each line as shown below. 80*25 CHARACTER DISPLAY 01234567890123456789012345678901234567890123456789012345678901234567890123456789 !?[...]

Test Program for Field. Subtest 04 320 * 200 Character Display This subtest uses 320*200 video resolution to display green, red and yellow followed by cyan, magenta, and white. The screen below shows the displays when this subtest is executed. Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual 23 320 * 200 GRAPHICS DISPLAY COLOR SET[...]

Test Program for Field. 320*200 GRAPHICS DISPLAY : [ D ] BLACK D GRAY BLUE L BLUE GREEN L GREEN CYAN L CYAN RED L RED MAGENTA L MAGENTA BROWN YELLOW WHITE I WHITE Press [Enter] KEY Press ENTER to display 64 gradations of red, green, blue and white on the screen 320*200 GRAPHICS DISPLAY : [ 13 ] Press [Enter] KEY 64 gradations of red are displayed. [...]

Test Program for Field. Subtest 05 640 * 200 Character Display This subtest uses 640*200 video resolution to display three windows, each window drives a different set of dots: even dots, odd dots and all dots. The screen below displays when this subtest is executed. Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual 25 Press ENTER t[...]

Test Program for Field. Subtest 06 640 * 480 Character Display This subtest uses 640*350 video resolution to display 16 colors: black, blue, green, cyan, red, magenta, brown, white, dark gray, light blue, light green, light cyan, light red, light magenta, yellow, and intensified white. The screen below displays when this subtest is executed. 640*35[...]

Test Program for Field. 640*480 GRAPHICS DISPLAY : [12 ] BLACK DARK GRAY BLUE LIGHT BLUE GREEN LIGHT GREEN CYAN LIGHT CYAN RED LIGHT RED MAGENTA LIGHT MAGENTA BROWN YELLOW WHITE INTENSIFIED WHITE Press [Enter] KEY To exit this subtest and return to the Display Test menu: Press Enter if NO was selected for Test Loop on the Test Parameter Menu. Press[...]

Test Program for Field. Subtest 07 Display Page This subtest displays video pages zero through seven. DISPLAY PAGE 0 000000000000000000000000000000000000000000000000000000000000000 ............................................................0 0............................................................0 0...........................................[...]

Test Program for Field. Subtest 08 "H" Pattern Display This subtest displays a full screen of "H" patterns. HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHHHHHH[...]

Test Program for Field. Subtest 10 Color Graphics Display This subtest displays three colors, cyan, white and yellow on the screen as shown below. 640 * 480 GRAPHICS DISPLAY CYAN WHITE YELLOW To exit this subtest and return to the Display Test menu: Press Enter if NO was selected for Test Loop on the Test Parameter Menu. Press Ctrl + break if YES w[...]

Test Program for Field. Subtest 11 Color Attributes Display This subtest displays 16 colors: black, blue, green, cyan, red, magenta, brown, white, dark gray, light blue, light green, light cyan, light red, light magenta, yellow, and intensified white. The screen below displays when this subtest is executed. 640*480 COLOR ATTRIBUTE DISPLAY 0 1 2 3 4[...]

Test Program for Field. NOTE: The following screen does not display correctly. It will be amended in the next version. 32 Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual Press [Enter] Key Press Enter to execute the VRAM mapping test which displays a vertical line at four dot intervals using Mode 12. Press [Enter] Key Press Enter [...]

Test Program for Field. Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual 33 Press [Enter] Key To exit this subtest and return to the Display Test menu: Press Enter if NO was selected for Test Loop on the Test Parameter Menu. Press Ctrl + break if YES was selected for Test Loop on the Test Parameter Menu.[...]

Test Program for Field. 34 Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual Subtest 12 Color Tiling This subtest displays black, gray, white, and 3 gradations of red, green, and blue as shown in the following display. Black Red Green Blue Gray Red Gradation Green Gradation Blue Gradation White Red Gradation Green Gradation Blue Gr[...]

Test Program for Field. Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual 35 3.8 Floppy Disk Test CAUTION : Before running the floppy disk test, prepare a formatted work disk. Remove the diagnostics disk and insert the work disk into the FDD. The contents of the floppy disk will be erased. To execute the Floppy Disk Test select 0 5[...]

Test Program for Field. 36 Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual Subtest 04 Write Specified Address NOTE : The first two digits of the ADDRESS indicate which track is being tested, the next two digits indicates the head, and the last two digits indicate the sector. This subtest allows you to verify the errors from Subte[...]

Test Program for Field. Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual 37 3.9 Hard Disk Test To execute the Hard Disk Test select 06 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The Hard Disk Test contains eight subtests that test the functions of the hard disk drive. Move the highlight bar[...]

Test Program for Field. 38 Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual Subtest 04 Cross Talk and Peak Shift This subtest writes eight of the most likely to fail data patterns (shown below) to a cylinder on the HDD, then reads the data while moving from cylinder to cylinder. Data Pattern B5ADADH 4A5252H EB6DB6H 149249H 63B63BH[...]

Test Program for Field. Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual 39 Subtest 07 Sequential Write This subtest writes specified data to all cylinders on the HDD. The following message displays on the screen to enter the test data. TEST DATA ????(=37b3H) Subtest 08 W -R-C Specified Address This subtest writes specified data t[...]

Test Program for Field. 3.10 Real Time Clock Test To execute the Real Time Clock Test select 07 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The Real Time Clock Test contains three subtests that test the computer’s real time functions. Move the highlight bar to the subtest you want to execute and press Enter[...]

Test Program for Field. Subtest 02 Backup Memory This subtest writes 50 bytes of test data (FFH, AAH, 55H, and 00H) to the CMOS 14 th address, then reads the new data and compares it to the original data. Subtest 03 Real Time Carry CAUTION : When this subtest is executed, the current date and time are reset. This subtest checks the clock’s carry [...]

Test Program for Field. 42 Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual 3.11 Cache Memory Test To execute the Cache Memory Test select 08 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The Cach e Memory Test contains eight subtests that test the computer's cache m emory. Move the highl[...]

Test Program for Field. Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual 43 Subtest 04 Bit Shift Pattern Test This subtest reads the contents of cache memory and saves it into RAM. The subtest then writes the bit shift data patterns (1 bit shifted every 4 bytes ), reads the new data and compares the result with the original data. [...]

Test Program for Field. 44 Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual 3.12 High Resolution Display Test To execute the High Resolution Display Test select 09 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The High Resolution Display Test contains six subtests that test the computer's[...]

Test Program for Field. Subtest 02 640*480 Mode Display This subtest uses 640*480 video resolution to display a high resolution white frame, 256 letter types (8*16 pixels) and 64 gradations of white, red, green, and blue as shown below. Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual 45 [ 640*480 256 ] Press [ Enter ]key 0---+---[...]

Test Program for Field. Subtest 03 800 * 600 Mode Display This subtest uses 800*600 video resolution to display a high resolution white frame, 256 letter types (8*16 pixels) and 256 gradations of white, red, green, and blue as shown below. 46 Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual [ 800*600 256 ] Press [ Enter ] key 0---[...]

Test Program for Field. Subtest 04 1024* 768 Mode Display This subtest uses 1024*768 video resolution to display a high resolution white frame, 256 letter types (8*16 pixels) and 64 gradations of white, red, green, and blue as shown below. Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual 47 [ 1024*768 256 ] Press [ Enter ] key 0--[...]

Test Program for Field. Subtest 05 “H” Pattern Display This subtest uses the 1024*768 Mode to display a high resolution white frame, “H” letters (8*16 pixels fonts), at 128 letters by 48 lines. HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHH[...]

Test Program for Field. Subtest 06 Focus Test ( “E” Pattern) This subtest sets the 1024*768 Mode and displays “E” patterns (18*18 dot fonts), at 56 letters *42 lines surrounded by a high resolution white frame. To exit this subtest and return to the High Resolution Display Test menu: Press Enter if NO was selected for Test Loop on the Test [...]

Test Program for Field. 50 Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual 3.13 Multimedia Test To execute the Multimedia Test select 10 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The Multimedia Test contains four subtests that test the computer's m ultimedia functions. Move the highl[...]

Test Program for Field. Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual 51 3.14 MEMORY2 Test To execute the Expansion Test select 11 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The MEMORY2 Test contains four subtests that test the computer's. Move the highlight bar to the subtest you w[...]

Test Program for Field. 52 Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual Tee test method is the same as Subtest2. However, the data to be used differs. 7FFF7FFF7FFF7FFF8000800080008000 BFFFBFFFBFFFBFFF4000400040004000 DFFFDFFFDFFFDFFF2000200020002000 FFFBFFFBFFFBFFFB0004000400040004 FFFDFFFDFFFDFFFD0002000200020002 FFFEFFFEFFFE[...]

