Kyocera FS-C5300DN manual

/0%2!4)/.'5)$% & 3     & 3     $ #+'" *870CKGB20008* FS-C5 1 00DN/C5200DN/C5300DN[...]

i Contents Legal and Safety Information 1 Machine Parts Components at the Front of the Printer .................... .............. 1-2 Components at the Left of the Pr inter ............. ................ ........ 1-2 Internal Components ............... ................ ................ ................. . 1-3 Components at the Rear of the Pr inter[...]

ii General Information .................. ................... ................ .............. 7-2 Expansion Memory Modules ............................ .................... .... 7-3 General Description of Options .................. ................... ........... 7-5 8 Computer Interface Interface . ... ... .... ... ... ... .... ... ... ...........[...]

iii Le gal and Safety Inf or ma tion Notice on Sof tware SOFTW ARE USED WITH THIS PRINTER MUST SUPPOR T THE PRINTER'S EMULA TION MODE. The printer is factory-set to emulate the PCL. Notice The information in this guide is subject to change without notification. Additional pages may be inserted in future editions. The user is asked to excuse an[...]

iv License Agreements T ypeface T rademark Acknowledgement All resident fonts in this printer are licensed from Mono ty pe Imaging Inc. Helvetica, Palatino and T imes are registered trademarks of Linotype-Hell AG . ITC A vant Garde Gothic, ITC Bookman, ITC Zap fChan cery and ITC Zapf Dingbat s are registered trademarks of International T ypeface Co[...]

v 9 Y our exclusive remedy and the sole liability of Monotype Imaging in connection with the Software and T ypefaces is rep air or replacement of defective parts, upon their return to Mo notype Imaging. 10 IN NO EVENT WILL MONOTYPE IMAGING BE LIABLE FOR LOST PROFITS, LOST DA T A, OR ANY OTHER INCIDENT AL OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES CAU[...]

vi 6 Redistributions of any form whatsoever must retain the fo llowing acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL T oolkit (http:// www .openssl.org/)" THIS SOFTW ARE IS PROVIDED BY THE OpenSSL PROJECT "AS IS" AND ANY EXPRESSED OR IMPLIED W ARRANTIES, INCLUDING , BUT N[...]

vii 4 If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: "This product includes software written by T im Hudson (tjh@cryptsoft.com) " THIS SOFTW A RE IS PROVIDED BY ERIC YOUNG "AS IS" AN D ANY EXPRESS OR IMPLIED W ARRANTIES, INCLUDING[...]

viii Compliance and Conformity This equipment has been tested and found to comply with the limit s for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency e[...]

ix S a fe t y I n fo r m at i o n Laser Safety This printer is certified as a Class 1 laser product under the U.S. Department of Health and Human Services (DHHS) Radiation Performance S tandard according to Radiation Control for Health and Safety Act of 1968. This means that the printer does not produce hazardous laser radiation. Since radiation em[...]

x Cautionary Labels The printer bears any of the following labels. For Europe, Asia, and other countries For U.S.A. and Canada High temperature inside. Do not touch part s in this area, because there is a danger of getting burned. Label inside the printer (Laser radiation warning)[...]

xi CDRH Regulations The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration implemented regulations for laser products on August 2, 1976. These regulations apply to laser product s manufactured after August 1, 1976. Compliance is mandatory for products marketed in the United S tates. A label indicating complia[...]

xii Canadian Dep artment of Communications Compliance St atement This Class B digital app aratus complies with Canadian ICES-003. A vis de conformité aux normes du ministère des Communications du Canada Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. EN ISO 7779 Maschinenlärminformations-V erordnung 3. GPSGV , [...]

xiii Energy Saving Control Function The device comes equipped with a Low Power Mode where energy consumption is reduced after a certain amount of time elapses since the device was last used, as well as a Sleep Mode where printer functions remain in a waiting state but power consumption is still reduced to a minimum when there is no activity with th[...]

xiv Inst allation Precautions Environment Other Precautions Adverse environmental conditions may af fect the safe operation and performance of the printer . Install in an air-conditioned room (recommended room temperature: around 23 °C, humidity: around 60 % RH) and avoid the following locations when selecting a site for the printer . - Avoid lo c[...]

xv Power Supply/Grounding the Printer Other Precautions Connect the power plug to the closest outlet possible to the printer . Handling of Plastic Bags W ARNING Do not use a power supply with a volt age other than that specified. Avoi d mu lt iple connections in the same outlet. These types of situations present a danger of fire or electrical shock[...]

