Konica Minolta BIZHUB 600 manual

U ser ’ s Guide [Network Scanner Operations][...]

Introduction bizhub 750/600 x-1 Introduction Thank you for choosing this machine. This user’s guide contains details on the operation of the network connection and scanner functions of the bizhub 750 /600, precautions on its use, and ba- sic troubleshooting procedures. In order to ensure that this machine is used correctly and eff iciently, caref[...]

Introduction x-2 bizhub 750/600 Trademarks and Regi stered Trademarks KONICA MINOLTA, KONICA MINOLTA L ogo, and The essentials of imaging are registered trademarks or tradem arks of KONICA MINOLTA HOLDINGS, INC. PageScope and bizhub are registered tr ade marks or trademarks of KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. Netscape Communications, the [...]

Introduction bizhub 750/600 x-3 4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to endorse or promote products derive d from this software without prior written permission. For writt en pe rmission, please contact openssl- core@openssl.org. 5. Products derived from this softwa re may not be called “OpenSSL” nor may[...]

Introduction x-4 bizhub 750/600 Redistribution and use in source and bi nary forms, with or without modifica- tion, are permitted provided that the follow ing conditions are met: 1. Redistributions of source code must retain the copyrigh t notice, this list of conditions and the followin g disclaimer. 2. Redistributions in binary form must reproduc[...]

Introduction bizhub 750/600 x-5 Permission to use, copy, modify and di stribute this soft ware and its do cu- mentation for any purpose and without fe e is hereby granted, provided that the above copyright notice appears in al l copies and that both that copyright notice and this permission notice app e ar in supporting documentation, and that the [...]

Introduction x-6 bizhub 750/600 Portions of this code are copyrigh t © 2001-2003, Cambridg e Broadband Ltd. All rights reserved. Redistribution and use in source and bi nary forms, with or without modifica- tion, are permitted provided that the follow ing conditions are met: * Redistributions of source code must retain the above copyright notice ,[...]

Introduction bizhub 750/600 x-7 CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DIS- CLAIMED. IN NO EVENT SHA LL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR AN Y DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMEN T OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR[...]

Introduction x-8 bizhub 750/600 * Redistributions in binary form must reproduce the above copyr ight notice, this list of conditions and the followi ng disclaimer in the documentation and/ or other materials provid e d with the distribution. * Neither the name of Cisco, Inc, Beij ing University of Posts and Telecommu- nications, n or the name s of [...]

Introduction bizhub 750/600 x-9 Contents Introduction Trademarks and Regi stered Trademarks ........... ........... ........... ..... x-2 Contents ...... ........ ............ ........ ........... ......... ........... ........ ......... .......... x-9 About Th is Manual ....... ........... ........ ............ ........ ........... ......... .....[...]

Introduction x-10 bizhub 750/600 2.3 Sending Data in an E-Mail Message (Scan t o E-Mail) .......... ..........2-6 Scan to E-Ma il ........ ......... ........... ........ ............ ........ ........... ......... .... 2-6 Using Programs ......... ......... ........... ........ ........... ............ ........ ..........2-6 Selecting Group Address[...]

Introduction bizhub 750/600 x-11 Full Scan (Application) ... ............ ........... ........ ........... ............ ........ 2-64 Frame Erase (Application) ....... ........... ........... ......... ........... ........... 2-65 Center Erase (Application) ......... ........... ........... ........ ............ ........ 2-66 Non-Image Area Erase ([...]

Introduction x-12 bizhub 750/600 Program Defa ult .... ........... ........... ........ ............ ........ ........... ......... .. 3-32 Address Book Default Index .......... ........... ........ ............ ........... .....3-33 Address Type Symbol Display .... ........... ........... ............ ........ ........3-34 3.8 Setting the Save For[...]

Introduction bizhub 750/600 x-13 3.18 Enabling L DAP Settings ...... ........... ......... ........... ........ ............ ........ 3-75 Enabling LDAP Param eters ..... ........... ........... ........... ......... ........... 3-75 To specify Enabling LDAP settings ............... ........... ............ ........ 3-75 3.19 Setting Up LDAP Settin[...]

Introduction x-14 bizhub 750/600 3.29 LPD Settings ............ ........... ........ ........... ......... ........... ........ ............3-116 To specify LPD settings ........ ............ ........... ........... ........ ............3-116 3.30 Prefix/Suffix Setti ngs ... ........... ............ ........ ........... ......... ........... ...3-1[...]

Introduction bizhub 750/600 x-15 For Internet Explorer ......... ......... ........... ........ ........... ......... ........... .. 4-9 For Netscape Navigator ............... ............ ........ ........... ........... ........ 4-9 4.3 Logging O n and Logg ing Off ......... ............ ........ ........... ......... ........ 4-10 Logging Off ..[...]

Introduction x-16 bizhub 750/600 To check or c hange the registere d user information ............ ........4-49 To delete a registered user ......... ........... ......... ........... ........... ........4-51 Default Function Permiss ion ............... ............ ........... ........... ........4-52 To specify the defa ult function permi ssion s[...]

Introduction bizhub 750/600 x-17 E-Mail TX (SMT P) ................. ........ ............ ........... ........ ........... ...... 4-86 4.30 SSL/TLS ....... ........ ............ ........ ........... ......... ........... ........ ........... ...... 4-89 SSL/TLS Setting ................... ........... ......... ........... ........... ........ ....[...]

Introduction x-18 bizhub 750/600 About This Manual This User’s Guide covers the bizhub 750/600 n etwork and scanning func- tions. This section introduces the st ructure of the manual and notat ions used for product names, etc. This manual is intended for users who understan d the basic operations of computers and the machine. For oper ating proce[...]

Introduction bizhub 750/600 x-19 Explanation of Manual Conventions Ba si c Co py Oper ati on s Chap ter 3 Basic Copy Operati ons 3 bizhub 750/600 3-31 3.6 Selecting a Paper Setting The paper size can be sel ected automaticall y according to the document size or it can be sp ecified manually. Specify the paper si ze according to t he corresponding p[...]

Introduction x-20 bizhub 750/600 User’s Guides The following User’s Guides have been prepared for this machine. User’s Guide [Copy Operations] This manual contain s details on basic operations and the operatin g proce- dures for the various copy functions. - Refer to this User’s Guide for details on operating procedures for cop y functions,[...]

Introduction bizhub 750/600 x-21 IC-202 User’s Guid e/Quick Guide This manual contains det ails on oper ati ng procedures using the optional Im- age Controller (IC-202). - Refer to the User’s Guide (PDF data) provided in the User Software CD- ROM or Quick Guide (printed matter) attached to IC- 202 for the proce- dures to use the printer functio[...]

Introduction x-22 bizhub 750/600[...]

1 Before Using the Scan Funct ions Chapter 1 Before Using the Scan Functions[...]

1 Before Using the Scan Functions 1-2 bizhub 75 0/600 Before Using the Scan Funct ions Chapter 1 1 Before Using the Scan Functions 1.1 Environment Required fo r Using the Scan Functions The following conditions a re required to use the network and sca nning func- tions of this machine. - The machine is connect ed to the network. (required) The func[...]

Before Using the Scan Functions 1 bizhub 750/600 1-3 Before Using the Scan Funct ions Chapter 1 1.2 Available Scanning Functions “Scanning” refers to the operation of reading the image of a documen t fed through the ADF or placed on the original glass. The scann ing functions can be used to temporarily store the sc anne d data in the internal m[...]

1 Before Using the Scan Functions 1-4 bizhub 75 0/600 Before Using the Scan Funct ions Chapter 1 Sending the Scanned Data as Files (FTP) The scanned data is uploaded to a specified FTP server. The FTP server ad- dress, login password, and other info rmation a re entered from the touch panel of this machine. The data files uploaded to the FTP server[...]

Before Using the Scan Functions 1 bizhub 750/600 1-5 Before Using the Scan Funct ions Chapter 1 Sending the Scanned Data to a Compu ter on the Network (SMB) The scanned data can be sent to a shared folder on a specified comput er. The name of the destinat ion computer, login password, and other informa- tion are entered from the to uch panel of thi[...]

1 Before Using the Scan Functions 1-6 bizhub 75 0/600 Before Using the Scan Funct ions Chapter 1 Saving the Scanned Data in Boxes The scanned data can be saved in boxe s created on the machine’s interna l hard disk. The data ca n be used in other applications. The fi le name can be entered from the touch panel of the machin e. In addition, if the[...]

Before Using the Scan Functions 1 bizhub 750/600 1-7 Before Using the Scan Funct ions Chapter 1 1.3 Settings for Using Ne twork/Scannin g Functions It is recommended that the settings described below be specified before us- ing the network/scanning functi ons. The network settings described in “Specifying Network Setting s” must be specified fi[...]

1 Before Using the Scan Functions 1-8 bizhub 75 0/600 Before Using the Scan Funct ions Chapter 1 ! Detail For details on registering destinations and specifying setti ngs, refer to the sections listed below. “Registering Abbreviated Destinati ons” on page 3-10 “Registering Group Destinations” on page 3-22 Setting the From Address To perform[...]

Before Using the Scan Functions 1 bizhub 750/600 1-9 Before Using the Scan Funct ions Chapter 1 ! Detail For details on the scan settings, refer to “Specifying the Scan Settings” on page 2-43. Specifying Program Settings The destination a nd scan se ttings can be registered together as a single pro- gram. This is convenient for frequent ly scan[...]

1 Before Using the Scan Functions 1-10 bizhub 750/600 Before Using the Scan Funct ions Chapter 1 1.4 Connecting to the Network The machine can be connecte d to the network. 2 Reminder The machine can be conne cted via a pa rallel or USB c onnection (option- al). However, be sure to connect to the network to use the scanner func- tion. Network Conne[...]

Before Using the Scan Functions 1 bizhub 750/600 1-11 Before Using the Scan Funct ions Chapter 1 1.5 Flow Chart of Setup and Scanning Operations The sequence from the setup operat ions required to use the scanning fun c- tions to the scanning operation is shown below. Specify scan settings in the screen that appe ars after pressing the [Utility/Cou[...]

1 Before Using the Scan Functions 1-12 bizhub 750/600 Before Using the Scan Funct ions Chapter 1 2 Note Some settings that can be specifie d on the control panel can also be specified from a computer over a network using PageScope Web Con- nection. For details, refer to Chapter 4, “Specifying Settings Using Page- Scope Web Connection”. The docu[...]

2 Scanning Docu ments Chapter 2 Scanning Documents[...]

2 Scanning Do cuments 2-2 bizhub 75 0/600 Scanning Docu ments Chapter 2 2 Scanning Documents 2.1 Control Panel No. Part Na me Descri ption 1 [Power Save] key Press to enter Power Save mode. While the machine is in Power Save mode, the indicator on the [Powe r Save] key lights up in green an d the touch panel goes of f. To cance l Power Save mode, p[...]

Scanning Documents 2 bizhub 750/600 2-3 Scanning Docu ments Chapter 2 7 [Copy] key Press to enter Copy mode. (As a defau lt, the machine is in Copy mode.) While the machine is in Copy mode, the indicator on the [Copy] key lights up in green. For deta ils, refer t o the Us er’s Guide [Co py Opera - tions]. 8 [Reset] key Press to clear all settings[...]

2 Scanning Do cuments 2-4 bizhub 75 0/600 Scanning Docu ments Chapter 2 7 CAUTION To prevent damage to the touch pa nel, do not push down on the touch panel with force. % Also, do not push down on the touc h panel using hard or sharp objects.[...]

Scanning Documents 2 bizhub 750/600 2-5 Scanning Docu ments Chapter 2 2.2 Displaying the Scan Screen Display the Scan mode sc reen in or der to perform scanning operations. Turn the machine on. Wh en the machine i s ready to make copies, the Basic screen appears. Press the [Scan] ke y in the con trol pa nel to display the Scan mode screen. The disp[...]

2 Scanning Do cuments 2-6 bizhub 75 0/600 Scanning Docu ments Chapter 2 2.3 Sending Data in an E-Ma il Message (Scan to E-Mail) Scan to E-Mail The Scan to E-mail operation is used to se nd images scanned on this ma- chine to a n e-mail address as an attach ment. The methods described below are availa ble for specifying the destination. The methods [...]

Scanning Documents 2 bizhub 750/600 2-7 Scanning Docu ments Chapter 2 2 Touch [Program]. The selected destination s are listed under “Broadcast Destinations”. Other destination add resses can be added using the address book or through direct input. Only the destinat ions that can be spe cified are displayed. For example , fax destinations are n[...]

2 Scanning Do cuments 2-8 bizhub 75 0/600 Scanning Docu ments Chapter 2 5 Load the document into the ADF or po sition it on the original glass of the machine. 6 Press the [Start] key on the control panel. The document is scanned, and the data is sent. 2 Note Do not turn off the machine until the scanned jobs disappear from the job list.[...]

Scanning Documents 2 bizhub 750/600 2-9 Scanning Docu ments Chapter 2 Selecting Group Addresses “Group” refers to multiple destin ations that are registe red collectively. The following procedure describes how to se nd data by selecting a group that has been r egistered in a dvance. For details on registering groups, re fer to “Registering Pr[...]

2 Scanning Do cuments 2-10 bizhub 750/600 Scanning Docu ments Chapter 2 3 Select the desired destinat ions, and then touch [OK]. 4 Touch [Scan Settings], and then specif y the scan settings. – For details on the scan settings, refer to “Specifying the Scan Set- tings” on page 2-43. 5 After specifying the settings, touch [OK]. 6 Load the docum[...]

Scanning Documents 2 bizhub 750/600 2-11 Scanning Docu ments Chapter 2 2 Note Do not turn off the machine until the scanned jobs disappear fr om the job list.[...]