Test Program for Field. Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual 53 3.15 Error Codes and Error Status Names The following table lists the error codes and error status names for the Diagnostic Tests. Table 3-2 Error codes and error status names (1/2) Device Name Error Code Error Status Name (Common) FF Data Compare Error Me[...]

Test Program for Field. Table 3-2 Error codes and error status names (2/2) Device Name Error Code Error Status Name HDD BB Undefined Error CC Write Fault E0 Status Error F0 No Sense Error ?? Other Error Cache Memory 02 Protect Mode Error 03 Caching Error ?? Other Error Multimedia 01 Write Error 0F Invalid Drive 15 Drive Not Ready ?? Other Error NOT[...]

Test Program for Field. Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual 55 3.16 Running Test NOTES : 1. You may add or delete subtests using the Running Test Edit Item function, see Section 3.20. 2. Do not forget to insert a work disk in the FDD. If a work disk is not inserted an error will be generated during the Floppy Disk Tes[...]

Test Program for Field. 56 Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual 3.17 DMI INFOEMATION Select 03 from the Diagnostics Menu and press Enter to Check or W rite DMI Information Data: 3.17.1 Check DMI Information The Check DMI Configuration program contains the following configuration information for the computer: NOTE: Plea[...]

Test Program for Field. Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual 57 9. Project Identifier [1]LCD13”[2]LCD14”[3]LCD15”[4]LCD17” a. SLP2.0 Build Sig [1]Non OS [2]OS b. Wireless LAN ID (001E4CXXXXXX) Select 1 ~ b to keyin new data , select 0 to exit program , program will com pare input data length with the max length[...]

Test Program for Field. 58 Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual 3.17.3 Computrace Disabled The Write Computrace Inform ation to disabled computrace function before ship : The information as below : dmiStorageBase = df010h dmiStorageSize = 841h NVR 72h/0ah *** Setting SMBIOS data! *** Type 11 base 26h UUID = "e0f43[...]

Test Program for Field. 3.18 Log Utilities This function logs error information generated while a test is in progress and stores the results in RAM (Maximum error log : 500 tim es). This function can store data on a floppy disk. If the power switch is turned off, the erro r inform ation will be lost. Error information is displayed in the following [...]

Test Program for Field. 60 Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual 2. Error information displayed on the screen can be manipulated with the following number keys: The 1 key scrolls the display to the next page. The 2 key scrolls the display to the previous page. The 3 key returns to the Diagnostics Menu. The 4 key erases [...]

Test Program for Field. 3.19 System Configuration Select 05 from the Diagnostics Menu and press Enter to display the following system configuration: SYSTEM CONFIGURATION : * - BIOS VER = VX.XX KBC VER = XXXX * - MAC ADDRESS : XXXXXXXXXXXX * - 0 ASYNC ADAPTER * - 1 HDD DRIVE(S):XXXXXXXXXXXXXXXXXXXXXXXXXX FW Rev.:XXXXXXXX CUR LBA:XXXXXXXX ORG LBA:XXX[...]

Test Program for Field. 3.20 Running Test Edit Item 3.20.1 Function Description Function description lets you add or delete the subtests used to execute the Running Test. The following screen displays after pressing the Tab key to edit an item in the Running Test. KEY OPERATION Ð Cursor Down Ï Cursor Up PgDn Page Down PgUp Page Up Home Top of ITE[...]

Test Program for Field. Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual 63 1. Enter a number or 0 for Loop Count and press Enter . Select a number from 1 to 65535 to define the num ber of times the Running Test executes. Select 0 to run the test continuously until halted by the user. 2. Select the NO or YES for Error Stop and pre[...]

Test Program for Field. 3.21 Common Tests and Operation 3.21.1 How to operate a window To input parameters, or open a window use the following keys. key : to move a highlight bar [Enter] key : to select an item at the highlight bar [Esc] key : to close the current window and go back to the previous window 3.21.2 How to Stop the Test Program To stop[...]

Test Program for Field. Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual 65 Pass Count Displays the number of times the test has been executed. Error Count Displays the number of errors which have occurred during the test. Write Data Displays only the test data that has failed to compare during the test while being written during [...]

Test Program for Field. 3.21.4 Test Stop Display If an error occurs during a Subtest and YES is selected for Error Stop, the following message displays: [HALT OPERATION] 1. Test end 2. Continue 3. Retry * Select 1, 2, or 3 The three selections have the following functions: 1: Terminates the test program and exits to the subtest menu. 2: Continues t[...]

Replacement Procedures Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 4-i Chapter 4 Replacement Procedures[...]

Replacement Procedures Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 4-ii Chapter 4 Contents 4.1 Overview ................................................................................................................... .4 - 1 Safety Precautions ..............................................................................[...]

Replacement Procedures Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 4-iii Figures Figure 4-1 Remove the battery pack ................................................................................. 4-8 Figure 4-2-1 Install the battery pack ....................................................................................[...]

Replacement Procedures Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 4-iv Figure 4-22 Remove the USB Board ............................................................................... 4-47 Figure 4-23 Disconnect the power cable ......................................................................... 4-48 Figure 4-24 Remo[...]

Replacement Procedures 4 2 4.1 Overview This chapter describes the procedure for rem oving and replacing the fi eld replaceable units (FRUs) in the PC. It may not be necessary to remove all the F RUs in order to replace one. The chart below provides a guide as to whic h other FRUs must be removed before a particular FRU can be removed. The numbers [...]

Replacement Procedures Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 4-2 Safety Precautions Please read the following safety instructions before disassembling the computer and always follow the instructions w hile working on the computer. DANGER: 1. In the case of the battery, always use authentic parts or equivalent parts a[...]

Replacement Procedures Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 4-3 Before You Begin Take note of the following points before star ting work. Always remove the AC adapter and battery pack before commencing any of the procedures. The procedure for removing the battery pack is described in section “4.2.1 Battery Pack”[...]

Replacement Procedures Disassembly Procedure Three main types of cable connector are used. • Pressure plate connector • Spring connector • Normal pin connector When disconnecting a pressure plate connector, lift up the tag on one side of the plastic pressure plate on the connector and pull the cab le out from the connect or. W hen reconnectin[...]

Replacement Procedures Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 4-5 Assembly Procedure After the computer has been disassembled and th e part that caused the fault has been repaired or replaced, the computer must be reassem bled. Take note of the following general points when assembling the computer. • Take your time [...]

Replacement Procedures Screw Tightening Torque Use the following torque when tightening screws. CAUTION : Overtightening may damage screws or parts. Undertightening may allow screws to loosen (and possibly fall ou t) causing a short circuit or other damage. NOTE : To tighten screws quickly and accu rately, an electric screwdriver is recommended. ?[...]

Replacement Procedures Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 4-7 Screw Notation To make maintenance of the co mputer easier, markings of the kinds of the screws including the types and lengths are i ndicated on the computer body. Format: Screw shape + Screw length (mm) Screw shape B: Bind screw F: Thin head screw S: [...]

Replacement Procedures 4.2 Battery pack Removing the battery pack The following describes the procedure for re m oving the battery pack (See Figure 4-1). CAUTION: Take care not to shor t circuit the te rminals when removing the battery pack. Similarly, do not drop, knock, scratch, disassemble, twist, or bend the battery pack. 1. Turn off the power [...]

Replacement Procedures NOTE : Dispose of the used battery pack in a ccordance with the laws and ordinances of your local authority. Installing the battery pack The following describes the procedure for inst alling the battery pack (See Figure 4-1). CAUTION: There is a danger that the lithium ion battery pack may explode if not fitted, operated, han[...]

Replacement Procedures 4.3 PC card Removing a PC card The following describes the procedure for removing a PC card (See Figure 4-2-1). CAUTION: Insert or remove a PC card in accordan ce with any instructions in a PC card manual or the manuals of the co mputer system you are using. 1. Push the PC card . It will pop out PCMCIA Card when you release i[...]

Replacement Procedures Installing a PC card The following describes the procedure for inserting a PC card (See Figure 4-2-2). 1. Make sure the PC card does not stick out. 2. Insert a PC card and press it until it is secu rely connected. Figure 4-3-1 Insert a PC card Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 4-11[...]

Replacement Procedures Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 4-12 4.4 HDD Removing a MAIN HDD-H9.5mm / HDD-H12.5mm The following describes the procedure for removing the main HDD (See Figure 4-3 to 4-4). CAUTION: Take care not to press on the top or bottom of a HDD. Pressure may cause data loss or damage to the devic[...]

Replacement Procedures MAIN HDD Figure 4-4 Turn the compute upside down Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 4-13[...]

Replacement Procedures CAUTION: When a HDD is installed, they are inst alled in the position as the following figure. SCREW PULL TAB SCREW M2.5*5—2pcs Figure 4-5-1 Remove the MAIN HDD assembly Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 4-14[...]

Replacement Procedures 5. Remove the following screws securing the HDD holder and remove the HDD holder . • M3.0 × 3.0B FLAT BIND screw x4 SCREW M3*3—4pcs HDD H=9.5mm / H=12.5mm Figure 4-4 Remove MAIN HDD Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 4-15[...]