xvi Precautions for Use Cautions when Using the Printer • Do not place metallic object s or containers with water (flower vases, flower pots, cups, et c .) on or near the printer . This type of situation presents a danger of fire or electrical shock should they fall in s ide. • Do not remove any of the covers from the printer as there is a dang[...]

xvii Other Precautions • Do not place heavy objects on the printer or cause other d amage to the printer . • Do not open the top/left/rear cover , turn of f the main switch, or pull out the power plug during printing. • During printing, some ozone is released, but the amount does not cause any ill effect to one's health. If, however , th[...]

xviii About the Operation Guide This Operation Guide has the following chapters: Chapter 1 - Machine Parts This chapter explains the names of part s. Chapter 2 Handling Paper Explains how choose, handle and load paper . Chapter 3 - Printing Operation This chapter explains how to print from your workstation. Chapter 4 - Maintenance This chapter expl[...]

xix Caution Caution s are statements that suggest mechanical damage as a result of an action. CAUTION Do not pull the ca ssette out when holding the fron t of the machine. Warni ng Used to alert users to the possibility of personal injury . W ARNING High voltage is present in the charger se ction.[...]

xx[...]

Machine Par ts 1-1 1 Mac hine Par ts This chapter provides explan ations and illustrations for you to determine the parts and their funct i ons. Try to be familiar with the names and functions of these parts for correct use and optimal performance. This chapter contain s explanations on the following topics: Component s at the Front of the Printer [...]

1-2 Machine Pa rts Component s at the Front of the Printer 1 Operation Panel 2 Front Cover 3 Paper Stopper 4 T op Cover (T op T ray) 5 MP (Multi-Purpose) T ray 6 Paper Cassette 7 Power Switch Component s at the Left of the Printer 8 Lef t Cover 9 W aste T oner Box 10 Main Charger Units on the Drum Units 1 1 Magent a T oner Cont ainer (M) 12 Cyan T [...]

Machine Par ts 1-3 Internal Component s 15 Paper T ransfer Unit 16 Paper Ramp 17 Duplex Unit 18 Envelope Switch Component s at the Rear of the Printer 19 USB Memory Slot 20 Power Cord Connector 21 Option Interface Slot 22 Network Indicators 23 Network Interface Connector 24 USB Interface Connector 25 Rear Cover 18 19 20 21 22 23 24 25 15 17 16[...]

1-4 Machine Pa rts Operation Panel 26 Message Display 27 Ready Indicator 28 Dat a Indicator 29 Attention Indicator 30 Arrow Keys 31 [MENU] Key 32 [OK] Key 33 [GO] Key 34 [Cancel] Key 26 27 28 29 30 31 32 33 34[...]

Handling Paper 2-1 2 Handling P a per This chapter contain s explanations on the following topics: General Guidelines 2-2 Selecting the Right Paper 2-4 Paper T ype 2-13 Loading Paper 2-14[...]

2-2 Handling Pap er General Guidelines The machine is designed to print on standard copier p aper (the type used in ordinary dry copier machines), but it can also accept a variety of other types of paper within the limit s specified below . Selection of the right paper is important. Using the wrong p aper can result in paper jams, curlin g, poor pr[...]

Handling Paper 2-3 Minimum and Maximum Paper Sizes The minimum and maximum paper s izes are as follows. For non st andard paper such as transp arency , labels, vellum, cardstock, envelope, coated and thick, the MP (Multi-Purpose) tray must be used. Recommended Paper The following products are recommended for use with the printer for optimum perform[...]

2-4 Handling Pap er Selecting the Right Paper This section describes the guidelines for selecting paper . Condition Avoid usin g paper that is bent at the edges, curled, dirty , torn, embossed, or contaminated with lint, clay , or p aper shreds. Use of paper in these conditions can lead to illegible printing an d paper jams, and can shorten the lif[...]

Handling Paper 2-5 Smoothness The paper should have a smooth, unc oated surface. Paper with a rough or sandy surface can cause voids in the printed output. Paper that is too smooth can cause multiple feeding and fogging problems. (Fogging is a gray background effect.) Basis We ight Basis weight is the weight of paper expressed in grams per square m[...]

2-6 Handling Pap er Moisture Content Moisture content is defined as the percent ratio of moisture to the dry mass of the paper . Moisture can affect the paper’s appearance, feed ability , curl, electrostatic properties, and toner fusing characteristics. The moisture content of the paper varies with the relative humidity in the room. When the rela[...]