2 Scanning Do cuments 2-12 bizhub 750/600 Scanning Docu ments Chapter 2 Selecting Destinatio ns From the Address Book “Address book” refers to the collecti on of destination addresses that were registered in advance. The following procedure describes how to send data by selecting destinations from the ad dress book. Multiple addres ses can be s[...]

Scanning Documents 2 bizhub 750/600 2-13 Scanning Docu ments Chapter 2 % Administrator settings such as th e LDAP sever setting are required. For details, refer to “Enablin g LDAP Settings” on page 3-75. 3 Touch the button for a destination to se lect it. The selected bu ttons are highlighted, an d the selected destinations are listed unde r ?[...]

2 Scanning Do cuments 2-14 bizhub 750/600 Scanning Docu ments Chapter 2 ! Detail To perform LD AP searches, th e LDAP serve r settings that are specified in Administrator Setting are required. For details, refer to “Enabling LDAP Settings” on page 3-75. Up to five destinations can be comb ined from the results of an LDAP search and from those e[...]

Scanning Documents 2 bizhub 750/600 2-15 Scanning Docu ments Chapter 2 To search the destination 1 Touch [Scan Set tings], and then specify th e scan settin gs. – For details on the scan settings, ref er to “Specifying the Scan Set- tings” on page 2-43. 2 After specifying the settings, touch [OK]. 3 Load the document into the ADF or po sition[...]

2 Scanning Do cuments 2-16 bizhub 750/600 Scanning Docu ments Chapter 2 Entering the Addresses Directly “Direct input” refers to the operation of directly entering the d estination ad- dress from the ma chine’s control pan el. Up to five destinations can be combi ned from those entered directly and from the results of a n LDAP search . 1 Pres[...]

Scanning Documents 2 bizhub 750/600 2-17 Scanning Docu ments Chapter 2 3 Enter the destination addre ss, and then touch [OK]. – To specify an additi onal address, touch [N ext Dest.], and then specify the address. – Frequently entered user names and domain names can be regis- tered to be recalled and used ag ain. First, prefixes and suffixes mu[...]

2 Scanning Do cuments 2-18 bizhub 750/600 Scanning Docu ments Chapter 2 5 After specifying the settings, touch [OK]. 6 Load the document into the ADF or po sition it on the original glass of the machine. 7 Press the [Start] key on the control panel. The document is scanned, and the data is sent. 2 Note Do not turn off the machine until the scanned [...]

Scanning Documents 2 bizhub 750/600 2-19 Scanning Docu ments Chapter 2 2.4 Sending Data to a Server (Sc an to FTP) Scan to FTP The Scan to FTP operation can be used in a network en vironment with an FTP server. The scanne d data is sent to a specified folder in an FTP server on the network. This function is suitable for sending da ta of a large siz[...]

2 Scanning Do cuments 2-20 bizhub 750/600 Scanning Docu ments Chapter 2 1 Press the [Scan] ke y on the cont rol panel. The Scan mode screen appears. 2 Touch [Program]. The selected destina tions are listed unde r “Broadcast Destinations”. Other destination addresses can be added using the address book or through direct input. Only the destinati[...]

Scanning Documents 2 bizhub 750/600 2-21 Scanning Docu ments Chapter 2 – For details on the scan settings, ref er to “Specifying the Scan Set- tings” on page 2-43. 4 After specifying the settings, touch [OK]. 5 Load the document into the ADF or po sition it on the original glass of the machine. 6 Press the [Start] key on the control panel. Th[...]

2 Scanning Do cuments 2-22 bizhub 750/600 Scanning Docu ments Chapter 2 1 Press the [Scan] ke y on the cont rol panel. The Scan mode screen appears. 2 Touch [Group]. Touching the button for a group disp lays the list of members registered in the group. Other destination addresses can b e added using the ad- dress b ook or through di rect in put. 3 [...]

Scanning Documents 2 bizhub 750/600 2-23 Scanning Docu ments Chapter 2 4 Touch [Scan Set tings], and then specify th e scan settin gs. – For details on the scan settings, ref er to “Specifying the Scan Set- tings” on page 2-43. 5 After specifying the settings, touch [OK]. 6 Load the document into the ADF or po sition it on the original glass [...]

2 Scanning Do cuments 2-24 bizhub 750/600 Scanning Docu ments Chapter 2 Selecting Destinatio ns From the Address Book “Address book” refers to the collecti on of destination addresses that were registered in advance. The following procedure describes how to send data by selecting destinations from the ad dress book. Multiple addres ses can be s[...]

Scanning Documents 2 bizhub 750/600 2-25 Scanning Docu ments Chapter 2 2 Touch [Address Book]. The address book is displayed, an d registered address names are dis- played by touching the corresponding index button. ? How can the address book b e searched f or the desir ed address? % Touch [Detail Search] to search for addresses. The address b ook [...]

2 Scanning Do cuments 2-26 bizhub 750/600 Scanning Docu ments Chapter 2 4 Touch [Scan Settings], and then specif y the scan settings. – For details on the scan settings, refer to “Specifying the Scan Set- tings” on page 2-43. 5 After specifying the settings, touch [OK]. 6 Load the document into the ADF or po sition it on the original glass of[...]

Scanning Documents 2 bizhub 750/600 2-27 Scanning Docu ments Chapter 2 Entering the Addresses Directly “Direct input” re fers to th e operation of directly inputting th e destination ad- dress from the mach ine ’s control pa nel. Up to five destinations can be specified through direct input. The following procedure describes ho w to directly [...]

2 Scanning Do cuments 2-28 bizhub 750/600 Scanning Docu ments Chapter 2 3 Enter the host name, destination folder, user name, and password. – Host Name: Use the keyboard that appears in the touch panel to specify the destination host na me or IP address, and then touch [OK]. – Destination Folder: Use the keyb oard that appears in the touch pane[...]

Scanning Documents 2 bizhub 750/600 2-29 Scanning Docu ments Chapter 2 6 Enter the destination Informa tion, and th en touc h [OK]. – To specify an additi onal address, touch [N ext Dest.], and then specify the address. The addresse s that were entered are li sted under “Broadcast Destin a- tions”. 7 Touch [Scan Set tings], and then specify t[...]

2 Scanning Do cuments 2-30 bizhub 750/600 Scanning Docu ments Chapter 2 8 After specifying the settings, touch [OK]. 9 Load the document into the ADF or po sition it on the original glass of the machine. 10 Press the [Start] key on the control panel. The document is scanned, and the data is sent. 2 Note Do not turn off the machine until the scanned[...]

Scanning Documents 2 bizhub 750/600 2-31 Scanning Docu ments Chapter 2 2.5 Sending Data to a PC on the Network (Scan to SMB) Scan to SMB The Scan to SMB operation ca n be used to directly send the scanned data to a specific computer on the network. To use the Scan to File (SMB) fun ction, specify t he Windows shared file set- ting on the computer t[...]

2 Scanning Do cuments 2-32 bizhub 750/600 Scanning Docu ments Chapter 2 Settings on this machine - From [Administrator Setting] — [Network Setting] — [SMB Setting], spec- ify “v1/v2” or “v1” for the NTLM setting. Using Programs “Program” refers to a set of destinatio n computers and scan settings that are registered together. The fo[...]

Scanning Documents 2 bizhub 750/600 2-33 Scanning Docu ments Chapter 2 3 Touch [Scan Set tings] to check the specified scan set tings. The spec- ified settings can al so be changed. – For details on the scan settings, ref er to “Specifying the Scan Set- tings” on page 2-43. 4 After checking the se ttings, touch [OK]. 5 Load the document into [...]

2 Scanning Do cuments 2-34 bizhub 750/600 Scanning Docu ments Chapter 2 Selecting Group Addresses “Group” refers to multiple destin ations that are re gistered collectively. The following procedure describes how to se nd data by selecting a group that has been registered in advan ce. For details on registering groups, refe r to “Registering G[...]

Scanning Documents 2 bizhub 750/600 2-35 Scanning Docu ments Chapter 2 3 Select the desired destin ations, and then touch [OK]. 4 Touch [Scan Set tings], and then specify th e scan settin gs. – For details on the scan settings, ref er to “Specifying the Scan Set- tings” on page 2-43. 5 After specifying the settings, touch [OK]. 6 Load the doc[...]

2 Scanning Do cuments 2-36 bizhub 750/600 Scanning Docu ments Chapter 2 2 Note Do not turn off the machine until the scanned jobs disappear from the job list. Selecting Destinatio ns From the Address Book “Address book” refers to the collecti on of destination addresses that were registered in advance. The following procedure describes how to s[...]

Scanning Documents 2 bizhub 750/600 2-37 Scanning Docu ments Chapter 2 2 Touch [Address Book]. The address book is displayed, an d registered address names are dis- played by touching the corresponding index button. ? How can the address book b e searched f or the desir ed address? % Touch [Detail Search] to search for addresses. The address b ook [...]

2 Scanning Do cuments 2-38 bizhub 750/600 Scanning Docu ments Chapter 2 4 Touch [Scan Settings], and then specif y the scan settings. – For details on the scan settings, refer to “Specifying the Scan Set- tings” on page 2-43. 5 After specifying the settings, touch [OK]. 6 Load the document into the ADF or po sition it on the original glass of[...]

Scanning Documents 2 bizhub 750/600 2-39 Scanning Docu ments Chapter 2 Entering the Addresses Directly “Direct input” re fers to th e operation of directly inputting th e destination ad- dress from the mach ine ’s control pa nel. Up to five destinations can be specified through direct input. 1 Press the [Scan] ke y on the cont rol panel. The [...]

2 Scanning Do cuments 2-40 bizhub 750/600 Scanning Docu ments Chapter 2 3 Enter the destination information. – Host Name: Specify the destination host name (ent er using capital letters) or the IP address. Type in the destination name using the keyboard, and then touch [OK]. – Destination Folder: Enter the path to the destination folder using c[...]

Scanning Documents 2 bizhub 750/600 2-41 Scanning Docu ments Chapter 2 5 Touch [Scan Set tings], and then specify th e scan settin gs. – For details on the scan settings, ref er to “Specifying the Scan Set- tings” on page 2-43. 6 After specifying the settings, touch [OK]. 7 Load the document into the ADF or po sition it on the original glass [...]

2 Scanning Do cuments 2-42 bizhub 750/600 Scanning Docu ments Chapter 2 ! Detail The destination folder can also be specified by touching [Reference], the n browsing to a computer on the network. When a work group and computer th at exceed the nu mbers d escribed below exist, browsing over the networ k (subnet) of th is machine may not be performed[...]

Scanning Documents 2 bizhub 750/600 2-43 Scanning Docu ments Chapter 2 2.6 Specifying the Scan Settings Available Settings Detailed scan settings can be specified by touch ing [Scan Settings] in the Scan mode screen.[...]

2 Scanning Do cuments 2-44 bizhub 750/600 Scanning Docu ments Chapter 2 The settings that can be specifi ed are as follows: Item Description Reference File Type Selects the file type for s aving the scanned data. “File Type” on page 2-45 Resolution Sel ects the scan resolution. “Resolution” on page 2-47 Simplex/ Duplex Sel ects whe ther to [...]

Scanning Documents 2 bizhub 750/600 2-45 Scanning Docu ments Chapter 2 File Type Select the file type for saving th e scanned data. The following two file type s are available. The encryption level can be sele cted if “File Type” is set to “PDF”. File type Also, grouping of the save d data can be specified. Scan Setting To specify the File [...]

2 Scanning Do cuments 2-46 bizhub 750/600 Scanning Docu ments Chapter 2 3 Select the file type . 4 Select the scan settin g. 5 If “PDF” was sele cted, the enc ryption settings ca n be specified. If nec- essary, touch [Encrypt]. 6 Specify the encryption settings. – Encryption Level1: Select the encryption level. – Password: Enter the passwor[...]

Scanning Documents 2 bizhub 750/600 2-47 Scanning Docu ments Chapter 2 7 Touch [OK], and then touch [OK] in the next scre en that app ears. Resolution Set the scanning resolution to 200 dpi, 300 dpi, 400 dpi, or 600 dpi. 1 Touch [Scan Settings] in the Scan mode screen. 2 Touch [Resolution]. 3 Select the resolut ion. 4 Touch [OK], and then touch [OK[...]

2 Scanning Do cuments 2-48 bizhub 750/600 Scanning Docu ments Chapter 2 Simplex/Duplex Select whether to scan one side of the document or both sides. To specify the Simplex/Duplex setting 1 Touch [Scan Settings] in the Scan mode screen. 2 Touch [Simplex/Duplex]. 3 Select the scan type. 4 Touch [OK], and then touch [OK] in the next screen that appea[...]

Scanning Documents 2 bizhub 750/600 2-49 Scanning Docu ments Chapter 2 Original Ty pe Select the type according to the document. The following four image types are available. To specify the Original Type sett ing 1 Touch [Scan Settings] in the Scan mode screen. 2 Touch [Original Type]. 3 Select the image type. 4 Touch [OK], and then touch [OK] in t[...]

2 Scanning Do cuments 2-50 bizhub 750/600 Scanning Docu ments Chapter 2 Scan Size Set the paper size to be scanned. The available scan sizes are as follows: ! Detail If the documen t is read us ing the ADF, th e scan size wil l be fixed to “Au- to”. To specify the Scan Size setting 1 Touch [Scan Settings] in the Scan mode screen. 2 Touch [Scan [...]

Scanning Documents 2 bizhub 750/600 2-51 Scanning Docu ments Chapter 2 – Touch [Custom Size] to display a screen for specifying the size. Use the keyp ad or touch [-] an d [+] to specify the size. Touch [ ⇔ ] to switch between the integer and the fraction. The integer can be specified in in crements of 1 inch, and t he fraction can be specified[...]