Replacement Procedures Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 4-16 Installing MAIN HDD-H9.5mm / HDD-H12.5mm The following describes the procedure for inst alling the main HDD (See Figure 4-3 to 4-4). 1. Install a HDD to the HDD holder and secure it with the fo llo wing screws . • M3.0 × 3.5F FLAT BIND screw x4 NOTE[...]

Replacement Procedures Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 4-17 4.5 HDD Removing second HDD-H9.5mm / HDD-H12.5mm The following describes the procedure for remo ving the second HDD (See Figure 4-3 to 4-4). CAUTION: Take care not to press on the top or bottom of a HDD. Pressure may cause data loss or damage to the de[...]

Replacement Procedures SECOND HDD Figure 4-4-1 Turn the computer upside down CAUTION: When a HDD is installed, they are inst alled in the position as the following figure. Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 4-18[...]

Replacement Procedures Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 4-19 Figure 4-4-2 Remove the SECOND HDD assembly PULL TAB SCREW SCREW M2.5*5—2pcs[...]

Replacement Procedures 8. Remove the following screws securing the HDD holder and remove the HDD holder . • M3.0 × 3.0B FLAT BIND screw x4 HDD H=9.5mm / H=12.5mm SCREW M3*3—4pcs Figure 4-4-3 Remove the screws and HDD holder Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 4-20[...]

Replacement Procedures Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 4-21 Installing Second HDD-H9.5mm / HDD-H12.5mm The following describes the procedure for installing a HDD (See Figure 4-3 to 4-4). 9. Install a HDD to the HDD holder and secure it with the fo llo wing screws . • M3.0 × 3.5F FLAT BIND screw x4 NOTE: Alth[...]

Replacement Procedures Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 4-22 4.6 Wireless LAN card Removing a Wireless LAN card The following describes the procedure for re m oving a Wireless LAN card (See Figure 4-5). 1. Remove the following screw of wireless cover securing wireless LAN card cover and remove it. And remove scr[...]

Replacement Procedures RAM Door 3 screw s Wireless LAN with 2 screws Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 4-23 Figure 4-5 Remove a wireless LAN card CN30 Wireless LAN antenna cable W ireless LAN car d[...]

Replacement Procedures Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 4-24 Installing a Wireless LAN car The following describes the procedure for inst alling a Wireless LAN card (See Figure 4-5). 1. Insert a wireless LAN card terminals slantwise into the connector on the com puter and press a wireless LAN card and lock the s[...]

Replacement Procedures Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 4-25 4.7 Memory module CAUTION: The power of the computer must be turned off when you remove a memory module. Removing a memory module with the power on risks damaging the module or the computer itself. Do not touch memory module terminals. Any dirt on the [...]

Replacement Procedures RAM Door 3 screw Figure 4-6 Remove memory slot cover Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 4-26[...]

Replacement Procedures Figure 4-6-1 Remove a memory module Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 4-27[...]

Replacement Procedures Installing a memory module To install a memory module, confirm that the com puter is in boot mode. Then perform the following procedure (See Figure 4-7). 1. Insert a memory module into the connector of the com puter slantwise (term inal side first) and press it to connect firmly. CAUTION: The power must be turned off when y o[...]

Replacement Procedures Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 4-29 4.8 Keyboard Removing the keyboard The following describes the procedure for rem o ving the keyboard (See Figure 4-8 to 4-9). CAUTION: As the keycap may fall out, when handling the keyboard always hold it by the frame and do not touch the keycap. 1. Tu[...]

Replacement Procedures KB Holder 3 screw Battery Figure 4-8 Remove screws for KB Holder Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 4-30[...]

Replacement Procedures Keyboard 2screw KB holder Keyboard Figure 4-9 Remove the keyboard/KB Holder Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 4-31[...]

Replacement Procedures Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 4-32 Installing the keyboard The following describes the procedure for inst alling the keyboard (See Figure 4-8 to 4-9). 1. Turn the keyboard upside down and place it on the palm rest as its face do wn. Connect the keyboard flexible cable to the connector o[...]

Replacement Procedures 4.9 Optical disk drive NOTE : Do not apply excessive force to the top of an optical disk d rive. Do not touch the shaded portion of the fi gure below, when the drive is removed or installed. Removing an optical disk drive The following describes the procedure for re m oving an optical disk drive (See Figure 4- 11and 4-12). 1.[...]

Replacement Procedures ODD BKT screw ODD BKT Figure 4-11 Disassemble the side bracket Installing an opt ical disk drive The following describes the procedure for inst alling an optical disk drive (See Figure 4-11 and 4-12). 1. Attach the ODD bracket to an optical disk drive and secur e it with the following screws . • M2.0 × 3.0 Flat BIND screw [...]

Replacement Procedures 4 4.10 Display assembly Removing the display assembly The following describes the procedure for rem ovi ng the display assembly (See Figure 4-13 to 4-17). 1. Close the display and turn the computer upside down. 2. Open the RAM Door and remove antenna cable Connector. M2.5x4.0 FLAT BIND (Locktight) Figure 4-12 Remove the screw[...]

Replacement Procedures 3. Remove Battery and disassembly k/b holder and keyboard screw. (please refer figure 4-8,figure4-9). M2.5x3.0 FLAT BIND (Locktight) KB holder screw * 3 KB screw * 2 M2.5x5.0 FLAT BIND (Locktight) Figure 4-12-1 Remove the KB screws Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 4-3 6[...]

Replacement Procedures 4. Disassembly TOP ASSY M2.5x8.0 M2.5x8.0 M2.5x3.0 M2.5x5.0 M2.5x5.0 M2.5x5.0 M2.5x3.0 M2.5x8.0 M2.5x6.5 M2.5x6.5 Figure 4-13 Remove the screws (from bottom side) M2.5x5.0 Figure 4-14 Remove the sc rews (from top side) Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 4-3 7[...]

Replacement Procedures 5. Pull out the wireless LAN antenna and LCD cables from the guide Antenna cable LCD cable Figure 4-15 Remove the Wireless Antenna and LCD cable Opening the display to 135degree, and remove the hinge screw. M2.5 × 6.5 FLAT BIND screw x6 (Locktight) .. M2.5x6.5 M2.5x6.5 Satellite P300 and Satellite Pro P30 0 Ma intenance Manu[...]

Replacement Procedures Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 4-39 Figure 4-16 Remove the hinge screws[...]

Replacement Procedures 6. Pulling out the pole of hinge from the hole of hinge assembly, rem ove the display assembly from the base assembly. . Display assembly Base assembly Figure 4-17 Remove the LCD harness and remove display assembly Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 4-40[...]

Replacement Procedures Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 4-41 Installing the display assembly The following describes the procedure for instal ling the display assem bly (See Figure 4-13 to 4-17). 1. Inserting the pole of hin ge to the hole of hinge assembly, set the display assembly on the base assembly. 2. Secu[...]

Replacement Procedures 4.11 Cover assembly Removing the cover assembly The following describes the procedure for removing the cover assembly (See Figure 4-19 to 4-21). 1. Turn over the computer. 2. Remove the following screws securing the cover assembly from the back and bottom of computer. • M2.0 × 5.0 FLAT BIND screw Back x4 • M2.5 × 6.5 FL[...]

Replacement Procedures 3. Disconnect the touch pad flat cable/Fingerprint cable from the connector on the system board. Finger print cable Power FFC cable TP FFC cable Figure 4-19 Disconnect the touch pa d flat cable/Fingerprint cable Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 4-43[...]

Replacement Procedures 4. Remove the following screws securing the cover assembly from the front of computer. Pull up and remove the cover assembly from the base assembly . M2.0 × 5.0 FLAT BIND screw Front x3 KB Holder Keyboard M2.5x5.0 TOP case assy Base case assy Figure 4-20 Remove the screws (front) and cover assy Satellite P300 and Satellite P[...]

Replacement Procedures Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 4-45 Installing the cover assembly The following describes the procedure for instal ling the cover assem bly (See Figure 4-19 to 4-21). 1. Install the cover assembly to the base assem bly. NOTE : Be careful not to catch the cables be tween cover assembly an[...]

Replacement Procedures 4.12 Touch pad Removing the touch pad The following describes the procedure for removing the touch pad (See Figure 4-22). 1. Peel off the glass tape and disconnect the touch pad flat cable, finger print cable from the connector on the touch pad. 2. Remove the following screws securing the touch pad plate. • M2.0 × 3.0B SUP[...]

Replacement Procedures Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 4-4 7 Installing the touch pad The following describes the procedure for in stalling the touch pad (See F igure 4-22). 1. Peel off the separator covering on the sensor portion of a new touch pad. NOTE : Do not reuse the touch pad so that it c an not be used[...]

Replacement Procedures 4.13 USB Board The following describes for removing th e cover assembly (See Figure 4-23). Removing the USB board 1. Pull out the USB cable, Modem cable, from USB board connector. 2. Loose the below screws and then incline pull out USB board. z M2.0x5.0 FLAT BIND screw x2 Modem cable USB cable Figure 4-22 Remove the USB Board[...]

