Zanussi T 733 V инструкция обслуживания

ZANUSSI ZANUSSI INSTRUCTIONS MANUAL W ASHING MACHINE T 833 V T 733 V 146 3866 00[...]

22 CONTENTS Guide to use the instruction The following symbols will be found in the text to guid you throughout the instructions : Safety instructions Hints and tips Environmental information For the user Safety instructions 23/24 Description of the appliance 25 Use of your appliance 26 Operating instructions 27/28 Programme chart 29/30 Hints &[...]

23 You must read the whole of this instruction book before using the appliance. Follow the advice carefully. Keep the book for future reference. If you sell or give away the appliance, make sure that the book is passed to the new owner. The following warnings are provided in the interest of overall safety. You must read them before installing or us[...]

24 Saf eties Lid : your washing machine is equipped with a safety avoiding the switching of the appliance when the flapdoors of the drum are opened ; the closure of the lid is so impossible. An electromechanic safety prohibits the opening of the lid when the washing machine works and 2 minutes after the end of the programme. Washing motor : in case[...]

25 DESCRIPTION OF THE APPLIANCE Detergent dispenser Symbols Washing powder for programmes with pre-wash. Washing powder or liquid detergent for the main wash. Bleach compartment. Liquid additives (fabric softener and conditioner...). 5 Softener overflow. Control panel Lid Handle for opening lid Trap door for lint filter Programme selector Control l[...]

26 USE OF Y OUR APPLIANCE The contr ol panel 1 . ON/OFF pushb utton " " Press the on/off pushbutton, the programme starts : the control lamp illuminates. 2. Contr ol lamp The control lamp illuminates when the appliance is working (on/off pushbutton " " pressed). It extinguished when the on/off pushbutton " " is pressed[...]

27 OPERA TING INSTRUCTIONS 1. Place the laundry in the drum Lift the lid. Open the drum by pressing the release button A . The two flapdoors will open automatically. Shake the laundry out loosely and place into the drum. Close the drum and shut the lid. Be careful : before closing the lid of your machine, ensure that the drum door is correctly clos[...]

28 6. Select the temperature Choose the temperature which corresponds to the chosen programme, with the help of the indica- tions or the programme table, according to the fibers and the fastness of the colours. 7. Select the spinning speed Turn this knob to choose : - a rinse hold " ", - a draining " ", - the most suitable spinn[...]

29 PR OGRAMMES CHAR T Programmes f or cotton/linen Maximum load : 5,0 kg (cotton) s e m m a r g o r P f o n o i t p i r c s e D e m m a r g o r p e h t . p m e T C ° n o i t p i r c s e D e l c y c e h t f o * s n o i t p m u s n o c e v i t a c i d n I r e t a W ) l ( y g r e n E ) h W k ( e m i T ) n i m ( A + e t i h W ° 0 9 - ° 0 6 ° 0 4 o [...]

30 Pr ogrammes for synthetics/delicates/w ool Maxim um loads : 2,5 kg (synthetics), 1 kg (w ool). ( * ) The data is given purely as an indication: the consumption values may vary in relation to the quantity and type of laundry, the temperature of the water supply and the ambient temperature. The data refers to the highest temperature provided for e[...]

31 HINTS AND TIPS W ashing hints You are advised not to leave your laundry too long, especially when damp. Damp laundry produces moult and unpleasant smells. Moult stains cannot be removed. Sor t y our laundr y . Study carefully the chart in this booklet explaining the symbols used on clothes labels (see page 14). The following points are particula[...]

32 To remove paint stains, for example, use a volatile substance such as turpentine: in this case, you should wait for it to dry completely before washing. The manufacturer of your washing machine is not responsible for any damage deriving from the use of volatile, inflammable or toxic substances. At the end of the washing Damp laundry should be dr[...]

33 W asch code symbols These symbols appear on fabric label, in order to help you to choose the best way to treat your laundry. Max. wash Temperature 95 ° C STRONG WASH BLEACHING DELICATE WASH Temperature 60 ° C Temperature 40 ° C Temperature 30 ° C Hand wash Do not wash at all Bleach in cold water Do not bleach IRONING Hot iron max 200 ° C Wa[...]

34 Bodyw ork The outside or the machine can be cleaned with warm water and a neutral non-abrasive household detergent. Wipe with clean water and dry after cleaning. Important : do not use methylated spirit, diluents or similar products. It is advisable, from time to time, to carry out a complete cycle without a washing load, adding a decalcifying p[...]

35 The wash results are not as usual. The wash results are not as usual. The wash results are not as usual. The wash results are not as usual. The wash results are not as usual. The washing cycle is very much too long. The washing cycle is very much too long. The washing cycle is very much too long. The washing cycle is very much too long. The wash[...]

36 The machine vibrates or is too noisy. The machine empties as it fills. There is water on the floor. Softener detergent flows out the overflow orifice. IF SOMETHING DOESN'T W ORK ? Check that : all the transit bolts and packing have been removed, all the feet resting firmly on the ground, the lock nuts have been secrured, the machine does no[...]

37 If you are not ab le to identify or to solve the problem, consult our service depar tment. Bef ore calling, note the brand, model and date of purchase of your machine : the ser vice depar tment will require this inf or mation. Data plate Y ou will find this inf ormation on the data plate (at the back of the appliance) and on a stic ker located o[...]

38 FOR THE INST ALLER T echnical inf ormation Dimensions height with panel 895 mm height without panel 850 mm width 397 mm depth 600 mm Power supply voltage / frequency 230 V / 50 Hz Total power absorbed 2300 W (10 A) Heater rating 1950 W Water pressure minimum 0,05 MPa (0,5 bar) maximum 0,8 MPa (8 bar) Maximum load cotton 5,0 kg synthetics 2,5 kg [...]

39 Installation The floor must be clean and dry, free from floor polish and other greasy substances, so that the machine does not slide about. Do not use any grease as lubrification. Installation on deep pile carpets and floor coverings with foam backings is not recommended, as the stability of the machine is no longer guaran- teed. If the installa[...]

40 W ater connection Connect the water inlet hose to a cold water tap with a 3/4" gas threaded orifice, after having inserted the rugger sealing washer into the hose collar (fig.1). If the water connection is made onto new pipes or onto pipes which have not been used for a long time, it is advisable to run off a certain amount of water before [...]

05/02[...]