2 Scanning Do cuments 2-52 bizhub 750/600 Scanning Docu ments Chapter 2 To enlarge/reduce the scan to a preset zoom ratio (Zoom setting) The scan can be enlarged or reduced to a preset zoom ratio, such as one of the standard sizes. 1 Touch [Scan Settings] in the Scan mode screen. 2 Touch [Zoom]. 3 Select the zoom ratio. – Touch the zoom ratio but[...]

Scanning Documents 2 bizhub 750/600 2-53 Scanning Docu ments Chapter 2 – If the values are in millimeters. 4 Touch [OK], and then touch [OK] in the next scre en that app ears.[...]

2 Scanning Do cuments 2-54 bizhub 750/600 Scanning Docu ments Chapter 2 To specify the zoom ratio for scanning (Zoom setting) The document can be scan ned at the zoom ratio set in 0.1% increments. 1 Touch [Scan Settings] in the Scan mode screen. 2 Touch [Zoom]. 3 Select the zoom ratio. – To specify a zoom ratio near a preset ratio, touch the butt[...]

Scanning Documents 2 bizhub 750/600 2-55 Scanning Docu ments Chapter 2 5 Select the desired zoom ratio type, and the n use the keypad to specify the zoom ratio. – To enlarge or reduce the scan at a zoom ratio that i s the same hor- izontally and vertically, select a z oom ratio for “Zoom with Constant X and Y Ratio”. – To enlarge or reduce [...]

2 Scanning Do cuments 2-56 bizhub 750/600 Scanning Docu ments Chapter 2 Density Specify the density for scanning. 1 Touch [Scan Setting] in the Scan mode screen. 2 Touch [Density]. – To select a specific density, touch [Light] or [Da rk]. – Touch [Std.] to select the default setting. – To scan with the density most a ppr opriate for the detec[...]

Scanning Documents 2 bizhub 750/600 2-57 Scanning Docu ments Chapter 2 Original S etting Specify the type of document that is loaded, for ex ample, if it contains mixed sizes or is folded in a zigzag. To specify the Original Settings 1 Touch [Scan Settings] in the Scan mode screen. 2 Touch [Original Setting]. Item Description Mixed Origin al Select[...]

2 Scanning Do cuments 2-58 bizhub 750/600 Scanning Docu ments Chapter 2 3 Specify the original settings. – If “Original Direction” is selecte d , a screen for selecting the direc- tion appears. Select the direct ion, and then touch [OK]. – To select the default setti ngs, touch [Reset]. – If “Bind” is selected, a screen for selecting [...]

Scanning Documents 2 bizhub 750/600 2-59 Scanning Docu ments Chapter 2 Book Scanning (Application) Select this function when scann ing page spreads. The four scanning meth- ods listed below are a vailable. In addition, f rame erasing and center e rasing can be specif ied. Shadows that occur from sca nning page spreads can be erased from the scans .[...]

2 Scanning Do cuments 2-60 bizhub 750/600 Scanning Docu ments Chapter 2 3 Touch [Book Scanning]. 4 Specify the Book Scann ing settings. – For details on the “E rase” and “Center Erase” fu nctions, refer to “Frame Erase (Application)” on page 2-65 and “Center Erase (Ap- plication)” on page 2-66. – If “Book Separation”, “Fro[...]

Scanning Documents 2 bizhub 750/600 2-61 Scanning Docu ments Chapter 2 Booklet Pagi nation (App lication) The left and right pages of a p age spread can be scan ned separately. To specify Boo klet Pagination settings 1 Touch [Scan Settings] in the Scan mode screen. 2 Touch [Application]. 3 Touch [Booklet Paginati on]. Item Description Left Bind Sel[...]

2 Scanning Do cuments 2-62 bizhub 750/600 Scanning Docu ments Chapter 2 4 Select the binding position for the document. 5 Touch [OK], and then touch [OK] in the next two scre ens that appe ar. Annotation (Application) When saving a scanned document, add the pres et domain name, sequence number, date, and time, and then save the document in a box. 1[...]

Scanning Documents 2 bizhub 750/600 2-63 Scanning Docu ments Chapter 2 4 Select the saving desti nation for the annotation user box. 5 Touch [OK] three ti mes. 2 Note If selecting an annotat ion user box, the box that was selected in [Broad- cast Destinations] is added. ! Detail Only the PDF file format can be saved. When saving data in an annotati[...]

2 Scanning Do cuments 2-64 bizhub 750/600 Scanning Docu ments Chapter 2 Full Scan (Application) The entire document ca n be scanned. 1 Touch [Scan Settings] in the Scan mode screen. 2 Touch [Application]. 3 Touch [Full S can]. – To cancel t he function, t ouch [Full Scan ] again. 4 Touch [OK], and then touch [OK] in the next screen that appears.[...]

Scanning Documents 2 bizhub 750/600 2-65 Scanning Docu ments Chapter 2 Frame Erase (Application) Erases the perimeter of the document. The width to be erased can also be specified separately for the top, left, ri ght, and bottom sides within th e range of 1/16 in. to 2 in. If the width to be erased is speci fied using the Book Erase fun ctions in t[...]

2 Scanning Do cuments 2-66 bizhub 750/600 Scanning Docu ments Chapter 2 4 Specify the width to be erase d. – To erase all sides wi th the same width, touch [Frame] and enter the value. – To specify the width separately fo r the top, left, right, and bottom sides, touch the corresponding button an d enter the value. To specify that no area is er[...]

Scanning Documents 2 bizhub 750/600 2-67 Scanning Docu ments Chapter 2 3 Touch [Center Erase]. 4 Touch [+] or [-] or use the keypad to adjust t he width of the erased area . – If the values are in millimeters. 5 Touch [OK], and then touch [OK] in the next two scre ens that appe ar.[...]

2 Scanning Do cuments 2-68 bizhub 750/600 Scanning Docu ments Chapter 2 Non-Image Area Erase (Application) The shadows along the edges of a docume nt can be erased from the scan. 1 Touch [Scan Settings] in the Scan mode screen. 2 Touch [Application]. 3 Touch [Non-Ima ge Area Erase]. – To cancel the function, t ouch [Non-Image Area Erase] again. 4[...]

Scanning Documents 2 bizhub 750/600 2-69 Scanning Docu ments Chapter 2 Neg-/Pos. Reverse (Application) The black and white areas of the docume nt can be reversed in the scan. 1 Touch [Scan Settings] in the Scan mode screen. 2 Touch [Application]. 3 Touch [Neg-/Pos. Reverse]. – To cancel the functi on, touch [Neg-/Pos. Reverse] again. 4 Touch [OK][...]

2 Scanning Do cuments 2-70 bizhub 750/600 Scanning Docu ments Chapter 2 Separate Scan The scan operat ion can be divided i nto several sessions fo r various types of documents, for example, when all pages of a document cannot be loaded into the ADF, when placing th e document on the original gl ass, or when sin- gle-sided documents are combined wit[...]

Scanning Documents 2 bizhub 750/600 2-71 Scanning Docu ments Chapter 2 4 After all pages have been scan ned, touch [Finish]. 5 Press the [Start] key.[...]

2 Scanning Do cuments 2-72 bizhub 750/600 Scanning Docu ments Chapter 2 File Name You can chan ge the file na me to be saved. ! Detail If a file name is not specified when the data was sca nned, it will au tomat- ically be specified by combining the mode and the date and tim e at the time the file was saved. For specifyin g the file name, re fer to[...]

Scanning Documents 2 bizhub 750/600 2-73 Scanning Docu ments Chapter 2 2.7 Checking the Settings Checking the Settings The selected se tting can be checke d in detail. The de stination can be changed on this screen. The settings that can be viewed an d changed are as follows: ! Detail [Edit] is not displayed when “Manua l Destination Input” is [...]

2 Scanning Do cuments 2-74 bizhub 750/600 Scanning Docu ments Chapter 2 2 Note If Changing the “From” Ad dress from [Administrator Setting] — [ System Setting] — [Restrict User Access] — [Restrict Access to job Setting] is specified as restricted, direct input cannot be performed. To check a job 1 Press the [Mode Check] key in the control[...]

Scanning Documents 2 bizhub 750/600 2-75 Scanning Docu ments Chapter 2 3 Touch [Detail]. 4 Check the details.[...]

2 Scanning Do cuments 2-76 bizhub 750/600 Scanning Docu ments Chapter 2 ? How do you correct the destination? % Touch [Edit] to display the direct input screen on which the address can be corrected. After corre cting the destination, touch [OK]. ? How do you specify the notification destination? % Touch [Set Dest.] to display the address book. Spec[...]

Scanning Documents 2 bizhub 750/600 2-77 Scanning Docu ments Chapter 2 ? Can an address th at is directly entered be registere d in the address book? % To register the address to the a ddress book, touch [Save in Add. Book]. ? What type of informati on must be entered? % Touch [Index], and then specify the characters for indexing the ad- dress in t[...]

2 Scanning Do cuments 2-78 bizhub 750/600 Scanning Docu ments Chapter 2 6 Touch [Close]. 2 Note When the settings are ch anged, the destination whose settings have been changed is moved to the end of the list of registered destinations.[...]

Scanning Documents 2 bizhub 750/600 2-79 Scanning Docu ments Chapter 2 Deleting Unneeded Destinations The selected destina tion can be deleted. 1 Press the [Mode Check] key in t he control panel whil e the Scan mode screen is displayed. The Mode Check screen appears. 2 Select the desired job from the list of registered jobs. 3 Touch [Delete]. A con[...]

2 Scanning Do cuments 2-80 bizhub 750/600 Scanning Docu ments Chapter 2 4 Touch [Yes] to delete the job. 5 Touch [Close].[...]

Scanning Documents 2 bizhub 750/600 2-81 Scanning Docu ments Chapter 2 Specifying E-Mail Settings When the data is sent , an e-mail contai ning information about the da ta, such as the file name, can be sent to a specified e-mail address. The file name is also used in Scan to FTP and Scan to SMB. The settings that can be specified are as fol lows: [...]

2 Scanning Do cuments 2-82 bizhub 750/600 Scanning Docu ments Chapter 2 To change the e-mail settings 1 Press the [Mode Check] key in the control pane l while the Sca n mode screen is displayed. The Mode Check screen appears. 2 Touch [E-Mail Setting]. A confirmation message appears. 3 Check the information an d change it a s necessary. 4 Touch [Clo[...]

Scanning Documents 2 bizhub 750/600 2-83 Scanning Docu ments Chapter 2 2.8 Checking th e Scanner Transmission Log A job list of scanner transmissions ca n be displayed from the control panel. ! Detail For details on the function of each button, refer to the User’s Guide [Copy Operations]. Displaying the Current Jobs List 1 Touch [Job List] on th [...]

2 Scanning Do cuments 2-84 bizhub 750/600 Scanning Docu ments Chapter 2 Displaying the Job History List 1 Touch [Job List]. The Print tab of the Job Li st screen appears. 2 Touch [Scan]. The Current Jobs list of the Scan tab appear s. 3 Touch [Job History]. The Active Jobs list appears in the Job History list of the Scan tab. The first screen that [...]

Scanning Documents 2 bizhub 750/600 2-85 Scanning Docu ments Chapter 2 Displayed Informatio n The following information is displayed on the Scan tab of the Job List screen. Item Description No. Displays the job ID number that is as signed when a job is registered. Type Displays the transmiss ion type. Status (o nly on the Curre nt Jobs list) Displa[...]

2 Scanning Do cuments 2-86 bizhub 750/600 Scanning Docu ments Chapter 2[...]

3 Specifying Settings Fro m the Cont rol Panel Chapter 3 Specifying Settings From the Control Panel[...]

3 Specifying S ettings From the Control Pa nel 3-2 bizhub 75 0/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 3 Specifying Settings From the Control Panel 3.1 Settings on the Contro l Panel The Utility mode is used to specify basic settings for using the machine and specifica tions for advanced fu nctions. This chapter explains how to s[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-3 Specifying Settings Fro m the Cont rol Panel Chapter 3 Administrator Setting Outputs the destinations, sub- jects, and text tha t are regist ered in this machine in a li st. “One-Touch Re gistration L ist” on page 3-36 Creates a filing number box. “Cre ating Annotation User Bo x[...]

3 Specifying S ettings From the Control Pa nel 3-4 bizhub 75 0/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 Other Related Se ttings Though the setup procedure is not cove red in this manual, there are items that are partially related to the scanning functions and network connecti on. For details on these items, refer to th e correspon[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-5 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.2 Displaying Setup Screens To display the Scan screen 1 Press the [Utility/Counter] key. – In Utility mode, an item can also be selected by pressing the key in the keypad for the number beside the desired button. For [1 One- T[...]

3 Specifying S ettings From the Control Pa nel 3-6 bizhub 75 0/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 The Scan screen appears. 2 Note To quit specifying the Utility mode sett ing, touch [Exit] in the sub display area or press the [Utility/Counter] key. Othe rwise, cance l the Utility mode by touching [Close] in each scre en unti[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-7 Specifying Settings Fro m the Cont rol Panel Chapter 3 To display the User Setting screen 1 Press the [Utility/Counter] key. 2 Touch [2 User Setting]. – In Utility mode, an item can also be selected by pressing the key in the keypad for the number beside the desired button. For “2[...]

3 Specifying S ettings From the Control Pa nel 3-8 bizhub 75 0/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 2 Note To quit specifying the Utility mode sett ing, touch [Exit] in the sub display area or press the [Utility/Counter] key. Othe rwise, cance l the Utility mode by touching [Close] in each scre en until the screen for the Copy[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-9 Specifying Settings Fro m the Cont rol Panel Chapter 3 3 Type in the password, and then touch [OK]. The Administrator Setti ng screen appears. 2 Note To quit specifying the Utility mode se tting, touch [Exit] in th e sub display area or press the [Utility/Counter] key. Otherwise, canc[...]