Replacement Procedures 4.14 System board CAUTION: 1. when handling the system board, always hold by the edges. Do not touch the printed circuit face. 2. if replacing with a new system board, execute the subtest01 Initial configuration in section 3.3 “Setting of the hardware configu ration”. Also update with the latest BIOS as desc ribed in Appe[...]

Replacement Procedures 3. Remove the following screws securing the system board and remove the system board . (See Figure 4-26) • M2.5 × 5.0 BIND screw x4 Figure 4-24 Remove the system board Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 49[...]

Replacement Procedures Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 50 Installing the system board The following describes the procedure for inst alling the system board (See Figure 4-26). 1. Secure the system board with the following screws . • M2.5 × 5.0 BIND screw x4 2. Connect the speaker cable, USB cable, FM CABLE, [...]

Replacement Procedures 4.15 CPU Removing the CPU heat sink The following describes the procedure for re m oving the CPU heat sink (See Figure 4-27). 1. Disconnect the Heat sink cable from the connector on the system board 2. Remove the following screws securing the heat sink holder along 1 to 6. • M2.5 × 5.0 BIND screw x8 NOTE: When removing the[...]

Replacement Procedures 4. Unlock the CPU by rotating the cam on the CPU socket 120 degrees to the counterclockwise with a flat-blade screwdriver. 5. Remove the CPU . Figure 4-26 Remove the CPU Installing the CPU The following describes the procedure for inst alling the CPU (See Figure 4-27 to 4-28). 1. Check that the mark of cam is in the unlocking[...]

Replacement Procedures Figure 4-27 Apply silicon grease 6. Install the CPU heat sink and heat sink holder and secure them with the following screws along 1 to 6. M2.5 × 5.0 BIND screw x8 7. Connect the Heat sink cable to the connector on the system board NOTE: When securing the heat sink holder, be sure to secure the screws in the order of the num[...]

Replacement Procedures 4.16 LCD unit / FL inverter CAUTION: When replacing a LCD, it is required that SVP parameter is set. Update with the latest EC/KBC as describe d in Appendix H “EC/KBC Rewrite Procedures”. Removing the LCD unit / FL inverter The following describes the procedure for removing the LCD unit and FL inverter (See Figure 4-30 to[...]

Replacement Procedures 3. Pull out one insulator and peel off the other one adhered to the FL inverter. 4. Disconnect the LCD harnesses from the connectors CN1 on the FL inverter. 5. Disconnect the HV harnesses from the connectors CN2 on the FL inverter. 6. Remove the FL inverter while peeling off the double-sided tape . CN1 LCD harness FL inverte [...]

Replacement Procedures 7. Remove the following screws securing the LCD unit. • M2.5x5.0 BINK HEAD screw x4 8. With the bottom edge of the LCD unit on the display cover, lift onl y the top edge of the LCD unit. After peeling off the CONDUTIVE tape , disconnect the LCD harness from the connector on the back of the LCD. Satellite P300 and Satellite [...]

Replacement Procedures 10. Remove the following screws securing the LCD support (LC D unit side) and remove the LCD supports and LCD top bracket from the LCD unit. • M2.0x2.5 BINK screw x6 Figure 4-31 Remove the LCD supports Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 57[...]

Replacement Procedures Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 58 Installing the LCD unit/FL Inverter The following describes the procedure for inst alling the LCD unit and FL inverter (See Figure 4-31 to 4-34). 1. Install the LCD supports (LCD unit side) a nd LCD top bracket to the LCD and secure them with the followi[...]

Replacement Procedures 4.17 Application for Grease (Denka FCR-AS)/Thermal pad on North Bridge, VGA,V-RAM I. For Satellite P300, Satellite Pro P300, EQUIUM P300, SATEGO P300(Intel without VGA Board) use Thermal pad on North Bridge TSB PN RW PN Used on A000032180 JXBL5016010 N-BRIDGE THER MAL PAD BL5(JXBL5016,3A) Figure 4-32 Thermal pad on North Brid[...]

Replacement Procedures Figure 4-33 Apply silicon grease for North Bridge 4. Thermal pad used on VGA, VRAM1, VRAM2, VRAM3, VRAM4. TSB PN RW PN Used on A000032190 JXBL5017010 VGA T HERMAL PAD BL5(JXBL5017,REV3A) A000032200 JXBL5018010 VRAM1 THERMAL PAD BL5(JXBL5018,REV3A) A000032210 JXBL5019010 VRAM2 THERMAL PAD BL5(JXBL5019,REV3A) A000032220 JXBL502[...]

Replacement Procedures III. For Satellite P300D, Satellite Pro P300D, EQUIUM P300D, SATEGO P300D (AMD without VGA Board) use the thermal pad only on North Bridge. TSB PN RW PN Used on A000037540 JXBD3027010 UMA NB PAD FSL-BS BD3A(JXBD3027,3A) Figure 4-37 Thermal pad position IV. For Satellite P300D, Satellite Pro P300D, EQUIUM P300D, SATEGO P300D ([...]

Replacement Procedures Figure 4-38 Thermal pad & VRAM position NOTE: When applying for grease on North Br idge, one syringe*1cc can cover about seven repairs. Thermal pad is fixed for each one, no need special applicator and can re-use. Satellite P300 and Satellite Pro P30 0 Ma intenance Manual (960-Q08 ) 62[...]

Satellite U300 and Satellite Pro U300 Maintenance Manual(960-Q 08) App-i Appendices Appendix Contents Appendix A Handling the LCD Module ......................................................................... A-1 Appendix B Board Layout ............................................................................................... B-1 B.1 System [...]

Satellite U300 and Satellite Pro U300 Maintenance Manual(960-Q 08) App-ii C.2 CN5 INTM IC Connector1 ............................................................................... 2 C.3 CN7 Main stream MMB Connector ................................................................ 3 C.4 CN8 Power board Connector ....................................[...]

Satellite U300 and Satellite Pro U300 Maintenance Manual(960-Q 08) App-iii C.36 CN39 INT MIC Connector……………………………… ………… 30 C.37 CN40 Headphone Jack……………………………………………… … 31 C.38 CN41 SYSTEM MIC Jack………………………………… ………… 31 C.39 CN42 FM Connector……[...]

Satellite U300 and Satellite Pro U300 Maintenance Manual(960-Q 08) App-iv E.23 Swedish (SD) Keyboard....................................................................... ....E-12 E.24 Belgian ( BE ) Keyboard............................................................................E-12 E.25 Yugoslavian (YU) Keyboard..............................[...]

New Orleans-10 S10 SG10A10AG10A+10 AG+Maintenance Manu al (960-Q08 ) A-1 Appendix A Appendix A Handling the LCD Module Precautions for handling the LCD module The LCD module can be easily damaged duri ng assembly or disassembly. Observe the following precautions when handling the LCD module: 1. When installing the LCD module in the LCD cove r, be s[...]

Handling the LCD Module 3. If the panel’s surface gets dirty, wipe it with co tton or a soft cloth. If it is still dirty, try breathing on the surface to create a light cond ensate and wipe it again. If the surface is very dirty, we recomme nd a CRT cleaning agent. Apply the agent to a cloth and then wipe the panel’s surface. Do not apply clean[...]

Handling the LCD Module 5. Glass is used in the panel, so be careful not to drop it or let it strike a hard object, which could cause breakage or cracks. 6. CMOS-LSI circuits are used in the m odule, so guard against damage from electrostatic discharge. Be sure to wear a wrist or ankle ground when handling the module. New Orleans-10 S10 SG10A10AG10[...]

Handling the LCD Module 7. Do not expose the module directly to sun light or strong ultraviolet rays for long periods. 8. Do not store the module at temperatures below specifications. Cold can cause the liquid crystals to freeze, lose their elasticity or otherwise suffer damage. 9. Do not disassemble the LCD module. Disassembly can cause m alfuncti[...]

Handling the LCD Module 10. If you transport the module, do not use pack ing material which contains epoxy resin (amine) or silicon glue (alcohol or oxide). These materials can release gas that can damage the panel’s polarization. New Orleans-10 S10 SG10A10AG10A+10 AG+Maintenance Manu al (960-Q08 ) A-5[...]

Satellite P300 and Satellite Pro P300 Maintenance Manual (960 -Q08 ) B -1 Appendix B Appendix B Board Layout B.1 System Board (01) (02) ( (16) (17) (18) (19) (03) (04) 05) (06) (07) (08) (09) (10) (11) (12) (15) (14) (13) Figure B-1 System board layout (front)[...]

Board Layout Satellite P300 and Satellite Pro P300 Maintenance Manual(96 0-Q08 ) B- 2 Figure B-2 System board layout (Back) (38) (40) (42) (20) (23) (22) (21) (39) (41) (43) (44) (45) (46) (47) (48) (49) (50) (51) (52) (53) (24) (26) (27) (25) (28) (29) (30) (31) (32) (33) (34) (35) (36) (37)[...]