Handling Paper 2-7 Packaging : Paper should be packed in a sturdy carton to protect it from damage during transport. Quality p aper obtained from a reput able supplier is usually correctly packaged. S pecial Paper The following types of special paper can be used: Use paper that is sold specifically for use with copiers or printers (heat- fusing typ[...]

2-8 Handling Pap er T ransparency T ransparencies must be able to withstand the heat of fusing during the printing process. The recommended transparency product is 3M CG3700 (Letter, A4). The table below list s the specifications for transparency: T o prevent printing problems, feed transparencies into the printer one sheet at a time from the MP tr[...]

Handling Paper 2-9 Labels Labels must be fed from the MP tray . The basic rule for printing on adhesive labels is that the adhesive must never come into contact with any part of the machine. Adhesive p aper sticking to the drum or rollers will damage the machine. Label paper has a structure comprising of three layers, as shown in the diagram. The t[...]

2-10 Handling Pap er Postcards Fan the stack of postcards and align the edges before loading them in the MP tray . Make sure the postcards you are going to set are not curled. Feeding curled postcards may cause paper jams. Some postcards have rough edges on the back (those are created when the paper is cut). In this case, put the postcards on a fla[...]

Handling Paper 2-11 Thick Paper Fan the stack of p aper and align the edges before loading them in the MP tray . Some types of paper have rough edges on the back (those are created when the paper is cut). In this case, put the paper on a flat place and rub the edges once or twice with, for example, a ruler to smooth them. Feeding rough edged paper [...]

2-12 Handling Pap er Paper T ype Indicators (Optional p aper feeder PF-510) If you are going to load non standard p aper in the optional paper feeder PF-510, cut out the blank section of the attached p aper type indicator sheet, fold the remaining sheet in half and insert it into the cassette's display folder so that the paper type symbol is d[...]

Handling Paper 2-13 Paper T ype The printer is capable of printing under the optimum setting for the type of paper being used. Setting the paper type for the p aper source from the printer ’ s operation panel will cause the printer to automatically select the p aper source and print in the mode best suited to that type of paper . A different p ap[...]

2-14 Handling Pap er Loading Paper The following explains the procedure for loading paper in the cassette and the MP tray . Loading Paper into the Cassette 1 Fan the media (paper/transparencies), t hen tap it on a level surface to avoid media jams or skewed printing. 2 Pull the paper cassette all the way out of the printer . 3 T urn the paper size [...]

Handling Paper 2-15 4 Pull the release lever of both side guides and slide to the desired paper size. 5 Pull the release lever and slide the paper stopper to the desired p aper size. When using non-standard size paper , move the paper guides and paper stopper all the way out, insert the paper , then adjust the paper guides and paper stopper to the [...]

2-16 Handling Pap er 7 Insert the paper cassette into the slot in the printer . Push it straight in as far as it will go. There is a paper gauge on the right side of the front of the p aper cassette to indicate the remaining paper supply . When paper is exhausted, the pointer will go down to the level of (empty). Loading Paper into the MP (Multi-Pu[...]

Handling Paper 2-17 4 Adjust the position of the paper guides on th e MP tray . S tandard paper sizes are marked on the MP tray . For standard paper sizes, slide the guides to the position marked correspondingly . 5 Align the paper with the p aper guides and insert as far as it will go. 6 Set the MP tray paper size on the printer ’s operation p a[...]

2-18 Handling Pap er Paper stopper Align the paper stopper to the desired p aper size. • For A4 or Letter size paper : Align with position ➀ . • For Legal size paper : Align with position ➁ .[...]

Printing Operation 3-1 3 Printing Oper a tion This chapter contain s explanations on the following topics: Changing Network Interface Parameters 3-2 Printing a Network Interface S tatus Page 3-10 Inst alling the Printer Driver 3-1 1 Printing from Application Sof tware 3-17[...]

3-2 Printing Operation Changing Network In terface Parameters This printer supports TCP/IP , TCP/IP (IPv6), NetW are, AppleT alk, IPP , SSL Server , IPSec protocols and Security Level. (For details refer to Advanced Operation Guide .) TCP/IP, TCP/IP (IPv6) settings 1 Press [MENU] . 2 Press U or V repeatedly until Network > appears. 3 Press Z . E[...]