3 Specifying S ettings From the Control Pa nel 3-10 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.3 Registering Abbreviated Destinations Abbreviated destinations can be spe cified. Up to 2000 destinations can be registered when the optional hard disk drive is installed, and up to 100 0 des- tinations can be registered if t[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-11 Specifying Settings Fro m the Cont rol Panel Chapter 3 7 Touch [OK]. 8 Touch [Index] and touc h the desired button. – This specifies the ch aracters used to index the destination. – For destination s that are ofte n used, sp ecify [Ma in] at th e same time, and it will be easier [...]

3 Specifying S ettings From the Control Pa nel 3-12 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 2 Note To cancel changes to the setting, touch [Can cel]. To quit specifying the Utility mode sett ing, touch [Exit] in the sub display area or press the [Utility/Counter] key. Othe rwise, cance l the Utility mode by touching [C[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-13 Specifying Settings Fro m the Cont rol Panel Chapter 3 3 Touch [New]. The Register FTP screen appears. 4 Touch [Name] and typ e in the name using the keyboard that appears on the screen. 5 Touch [OK]. 6 Touch [Host Address]. – Enter the host add ress or IP address. – To enter the[...]

3 Specifying S ettings From the Control Pa nel 3-14 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 – If selecting [Host Name Input], check that the DNS settings are specified correctly before making th e selection. For details, refer to “TCP/IP Settings” on page 3-46. 7 Touch [OK]. 8 Touch [File Path] and type in the fi[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-15 Specifying Settings Fro m the Cont rol Panel Chapter 3 14 Touch [OK]. If the first character of the name i s a letter, the first character is auto- matically re gistered as the in dexing charac ter. 15 Touch [Index] and touc h the desired button. – This specifies the ch aracters us[...]

3 Specifying S ettings From the Control Pa nel 3-16 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 2 Note The registration cannot be complet ed unless settings have been speci- fied for “Name”, “Host Address”, “File Path”, “User ID”, and “Password”. ! Detail To check the registered de stination, touc h the[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-17 Specifying Settings Fro m the Cont rol Panel Chapter 3 SMB Destinations SMB destinations can be registered. 1 In the Scan screen, to uch [1 Address Book]. (R efer to page 3-5 for more details.) 2 Touch [3 SMB]. The SMB screen appears. 3 Touch [New]. The Register SMB screen appears. 4[...]

3 Specifying S ettings From the Control Pa nel 3-18 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 – To enter the IP address, touch [IP Address Input], and then enter the value. If the value was incorrectly entere d, press the [C] (clear) key to erase the value, and then us e the keypad to type in the cor- rect value. To ch[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-19 Specifying Settings Fro m the Cont rol Panel Chapter 3 – If the first characte r of the name is a l etter, the first charac ter is au- tomatically registe red as the indexi ng character. – The registration cannot be co mpleted unless setti ngs have been specified for “Name”, [...]

3 Specifying S ettings From the Control Pa nel 3-20 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 Box Destinations Box destinations ca n be registered. The Box destination s can be used when the optional hard disk drive is installed. 1 In the Scan screen, to uch [1 Address Book]. (R efer to page 3-5 for more details.) 2 Touc[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-21 Specifying Settings Fro m the Cont rol Panel Chapter 3 – If the first characte r of the name is a l etter, the first charac ter is au- tomatically registe red as the indexi ng character. – The registration cannot be co mpleted unless setti ngs have been specified fo r “Name” [...]

3 Specifying S ettings From the Control Pa nel 3-22 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.4 Registering Group Destinations Group destinations can be registered. Up to 100 groups can be registered. Up to 500 destina tions can be regis- tered to one group. To regist er a group destinatio n 1 In the Scan screen , touc[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-23 Specifying Settings Fro m the Cont rol Panel Chapter 3 6 Touch [Close]. – To check the registered destinati ons, touch [Check Setting]. – The registration cannot be co mpleted unless setti ngs have been specified for “Name” and “Destination”. 7 Touch [OK]. The group desti[...]

3 Specifying S ettings From the Control Pa nel 3-24 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.5 Registering Program Dest inations Program destination s can be registered. Only one destin ation can be regis- tered in a program. Up to 400 destinatio ns can be registered in program des- tinations, including fax program de[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-25 Specifying Settings Fro m the Cont rol Panel Chapter 3 6 Touch [Destination]. – To select from registered destinations: Check that [Select from Address B ook] is selected, touch the but- ton for the desired destination ty pe, and then sele ct the destina- tions to be registered. ?[...]

3 Specifying S ettings From the Control Pa nel 3-26 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 2 Note To cancel changes to the setting, touch [Can cel]. To quit specifying the Utility mode sett ing, touch [Exit] in the sub display area or press the [Utility/Counter] key. Othe rwise, cance l the Utility mode by touching [C[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-27 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.6 Specifying E-Mail Settings Up to 10 e-mail su bjects an d text can be registered. Subject E-Mail subj ects can be regi stered. 1 In the Scan screen, tou ch [4 Subjec t/Text (for E-mail)]. (Refer to page 3-5 for more details.)[...]

3 Specifying S ettings From the Control Pa nel 3-28 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 2 Note The registration cannot be completed unless a setting is specified for “Subject”. ! Detail To check the registered setting, touch the button for the desired subject, and then touch [Det ails]. To delete the registered[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-29 Specifying Settings Fro m the Cont rol Panel Chapter 3 Text E-mail text can be re gistered. The settings that we re registered when the data was sent can be selected. 1 In the Scan screen, tou ch [4 Subjec t/Text (for E-mail)]. (Refer to page 3-5 for more details.) 2 Touch [2 Text]. [...]

3 Specifying S ettings From the Control Pa nel 3-30 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 2 Note The registration cannot be completed unless a setting is specified for “Text”. ! Detail To check the registered setting, touch the button for the desired text, and then touch [Details]. To delete the registered settin[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-31 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.7 Setting the Main Scan Mode Screen Default Tab The default screen that appears in Scan mode can be specified. (Default set- ting: Program) 1 In the User Setting screen, touch [2 Display Setti ng]. (Refer to page 3-7 for more d[...]

3 Specifying S ettings From the Control Pa nel 3-32 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 Program Default The default screen that appears in th e Program tab in Scan mode c an be specifie d. (Defaul t setting: PAGE1 ) 1 In the User Setting screen, touch [2 Display Setting]. – To display the User Setting screen, ref[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-33 Specifying Settings Fro m the Cont rol Panel Chapter 3 Address Book Default Index You can select the index type that is displayed in the address book . (Default setting: Main) 1 In the User Setting screen, touch [2 Display Setting]. 2 Touch [3 Scan Basic Scre en Default Setting]. 3 T[...]

3 Specifying S ettings From the Control Pa nel 3-34 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 Address Ty pe Symbol Display You can specify whether to display th e symbol of the address type. (Default setting: ON) 1 In the User Setting screen, touch [2 Display Setting]. 2 Touch [3 Scan Basic Screen Def ault Setting]. 3 To[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-35 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.8 Setting the Save Format of the Data to Be Scanned Black Compression Level The black compre ssion level can be specifi ed. (Default set ting: MMR) - [MH]: The data size is large. - [MMR]: The data size is small. To specify the[...]

3 Specifying S ettings From the Control Pa nel 3-36 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.9 One -Touch Registrati on List You can output the destinations, subjects, and text that are registered in this machine in a list. The type of lists that can be output are described below. Address Boo k List 1 In the Administr[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-37 Specifying Settings Fro m the Cont rol Panel Chapter 3 4 Select the registration number and des tination type, and then touch [Print]. 2 Note To display the Adminis trator Setting sc reen, refer to “To display the Ad- ministrator Setting screen” on page 3-8. Group List 1 In the A[...]

3 Specifying S ettings From the Control Pa nel 3-38 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 3 Touch [2 Group List]. 4 Select the registration number, and then touch [Pri nt]. 2 Note To display the Administrator Setting sc reen, refer to “To display the Ad- ministrator Setting screen” on page 3-8. Program List 1 In [...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-39 Specifying Settings Fro m the Cont rol Panel Chapter 3 3 Touch [3 Program List]. 4 Select the registration number and des tination type, and then touch [Print]. 2 Note To display the Adminis trator Setting sc reen, refer to “To display the Ad- ministrator Setting screen” on page [...]

3 Specifying S ettings From the Control Pa nel 3-40 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 3 Touch [4 E-Mail Su bject/Text List]. 4 Select the paper size, and simplex or duplex printing, and then press [Start] key. 2 Note To display the Administrator Setting sc reen, refer to “To display the Ad- ministrator Setting [...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-41 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.10 Creating Annota tion User Boxes Annotation user boxes can be u sed only if the optional hard disk drive is in- stalled . 2 Note Register the annotation user boxes from the Administrator Setting screen. To display the Adminis[...]

3 Specifying S ettings From the Control Pa nel 3-42 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 2 Reminder If “Password Rules” is set to “ON” , a password con taining less than 8 characters cannot be regi stered. If a box password containing less than 8 cha racters has already been registered, chan ge the password [...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-43 Specifying Settings Fro m the Cont rol Panel Chapter 3 3 Touch [4 Annotation User Box]. 4 Touch [New]. The registration screen appears. 5 Specify the various settings for the box. 6 Touch [Fwd.]. Registration scre en 2/3 appears.[...]

3 Specifying S ettings From the Control Pa nel 3-44 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 7 Specify the desired settin gs. 8 Touch [Fwd.]. Registration scre en 3/3 appears. 9 Specify the desired settin gs. 10 Touch [OK]. 11 Touch [Close]. The box is registered.[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-45 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.11 Specifying Network Settings Whether or not a network is used can be specif ied. To specify network settings 1 In the Administrator Setting sc reen, touch [5 Network Setting]. 2 In the Net work Setting screen , touch [1 Netwo[...]

3 Specifying S ettings From the Control Pa nel 3-46 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.12 TCP/IP Settings The settings for using the machine on a TCP/IP network can be specified. To activate all network se tting changes, turn the main power off and then back on. 2 Reminder When turning the main power switch OFF [...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-47 Specifying Settings Fro m the Cont rol Panel Chapter 3 Items To Be Specified The following items are specifi ed. TCP/IP Setting screen 1 /5 TCP/IP Setting screen 2 /5 TCP/IP Setting screen 3 /5 TCP/IP Setting screen 4 /5 Item Description TCP/IP Setting Specify whether to turn on the [...]

3 Specifying S ettings From the Control Pa nel 3-48 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 TCP/IP Setting screen 5/5 2 Note Be sure to enter t he host name an d domain name so that the total number of characte rs entered is within 254 characters. To specify TCP/IP settings 1 In the Administrator Setting screen, to uch[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-49 Specifying Settings Fro m the Cont rol Panel Chapter 3 – If [Auto Input] was selected un der “I P Address Setting Method”, specify the automatic ac quisition procedure, an d then touch [OK]. 6 Touch [Fwd. → ]. TCP/IP Setti ng screen 3/5 app ears. 7 Specify the desired setting[...]

3 Specifying S ettings From the Control Pa nel 3-50 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 9 Specify the desired settin gs. 10 Touch [Fwd. → ]. TCP/IP Setti ng screen 5/5 app ears. 11 Specify the desired settin gs. 12 Touch [OK]. The TCP/IP settings are applied. 2 Note To cancel changes to the setting, touch [Can ce[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-51 Specifying Settings Fro m the Cont rol Panel Chapter 3 IP Filtering The IP addresses in the specified ra nges can be permitted or denied. IP addresses can connect d epending on whether “Enable” or “Disable” has been selected for “P ermit Access” and “Deny Acce ss” in [...]

3 Specifying S ettings From the Control Pa nel 3-52 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 3 Touch the button for a set (Set 1 to Set 5), and then use the keypad to type in the add ress range. – The range setting cannot include “0. 0.0.0”. For example, to specify all addresses before 192.168.1 .20, specify the r[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-53 Specifying Settings Fro m the Cont rol Panel Chapter 3 RAW Port No. Specify the RAW port numbers used by the printer. By specifying multiple port numbers, multiple data ca n be accepted simultaneously. 1 In TCP/IP Setting screen 5/5, touch [RAW Port No.]. The RAW Port Numbe r screen [...]

3 Specifying S ettings From the Control Pa nel 3-54 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.13 NetWare Settings The settings for using the machi ne on a NetWare network can be specif ied. NetWare Parameters The NetWare settings are a s follows: NetWare Setting screen 1/5 NetWare Setting screen 2/5 NetWare Setting scr[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-55 Specifying Settings Fro m the Cont rol Panel Chapter 3 NetWare Se tting scre en 5/5 To specify NetWare settings 1 In the Administrator S etting screen, to uch [5 Network Setting]. (Refer to page 3-8 for more details.) 2 In the Net work Setting screen, touch [3 NetWare Setting]. NetWa[...]

3 Specifying S ettings From the Control Pa nel 3-56 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 5 Specify the desired settin gs. 6 Touch [Fwd. → ]. Pserver Setting sc reen 3/5 appears. 7 Specify the desired settin gs. 8 Touch [Fwd. → ]. Pserver Setting sc reen 4/5 appears. 9 Specify the desired settin gs. 10 Touch [Fwd[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-57 Specifying Settings Fro m the Cont rol Panel Chapter 3 11 Specify the desired settings. 12 Touch [OK]. The NetWare settings are appli ed. 2 Note To cance l changes to the setting, touch [C ancel]. To quit specifying the Utility mode se tting, touch [Exit] in th e sub display area or [...]