Board Layout Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q0 8 ) B- 3 Table B-1 System board ICs and connectors Location Function (01) CN4 M/B to panel connector (02) CN5 Internal MIC cable connector (03) CN8 M/B to Power Switch Board connector (04) CN6 M/B to Low Cost Function Board connector (05) CN7 M/B to MMB connector (06) CN9/[...]

Board Layout Satellite P300 and Satellite Pro P300 Maintenance Manual(96 0-Q08 ) B- 4 (39) CN33 Card Read er connector (40) CN30 HD DVD D ecoder Module Slot (41) CN41 External MIC Jack (42) CN40 Headph one and SPDIF Combo Jack (43) VR4 Volume Regulator (44) CN39 Internal MIC cable connector (45) U38 Azalia Audio C odec Conexant CX20561-12Z (46) CN3[...]

Board Layout B.2 MMB board Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q0 8 ) B- 5 (01) (02) 03) (04) (05) (06) (07) (08) ( Figure B-3 MMB board layout (back) Table B-2 MMB board IC and connectors Location Function (01) J1 Connect to M/B connector (02) U1 Sensor IC Quantum QT1081 (03) D1 Music Mute Button (04) D2 Media Player Butto[...]

Board Layout B.3 Low Cost Function board (01) (02) (03) (04) (05) (06) Figure B-4 Low Cost Function board layout (front) Table B-3 Low Cost Function board connectors Location Function (01) SW1 Music Mute Button (02) SW2 Media Player Button (03) SW3 Music Play / Pause Button (04) SW4 Music Stop Button (05) SW5 Music Backw ard (06) SW6 Music Forw ard[...]

Board Layout B.4 USB with RJ11 board (01) (02) Figure B-5 USB with RJ11 board layout (front) (03) (04) (05) Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q0 8 ) B- 7[...]

Board Layout Satellite P300 and Satellite Pro P300 Maintenance Manual(96 0-Q08 ) B- 8 Figure B-6 USB with RJ11 board layout ( back ) Table B-4 USB with RJ11 board connectors Location Function (01) CN2 Connect to Modem module (02) CN3 Connect to M/B USB connector (03) CN1 RJ11 connector (04) CN4 USB connector (05) CN5 USB connector[...]

Board Layout B.5 USB with FM Board (01) (02) Figure B-7 USB with FM board layout (front) (03) (04) (05) Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q0 8 ) B- 9[...]

Board Layout Satellite P300 and Satellite Pro P300 Maintenance Manual(96 0-Q08 ) B- 10 Figure B-8 USB with FM board layout ( back )[...]

Board Layout Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q0 8 ) B- 11 Table B-5 USB with FM board connectors Location Function (01) CN7 Connect to M/B FM connector (02) CN3 Connect to M/B USB connector (03) CN8 FM Jack (04) CN4 USB connector (05) CN5 USB connector[...]

Board Layout B.6 Touch Pad Board (01) (02) (05) (03) (04) (06) Figure B-9 Touch pad board layout (front) (07) (08) (09) (10) (11) (12) (13) (14) Figure B-10 Touch pad board layout ( back ) Satellite P300 and Satellite Pro P300 Maintenance Manual(96 0-Q08 ) B- 12[...]

Board Layout Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q0 8 ) B- 13 Table B-6 Touch pad board connectors Location Function (01) SW1 Mouse Button Left key (02) SW3 Mouse Button Left key (03) SW4 Mouse Button Right key (04) SW2 Mouse Button Right key (05) CN2 TP board to FP board connector (06) CN3 TP board to FP board connector (0[...]

Board Layout B.7 Power Switch Board (01) (02) Figure B-11 Power Switch board layout (front) Table B-7 Power Switch board connectors Location Function (01) SW1 Power Button (02) CN14 Pow er Switch Board to M/B connector Satellite P300 and Satellite Pro P300 Maintenance Manual(96 0-Q08 ) B- 14[...]

Board Layout B.8 Fingerprint Board (01) (02) (03) Figure B-12 Fingerprint board layout (front) Table B-8 Fingerprint board IC and connectors Location Function (01) U1 Finger Printer IC Authentec AES1610 (02) CN2 FP board to TP board connector (03) CN3 FP board to TP board connector Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q0 8 )[...]

Board Layout B.9 Mode m Board (01) (02) Figure B-13 Modem board layout (front) Table B-9 Modem board IC and connectors Location Function (01) CN1 Modem board to M/B board connector (02) MU1 Modem IC Conexant CX20548-11Z Satellite P300 and Satellite Pro P300 Maintenance Manual(96 0-Q08 ) B- 16[...]

Pin Assignment Satellite P300 and Satellite Pro P30 0 Ma intenance Manual(960-Q08 ) 1 Appendix C Pin Assignment CN4 LCD TYPE CONNECTOR CONN SMD WAFER 40P 2R MS(P1.0,H3.9) PIN No. Signal name I/O PIN No. Signal name I/O 1 INVCC0 --- 2 LCD_VCC --- 3 INVCC0 --- 4 LCD_VCC --- 5 INVCC0 --- 6 LCD_EDIDDATA I/O 7 +3V --- 8 LCD_EDIDCLK I/O 9 CCD_POWER --- 1[...]

Pin Assignment Satellite P300 and Satellite Pro P30 0 Maintenance Manual(960-Q08 ) 2 39 TXLOUT2- I/O 40 TXUOUT2- I/O 41 GND --- 42 GND --- CN5 INTMIC Connector1 CONN SMD HEADER 2P 1R MR(P1.25,H1.9) PIN No. Signal name I/O PIN No. Signal name I/O 1 MIC_GND --- 2 Analog MIC --- CN6 Low cost MMB Connector CONN SMD FPC 10P 1R FR(P1.0,H1.5) PIN No. Sign[...]

Pin Assignment Satellite P300 and Satellite Pro P30 0 Ma intenance Manual(960-Q08 ) 3 CONN SMD FPC 6P 1R FR(P1.0,H1.5) PIN No. Signal name I/O PIN No. Signal name I/O 1 +3VPCU --- 2 +5VPCU --- 3 KEY_INT I 4 GND --- 5 3ND_MBDATA I/O 6 3ND_MBCLK I/O CN8 Power board Connector CONN SMD FFC 4P 1R FR (P1.0,H1.5) PIN No. Signal name I/O PIN No. Signal nam[...]

Pin Assignment Satellite P300 and Satellite Pro P30 0 Maintenance Manual(960-Q08 ) 4 15 MY7 I 16 MY13 I 17 MY8 I 18 MY9 I 19 MY10 I 20 MY11 I 21 MY12 I 22 MY15 I 23 MX7 I 24 MX2 I 25 MX3 I 26 MX4 I 27 MX0 I 28 MX5 I 29 MX6 I 30 MX1 I 31 K_LED_P I 32 CAPSLED I 33 FN_F10 I 34 NUMLED I CN11 T/P Connector CONN SMD FFC 14P 1R FR(P0.5,H1.5) PIN No. Signa[...]

Pin Assignment Satellite P300 and Satellite Pro P30 0 Ma intenance Manual(960-Q08 ) 5 PIN No. Signal name I/O PIN No. Signal name I/O 1 FELICA_POWER --- 2 USBP5-_C I/O 3 USBP5+_C I/O 4 GND --- 5 NC --- 6 FELICA_DE --- CN13 Finger Printer CONNECTOR CONN SMD HEADER 4P 1R MR(P1.25,H1.9) PIN No. Signal name I/O PIN No. Signal name I/O 1 FINGER_POWER --[...]

Pin Assignment Satellite P300 and Satellite Pro P30 0 Maintenance Manual(960-Q08 ) 6 PIN No. Signal name I/O PIN No. Signal name I/O 1 GND O 2 USBP6-_R I/O 3 USBP6+_R I/O 4 CPUSB# I 5 T84 --- --- T89 --- 7 NEW_SMCLK I/O 8 NEW_SMDATA I/O 9 +NEW_1.5V --- 10 +NEW_1.5V --- 11 PCIE_WAKE# O 12 +NEW_3VAUX --- 13 PERST# O 14 +NEW_3V --- 15 +NEW_3V --- 16 N[...]

Pin Assignment Satellite P300 and Satellite Pro P30 0 Ma intenance Manual(960-Q08 ) 7 PIN No. Signal name I/O PIN No. Signal name I/O 1 INSPKL-N --- 2 INSPKL+N --- 3 INSPKR-N --- 4 INSPKR+N --- CN18 CRT PORT Connector CONN DIP D-SUB 15P 2R FR(H12.5,P0.76) PIN No. Signal name I/O PIN No. Signal name I/O 1 CRT_R1 O 2 CRT_G1 O 3 CRT_B1 O 4 NC --- 5 GN[...]

