Bosch Appliances WZ45N manual

INSTRUCTION MANUAL Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for later reference. WZ45N Integrated Day/Night IR Dome[...]

Important Safety Instructions 1. Read these instructions. 2. Keep this instruction. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean inside only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with manufacturer instructions. 8. Do not install near any heat sources su[...]

FCC Note NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. As part of its’ normal operation this device can generate radio frequency energ[...]

CE Note NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to EU Standard EN55022. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures Precautions • Do not modify • Do not put objects inside the unit. Mak[...]

TROUBLESHOOTING Before sending the camera out for repair, check the items below. If the problem persists after checking these items, contact your service center. ■ If no image appears. Is the coaxial cable attached securely? Are the power and voltage normal? Has the exposure/iris of the camera been adjusted correctly (within the OSD menu) ? Is th[...]

If this unit needs service, contact the nearest Bosch Security Systems Service Center for authorization to return and shipping instructions. Service Centers USA – Repair Center – Telephone: 800-366-2283 – Fax: 800-366-1329 – E-mail: repair@us.bosch.com – Customer Service – Telephone: 888-289-0096 – Fax: 585-223-9180 – E-mail: securi[...]

DIMENSIONS (mm)[...]

*UTP OUTPUT[...]

INSTALLATION A B D C E F[...]

*UTP OUTPUT E D C A B[...]

INSTALLATION 1 Use the supplied security tool to remove the four fixing screws (B) of dome ring (A). 2 Align the supplied mounting template with the surface to be mounted to, make marks on the surface in the places where the screw holes and cable hole are to be located. 3 Drill holes for the screws and cable hole in the surface 1inch (25mm) in diam[...]

*UTP OUTPUT CONNECTIONS AND CAMERA SETTINGS ■ CONNECTIONS D C12V / AC24V CAUTION : Check for polarity when using a DC 12V power supply.[...]

■ LENS ADJUSTMENTS 1. Adjust the pan (360 ˚ ) and tilt (70 ˚ ) position. 2. Adjust the twist position by loosening setscrews with supplied allen key and twist the camera module. 3. Set the zoom position by using the zoom thumb screw. 4. Set the focus by using the focus thumb screw. Twist adjustment setscrew (one on each side)[...]

■ CAMERA OPERATION LENS ALRAM MANUAL/DC E. SHUTT ER AUTO~1/100000 BLC AGC OFF ~36dB W B MODE MASK 1 AW C MASK 2 ATW MASK 3 MANUAL MASK 4 PUSH LOCK COLOR SET D&N MODE CAMERA ID AUTO TIT LE EDIT COLOR TIT LE RESET B/W TIT LE POSIT ION EX-CON T DPC SET LANGUAGE PC CONT. MIRROR EXIT SHARPNESS SAVE & EXIT GAMMA FACTO RY SET SLC HME DRC 5. MOTI[...]

*UTP OUTPUT A ccessibility ■ CAMERA OPERATION Joystick (JOY KEY) To access the OSD menu system press the joystick in, to navigate through the menus push the joystick to the appropriate side. Second video out connector (2ND VIDEO) To verify correct view angle and change settings using a portable monitor, this connector can be utilized with the sup[...]

■ CAMERA OPERATION EXPOSURE - LENS Select the type of lens ( MANUAL / DC) DC : Select for automatic iris control. The offset brightness of the screen is adjustable by DC level. MANUAL : Select for manual iris control. The brightness of the screen is adjustable by ELC level.[...]

EXPOSURE - E.SHUTTER This mode is selectable to either Auto or Fixed control for the electronic shutter. A UTO : Set for complete automatic operation of the electronic shutter, only available when lens iris control is set to Manual. FIXED : Set to desired minimum shutter speed, 10 levels available. 1/50s(PAL),1/60s(NTSC),1/100s,1/250s,1/500s,1/1000[...]

EXPOSURE - BLC (Back Light Compensation) When there is a strong backlight in the scene, change BLC in order to get a uniform image. ■ CAMERA OPERATION By selecting "BLC ON", BLC activity area and level are adjustable in 5 sections (TOP / DOWN / CENTER / RIGHT / LEFT). Increase the level in areas desired to become brighter for compensati[...]

■ CAMERA OPERATION COLOR - WHITE BALANCE CONTROL Screen color is adjustable in accordance with the type of ambient light on scene. A WC : Use this for color temperatures below 2500 ° C and over 9500 ° C (indoors) A TW : Use this for color temperatures between 2500 ° C and 9500 ° C (outdoors) Manual : The white balance is manually controlled. [...]

■ CAMERA OPERATION Manual : Adjust RED or BLUE in accordance with the type of ambient light on scene.[...]