3 Specifying S ettings From the Control Pa nel 3-58 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 Status The NetWare status can be verified . 1 In NetWare Setting screen 2 /5, touch [Status]. The NetWare Statu s screen appear s. 2 Touch [ ] or [ ] to select the server to verify. 3 Verify the NetWare status. 4 Touch [Close].[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-59 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.14 http Server Settings You can specify the http server sett ings, PageScope Web Connection set- tings, and the IPP settings used by the printer of this machine. IPP and http Parameters The IPP parameters are as follows: http S[...]

3 Specifying S ettings From the Control Pa nel 3-60 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 To specify IPP and http sett ings 1 In the Administrator Setting screen, to uch [5 Netw ork Setting]. (Refer to page 3-8 for more details.) 2 In the Network Setting screen, touch [4 http Server Setting]. The http Server Setting [...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-61 Specifying Settings Fro m the Cont rol Panel Chapter 3 7 Specify ea ch item. 8 Touch [Fwd. → ]. http Server Setting screen 4/4 appears. 9 Specify the desired settings. 10 Touch [OK]. The IPP settings a re applied. 2 Note To cance l changes to the setting, touch [C ancel]. To quit s[...]

3 Specifying S ettings From the Control Pa nel 3-62 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 Support Operat ion Specify whether each function is supported in IPP communication. [OFF]: Responds as not supported. [ON]: Responds to communi cation. No response is returned for “Cancel Job”, “Open Job”, and “Open Jo[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-63 Specifying Settings Fro m the Cont rol Panel Chapter 3 Printer Information The printer information can be specified. 1 In the IPP Se tting screen, touch [Printer Information]. Printer Information screen 1/2 ap pears. 2 Touch [Printer Name]. The Printer Name screen appears. 3 Type in [...]

3 Specifying S ettings From the Control Pa nel 3-64 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 6 Type in the printer location (up to 127 charac ters). 7 Touch [OK]. – To cancel changes to the setting, touch [C ancel]. The printer location is set, the Pr inter Information screen appears again. 8 Touch [Fwd. → ]. Printe[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-65 Specifying Settings Fro m the Cont rol Panel Chapter 3 10 Type in the printer informati on (up to 127 characters). – To cancel change s to the setting, touch [Cancel]. 11 Touch [OK]. The printer information is set, the Printer Info rmation screen ap pears again. 12 In Printer Infor[...]

3 Specifying S ettings From the Control Pa nel 3-66 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.15 FTP Settings Settings for sending scan data to FTP servers can be specified. FTP Par amete rs The FTP parameters are as follows: FTP Setting screen 1/3 FTP Setting screen 2/3 FTP Setting screen 3/3 Item De script ion Proxy [...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-67 Specifying Settings Fro m the Cont rol Panel Chapter 3 To specify FTP settings 1 In the Administrator S etting screen, to uch [5 Network Setting]. (Refer to page 3-8 for more details.) 2 In the Net work Setting screen, touch [5 FTP Setti ng]. FTP Setting scree n 1/3 appears. 3 Specif[...]

3 Specifying S ettings From the Control Pa nel 3-68 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 7 Specify the desired settin gs. 8 Touch [OK]. The FTP settings are applied. 2 Note To cancel changes to the setting, touch [Can cel]. To quit specifying the Utility mode sett ing, touch [Exit] in the sub display area. Otherwise[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-69 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.16 SMB Set tings You can specify the settings for sharing printers and sending files over a net- work. SMB Parameters The SMB parameters are as follows: SMB Setting screen 1/4 WINS Setting screen 2/4 WINS Setting screen 3/4 Cli[...]

3 Specifying S ettings From the Control Pa nel 3-70 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 2 Note When performing SMB scans (host name setting) via a router, specif y the WINS settings according to th e SMB transmission settings. To specify SMB sett ings 1 In the Administrator Setting screen, to uch [5 Netw ork Settin[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-71 Specifying Settings Fro m the Cont rol Panel Chapter 3 7 Specify the desired settings. 8 Touch [Fwd. → ]. SMB Setting screen 4/4 appears. 9 Specify the desired settings. 10 Touch [OK]. The SMB settings are applied.[...]

3 Specifying S ettings From the Control Pa nel 3-72 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 2 Note To cancel changes to the setting, touch [Can cel]. To quit specifying the Utility mode sett ing, touch [Exit] in the sub display area or press the [Utility/Counter] key. Othe rwise, cance l the Utility mode by touching [C[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-73 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.17 AppleTalk Settings You can specify the settings for network printi ng using AppleTalk. AppleTalk Parameters The AppleTalk parameters are as follows: To specify AppleTalk settings 1 In the Administrator S etting screen, to uc[...]

3 Specifying S ettings From the Control Pa nel 3-74 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 4 Touch [OK]. The AppleTalk settings a re applied. 2 Note To cancel changes to the setting, touch [Can cel]. To quit specifying the Utility mode sett ing, touch [Exit] in the sub display area or press the [Utility/Counter] key. [...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-75 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.18 Enabling LDAP Sett ings The LDAP func tion to which t he machine can connect and search a nd re- trieve information ca n be enabled/disabled. Enabling LDAP Parameters The Enabling LDAP parameters are as follows: To specify E[...]

3 Specifying S ettings From the Control Pa nel 3-76 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 2 Note To cancel changes to the setting, touch [Can cel]. To quit specifying the Utility mode sett ing, touch [Exit] in the sub display area. Otherwise, cancel the Utility mode by touching [Close] in each screen until the screen[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-77 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.19 Setting Up LDAP Settings The LDAP server can be registered and authen tication settings ca n be spec- ified. LDAP Server Registration Parameters The LDAP server registration parameters are as follows: Setting Up LDAP screen [...]

3 Specifying S ettings From the Control Pa nel 3-78 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 Setting Up LDAP screen 3/6 Setting Up LDAP screen 4/6 Setting Up LDAP screen 5/6 Item De script ion Enable SSL Sets wh ether to use SSL (dat a encryptio n) when connecting to the LDAP server. Whe n SSL is used, the content that [...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-79 Specifying Settings Fro m the Cont rol Panel Chapter 3 Setting Up LDAP screen 6/6 Use referral Select whether to use the referral setting. When refer ral is used, the s earch base that was spec ified in LDAP Sever Setting se arches th e top and bo ttom levels as the st arting point. [...]

3 Specifying S ettings From the Control Pa nel 3-80 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 To specify Setting Up LDAP setti ngs 1 In the Administrator Setting screen, to uch [5 Netw ork Setting]. (Refer to page 3-8 for more details.) 2 In the Network Setting screen, touch [8 LDAP Setting]. 3 In the LDAP Setti ng scree[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-81 Specifying Settings Fro m the Cont rol Panel Chapter 3 7 Specify the desired settings. 8 Touch [Fwd. → ]. Setting Up LDAP screen 3/6 appears. 9 Specify the desired settings. 10 Touch [Fwd. → ]. Setting Up LDAP screen 4/6 appears. 11 Specify the desired settings. 12 Touch [Fwd. ?[...]

3 Specifying S ettings From the Control Pa nel 3-82 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 13 Specify the desired settin g. 14 Touch [Fwd. → ]. Setting Up LDAP screen 6/6 appears. 15 Specify the desired settin gs. 16 Touch [OK]. The LDAP server registration and a uthentication are set . 2 Note To cancel changes to t[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-83 Specifying Settings Fro m the Cont rol Panel Chapter 3 2 Note Be sure to use an authentication meth od like the one that is used by the LDAP server. For details, refer to th e manual of the LDAP server being used. If the auth entication meth od is specified as “GSS-SPNEGO”, enter[...]

3 Specifying S ettings From the Control Pa nel 3-84 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 Initial Setting for Search Detai ls The initial setting of the search condit ions wh en performing a deta iled search can be specified by “Nam e”, “E-Mail”, “Fax Number”, “Last Name”, “First Name”, “City”[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-85 Specifying Settings Fro m the Cont rol Panel Chapter 3 2 Note To cance l changes to the setting, touch [C ancel]. To quit specifying the Utility mode se tting, touch [Exit] in th e sub display area or press the [Utility/Counter] key. Otherwise, cancel the Utility mode by touching [Cl[...]

3 Specifying S ettings From the Control Pa nel 3-86 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.20 Search Default Setting You can specify the LDAP server that is to perform searches by priority from the registered LDAP servers. To specify the detect default server settings 1 In the Administrator Setting screen, touch [5 [...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-87 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.21 E-Mail TX (SMTP) Settings Information such as the SMTP serve r that is re quired to se nd the da ta as an e-mail attachme nt in Scan mode can be specified. Also, e-mail authe ntica- tion can be specified. ! Detail If running[...]

3 Specifying S ettings From the Control Pa nel 3-88 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 E-Mail TX (S MTP) screen 3/4 E-Mail TX (S MTP) screen 4/4 SMTP Detail screen To specify E-Mail TX (SMTP) settings 1 In the Administrator Setting screen, to uch [5 Netw ork Setting]. (Refer to page 3-8 for more details.) 2 In the[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-89 Specifying Settings Fro m the Cont rol Panel Chapter 3 3 In the E-Mail Setting screen, touch [1 E-Mail TX (SMTP)]. E-Mail TX (SMTP) screen 1/4 appears. 4 Specify the desired settings. 5 Touch [Fwd. → ]. E-Mail TX (SMTP) screen 2/4 appears. 6 Specify the desired settings. 7 Touch [F[...]

3 Specifying S ettings From the Control Pa nel 3-90 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 9 Touch [Fwd. → ]. E-Mail TX (SMTP) screen 4/4 appears. 10 Specify the desired settin gs. 11 Touch [OK]. The SMTP server information is set. 2 Note To cancel changes to the setting, touch [Can cel]. To quit specifying the Util[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-91 Specifying Settings Fro m the Cont rol Panel Chapter 3 SMTP Server Address The SMTP server add ress used to send e-mail can be specified. 1 In the E-Mail TX (SMTP) scre en 2/4, touch [Host Address]. The Host Address screen appears. 2 Touch [IP Address Input] or [Host Name Input]. –[...]

3 Specifying S ettings From the Control Pa nel 3-92 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 2 Note To cancel changes to the setting, touch [Can cel]. If the host address exceeds 81 characte rs, touch [Details] to display the Host Address Detail screen with the rest of the host addresses. If the DNS setting i s not spec[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-93 Specifying Settings Fro m the Cont rol Panel Chapter 3 SMTP Authentication Specify w hen the auth entication meth od is set to SMTP authentication. 1 In the SMTP Detail screen under SMTP Authentication, touch [ON]. The SMTP Authen tication screen a ppears. 2 In the SMTP Authenticatio[...]

3 Specifying S ettings From the Control Pa nel 3-94 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 6 Type in the password (up to 15 characters). 7 Touch [OK]. – To cancel changes to the setting, touch [C ancel]. The password is set, and the SMTP Au thentication scre en appears again. 8 In the SMTP Authentic ation screen, to[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-95 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.22 E-Mail R X (POP) Settings You can specify the setti ngs to perform the authen tication of the e-mail sender with POP Before SMTP. E-Mail RX (POP) Parameters The E-Mail RX (POP) parameters are as follows: E-Mail RX (POP) scre[...]

3 Specifying S ettings From the Control Pa nel 3-96 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 To specify E-Mail RX (POP) settings 1 In the Administrator Setting screen, to uch [5 Netw ork Setting]. (Refer to page 3-8 for more details.) 2 In the Network Setting screen, touch [9 E-Mai l Setting]. 3 In the E-Mail Setting sc[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-97 Specifying Settings Fro m the Cont rol Panel Chapter 3 9 Specify the desired settings. 10 Touch [OK]. The POP server information is set.[...]

3 Specifying S ettings From the Control Pa nel 3-98 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 POP Server Address The POP server address that is used to receive e-mail can be specified. 1 In the E-Mail RX (POP) sc reen, touch [Host Address]. The Host Address screen app ears. 2 Touch [IP Address Input] or [Host Name Input][...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-99 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.23 Device Settings Device informati on can be set. Device Parameters The device paramete rs are as follows: 2 Reminder When turning the main power switch OFF then ON, wait for 10 seconds or longer before t urning it ON aga in; [...]

3 Specifying S ettings From the Control Pa nel 3-100 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 5 Touch [OK]. The device information is set. 2 Note To cancel changes to the setting, touch [Can cel]. To quit specifying the Utility mode sett ing, touch [Exit] in the sub display area or press the [Utility/Counter] key. Othe [...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-101 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.24 Time Adjustment Settings The machine’s internal clock can be c orrected via the network. Time Adjus tment Parameters The time adjustment para meters are as follows: After specifying this setti ng, touch [1 System Setting][...]

3 Specifying S ettings From the Control Pa nel 3-102 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 2 Note To cancel changes to the setting, touch [Can cel]. To quit specifying the Utility mode sett ing, touch [Exit] in the sub display area or press the [Utility/Counter] key. Othe rwise, cance l the Utility mode by touching [[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-103 Specifying Settings Fro m the Cont rol Panel Chapter 3 2 Note To cance l changes to the setting, touch [C ancel]. ! Detail For the procedur e to enter characters using the keyboa rd that appears on the screen, refer to “E ntering text” on page 6-5.[...]

3 Specifying S ettings From the Control Pa nel 3-104 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.25 Status Notificat ion Settings Settings for notifying the administrator of the machine’ s status by e-mail can be specified. The stat us notification is sent if the e-mail address is entered and if any of the notific atio[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-105 Specifying Settings Fro m the Cont rol Panel Chapter 3 4 Specify the desired settings. Notification Item Setting The conditions under which notific ation of the machine’s status is to be sent by e-mail can be speci fied. 1 In the Status Notification Setting sc reen, touch [2 Notif[...]