Pin Assignment Satellite P300 and Satellite Pro P30 0 Maintenance Manual(960-Q08 ) 8 PIN No. Signal name I/O PIN No. Signal name I/O 1 MBAT+ --- 2 MBAT+ --- 3 ID_L O 4 B/I O 5 TEMP_MBAT --- 6 MBDATA I/O 7 MBCLK I/O 8 GND --- 9 GND --- CN21 MINI-Card I (WLAN) Connector CONN SMD HEADER,52P,2R,MS(P0.8,H9) PIN No. Signal name I/O PIN No. Signal name I/[...]

Pin Assignment Satellite P300 and Satellite Pro P30 0 Ma intenance Manual(960-Q08 ) 9 29 GND --- 30 WL_SMCLK_WLA N I/O 31 GPP_TX1N_WLAN I 32 WL_SMDATA_WL AN I/O 33 GPP_TX1P_WLAN I 34 GND --- 35 GND --- 36 USBP3-_C I/O 37 NC --- 38 USBP3+_C I/O 39 +3V_WL_VDD --- 40 GND --- 41 +3V_WL_VDD --- 42 WiMAX_LED#_A --- 43 GND --- 44 NC --- 45 NC --- 46 NC --[...]

Pin Assignment Satellite P300 and Satellite Pro P30 0 Maintenance Manual(960-Q08 ) 10 PIN No. Signal name I/O PIN No. Signal name I/O 1 MVREF_DIM --- 2 GND --- 3 GND --- 4 M_B_DQ5 I/O 5 M_B_DQ4 I/O 6 M_B_DQ0 I/O 7 M_B_DQ1 I/O 8 GND --- 9 GND --- 10 M_B_DM0 I 11 M_B_DQS#0 I/O 12 GND --- 13 M_B_DQS0 I/O 14 M_B_DQ6 I/O 15 GND --- 16 M_B_DQ7 I/O 17 M_B[...]

Pin Assignment Satellite P300 and Satellite Pro P30 0 Ma intenance Manual(960-Q08 ) 11 47 GND --- 48 GND --- 49 M_B_DQS#2 I/O 50 T59 --- 51 M_B_DQS2 I/O 52 M_B_DM2 I 53 GND --- 54 GND --- 55 M_B_DQ19 I/O 56 M_B_DQ18 I/O 57 M_B_DQ23 I/O 58 M_B_DQ22 I/O 59 GND --- 60 GND --- 61 M_B_DQ29 I/O 62 M_B_DQ24 I/O 63 M_B_DQ28 I/O 64 M_B_DQ25 I/O 65 GND --- 6[...]

Pin Assignment Satellite P300 and Satellite Pro P30 0 Maintenance Manual(960-Q08 ) 12 95 +1.8VSUS --- 96 +1.8VSUS --- 97 M_B_A5 I/O 98 M_B_A4 I/O 99 M_B_A3 I/O 100 M_B_A2 I/O 101 M_B_A1 I/O 102 M_B_A0 I/O 103 +1.8VSUS --- 104 +1.8VSUS --- 105 M_B_A10 I/O 106 M_B_BS#1 I 107 M_B_BS#0 I 108 M_B_RAS# I 109 M_B_WE# I 110 M_B_CS#0 I 111 +1.8VSUS --- 112 [...]

Pin Assignment Satellite P300 and Satellite Pro P30 0 Ma intenance Manual(960-Q08 ) 13 143 M_B_DQ41 I/O 144 GND --- 145 GND --- 146 M_B_DQS#5 I/O 147 M_B_DM5 I 148 M_B_DQS5 I/O 149 GND --- 150 GND --- 151 M_B_DQ46 I/O 152 M_B_DQ47 I/O 153 M_B_DQ43 I/O 154 M_B_DQ42 I/O 155 GND --- 156 GND --- 157 M_B_DQ53 I/O 158 M_B_DQ48 I/O 159 M_B_DQ49 I/O 160 M_[...]

Pin Assignment Satellite P300 and Satellite Pro P30 0 Maintenance Manual(960-Q08 ) 14 191 M_B_DQ59 I/O 192 M_B_DQ63 I/O 193 GND --- 194 M_B_DQ58 I/O 195 DDRDAT_SMB I/O 196 GND --- 197 DDRCLK_SMB I/O 198 SA0_B --- 199 +3V --- 200 SA1_B --- CN24 DDRII SODIMM Connector2 DDR2 SO-DIMM(200P,H5.6,RVS) PIN No. Signal name I/O PIN No. Signal name I/O 1 MVRE[...]

Pin Assignment Satellite P300 and Satellite Pro P30 0 Ma intenance Manual(960-Q08 ) 15 31 M_A_DQS1 I/O 32 M_CLKOUT0# I 33 GND --- 34 GND --- 35 M_A_DQ10 I/O 36 M_A_DQ15 I/O 37 M_A_DQ14 I/O 38 M_A_DQ11 I/O 39 GND --- 40 GND --- 41 GND --- 42 GND --- 43 M_A_DQ21 I/O 44 M_A_DQ20 I/O 45 M_A_DQ17 I/O 46 M_A_DQ19 I/O 47 GND --- 48 GND --- 49 M_A_DQS#2 I/[...]

Pin Assignment Satellite P300 and Satellite Pro P30 0 Maintenance Manual(960-Q08 ) 16 79 M_CKE0 I 80 M_CKE1 I 81 +1.8VSUS --- 82 +1.8VSUS --- 83 M_A_CS#2 --- 84 M_A_A15 --- 85 M_A_BS#2 I 86 M_A_A14 --- 87 +1.8VSUS --- 88 +1.8VSUS --- 89 M_A_A12 I/O 90 M_A_A11 I/O 91 M_A_A9 I/O 92 M_A_A7 I/O 93 M_A_A8 I/O 94 M_A_A6 I/O 95 +1.8VSUS --- 96 +1.8VSUS --[...]

Pin Assignment Satellite P300 and Satellite Pro P30 0 Ma intenance Manual(960-Q08 ) 17 127 GND --- 128 GND --- 129 M_A_DQS#4 I/O 130 M_A_DM4 I 131 M_A_DQS4 I/O 132 GND --- 133 GND --- 134 M_A_DQ34 I/O 135 M_A_DQ37 I/O 136 M_A_DQ39 I/O 137 M_A_DQ35 I/O 138 GND --- 139 GND --- 140 M_A_DQ44 I/O 141 M_A_DQ40 I/O 142 M_A_DQ45 I/O 143 M_A_DQ41 I/O 144 GN[...]

Pin Assignment Satellite P300 and Satellite Pro P30 0 Maintenance Manual(960-Q08 ) 18 175 M_A_DQ51 I/O 176 M_A_DQ52 I/O 177 GND --- 178 GND --- 179 M_A_DQ56 I/O 180 M_A_DQ57 I/O 181 M_A_DQ60 I/O 182 M_A_DQ61 I/O 183 GND --- 184 GND --- 185 M_A_DM7 I 186 M_A_DQS#7 I/O 187 GND --- 188 M_A_DQS7 I/O 189 M_A_DQ59 I/O 190 GND --- 191 M_A_DQ58 I/O 192 M_A[...]

Pin Assignment Satellite P300 and Satellite Pro P30 0 Ma intenance Manual(960-Q08 ) 19 7 HDMITX0P_C O 8 GND --- 9 HDMITX0N_C O 10 HDMICLK+_C O 11 GND --- 12 HDMICLK- _C O 13 CEC I/O 14 NC --- 15 HDMI_SCL O 16 HDMI_SDA O 17 GND --- 18 DDC5V --- 19 HDMI_HPD I --- CN26 ODD CONNECTOR CONN DIP HOUSING 50P 2R FR(P0.8,H4.1) PIN No. Signal name I/O PIN No.[...]

Pin Assignment Satellite P300 and Satellite Pro P30 0 Maintenance Manual(960-Q08 ) 20 25 PDIOW# I 26 GND --- 27 PDIORDY O 28 PDDACK# I 29 IRQ14 O 30 NC --- 31 PDA1 I/O 32 DIAG# --- 33 PDA0 I/O 34 PDA2 I/O 35 PDCS1# I 36 PDCS3# O 37 ODD_LED# O 38 +5V --- 39 +5V --- 40 +5V --- 41 +5V --- 42 +5V --- 43 GND --- 44 GND --- 45 GND --- 46 GND --- 47 GND -[...]

Pin Assignment Satellite P300 and Satellite Pro P30 0 Ma intenance Manual(960-Q08 ) 21 9 PEG_RXP14 I 10 PEG_TXP14 O 11 GND --- 12 GND --- 13 PEG_RXN13 I 14 PEG_TXN13 O 15 PEG_RXP13 I 16 PEG_TXP13 O 17 GND --- 18 GND --- 19 PEG_RXN12 I 20 PEG_TXN12 O 21 PEG_RXP12 I 22 PEG_TXP12 O 23 GND --- 24 GND --- 25 PEG_RXN11 I 26 PEG_TXN11 O 27 PEG_RXP11 I 28 [...]