Printing Operation 3-3 TCP/IP This section describes how to enable the TCP/IP protocol. 1 If TCP/IP is set to Off , use U or V to select On and press [OK] . 2 Press Z . Each time you press U or V , the selection changes. 3 Display the item you want to set and press [OK] . A blinking question mark ( ? ) appears while you are setting DHCP and Bo njou[...]

3-4 Printing Operation TCP/IP (IPv6) This section describes how to enable the TCP/IP (IPv6) protocol. 1 If TCP/IP (IPv6) is set to Off , use U or V to selecto On and press [OK] . 2 Press Z . Each time you press U or V , the selection changes. 3 Display the item you want to set and press [OK] . A blinking question mark ( ? ) appears while you are se[...]

Printing Operation 3-5 3 Press Z . Each time you press U or V , the selection changes. Refer to the explanations below when specifying the settings. If you are using NetWare , AppleTalk , IPP , SSL Server or IPSec to connect to a network, you must enter an administrator ID. By default, the administrator ID is the num eric part of your printer'[...]

3-6 Printing Operation Set the Security Level to High . NetW are This section explains the procedure for enabling NetW are. 1 Enter the administrator ID and password. Then, if Ne tWare is set to Off , use U or V to select On and press [OK] . 2 Press Z . 3 Press [OK] . A blinking question mark ( ? ) appears. Each time you press U or V , the selectio[...]

Printing Operation 3-7 AppleT alk This section explains the procedure for enabling AppleT alk. 1 Enter the administrator ID and p assword. Then, if AppleTalk is set to Off , use U or V to select On . 2 Press [OK] . A blinking question mark ( ? ) appears. 3 Press [OK] again. 4 Press [MENU] . The display returns to Ready . IPP This section explains t[...]

3-8 Printing Operation SSL Server This section explains the procedure for enabling SSL Server . 1 Enter the administrator ID and p assword. Then, if SSL Server is set to Off , use U or V to select On and press [OK] . 2 Press Z . Each time you press U or V , the selection changes. 3 Display the item you want to set and press [OK] . A blinking questi[...]

Printing Operation 3-9 Security Level Security Level is primarily a menu used by service personnel for maintenance work. There is no need for customers to use this menu. >Security Level High[...]

3-10 Printing Operation Printing a Network I nterface St atus Page Y ou can print out a status p age for the network interface. The network status page shows the network addresses, and other information under various network protocols about the network interface. Adjust/Maintenance Adjust/Maintenance is used to adjust the print quality and to carry[...]

Printing Operation 3-11 Inst alling the Printer Driver Ensure the printer is plugged in and connected to the PC before installing the printer driver from the CD-ROM. Inst alling the Software in W indows If you are connecting this printer to a Windows PC, follow the next step s to install the printer driver . The example shows you how to connect you[...]

3-12 Printing Operation Express Mode In Express Mode, the installer automatically detect s the printer when it is turned on. Use Express Mode for standard conn ec tion methods. 1 In the inst allation method selection window , select Express Mode . The print system detection window appears and the installer detect s the connected printers. If the in[...]

Printing Operation 3-13 Custom Mode Use Custom Mode if you want to specify the printer port and select the software to be inst alled. For example, if you do not want fonts inst alled on your computer to be replaced, select Custom Mode and deselect the Fon t s checkbox in the installation window . 1 Select Custom Mode . 2 Following the instructions [...]

3-14 Printing Operation 6 The printer driver installation program st arts up. 7 Choose Select Destination , Inst allation T ype and then install the printer driver as directed by the instructions in the installation software. IMPORT ANT In the Authenticate screen, enter the name and password used to log in to the operating syste m. This completes t[...]

Printing Operation 3-15 10 Click the IP icon for an IP connection or the AppleT alk icon for an AppleT alk connection and then enter the IP address and printer name. 11 Select the installed p rinter driver and click Add . 12 Select the options available for the printer and click Continue .[...]

3-16 Printing Operation 13 The selected printer is added. This completes the printer setup procedure.[...]

Printing Operation 3-17 Printing from Application Sof tware The steps required to print a document created with an application are explained below . Y ou can select the printing Paper Size and Output Destination. 1 Load the paper required into the p aper cass ette. 2 From the application File menu, select Print . The Print dialog box displays. 3 Cl[...]

3-18 Printing Operation St atus Monitor The S tatus Monitor monitors the printer st atus and provides an ongoing reporting function. It also allows you to specify and modify settings for printers not included in the KX driver . The S t atus Monitor is installed automatically during KX driver inst allation. Accessing the St atus Monitor Use either o[...]