3 Specifying S ettings From the Control Pa nel 3-106 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.26 Total Counter Report Setting You can specify the total counter notifi cation schedule and notification des- tination. The settings that can be specifi ed in the total counter scre en are described below. To specify the tot[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-107 Specifying Settings Fro m the Cont rol Panel Chapter 3 2 Note To display the Adminis trator Setting sc reen, refer to “To display the Ad- ministrator Setting screen” on page 3-8. 2 Note To quit specifying the Utility mode se tting, touch [Exit] in th e sub display area or press [...]

3 Specifying S ettings From the Control Pa nel 3-108 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 When “Weekly” is specified as the notif ication period When “Monthly” is specified as the notification period Item De script ion Interval of Week (s) Enter the interval of week s for sending the sche dule. To change th [...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-109 Specifying Settings Fro m the Cont rol Panel Chapter 3 To specify the notifi cation address settings 1 In the Total Counter Report Se tt ing screen, touch [Schedule1]. The Schedule1 settin g screen appears. 2 Specify the notificati on period. 3 Touch [OK]. The Total Counter Report S[...]

3 Specifying S ettings From the Control Pa nel 3-110 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 5 Select whether you want to use this schedule to send to this address. 6 Touch [OK], and then touch [OK] in the next screen that appears. The Total Counter Report Se tting screen appears again. 2 Note To cancel changes to the [...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-111 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.27 PING Confirmation Settings for checking the TCP/IP network using PING can be specifi ed. PING Confirmation Parameters The PING Confirmation pa rameters are as follows: To specify PING co nfirmation settings 1 In the Adminis[...]

3 Specifying S ettings From the Control Pa nel 3-112 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 5 Touch [Close]. 2 Note To quit specifying the Utility mode sett ing, touch [Exit] in the sub display area. Otherwise, cancel the Utility mode by touching [Close] in each screen until the screen f or the Copy , Fax, Scan or B o[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-113 Specifying Settings Fro m the Cont rol Panel Chapter 3 PING TX Addres s The host address of the device to ping can be specified. 1 In the PING Con firmation sc reen, touch [Host Address]. The Host Address screen appears. 2 Touch [IP Address Input] or [Host Name Input]. – To specif[...]

3 Specifying S ettings From the Control Pa nel 3-114 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 2 Note To cancel changes to the setting, touch [Can cel]. ! Detail For the procedure to enter characters usin g the keyboar d that appear s on the screen, refer to “E ntering text” on page 6-5.[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-115 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.28 SLP Settings The use of SLP can be enabled or disabled. If se t to “Enable”, devices can be searched using TWAIN. If set to “D isable”, device cannot be searched. To specify SLP settings 1 In the Administrator S ett[...]

3 Specifying S ettings From the Control Pa nel 3-116 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.29 LPD Settings The use of LPD when printing can be enabled or disabled. To specify LPD settings 1 In the Administrator Setting screen, to uch [5 Netw ork Setting]. (Refer to page 3-8 for more details.) 2 In the Network Setti[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-117 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.30 Prefix/Suffix Settings The registered characters can be added to the e-mail address that is speci- fied when se nding e-mail. This elimin ates having to enter chara cters that are often entered such as the same domain name.[...]

3 Specifying S ettings From the Control Pa nel 3-118 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 4 Specify the desired settin gs. The prefix/suffix is set. If [ON] is selected, cont inue with t he registration of prefixes/suffixes. 2 Note To quit specifying the Utility mode sett ing, touch [Exit] in the sub display area or[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-119 Specifying Settings Fro m the Cont rol Panel Chapter 3 Prefix/Suffix Setting The character strin gs that are used by th e prefix/suffix inpu t function can be registered. 1 In the Prefix/Suffi x Setting screen, touch [2 Prefix/Suffix Se tting]. The Prefix/Suffi x Setting screen appe[...]

3 Specifying S ettings From the Control Pa nel 3-120 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 4 Touch [OK]. – To cancel changes to the setting, touch [C ancel]. The prefix is set. 5 Touch [Suffix]. The Suffix screen appears. 6 Enter the character string that is to be used as a suff ix (up to 64 char- acters). – For [...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-121 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.31 Action for In valid Certificate When this machine is to be connected t o an SSL serve r as a cl ient, you can specify the operation meth od when the validation of the SSL server certifi- cate has expired. 2 Note The functio[...]

3 Specifying S ettings From the Control Pa nel 3-122 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 2 Note To display the Administrator Setting sc reen, refer to “To display the Ad- ministrator Setting screen” on page 3-8. 2 Note To cancel changes to the setting, touch [Can cel]. To quit specifying the Utility mode sett i[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-123 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.32 SNMP Set tings SNMP settings can be specified. SNMP Parameters The SNMP parameters are as follows: The v1/v2c settings that ca n be specified are described below. Item Description SNMP Sett ing Specify whet her to use SN MP[...]

3 Specifying S ettings From the Control Pa nel 3-124 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 To specify SNMP settings 1 In the Administrator Setting screen, to uch [5 Netw ork Setting]. (Refer to page 3-8 for more details.) 2 In the Network Setting screen, touch [Fwd.->], then [1 SNMP Setting]. 3 Specify the desired[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-125 Specifying Settings Fro m the Cont rol Panel Chapter 3 v1/v2c Setting 1 In the Net work Setting scre en, touch [v1/v2c Setting]. 2 Specify the settings for v1/v2c. 3 Touch [OK]. The SNMP Settin g screen appears aga in.[...]

3 Specifying S ettings From the Control Pa nel 3-126 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 v3 Setting The settings that can be sp ecified are described below. SNMP v3 Setting screen 1/3 SNMP v3 Read Setting screen 2/3 SNMP v3 Write Setting screen 3/3 Item De script ion Context Name Specify th e context name. Use the [...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-127 Specifying Settings Fro m the Cont rol Panel Chapter 3 To specify the v3 settings 1 In the Net work Setting screen, touch [v3 Setti ng]. SNMP v3 Setting screen 1/3 appears. 2 Specify the desired settings. 3 Touch [Fwd. → ]. SNMP v3 Setting screen 2/3 appears. 4 Specify the desired[...]

3 Specifying S ettings From the Control Pa nel 3-128 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 6 Specify the desired settin gs. 7 Touch [OK]. The SNMP Setti ng screen appears aga in. 2 Note To cancel changes to the setting, touch [Can cel]. To quit specifying the Utility mode sett ing, touch [Exit] in the sub display are[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-129 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.33 Bonjour Setting You can specify the Bon jour setting. Bonjour Setting scree n To specify the Bonjour settings 1 In the Administrator Setting sc reen, touch [5 Network Setting]. 2 In the Net work Setting screen, touch [Fwd. [...]

3 Specifying S ettings From the Control Pa nel 3-130 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 2 Note To display the Administrator Setting sc reen, refer to “To display the Ad- ministrator Setting screen” on page 3-8. 2 Note To cancel changes to the setting, touch [Can cel]. To quit specifying the Utility mode sett i[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-131 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.34 TCP Socket Setting You can specify the TCP sock et settings. The TCP socket is used for the computer programs and the data tr ansmission of this machine. The settings that can be sp ecified are described below. TCP Socket S[...]

3 Specifying S ettings From the Control Pa nel 3-132 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 4 Touch [Fwd. → ]. TCP Socket Setting screen 2/2 appears. 5 Specify the desired settin gs. 6 Touch [OK]. 2 Note To display the Administrator Setting sc reen, refer to “To display the Ad- ministrator Setting screen” on pag[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-133 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.35 OpenAPI Settings Specify whethe r or not therface is open to soft ware with a fu nction for com- municating with t he copier. The settings for “Access Setting”, “Port No.”, “SSL”, and “Auth entication” of Op[...]

3 Specifying S ettings From the Control Pa nel 3-134 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 Port No. Specify the port number that other systems access using OpenAPI (initial port number: 50001, init ial port number (SSL): 50003). 1 In the Administrator Setting screen , touch [9 System Connecti on]. (Re- fer to page 3-[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-135 Specifying Settings Fro m the Cont rol Panel Chapter 3 SSL Specify whether to encrypt with SSL access from other systems that use OpenAPI. (D efault setting: O FF) 1 In the Administrator Setting screen , touch [9 Syste m Connection]. (Re- fer to page 3-8 for more details.) 2 In the [...]

3 Specifying S ettings From the Control Pa nel 3-136 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 Authentication Specify whether to use au thentication for access from other systems that use OpenAPI. (Defaul t setting: OFF) 1 In the Administrator Setting screen , touch [9 System Connecti on]. (Re- fer to page 3-8 for more d[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-137 Specifying Settings Fro m the Cont rol Panel Chapter 3 8 Enter the password (up to 8 char acters), and then touch [OK]. The user password is set. 9 Touch [OK]. The authentic ation function whe n OpenAPI is used i s set. 2 Note To cance l changes to the setting, touch [C ancel]. ! De[...]

3 Specifying S ettings From the Control Pa nel 3-138 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.36 External Server Authentication If performing user authentication using an external server, multiple settings are required depending on the type of server bei ng used. Specify the settings by using the following procedure a[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-139 Specifying Settings Fro m the Cont rol Panel Chapter 3 ! Detail When “Active Direct ory” is selected under “Externa l Server Authentica- tion”, specify a password with one char acter or more. If a password is not specified, authenticati on will fail . Do not use “ ” ”a[...]

3 Specifying S ettings From the Control Pa nel 3-140 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 3 In TCP/IP Setting screen 3/5 from the Net work Setting scre en, specify the following settings. Specify the DNS server that is connected to “Ac- tive Directory”. – Priority DNS Server – Substitute 1 DNS Server – Sub[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-141 Specifying Settings Fro m the Cont rol Panel Chapter 3 6 In [Administrator Setting] — [User Authentication/Account Track] — [Authenticati on Method], specify the following settings. – Specify “On (Ex ternal Server)” in Us er Authentication . – Specify “Active Directory[...]

3 Specifying S ettings From the Control Pa nel 3-142 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 7 In [Administrator Setting] — [1 System Setting] — [3 Date/Time Set- ting], specify the followin g settings. – Specify the current time and time zone. 2 Note To display the Administrator Setting sc reen, refer to “To d[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-143 Specifying Settings Fro m the Cont rol Panel Chapter 3 Using Novell NDS Before specifying the settings, prepare the information described below. The settings can be specifi ed with Nove ll NDS Netware Server 4.0 or lat er. Administrator password (required) Default NDS tree name (req[...]

3 Specifying S ettings From the Control Pa nel 3-144 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 – Specify “NDS” in External Server Type. – Enter the NDS server tree name and contex t name. 2 Note To display the Administrator Setting sc reen, refer to “To display the Ad- ministrator Setting screen” on page 3-8.[...]

Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-145 Specifying Settings Fro m the Cont rol Panel Chapter 3 Using NTLM v1/NTLM v2 Before specifying the se ttings, prepare the info rmation described below. Administrator password (required) Defaul t domain name (req uired) List of the users f or authentication (required) ! Detail Do not[...]

3 Specifying S ettings From the Control Pa nel 3-146 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 – Specify “NTLM v1” or “NTLM v2 ” in External Server Type. – Enter the default domain name. 2 Note To display the Administrator Setting sc reen, refer to “To display the Ad- ministrator Setting screen” on page 3[...]

4 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Specifying Settings Using PageScope Web Connection[...]

4 Specifying Settings Using PageScope Web Connection 4-2 bizhub 75 0/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4 Specifying Settings Using PageScope Web Connection 4.1 Items That Can Be Spec ified Using PageScope Web Connection PageScope Web Connection is a device management utility supported by the HTTP server built into t[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-3 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Administ rator Mode The following more advanced settings can be specified by the administrator. Item Descri ption System ta b User Authenti cation — User Regist ration Adds and registers new users. User Au thenti [...]

4 Specifying Settings Using PageScope Web Connection 4-4 bizhub 75 0/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Network tab TCP/IP Setting Sp ecifies TCP/IP settings. IP Filtering Sets the IP address filter funct ion. NetWare Setting Specifies NetWare settings. NetWare Status Used to check the NetWa re status. IPP Setting Sp[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-5 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.2 Using PageScope Web Connection Operating Environment 2 Reminder Flash Player 8 or later is not supp orted by Windows NT 4.0 or Mac O S 8/ 9. If your computer is running one of these operating systems, download F[...]

4 Specifying Settings Using PageScope Web Connection 4-6 bizhub 75 0/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 ! Detail Below is the URL after SSL/TLS is enabled. https://<IP_add ress_of_the_machine>/Re directed to “https://” even if “http://” is entered. 2 Note If user authen tication i s enabled, a page for [...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-7 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Page Structure The page that appears immediately aft er PageScope Web Connection is ac- cessed is called the User mode page. The configuration of the PageScope Web C onnection page is shown below. 1 2 3 11 56 10 8 1[...]

4 Specifying Settings Using PageScope Web Connection 4-8 bizhub 75 0/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 ! Detail For each login method, refer to “Logging On and Logging Off” on page 4-10. 10 Tabs Sele ct the category of the page to be displayed. The fol - lowing tabs are displayed in User mode. • System •J o [...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-9 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Web Browser Cache The newest information ma y not appear in the Pa geScope Web Connection pages because older versions of page s are saved in the cache for the Web browser. In addition, the following pr oblems may o[...]

4 Specifying Settings Using PageScope Web Connection 4-10 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.3 Logging On and Logging Off When PageScope Web Connec tion is accessed, the page for a public user appears. In order to log on as a register ed user or an administrator when user authentication is performed, it [...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-11 Specifying Setting s Using PageScope Web Conne ction Chapter 4 The user is logged off, an d the Login page appears. Logging O n to User Mode (Pub lic User) There are two procedures for logging on to User mode: one for a registered user and one for a public user. If user authen[...]