Pin Assignment Satellite P300 and Satellite Pro P30 0 Maintenance Manual(960-Q08 ) 22 57 PEG_RXP6 I 58 PEG_TXP6 O 59 GND --- 60 GND --- 61 PEG_RXN5 I 62 PEG_TXN5 O 63 PEG_RXP5 I 64 PEG_TXP5 O 65 GND --- 66 GND --- 67 PEG_RXN4 I 68 PEG_TXN4 O 69 PEG_RXP4 I 70 PEG_TXP4 O 71 GND --- 72 GND --- 73 PEG_RXN3 I 74 PEG_TXN3 O 75 PEG_RXP3 I 76 PEG_TXP3 O 77[...]

Pin Assignment Satellite P300 and Satellite Pro P30 0 Ma intenance Manual(960-Q08 ) 23 105 SYSFANON# O 106 EXT_HDMI_DDCDAT I/O 107 MAINON I 108 GND --- 109 GFXPG O 110 EXT_LVDS_PNLCLK I/O 111 VGA_MBDATA I/O 112 EXT_LVDS_PNLDAT I/O 113 VGA_MBCLK I/O 114 GND --- 115 EXT_LVDS_BLON O 116 EXT_VGA_RED O 117 EXT_DISP_ON O 118 GND --- 119 DVI_HPD I 120 EXT[...]

Pin Assignment Satellite P300 and Satellite Pro P30 0 Maintenance Manual(960-Q08 ) 24 153 GND --- 154 GND --- 155 GND --- 156 EXT_TV_ Y/G O 157 GND --- 158 GND --- 159 GND --- 160 EXT_TV_ COMP O 161 NC --- 162 GND --- 163 +5V --- 164 EXT_HDMICLK- O 165 +5V --- 166 EXT_HDMICLK+ O 167 NC --- 168 GND --- 169 GND --- 170 EXT_HDMITX2N O 171 NC --- 172 E[...]

Pin Assignment Satellite P300 and Satellite Pro P30 0 Ma intenance Manual(960-Q08 ) 25 CN28 RJ45 Connector CONN DIP RJ45 12P 2P FR(H8.0) PIN No. Signal name I/O PIN No. Signal name I/O 1 X-TX0P I/O 2 X-TX0N I/O 3 X-TX1P I/O 4 X-TX2P I/O 5 X-TX2N I/O 6 X-TX1N I/O 7 X-TX3P I/O 8 X-TX3N I/O 9 LAN_VCC4 --- 10 LAN_LINKLED# --- 11 LAN_VCC3 --- 12 LAN_ACT[...]

Pin Assignment Satellite P300 and Satellite Pro P30 0 Maintenance Manual(960-Q08 ) 26 13 CLK_PCIE_MINICARD I 14 LAD3_PCIE I/O 15 GND --- 16 LFRAME#_PCIE I 17 NC --- 18 GND --- 19 NC --- 20 RF_EN_WLAN I 21 GND --- 22 PLTRST# I 23 GPP_RX2N_MINICARD O 24 +3V_HD_VDD --- 25 GPP_RX2P_MINICARD O 26 GND I 27 GND --- 28 +1.5V --- 29 GND --- 30 MINI2_SMCLK I[...]

Pin Assignment Satellite P300 and Satellite Pro P30 0 Ma intenance Manual(960-Q08 ) 27 1 USBPWR0 --- 2 BUSBP7- I/O 3 BUSBP7+ I/O 4 GND --- CN32 2'nd SATA HDD Connector CONN DIP HOUSING 22P 1R FR(P1.27,H4.0) PIN No. Signal name I/O PIN No. Signal name I/O 1 GND --- 2 SATA_TXP1 I 3 SATA_TXN1 I 4 GND 5 SATA_RXN1_C O 6 SATA_RXP1_C O 7 GND --- 8 +3[...]

Pin Assignment Satellite P300 and Satellite Pro P30 0 Maintenance Manual(960-Q08 ) 28 5 XD_CE#_C I 6 XD_CL E_C O 7 XD_ALE_C I 8 XD_WE#_C I 9 SD_D2_C I/O 10 XD_WPO#_C O 11 GND --- 12 SD_D3_C I/O 13 VCC_XD --- 14 SD/MS_CLK_C I/O 15 SD_CMD_C I 16 MS_D3/XD_D0_C I/O 17 GND --- 18 MS_CD#_C I/O 19 GND --- 20 MS_D2/XD_D1_C I/O 21 VCC_XD --- 22 MS_D0/XD_D2_[...]

Pin Assignment Satellite P300 and Satellite Pro P30 0 Ma intenance Manual(960-Q08 ) 29 1 GND --- 2 SATA_TXP0 I 3 SATA_TXN0 I 4 GND --- 5 SATA_RXN0_C O 6 SATA_RXP0_C O 7 GND --- 8 +3.3VSATA1 --- 9 +3.3VSATA1 --- 10 +3.3VSATA1 --- 11 GND --- 12 GND --- 13 GND --- 14 +5V --- 15 +5V --- 16 +5V --- 17 GND --- 18 NC --- 19 GND --- 20 NC --- 21 NC --- 22 [...]

Pin Assignment Satellite P300 and Satellite Pro P30 0 Maintenance Manual(960-Q08 ) 30 CN38 1394 Port CONN DIP 1394 4P FR(P0.8,H7.2) PIN No. Signal name I/O PIN No. Signal name I/O 1 L1394_TPB0- I/O 2 L1394_TPB0+ I/O 3 L1394_TPA0- I/O 4 L1394_TPA0+ I/O CN39 INT MIC Connector CONN SMD HEADER 2P 1R MR(P1.25,H1.9) PIN No. Signal name I/O PIN No. Signal[...]

Pin Assignment Satellite P300 and Satellite Pro P30 0 Ma intenance Manual(960-Q08 ) 31 CONN DIP PHONE JACK 6P 1R FR(H6.6) PIN No. Signal name I/O PIN No. Signal name I/O 1 ADOGND --- 2 MIC1_L I 3 MIC1_R I 4 Port_B# I 5 ADOGND --- 6 NC --- CN42 FM Connector CONN SMD HOUSING 8P 1R FR(P0.5,H1.5) PIN No. Signal name I/O PIN No. Signal name I/O 1 +3V --[...]

Satellite P300 and Satellite Pro P30 0 Maintenance Manual(960-Q0 8 ) D- 1 Appendix. D Appendix D Display Codes D.1 Display Codes Table D-1 Scan codes (set 1 and set 2) (1/4) Code set 1 Code set 2 Cap No. Keytop Make Break Make Break Note 01 ‘ ~ 29 A9 0E F0 0E 02 1 ! 02 82 16 F0 16 03 2 @ 03 83 1E F0 1E 04 3 # 04 84 26 F0 26 05 4 $ 05 85 25 F0 25 [...]

Display codes Satellite P300 and Satellite Pro P300 Maintenance Manual(96 0-Q08 ) D-2 Table D-1 Scan codes (set 1 and set 2) (2/4) Code set 1 Code set 2 Cap No. Keytop Make Break Make Break Note 29 | 2B AB 5D F0 5D *5 30 Caps Lock 3A BA 58 F0 58 31 A 1E 9E 1C F0 1C 32 S 1F 9F 1B F0 1B 33 D 20 A0 23 F0 23 34 F 21 A1 2B F0 2B 35 G 22 A2 34 F0 34 36[...]

Display codes Satellite P300 and Satellite Pro P300 Maintenance Manual (960 -Q08 ) D-3 Table D-1 Scan codes (set 1 and set 2) (3/4) Code set 1 Code set 2 Cap No. Keytop Make Break Make Break Note 58 Ctrl 1D 9D 14 F0 14 *3 60 Alt (L) 38 B8 11 F0 11 *3 61 Space 39 B9 29 F0 29 62 ALT (R) E0 38 E0 B8 E0 11 E0 F0 11 75 Ins E0 52 E0 D2 E0 70 E0 F0 70 *1 [...]

Display codes Satellite P300 and Satellite Pro P300 Maintenance Manual(96 0-Q08 ) D-4 Table D-1 Scan codes (set 1 and set 2) (4/4) Code set 1 Code set 2 Cap No. Keytop Make Break Make Break Note 122 F11 57 D7 78 F0 78 *3 123 F12 58 D8 07 F0 07 *3 124 PrintSc *6 *6 *6 *6 *6 126 Pause *7 *7 *7 *7 *7 202 Fn — — — — *4 203 Win E0 5B E0 DB E0 1F[...]

