Weider 831.150742 инструкция обслуживания

® CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. Serial Number Decal (Under Seat) SEARS, ROEBUCK AND CO., HOFFMAN EST A TES, IL 60179 Model No. 831.150742 Serial No. Write the serial number in the space above for future reference. Visit our website at www .weiderfi[...]

W ARNING DECAL PLACEMENT 2 W ARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORT ANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . [...]

IMPORT ANT PRECAUTIONS W ARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. SEARS assumes no responsibility for personal injury or property damage sustained by or through the use o[...]

4 Backrest Weight Rests Upright Adjustment Knob Seat Adjustment T ubes Leg Lever Weight T ube Curl Pad Thank you for selecting the WEIDER ® PRO 800 weight bench. The versatile WEIDER ® PRO 800 is designed to be used with your own weight set (not included) to develop every major muscle group of the body . Whether your goal is a shapely figure, dra[...]

5 This chart is provided to help you identify the small parts used in assembly . The number in parenthesis below each part refers to the key number of the part. Important: Some parts may have been pre-assembled for shipping purposes. If you cannot find a part in the parts bags, check to see if it has been pre-assembled. M10 x 81mm Bolt (35) Spacer [...]

6 2a 2b 3 44 44 44 44 24 24 24 24 24 24 19 19 45 19 19 W arning Decal W arning Decal 43 43 43 43 45 ASSEMBL Y Before beginning assembly , carefully read the following information and instructions: • Assembly requires two people. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until a[...]

® 3 19 19 20 35 35 20 19 19 20 35 35 43 3 43 20 W arning Decal WEIDER ® PRO 800 Decal 7 30 30 7 1 1 5. Attach the Front Leg (8) to the Frame (2) with two M10 x 65mm Bolts (18), two M10 W ashers (24), and two M10 Nylon Locknuts (19). 6. T ap three 45mm Square Inner Caps (21) into the ends of the Leg Lever (4) as shown. Insert the Weight T ube (41)[...]

8 9. Lubricate the M10 x 178mm Bolt (17). Attach the Backrest (6) to the Frame (2) with the Bolt, two M10 W ashers (24), and an M10 Nylon Locknut (19). Secure the Backrest (6) by sliding the Adjustment Pin (32) through one of the three sets of holes in the adjustment tubes and the indicated hole in the Frame (2). Secure the Adjustment Pin with the [...]

15 27 26 11 1 1. Attach the Curl Pad (27) to the Curl Post (26) with two M6 x 16mm Screws (15). 12. Slide the Curl Post (26) into the Front Leg (8). Align one of the adjustment holes in the Curl Post with the adjustment hole in the Front Leg. T ighten the M10 x 48mm Adjustment Knob (33) into the adjustment hole in the Front Leg. Make sure that you [...]

10 The weight bench is designed to be used with your own weight set (not included). The steps below explain how the weight bench can be adjusted. See EXERCISE GUIDELINES on page 12 for important exercise information and refer to the accompanying exercise guide to see the correct form for several exercises. Refer also to the exercise information acc[...]

11 26 21 33 8 A TT ACHING THE CURL POST For some exercises, the Curl Post (26) must be attached to the weight bench. Slide the Curl Post (26) into the Front Leg (8). Align one of the adjustment holes in the Curl Post with the adjustment hole in the Front Leg. T ighten the M10 x 48mm Adjustment Knob (33) into the adjustment hole in the Front Leg. Ma[...]

12 THE FOUR BASIC TYPES OF WORKOUTS Muscle Building T o increase the size and strength of your muscles, push them close to their maximum capacity . Y our muscles will continually adapt and grow as you pro- gressively increase the intensity of your exercise. Y ou can adjust the intensity level of an individual exercise in two ways: • by changing t[...]

13 Rest for a short period of time after each set. The ideal resting periods are: • Rest for three minutes after each set for a muscle building workout. • Rest for one minute after each set for a toning work- out. • Rest for 30 seconds after each set for a weight loss workout. Plan to spend the first couple of weeks familiarizing yourself wit[...]

14 Key No. Qty . Description 1 2 Upright 2 1 Frame 3 1 Crossbar 4 1 Leg Lever 5 1 Right Backrest T ube 6 1 Backrest 7 2 Upright Base 8 1 Front Leg 9 6 3/4” Round Inner Cap 10 3 Pad Tube 1 1 1 Seat 12 4 1” Square Inner Cap 13 1 M8 Nylon Locknut 14 1 Pin Clip 15 6 M6 x 16mm Screw 16 4 M6 x 38mm Screw 17 1 M10 x 178mm Bolt 18 2 M10 x 65mm Bolt 19 [...]

1 7 35 19 30 28 31 11 22 21 21 4 21 22 23 9 10 10 9 9 22 22 9 29 10 9 9 22 34 34 39 38 37 38 13 33 8 21 19 40 18 24 24 20 35 19 41 14 20 19 43 44 19 27 15 26 1 7 19 35 30 31 28 34 34 20 35 20 19 43 19 40 3 6 12 12 5 25 16 16 25 25 36 42 16 46 45 45 34 34 46 24 44 24 32 2 19 19 15 17 19 19 19 24 34 34 15 EXPLODED DRA WING—Model No. 831.150742 R060[...]

FULL 90 DA Y W ARRANTY Part No. 176249 R0601A Printed in China © 2001 Sears, Roebuck and Co. The model number and serial number of your WEIDER ® PRO 800 are listed on a decal attached to the frame. See the front cover of this manual to find the location of the decal. All replacement parts are available for immediate purchase or special order when[...]