4 Specifying Settings Using PageScope Web Connection 4-12 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 2 Click [Login]. The User mode page appears. 2 Note If “Flash” is selected as the display format, the followin g will appear using the Flash fe ature. Flas h Player is required to u se the Flash feature. Status[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-13 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Logging O n to User Mode (Reg istered User/B ox Administrator) There are two procedures for logging on to User mode: one for a registered user and one for a public user. The following procedure describes how to per[...]

4 Specifying Settings Using PageScope Web Connection 4-14 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 2 Click [Login]. The User mode page appears. 2 Note If “Prohibit Functions when Auth. Erro r” in Administrator mode is set to “Mode 2” and a user enters an incorrect password the specif ied number of times,[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-15 Specifying Setting s Using PageScope Web Conne ction Chapter 4 2 Note When logged on to Administrator mode , the control panel of this machine is locked and c annot be used. Depending on the status of the mach ine, you may not be able to log on to Administrator mode. To log on[...]

4 Specifying Settings Using PageScope Web Connection 4-16 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 The Administrator mode page appears. 2 Reminder If “Prohibit Functions when Auth. Erro r” in Administrator mode is set to “Mode 2” and an incorrect admini st rator password is entered the speci- fied number[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-17 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.4 User Authentication (User Mode) Changing the User Password The setting can be specified when logge d in with user authentication. The password of the currently logged in user can b e changed. The settings that [...]

4 Specifying Settings Using PageScope Web Connection 4-18 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Checking the User Regi stration Information The user information can be viewed when logged in with user authentication. The information of th e currently logged in user can be checked. 1 On the System tab, click [U[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-19 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.5 Account Track (User Mode) You can che ck the accou nt information when performing a ccount track au- thentication. The information of the currently logged in account can be checked. To check the account track i[...]

4 Specifying Settings Using PageScope Web Connection 4-20 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.6 Address Boo k Registering New Destinations New destinations can be registered for the scanning func tions. The Scan tab appears only when re gistrations by users are permitted. Registering New Address Books Cli[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-21 Specifying Setting s Using PageScope Web Conne ction Chapter 4 When “SMB” is selected When “User Box” is selected ! Detail User boxes can be used only if the op tional hard disk drive is installed. Item Description Name Enter the name of the destination (up to 24 chara[...]

4 Specifying Settings Using PageScope Web Connection 4-22 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 A setting edit page appears an d the settings can be chan ged. The items are the same as those used in registration.[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-23 Specifying Setting s Using PageScope Web Conne ction Chapter 4 To register new destinations 1 Click [New Registration]. A page for selecting the tr ansmission mode appears. 2 Select the transmission mode and click [Nex t]. The registration page appears. 3 Enter t he sett ings,[...]

4 Specifying Settings Using PageScope Web Connection 4-24 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Editing abbr eviated des tinations Click of the address you want to change. Deleting the Address Book 1 Click of the address you want to delete. A confirmation page appears. 2 To delete, click the [OK] bu tton.[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-25 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.7 Group Destination Click the Scan tab, an d then click “Grou p”. Multiple destinations registered in th e abbreviated destination list ca n be registered as a group. To register gr oup destinations 1 Click [[...]

4 Specifying Settings Using PageScope Web Connection 4-26 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 3 Enter the Name. 4 For each tr ansmission mode, sele ct the destinations. – Click . – Select the desired desti nations to be registered to the group from the Abbreviated Destination List, and click [Apply].[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-27 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.8 Program Registration Click the Scan tab, and then click “Program”. The information to be entered is as follows: When “E -mail: Scan” is selecte d Item Description No. E nter the reg istrati on number. N[...]

4 Specifying Settings Using PageScope Web Connection 4-28 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 When “FTP: Scan” is selected Neg-/Positive Rev erse Select whet her or not the black and whit e areas of the docume nt are reversed in the scan. Non-Image Area Erase Select whether or not the shadows alon g the[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-29 Specifying Setting s Using PageScope Web Conne ction Chapter 4 When “SMB: Scan” is selecte d Booklet Pagination Select wh ether or not to enable pa ge scanning. If “ON” is selecte d, the binding position is specified. Erase Specify the width of the perimeter of th e do[...]

4 Specifying Settings Using PageScope Web Connection 4-30 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 File Name Enter the file na me (up to 30 ch aracters). Original Direction Sel ect the orientation of the original do cument. Bind Select t he original binding po sition. Special O riginal Selec t whether the docume[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-31 Specifying Setting s Using PageScope Web Conne ction Chapter 4 When “User Box: Scan” is sele cted Item Description No. Enter the registrati on number. Name Enter the re gistration name (up t o 24 charac ters). Select from Address Book Enter the destination e-mail address d[...]

4 Specifying Settings Using PageScope Web Connection 4-32 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 When “Group: Scan” is selected Neg-/Positive Rev erse Select whether or not the black and w hite areas of the document ar e reversed in the scan. Non-Image Area Eras e Select whet her or not t he shadows along [...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-33 Specifying Setting s Using PageScope Web Conne ction Chapter 4 When “No Destination (Store Scanner)” is selected Booklet Pagina tion Select whether or not to ena ble page scanning. If “ON” is selected, the binding position is specified. Erase Specify the wi dth of the [...]

4 Specifying Settings Using PageScope Web Connection 4-34 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Multiple destinations registered in th e abbreviated destination list can be registered as a program. Book Scanning Select whether or not to enable book sc anning. If “ON” is selected, th e scanning method a nd[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-35 Specifying Setting s Using PageScope Web Conne ction Chapter 4 To register new destinations 1 Click [New Registration]. A page for selecting the tr ansmission mode appears. 2 Select the transmission mode and click [Nex t]. The registration page appears.[...]

4 Specifying Settings Using PageScope Web Connection 4-36 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 3 Enter the settings, and click [Apply].[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-37 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.9 Temporary One-Tou ch Registration Click the Scan tab, and then click “Temporary One-Touch”. Temporary destinations can be registered. To regist er tempor ary destinat ions 1 Click [New Registration]. A page[...]

4 Specifying Settings Using PageScope Web Connection 4-38 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 3 Enter the settings, and click [Apply]. The details of the settings are the sa me as those for program registra- tions. For details, see “Program Registration” on page 4-27. 2 Note To specifying a registered t[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-39 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.10 Subject Registration Click the Scan tab, and then click “Subject”. Up to 10 subjects that can be used wh en sending e-mail can be registered.[...]

4 Specifying Settings Using PageScope Web Connection 4-40 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 To register the subject When sending e-mail wi th a fixed subject 0 Click “E-Mail Default” to select it. 1 Click beside the subject to be registered or edited. The registration page appears. 2 Enter the subject[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-41 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.11 Text Registration Click the Scan tab, an d then click “Text”. Up to 10 text messages that can be used when sending e-mail can be reg- istered.[...]

4 Specifying Settings Using PageScope Web Connection 4-42 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 To regi ster text When sending e -mail with a fixed text messa ge 0 Click “E-Mail Default” to select it. 1 Click beside the text to be registered or edited. The registration page appears. 2 Enter the text, an d[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-43 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.12 Administrator Mode In Administrator mode, you can perfo rm system configuration of the ma- chine. Six tabs (System, Job, Box, Print, Scan and Net work) are available. For the procedure to log on to Adm inistra[...]

4 Specifying Settings Using PageScope Web Connection 4-44 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.13 Time Adjustment Setting Select whether the date an d time of the machine can be adjusted through ac - quisition from the NTP server. To adjust the time 1 On the System tab, click [Date/Time]. 2 Click [Time Adj[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-45 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.14 User Authentication (Administrator Mode) User Registrat ion You can specify the setting w hen performing u ser authentic ation. Register the users tha t can log in. The settings that can be sp ecified are desc[...]

4 Specifying Settings Using PageScope Web Connection 4-46 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 To register a user 1 On the System tab, click [User Authenticati on]. 2 Click the [New Regist ration] button.[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-47 Specifying Setting s Using PageScope Web Conne ction Chapter 4 3 Specify the required settings. 4 Click the [Apply] button. 5 Click the [OK] button.[...]

4 Specifying Settings Using PageScope Web Connection 4-48 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Checking or Changing the Re gistered User Information You can check or change the registered user inf ormation. The following set- tings can be specified. Item Description No. Displays the user registra tion number[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-49 Specifying Setting s Using PageScope Web Conne ction Chapter 4 To check or change the regi stered user information 1 On the System tab, click [User Authentication ]. 2 Click in the user list for the user you want to check.[...]

4 Specifying Settings Using PageScope Web Connection 4-50 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 3 Check the regist ration informati on and change i t as necessary. 4 Click the [Apply] button.[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-51 Specifying Setting s Using PageScope Web Conne ction Chapter 4 To delete a registered user 1 On the System tab, click [User Authentication ]. 2 Click in the user list for the user you want to delete. 3 Check the message, and then click the [OK] button.[...]

4 Specifying Settings Using PageScope Web Connection 4-52 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Default Function Permission You can specify the permissions for the op erating functions for a ll registered users. The settings that can be sp ecified are described below. To specify the default function permissio[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-53 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.15 Account Track Registration (Administrator Mode) Account Track Registration You can specify the setti ngs when performing account track authentication . Register the accou nt that can log in. The settings that [...]

4 Specifying Settings Using PageScope Web Connection 4-54 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 To register an account 1 On the System tab, click [A ccount Track Registration]. 2 Click the [New Regist ration] button. 3 Specify the desired settin gs.[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-55 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4 Click the [Apply] button. 5 Click the [OK] button.[...]

4 Specifying Settings Using PageScope Web Connection 4-56 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Checking or Changing the Regi stered Account Information The settings that can be chec ke d or changed are described below. To check or change the regi stered account information 1 On the System tab, click [User Au[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-57 Specifying Setting s Using PageScope Web Conne ction Chapter 4 3 Check the registra tion information and chan ge it as necessary. 4 Click the [Apply] button.[...]

4 Specifying Settings Using PageScope Web Connection 4-58 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 To delete registered accounts 1 On the System tab, click [User Authenticati on]. 2 Click in the account list for th e account you want to delete. 3 Check the message, and then click the [OK] button.[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-59 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.16 Administrator Password The administrator password can be changed. ! Detail If the enhanced security mode wa s enabled, [Administrator Password] does not appear in the menu. To change the administrator password[...]

4 Specifying Settings Using PageScope Web Connection 4-60 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.17 Prefix/Suffix The prefix and suf fix that are provided as destination inf ormation when send- ing e-mail can be registered. If address book regis tration by users is disa- bled, the address book regi str ation[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-61 Specifying Setting s Using PageScope Web Conne ction Chapter 4[...]

4 Specifying Settings Using PageScope Web Connection 4-62 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.18 Import/Export Used to import address book data fr om the computer or export the ma- chine’s address book. Importing % Click [Browse...], select the address book data to be imported, and click [Import]. Expor[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-63 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.19 Other Specify address book r estrictions. Item Description Prohibit User Operation Specify whether to permit destin ation registrat ion by users.[...]

4 Specifying Settings Using PageScope Web Connection 4-64 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.20 TCP/IP 2 Reminder To activate all network se tting ch anges, turn the main power off and then back on. When turning the main power switch OFF then ON, wait for 10 seconds or longer before t urning it ON aga in[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-65 Specifying Setting s Using PageScope Web Conne ction Chapter 4 TCP/IP Specify TCP/IP settings.[...]

4 Specifying Settings Using PageScope Web Connection 4-66 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Item Description TCP/IP Enables/disables TCP/IP. Network S peed Specify the transmission spe ed. IP Address Setting Method Select the IP addre ss setting method. IP Address Specify the machine’s IP address (synta[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-67 Specifying Setting s Using PageScope Web Conne ction Chapter 4 IP Address Filtering Specify the IP address filter function. Access restrictions can be applied by specifying the host IP address. Item Description Permit Access Ena bles/disables the acc ess permission address set[...]

4 Specifying Settings Using PageScope Web Connection 4-68 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.21 NetWare Specify NetWare settings. Item Description IPX Setting Spec ify whether to enable the I PX setting. Ethernet Frame Type Select the fr ame type. NetWare Print Mode Specify th e print server operation mo[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-69 Specifying Setting s Using PageScope Web Conne ction Chapter 4 NetWare Status The NetWare server and que ue names can be displayed to show the Net- Ware connection stat us. NDS Context Name Enter the NDS context name ( up to 191 characters ex cluding / : ; , * [ ] < > [...]

4 Specifying Settings Using PageScope Web Connection 4-70 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.22 IPP Specify the IPP print settings.[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-71 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Item Description IPP Setting Specify whether to enable the IPP print func tion. Printer Name Enter the prin ter name (up t o 127 alpha numeric ch aracters, hyphen, and underscore). Printer Location En ter the print[...]

4 Specifying Settings Using PageScope Web Connection 4-72 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.23 FTP FTP TX Specify client settings such as the FTP proxy server. Item Description FTP TX Specify whethe r to use this machine as an FTP server. Proxy Server Address Enter the proxy serv er address (syntax: “[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-73 Specifying Setting s Using PageScope Web Conne ction Chapter 4 FTP Server Specify FTP server settings. Item Description FTP Server Specify the FTP server sett ing to “ON” or “OFF”.[...]

4 Specifying Settings Using PageScope Web Connection 4-74 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.24 SNMP Specify SNMP settings. Item Description SNMP Specify whether to use SNMP. Also, se lect the SNMP type to be used from the list of items. SNMPv1/v2c (IP) SNMPv3 (IP) SNMPv1 (IPX) UDP Port Setting Enter the[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-75 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.25 SMB WINS Setting You can specify SMB WINS settings. 2 Note When performing SMB scans (host name setting) via a router, specify the WINS settings according to the SMB tr ansmission settings in [SMB Set- ting] -[...]