■ CAMERA OPERATION COLOR - GAIN CONTROL Select the desired gain value. The higher the gain level, the more the scene displays that color. R-Y GAIN : Adjustment of RED color B-Y GAIN : Adjustment of Blue color ■ CAMERA OPERATION DAY & NIGHT (AUTO / COLOR / B/W) This function determines how day and night modes are handled. A UTO : The camera [...]

■ CAMERA OPERATION FUNCTION - MIRROR If ON is selected, the horizontal image on the screen is reversed. FUNCTION - SHARPNESS The image sharpness is adjustable.[...]

■ CAMERA OPERATION FUNCTION - GAMMA GAMMA LEVEL is selectable in 3 levels. 0.45, 0.6, 1.0. FUNCTION - SLC (SIDE LIGHT COMPENSATION) Select this mode when the corner of the screen is darker than the center. As the level increases the image becomes brighter[...]

■ CAMERA OPERATION FUNCTION - HME (High Light Masking Exposure) This function masks the bright areas on the screen. The brightness of HME is adjustable. A s the level of HME is increased, the masking area increases. FUNCTION - DRC (Dynamic Range Compensation) This function is to compensate darker images when different exposures are in one scene.[...]

■ CAMERA OPERATION MOTION DETECTION This camera feature allows you to detect the movement of an object in 64 different areas of the screen, and display an alarm on the screen. Select or deselect blue areas with the joystick, only the blue areas are monitored for movement. A LL SET : Set entire screen for movement detection. A LL CLEAR : Clear ent[...]

■ CAMERA OPERATION SHOW INDI : The motion detected indicator can be selected as icon, trace or off. Sensitivity level : As the sensitivity level increases, smaller movements are detected.[...]

DELAY OUT : The alarm signal display on the screen is delayed from 1sec to 15 sec. ■ CAMERA OPERATION[...]

■ CAMERA OPERATION PRIVACY (PRIVACY MASKING ZONE) This function sets certain areas of the screen to be hidden. 4 masking zones are available. MASK 1 : Adjust the masking area by using the joystick. MASK 2 : Adjust the masking area by using the joystick. MASK 3 : Adjust the masking area by using the joystick. MASK 4 : Adjust the masking area by us[...]

■ CAMERA OPERATION ■ CAMERA OPERATION PRIVACY - COLOR SET This function is to select the color of the masking cells. SET UP - CAMERA ID Enter a camera ID as a unique identifier.[...]

■ CAMERA OPERATION SET UP - TITLE DISPLAY Camera title is displayed on the screen when a value is entered. TITLE EDIT : Select the value TITLE RESET : Clears the title. TITLE POSITION SELECTION : Set area to display title. If editing the title, this image is displayed, select desired characters by using the joystick.[...]

■ CAMERA OPERATION SET UP - DPC SET (Defect Pixel Cancellation) This function automatically removes dead pixels in real time. WHITE THR. : For cancelling the white defective pixels. BLACK THR. : For cancelling the black defective pixels. The cancellation sensitivity of defect pixels is adjustable. For adjusting white defective pixel sensitivity, [...]

SET UP - LANGUAGE The language of the OSD menu is selectable to either English or Chinese. ■ CAMERA OPERATION ■ CAMERA OPERATION SET UP - PC CONT. PC communication is available by setting PC CONT. "ON" (not supported)[...]

■ CAMERA OPERATION EXIT EXIT : Exit the OSD menu. SAVE & EXIT : Exit the OSD menu after saving the current setting. FACTORY SET : Change setting to the factory default. (make sure to SAVE & EXIT after) NOTE : Lens, Day & Night and ID/Title settings stay the same even after a FACTORY SET.[...]

SPECIFICATIONS MO D E L Ge n e r a l Sp e c NT SC PA L CCD Type 1/3" 410K P ixels C ol or 1/3" 470k P i x els C ol or T o t al n u m be r of pixe ls 811(H ) X 508 ( V ) 795(H ) X 596 ( V ) M in illu m inat io n Re s o l u t i o n Vo l t a g e P ow er Co ns um pti on Ge n e r a l Sp e c NT SC PA L S h u t t er sp eed 1/60s - 1/100,000s 1/5[...]

Americas Bosch Security Systems, Inc. 850 Greenfield Road Lancaster, Pennsylvania 17601 USA Telephone+1 888-289-0096 Fax +1 585-223-9180 Email: security.sales@us.bosch.com www.boschsecurity.u s Europe, Middle East, Africa: Bosch Security Systems B.V. P.O. Box 80002 5600 JB Eindhoven, The Netherlands Phone: + 31 40 2577 284 Fax: +31 40 2577 330 emea[...]