Display codes Satellite P300 and Satellite Pro P300 Maintenance Manual (960 -Q08 ) D-5 Table D-2 Scan codes with left Shift key Code set 1 Code set 2 Cap No. Key top Make Break Make Brea k 55 / E0 AA E0 35 E0 B5 E0 2A E0 F0 12 E0 4A E0 F0 4A E0 12 75 INS E0 AA E0 52 E0 D2 E0 2A E0 F0 12 E0 70 E0 F0 70 E0 12 76 DEL E0 AA E0 53 E0 D3 E0 2A E0 F0 12 E[...]

Display codes Satellite P300 and Satellite Pro P300 Maintenance Manual(96 0-Q08 ) D-6 Table D-3 Scan codes in Numlock mode Code set 1 Code set 2 Cap No. Key top Make Brea k Make Break 75 INS E0 2A E0 52 E0 D2 E0 AA E0 12 E0 70 E0 F0 70 E0 F0 12 76 DEL E0 2A E0 53 E0 D3 E0 AA E0 12 E0 71 E0 F0 71 E0 F0 12 79 ← E0 2A E0 4B E0 CB E0 AA E0 12 E0 6B E[...]

Display codes Satellite P300 and Satellite Pro P300 Maintenance Manual (960 -Q08 ) D-7 Table D-5 Scan codes in overlay mode Code set 1 Code set 2 Cap No. Keytop Make Break Make Break 09 8 (8) 48 C8 75 F0 75 10 9 (9) 49 C9 7D F0 7D 11 0 (*) 37 B7 7C F0 7C 23 U (4) 4B CB 6B F0 6B 24 I (5) 4C CC 73 F0 73 25 O (6) 4D CD 74 F0 74 26 P (–) 4A CA 7B F0 [...]

Display codes Satellite P300 and Satellite Pro P300 Maintenance Manual(96 0-Q08 ) D-8 Table D-7 No.126 key scan code Code set 1 Code set 2 Key top Shift Make Make Pause Co m mo n* E1 1D 45 E1 9D C5 E1 14 77 E1 F0 14 F0 77 Ctrl* E0 46 E0 C6 E0 7E E0 F0 7E *: This key generates only make codes.[...]

1. United Status (US) K e yboard Figure 1 US Keyboard layout 2. T raditional Chinese (CH) K e yboard Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q0 8 ) 1[...]

Figure 2 CH Keyboard layout 3. Thai (TI) K eyboard Figure 3 TI Keyboard layout 4 . Ko r e a n ( KO ) Ke y b o a r d Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q0 8 ) 2[...]

Figure 4 KO Keyboard layout 5. United Kingdom (UK) K eyboard Figure 5 UK Keyboard layout Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q0 8 ) 3[...]

6. US International (UI) K eyboard Figure 6 UI Keyboard layout 7. Hebrew (HB) K e yboard Figure 7 HB Keyboard layout Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q0 8 ) 4[...]

8. Danish (DM) K eyboard Figure 8 DM Keyboard layout 9. Swiss (S W) Ke yboard Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q0 8 ) 5[...]

Figure 9 SW Keyboard layout 10. Arabic (ARE) K e yboard Figure 10 ARE Keyboard layout 11. Czech (CZ) K eyboard Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q0 8 ) 6[...]

Figure 11 CZ Keyboard layout 12. R u ssian (RU) K eyboard Figure1 2 RU Keyboard layout 13. P or tuguese (PO) K eyboard Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q0 8 ) 7[...]

Figure 13 PO Keyboard layout 14. Slo vakian (SL) K e yboard Figure 14 SL Keyboard layout Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q0 8 ) 8[...]

15. Italian (IT) K eyboard Figure 15 IT Keyboard layout 16. F rench (FR) K e yboard Figure16 FR Keyboard layout Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q0 8 ) 9[...]

17. German (GR) K eyboard Figure17 GR Keyboard layout 18. Greek (GK) K eyboard Figure18 GK Keyboard layout Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q0 8 ) 10[...]

19. Hungarian (HG) K eyboard Figure19 HG Keyboard layout 20. Spanish (SP) K eyboard Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q0 8 ) 11[...]

Figure 20 SP Keyboard layout 21. T urkish (TR) K eyboard Figure 21 TR Keyboard layout 22.T urkish F (TR-F) K eyboard Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q0 8 ) 12[...]

Figure 22 TR-F Keyboard layout 23.Swedish (SD) K eyboard Figure 23 SD Keyboard layout 24.Belgian (BE) K eyboard Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q0 8 ) 13[...]

Figure 24 BE Keyboard layout 25.Y ugoslavian (YU) K eyboard Figure 25 YU Keyboard layout 26.Nor wegian (NW) K eyboard Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q0 8 ) 14[...]

Figure 26 NW Keyboard layout 2 7 .Scandinavian (ND) K eyboard Figure 27 ND Keyboard layout Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q0 8 ) 15[...]

28.Canadian Multinational(A C )K eyboard Figure 28 AC Keyboard layout 29.Canadian Bilingual (CB) K eyboard Figure 29 CB Keyboard layout Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q0 8 ) 16[...]

30. Japanese (JP) K eyboard Figure 30 JP Keyboard layout Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q0 8 ) 17[...]

Appendix E Key Layout 1. United Status (US) K e yboard Figure US keyboard 2. T raditional Chinese (CH) Ke yboard Figur e CH keyboard Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q0 8 ) 1[...]

3. Thai (TI) K eyboard Figur e TI keyboar d 4. K orean (K O) K eyboard Figur e KO keyboard Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q0 8 ) 2[...]

5. United Kingdom (UK) K eyboard Figur e UK keyboard 6. US International (UI) K eyboard Figur e UI keyboard Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q0 8 ) 3[...]

7. Hebrew (HB) K e yboard Figur e HB keyboard 8. Danish (DM) K eyboard Figur e DM keyboard Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q0 8 ) 4[...]

9. Swiss (S W) Ke yboard Figur e SW keyboar d 10. Arabic (ARE) K e yboard Figur e ARE keyboar d Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q0 8 ) 5[...]

11. Czech (CZ) K eyboard Figur e CZ keyboard 12. R u ssian (RU) K eyboard Figur e RU keyboard Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q0 8 ) 6[...]

13. P or tuguese (PO) K eyboard Figur e PO keyboard 14. Slo vakian (SL) K e yboard Figur e SL keyboar d Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q0 8 ) 7[...]

15. Italian (IT) K eyboard Figur e IT keyboar d 16. F rench (FR) K e yboard Figur e FR keyboard Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q0 8 ) 8[...]

17. German (GR) K eyboard Figur e GR keyboard 18. Greek (GK) K eyboard Figur e GK keyboard Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q0 8 ) 9[...]

19. Hungarian (HG) K eyboard Figur e HG keyboard 20. Spanish (SP) K eyboard Figur e SP keyboar d Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q0 8 ) 10[...]

21. T urkish (TR) K eyboard Figur e TR keyboar d 22. T urkish F (TF -F) K eyboard Figur e TF-F keyboard Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q0 8 ) 11[...]

23. Swedish (SD) K e yboard Figur e SD keyboard 24. Belgian (BE) K eyboard Figur e BE keyboard Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q0 8 ) 12[...]

25. Y ugoslavian (YU) K eyboard Figur e YU keyboard 26. Nor wegian (NW) K e yboard Figur e NW keyboar d Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q0 8 ) 13[...]

2 7 . Scandinavian (ND) K eyboard Figur e ND keyboard 28. Canadian Multinational (A C) Ke yboard Figur e AC keyboar d Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q0 8 ) 14[...]

29. Canadian Bilingu al (CB) K eyboard Figur e CB keyboard 30. Japanese (JP) K eyboard Figur e JP keyboar d Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q0 8 ) 15[...]

Fehler! Formatvorlage nicht definiert. Wiring Diagrams Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlag e nicht definiert. Appendix F Appendix F Wiring Diagrams F.1 RGB Monitor ID Wraparound connector (1) RED (2) GREEN (3) BLUE (4) NC (5) GND (6) GND (7) GND (8) GND (9) 5V (10) GND (1 1) NC (12) SD [...]

Fehler! Formatvorlage nicht definiert. Wiring Diagrams Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlag e nicht definiert. Magnia 310 0 Maint e nance Manual F-2[...]

Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q08) G-1 Appendix G Appendix G BIOS Rewrite Procedures This Appendix explains how to rewrite the system BIOS program when you update the system BIOS. Tools To rewrite the BIOS, you need the following tool:  BIOS/EC/KBC rewriting disk  USB doggle Rewriting the BIOS 1. Set the system [...]

Satellite U300 and Satellite Pro U 300 Maintenance Manual(960-Q08) H-1 Appendix H Appendix H EC/KBC Rewrite Procedures Same as BIOS rewrite Procedures, please refer appendix G[...]

Satellite P300 and Satellite Pro P300 Maintenance Manual(960 -Q08) I-1 Appendix I Reliability Appendix I Reliability The following table shows MTBF (Mean Time Between Failures ) in maximum configuration . Table I-1 MTBF Component Time (hours) System 6150[...]

Reliability Satellite P300 and Satellite Pro P300 Maintenance Manual(960-Q08) I-2[...]