4 Specifying Settings Using PageScope Web Connection 4-76 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Client Setting Specify SMB scan settings. 2 Note To use the SMB (NTLM ) of the externa l server authenticat ion, [Scan Set- ting] or [Print Sett ing] must be turned ON. 2 Note NTLMv2 is available from Windows NT 4.[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-77 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Print Setting Specify SMB print settings. Item Description SMB Print Specify wheth er to use th e SM B printing (Windo ws printing) service. NetBIOS Name Enter the NetBIOS name (up to 15 characters). Print Service [...]

4 Specifying Settings Using PageScope Web Connection 4-78 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.26 AppleTalk Specify AppleTal k settings. Item Description AppleTalk Specify whether to use AppleTalk. Printer Nam e Enter th e print name (u p to 31 character s excluding = ~). Zone Name Enter the zone name (up [...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-79 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.27 Bonjour Setting You can specify th e Bonjour settings. Item Description Bonjour Specify whether to use the Bonjour setting . Bonjour Name Specify the device name that is used wit h Bonjour (up to 63 characters[...]

4 Specifying Settings Using PageScope Web Connection 4-80 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.28 LDAP Setting LDAP Setting Specify whether to use the LDAP setting.[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-81 Specifying Setting s Using PageScope Web Conne ction Chapter 4 LDAP Server Registration 1 On the Ne twork ta b, click [LDA P Setti ng]. 2 Click [LDAP Server Registration]. 3 Click of the server to be registered. – You can specify 5 LDAP servers.[...]

4 Specifying Settings Using PageScope Web Connection 4-82 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4 Specify the desired settin gs. ! Detail The setting that must be specified va ry depending on the authentication method. If “anonymous” is selected, settings for “Domain Name”, “Login Name”, and “Pa[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-83 Specifying Setting s Using PageScope Web Conne ction Chapter 4 2 Note Be sure to use an authentication meth od like the one that is used by the LDAP server. For details, refer to th e manual of the LDAP server being used. If the auth entication meth od is specified as “GSS-S[...]

4 Specifying Settings Using PageScope Web Connection 4-84 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.29 E-Mail Setting E-Mail RX ( POP) You can specify the settings to perf orm the authentication of the e-mail sender with POP Before SMTP. Item Description E-Mail RX Setting Specify whether to use the e-m ail rece[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-85 Specifying Setting s Using PageScope Web Conne ction Chapter 4 2 Note If selecting [Please check to ente r host name.], check that the D NS set- tings are specified correctly before maki ng the selection. For de tails, refer to “TCP/IP” on page 4-64. Auto Receiv e Check A [...]

4 Specifying Settings Using PageScope Web Connection 4-86 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 E-Mail TX (SMTP) Specify e-mail send settings. Item Description E-Mail TX Setting Specify whether to use the e- mail transmission setting. Scan to E-Mail Specify whether to use Scan to E-Mail. E-Mail Notificat ion [...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-87 Specifying Setting s Using PageScope Web Conne ction Chapter 4 ! Detail If running an antivirus progra m on th e e-mail server, the binary div ision function may not be able to be used. For det ails, ask the network admin- istrator. To receive binary e-mails, an e-mail client [...]

4 Specifying Settings Using PageScope Web Connection 4-88 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 ! Detail To perform user authentication with POP Before SMTP, the setti ngs that will allow POP to access the e-mail server must be specifie d. For details, refer to “E-Mail RX (POP)” on page 4-84.[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-89 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.30 SSL/TLS Specify SSL/TLS settings . When SSL/TLS is enabled, the commun ication between the mac hine and the client co mputer is encrypted to pr event infor- mation leakage such a s passwords and transmitted da[...]

4 Specifying Settings Using PageScope Web Connection 4-90 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 If you create a sel f-signed certificat e or obtain and instal l a certificat e from a Certificate Authority, SSL/TLS is enabled. Click [Setting] to change certificate inform ation, delete certificates, or create n[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-91 Specifying Setting s Using PageScope Web Conne ction Chapter 4 SSL/TLS Setting If “Create a self-signed Ce rtificat e” is select ed, settings f or the foll owing need to be entered. To create your own certificat e, select “Create a self-signe d Certificate”. If “Requ[...]

4 Specifying Settings Using PageScope Web Connection 4-92 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 To create a certificate 1 Click [Setting]. A page for selecting the function appears. 2 Select “Create a sel f-signed Certifi cate” or “Request a Certif icate”, and then click [Next]. The registration page [...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-93 Specifying Setting s Using PageScope Web Conne ction Chapter 4 3 Specify the desired settings. Example for Create a Self- signed a Certificat e 4 Click [Apply] or [Next]. A certificate can be regis tered or obtained. – If a request was made for a ce rtificate, proceed to ste[...]

4 Specifying Settings Using PageScope Web Connection 4-94 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 SSL/TLS Setting — Install a Certificate Install the certif icate issued by the Certificat e Authority. 1 Click [Setting]. A page for selecting the function appears. 2 Select “Install a Certific ate”, and then[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-95 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Set an Encryption Strength 1 In the SSL/TLS page, select “Set an En cryption Strength”, and then click the [Next] button. 2 Select the encrypt ion strength, and then clic k the [Apply] button.[...]

4 Specifying Settings Using PageScope Web Connection 4-96 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Remove a Certificate 1 In the SSL/TLS page, select “Re move a Certificate”, and then clic k the [Next] b utton. 2 Check the message, and then click the [OK] button.[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-97 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Set Mode using SSL Select the mode using SSL. 1 In the SSL/TLS page , select “Set Mode us ing SSL”, and then click the [Next] button. 2 Select the mode using SSL, and then click the [Apply] button .[...]

4 Specifying Settings Using PageScope Web Connection 4-98 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Processing Mode When this machine is to be connected t o an SSL se rver as a c lient, you ca n specify the operation meth od when the validation of the SSL server certifi- cate has expired. 2 Note The functions tha[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-99 Specifying Setting s Using PageScope Web Conne ction Chapter 4 3 Select the processin g method, and then click the [Apply] button.[...]

4 Specifying Settings Using PageScope Web Connection 4-100 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.31 Authentication User Authentication/Account Track The settings that can be sp ecified are described below. Item Description User Authen tication Sele ct “OFF”, “ON (External Ser ver)”, or “ON (MF P)?[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-101 Specifying Setting s Using PageScope Web Conne ction Chapter 4 To specify the user authenti cation and account track settings 1 On the Networ k tab, c lick [Authentication]. 2 Enter the required settings. 3 Click the [Apply] button.[...]

4 Specifying Settings Using PageScope Web Connection 4-102 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Auto Logout Specify auto logout settings for Administrator mode and User mode. If no operation is performed within th e specified time, the administrator or user is automatically logged out. Item Description Admin[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-103 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.32 OpenA PI Specify OpenAPI. 2 Reminder The setting of [Use SSL/TLS] and [Por t No. (SSL/TLS)] is available only when the SSL/TLS setting is valid. Item Description Port No. Enter the port number (input range: 1[...]

4 Specifying Settings Using PageScope Web Connection 4-104 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.33 TCP Socket Setting You can specify TCP socket settings. The settings that can be sp ecified are described below. 2 Reminder When changing the TCP socket settings, be sure to turn the power of this machine off[...]

Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-105 Specifying Setting s Using PageScope Web Conne ction Chapter 4 To specify the TCP socket settings 1 On the Networ k tab, clic k [TCP Socket Setting]. 2 Enter the required settings. 3 Click the [Apply] button.[...]

4 Specifying Settings Using PageScope Web Connection 4-106 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4[...]

5 Scan Function Troublesh ooting Chapter 5 Scan Function Troubleshooting[...]

5 Scan Function Troubleshooting 5-2 bizhub 75 0/600 Scan Function Troublesh ooting Chapter 5 5 Scan Function Troubleshooting 5.1 Error List If an error message appears, take action as described below. Message Cau se a nd Re medy Cannot connect to the network. A connection to th e network co uld not be established. Ch eck if the network cable is cor[...]

6 Appendix Chapte r 6 Appendix[...]

6 Appendix 6-2 bizhub 75 0/600 Appendix Chapte r 6 6 Appendix 6.1 Product Specifications Scanning Functions Item Specifications Scan Sp eed Same as the copier Scanna ble Range S ame as the co pier (11 × 17 maximum) Functions Scan to E-Mail Scan to FTP Scan to SMB Save in U ser BOX Scanner Reso lution 200/300/400/600 dpi Scannable Paper Size 11 × [...]

Appendix 6 bizhub 750/600 6-3 Appendix Chapte r 6 Network Function * If you set the search condition to “OR” or “END” when using the Lotus Domino Server, it will not work properly. Item Specifications Type Embedded Frame Type IEEE802.2/802.3/Etherne t II/IEEE802.3SNAP Cable Type 10Base-T/100Base- TX Connector RJ-45 Support ed Protocols TCP/[...]

6 Appendix 6-4 bizhub 75 0/600 Appendix Chapte r 6 Important In order to incorporate improvements, these product specificat ions are sub- ject to change without notice. Status Indicat ors 10/100Base-T UTP Cable Specific ations - General Ethernet standa rds apply when connecting a 10/100Base- T UTP cable to an RJ-45 connec tor on the network. Use ca[...]

Appendix 6 bizhub 750/600 6-5 Appendix Chapte r 6 6.2 Entering text The following procedure describes how to use the keyboard that a ppears in the touch panel fo r typing in the names of registered accounts and custom paper sizes. The keypad can als o be used to type in numbers. Any of the following keyboards may appear. Example Password input scre[...]

6 Appendix 6-6 bizhub 75 0/600 Appendix Chapte r 6[...]

Appendix 6 bizhub 750/600 6-7 Appendix Chapte r 6 To type text % Touch the button for th e desired character from the keyboard that ap- peared. – To type in uppercase letters or sy mbols, touch [Shift]. – Numbers can also be ty ped in with the keypad. The entered c haracters a ppear in the text box. 2 Note To cancel change s to the settings, to[...]

6 Appendix 6-8 bizhub 75 0/600 Appendix Chapte r 6 6.3 Glossar y Term Definition 10Base-T/100Ba se-TX/ 1000Base-T An Ethernet standar d, which is a cable cons isting of twisted coppe r wire pairs. The transmis sion speed of 10Base-T is 10 Mb ps, of 100Base-TX is 100 Mbps, and of 10 00Base-T is 1000 Mbps. Active Directory A service that manages a ll[...]

Appendix 6 bizhub 750/600 6-9 Appendix Chapte r 6 Default Th e initial settings. The set tings first select ed when the machin e is turned on, or the setting s first specified when the functi on is select- ed. Default Gatew ay A device, such as a com puter or router, used as a “gateway ” to ac- cess comput ers not on the same LAN. Density An in[...]

6 Appendix 6-10 bizhub 750/600 Appendix Chapte r 6 HTTP Abbreviation for Hype rText Transfer Protocol. A pro tocol used t o send and receive dat a between a Web serv er and a client (Web browser). Doc uments contai ning images, recordin gs, and video clips can be ex changed wit h the expre ssive form informat ion. ICM Abbreviation fo r Image Color [...]

Appendix 6 bizhub 750/600 6-11 Appendix Chapte r 6 LPD Abbreviation for Line Printer Daemon. A printer prot ocol that uses TCP/IP and is platf orm-independe nt. Originally developed for BSD UNIX, it has become the standard pr inting protocol and can be used with any gener al computer. LPR/LPD Abbreviation for Line Printer Request/L ine Printer Daem[...]

6 Appendix 6-12 bizhub 750/600 Appendix Chapte r 6 PASV Abbreviation for PASsiVe. A m ode for connecti ng to an FTP server from within a firewall. If this mode is not specified, the firewall will be considered inaccessible and the connection will be terminated, pre- venting the file fr om being sent. Peer-to-pe er A network format tha t allows conn[...]

Appendix 6 bizhub 750/600 6-13 Appendix Chapte r 6 Scanning With the scanning operation of the scanner , an image is read while the row of image sen sors is gradua lly moved. The dire ction that the image sensors are moved is called the main scanning directi on, and the direction in which the image se nsors are ar ranged is ca lled the sub-scanning[...]

6 Appendix 6-14 bizhub 750/600 Appendix Chapte r 6 6.4 Ind ex A Abbreviated destinations ...... ......... 3-10 Access setting ........ ........ ............ . 3-133 Account track informati on ....... ...... 4-19 Account track registrati on ....... ...... 4-53 Action for Invalid Certif icate ........ 3 -121 Address book ...... 2-12 , 2-2 4 , 2-36 , [...]

Appendix 6 bizhub 750/600 6-15 Appendix Chapte r 6 Frame erase ............. ......... ........... .. 2-65 FTP destination registration .... ....... 3-12 FTP server settings ........ ......... ....... 4-73 FTP settings ............. ......... ... 3-66 , 4-73 Full scan .............. ........... ......... ....... 2-64 G Group ....... ........ ......[...]

6 Appendix 6-16 bizhub 750/600 Appendix Chapte r 6 Public user ........ ............ ........ ......... 4-11 R RAW port number ...... ........... ......... 3-53 Registered user ... ........... ......... ...... 4-13 Registering box destinations ......... 3-20 Registering destinations ........ 1-7 , 3-1 0 Registering e-mail destinations ..... 3-10 Re[...]

Appendix 6 bizhub 750/600 6-17 Appendix Chapte r 6 User mode settings via PageScope Web Connection ............ ......... ......... 4 -2 User setting screen ........ ......... ......... 3 -7 User’s guide con ventions ............ .. x-19 User’s guides .............. ............ ....... x -20 W Warning explanation ......... ........... .. x-19 [...]

6 Appendix 6-18 bizhub 750/600 Appendix Chapte r 6[...]

C opyri g h t 2007 Printed in C hin a 200 7. 1 5 7AE97363H htt p ://konicaminolta.com ● This manual was printed usin g 100 % post-consumer recycled paper.[...]