Printing Operation 3-19 3D View This shows the status of the monitored printer as a 3D image. Y ou can choose whether to show or hide the 3D view from the menu displayed when you right-click the S tatus Monitor icon. If an information notification event occurs, the 3D view and an alert sound are used to notify you. For information on the sound noti[...]

3-20 Printing Operation St atus Monitor Settings Use the Preference option to set up the S tatus Monitor . The S tatus Monitor has two t abs to configure its settings. Sound Notification T ab The Sound Notification tab contains the following items . IMPORT ANT To confirm the settings on S ound Notification tab, the computer requirs the sound capabi[...]

Printing Operation 3-21 Appearance T ab The Appearance tab is contains the following items. Enlarge window Doubles the size of the S tatus Monitor window . Always on top Positions the S tatus Monitor in front of other active windows. T ransparency Displays the S tatus Monitor as a transp arent window .[...]

3-22 Printing Operation Uninst alling Software (W indows PC) The software can be uninst a lle d (r emoved) using the CD-ROM (Product Library) supplied with the printer . IMPORT ANT On Macintosh co mputers, be cause the printer settings are specified using a PPD (PostScript Printer Description) file, the software cannot be uninstalled using the CD-R[...]

Maintenanc e 4-1 4 Maintenance This chapter contain s explanations on the following topics: General Information 4-2 T oner Cont ainer Replacement 4-2 Replacing the W aste T oner Box 4-6 Cleaning the Printer 4-8[...]

4 -2 Maintenance General Information This chapter describes basic maintenance tasks you can perform on the printer . Y ou can replace the following component according to the printer ’s display: • T oner Kits • W aste T oner Box Also, the following parts need periodic cleaning: • Paper T ransfer Unit T o ner Cont ainer Replacement The toner[...]

Maintenanc e 4 -3 FS-C5300DN T oner Kit s For best results, we recommend that you only use genuine Kyocera Parts and Supplies. Should any damage be caused by the application of a toner other than the original Kyocera Mita toner , then this damage is excluded from the guarantee. The toner kits are supplied in 4 dif ferent colors: cyan, magenta, yell[...]

4-4 Maintenance Replacing the T oner Cont ainer This section explains how to replace the toner containers. When replacing the toner container of any color , always replace the waste toner box at the same time. If this box is full, the printer may be damaged or contaminated by the waste toner that may spill over the box. IMPORT ANT During toner cont[...]

Maintenanc e 4-5 3 Put the old toner container in the plastic bag (cont ained in the toner kit) and discard it later according to the local code or regulations for waste disposal. 4 T ake the new toner container out of the toner kit. 5 Shake the new toner cont ainer 5 or 6 times as shown in the figure in order to distribute the toner evenly inside [...]

4-6 Maintenance Replacing the W aste T oner Box Replace the waste toner box when the Check waste toner box message is displayed. A new waste toner box is included with the toner kit. The waste toner box needs to be replaced before the printer will operate. 1 Open the lef t cover . 2 While holding the waste toner box, press the lock lever and then g[...]

Maintenanc e 4-7 5 Open the cap of the new waste toner box. 6 Insert the new waste toner box as shown in the figure. When the box is set correctly , it will snap into place. 7 Make sure that the waste toner box is correctly inserted and close the left cover . After replacing the toner cont ainers and the waste toner box, clean the paper transfer un[...]

4-8 Maintenance Cleaning the Printer The paper transfer unit should be cleaned each time the toner container and waste toner box are replaced. T o maintain optimum print quality , it is also recommended that the inside of the printer be cleaned once a month as well as when the toner container is replaced. It should also be cleaned if streaking or l[...]

Maintenanc e 4-9 3 Wipe away the paper dust on th e registration roller and the paper ramp using the cleaning cloth. 4 Push the front cover back in completely . Paper Ramp Transfer Belt (Black) Cleaning Cloth Registration Roller (Metal) Transfer Roller (Black) Duplex Unit Paper T r ansfer Unit Note Be careful not to touch the black transfer roller [...]

4-10 Maintenance[...]

Troubleshooting 5-1 5 T r oubleshooting This chapter contain s explanations on the following topics: General Guidelines 5-2 Print Quality Problems 5-3 Error Messages 5-6 Clearing Paper Jams 5-12 If a problem cannot be corrected, contact your service technician.[...]

5-2 Troubleshooting General Guidelines The table below provides basic solutions for problems you may encounter with the printer . We suggest you consult this t able to troubleshoot the problems before calling for service. Tips Printer problems may be solved easily by following the tips below . When you have encountered a problem that following the [...]

