Uniden WDSS 5305 инструкция обслуживания

i WDSS 5305 Accessory handset for WDSS 5300 series Owner ’s Manual[...]

1 Welcome Congratulations on your purchase of the Uniden WDSS 5305 accessory handset and charger . Y ou can place this fully featured cordless handset anywhere your home has AC power . Note: Illustrations in this manual are used for explanation purposes. Some illustrations may differ from the actual unit. Important! The WDSS 5305 accessory handset [...]

2 Compatible Bases This handset is compatible with Uniden's 5.8 GHz Digital Expandable phone system: the WDSS 5300 series. Please visit our website at www .uniden.com.au for Australian model, www .uniden.co.nz for New Zealand model for the most up-to-date list of compatible bases. Installing the Accessory Handset Checking the Package Contents [...]

3 Installing the Belt Clip Line up the tabs with the holes on each side of the handset. Press the belt clip down until both tabs click into place. T o remove the belt clip, pull both sides of the clip to release the tabs from the holes. Installing the Optional Headset Y our phone may be used with an optional headset. T o use a headset, insert the h[...]

4 Registering the Handset Y ou must register the handset to the base before you can use it. Only one handset can be registered at a time. (If an accessory handset has ever been registered to a base, you must reset the handset before you can register it to a new base.) T o register to a WDSS 5300 series base, place the accessory handset in the base.[...]

5 Resetting the Handset Without the Base If the original base this handset was registered to is not available for some reason (for example, it is lost or somehow incapacitated), you can still reset the handset and use it with another base. Press and hold [ ] and [#] for more t han 5 seconds, until the SYSTEM RESET menu appears. Press [ ] to move th[...]

6 Using the Interface Parts of the Handset Headset Jack Cover Belt Clip Hole Speakerphone Speaker and Ringer Handset Battery Compartment New Message LED Handset Earpiece LCD Display [menu/clear] key [ ] key (up) [ /ash] key (talk/ash) [ ] key (phonebook/left) 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. [ * /tone] key [hold/int’com/xfer] key [redial/[...]

7 Reading the Display The handset display uses icons to tell you the status of your phone. The table below lists the icons and what they mean. Icon Status Description Standby/ T alk The battery icon indicates the handset battery status: full, medium, low , and empty .  1(( Standby The ringer off icon indicates that the ringer is turned off. T[...]

8 Using the Handset Menus T o open the menu, press [menu/clear] . Select the option you want by pressing the four-way function key . This will move the cursor; the option currently selected has a triangle beside it. Activate the selected option by pressing [select/ ] . T o exit the menu and return to standby , press [ ] . If you do not press a key [...]

9 For example, to enter "Movies": Press [6] once to enter M . Use [right] on the four-way function key to move the cursor to the right. Press [6] six times to enter o . Press [8] six times to enter v . Press [4] six times to enter i . Press [3] ve times to enter e . Press [7] eight times to enter s . Press [select/ ] to end your text e[...]

10 Using Y our Accessory Handset Making and Receiving Calls With the earpiece With the speaker phone Make a call Remove the handset from the charger . Dial the number . Press [ /ash] . 1) 2) 3) Remove the handset from the charger . Dial the number . Press [ ] . 1) 2) 3) Answer a call Pick up the handset. (If AutoT alk is on, the phone answers wh[...]

1 1 Using Caller ID and Call W aiting If you subscribe to Caller ID, you can store up to 30 Caller ID numbers in each handset. Caller ID records are stored from newest to oldest. Once your Caller ID list is full and you receive an incoming call, the oldest record will be automatically deleted to make room for the new record. T o open the Caller ID [...]

12 Using the Phonebook Y our handset can store up to 70 names and numbers in your phonebook. When all the phonebook entries are full, you will hear a beep and MEMORY FULL appears. Y ou cannot store any additional names and numbers unless you delete some of the existing ones. Press [ ] to enter the phonebook menu. Once in the phonebook menu, you hav[...]

13 Redialing a Number T o redial one of the last ve numbers dialed on this handset, press [redial/pause] when the phone is in standby . This opens the redial list. Use [ ] and [ ] to nd the number you want to dial, and press [ /ash] or [ ] .(Y ou can also press [ /ash] or [ ] , and then [redial/pause] to redial the last number dialed.) [...]

14 Using the Clarity Boost Feature If you encounter interference while you are on a call, you can manually improve the sound by turning on the clarity boost feature. Press [menu/clear] , move the cursor to select CLARITY BOOST , and then press [select/ ] . BOOST ON and appear in the display . Use the same procedure to turn off clarity boost feature[...]

15 Using Hold, Conference, T ransfer and Intercom Put a call on hold Press [hold/int'com/xfer] . If you leave a caller on hold for more than ve minutes, the call will be disconnected. T o return to the party on hold, press [ /ash] or [ ] . Join a call alrea dy in progress T o join a call already in progress, press [ / ash] or [ ] . Y [...]

16 Accessing Y our Answering Machine If your base has an answering machine, you can use your handset to get your messages and change your answering machine setup. Y ou have the following options: Play messages Press [select/ ] . The system announces the number of new and old messages and plays the message. Repeat a message Press [ ] to go to the st[...]

17 Accessing V oicemail If your base doesn't have an answering machine and you subscribe to a voice mail service, you can program your handset to automatically dial the access number . Press [menu/clear] . Move the c ursor t o HAND SET S ETUP and pr ess [s elect/ ] . Move the curso r to EDIT VOICE MAIL and pr ess [select / ] . Enter your acces[...]

18 Battery Replacement and Handling With normal usage, your battery should last about one year . If the tal k time becomes sho rt even after the battery is recharged, please replace the battery . A replacement Uniden battery may be purchased by visiting our website at; Australian model: www .uniden.com.au New Zealand model: www .uniden.co.nz W arni[...]

19[...]

20[...]

21[...]

22 Warranty UNIDEN WDSS 5305 Cordless Phone One Year Limited Warranty Note: Please keep your sales docket as it provides evidence of warranty. Warrantor: Uniden Australia Pty Limited ABN 58 001 865 498 Uniden New Zealand Limited Warranty only available in original country of purchase Elements of Warranty: Uniden warrants to the original retail owne[...]

23 ©2007 Uniden Australia Pty Limited, Uniden New Zealand Limited. Printed in China. UUZZ01646BZ(0)[...]