Troubleshooting 5-3 Print Quality Problems The tables and diagrams in the following sections define print quality problems and the corrective action you can conduct to solve the problems. Some solutions may require cleaning or replacing parts of the printer . If the suggested corrective action will not solve the problem, call for service. Printed R[...]

5-4 Troubleshooting Black or white vertical streaks Check the operation panel for toner . If the Toner low C,M,Y,K message is displayed with color description, install a new tone r kit for the color . T o replace the toner container , refer to T oner Container Replacement on page 4-2. Clean the main charger units. For details, refer to LSU/Charger [...]

Troubleshooting 5-5 Grey background Clean the main charger units. For details, refer to LSU/Charger (LSU/Main charger cleaning mode setting) section of the Advanced Operation Guide . Conduct color calibration either by switching the printer off then on or using the printer operation panel. For details, refer to Adjust/Maintenance (Adjust/Maintenanc[...]

5-6 Troubleshooting Error Messages The following table lists errors and maintenance messages that you can be dealt with by yourself. If Call servic e appears, turn off the p rinter , disconnect the power cord, and contact your service technician. If Call servic e or Error.Powe r off. is displayed, turn off the printer then turn it back on to see if[...]

Troubleshooting 5-7 Close top cover The top cover of the printer is open. Close the printer top cover . Device busy This message is displayed when Remove Device was selected while a USB memory was being used. The previous screen is displayed again 1 or 2 seconds. Duplex di sabled Press GO Y ou attempted to print with a paper size and p aper type th[...]

5-8 Troubleshooting Job not stor ed Press GO Printing using the Job Box function failed because there was insuf ficient space available on the hard disk or RAM disk, or because the RAM disk was disabled when demounting the hard disk. T o print an error report and return the printer to the print-ready status, press [GO] . Job restric ted Press GO Th[...]

Troubleshooting 5-9 Paper jam ########### #### A paper jam has occurred. The location of the p aper jam is indicated in place of the # ’s . F o r details, refer to Clearing Paper Jams on page 5-12 . Paper loadin g The selected cassette is being prepared. Paper path er ror There is no paper cassette in the feeder , or the cassette is not inserted [...]

5-10 Troubleshooting Storage Error Co des Hard Disk Errors ID error Wrong ID • The ID or Password entered for the Job Accounting function is not correct. Check the ID or Password. For more information, refer to Job Accounting (Job Accounting selection/setting) section of the Advanced Operation Guide . • The user ID entered for a private job, or[...]

Troubleshooting 5-11 Memory Card and USB Memory Errors RAM Disk Errors Code Meaning 01 The printer does not support the memory card inserted, or the memory card is broken. Insert the correct memory card. For more information, refer to Memory Card (Using the memory card) section of the Advanced Operation Guide . 02 The memory card is not installed. [...]

5-12 Troubleshooting Clearing Paper Jams If the paper jammed in the p aper transport system, or no paper sheets were fed at all, the Paper jam message appears and the location of the paper jam (the component wh ere the paper jam has occurred) is also indicated. The printer automatically goes off-line when this message is displayed. Remove jammed pa[...]

Troubleshooting 5-13 General Considerations for Clearing Jams Bear in mind the following considerations when attempting jam removal: • If paper jams occur frequently , try using a different type of p aper , replace the paper with p aper from another ream, flip the paper stack over , or rotate the p aper stack 180 degrees. The printer may have pro[...]

5-14 Troubleshooting Paper Jam in Printer Paper is jammed at the paper cassette or inside the printer . Remove the jammed paper using the procedure given below . 1 Press the lever to release the lock. 2 Pull the front cover towards you. 3 If the paper has jammed near the registration roller , as shown in A , remove the paper by pulling it up from t[...]

Troubleshooting 5-15 If the paper has jammed inside the duplex unit, as shown in C , lift the duplex unit and remove the paper by holding it in th e middle. 4 Close the front cover . Paper Jam at Cassette 2 (to 4) Paper is jammed at the p aper cassette. Remove the jammed paper using the procedure given below . Pull out the paper feeder and remove t[...]

5-16 Troubleshooting[...]

Using the Operation P an el 6-1 6 Using the Oper a tion Panel This chapter contain s explanations on the following topics: General Information 6-2 Underst anding the Operation Panel 6-3 Keys 6-6 Using the Menu Selection System 6-8 Setting a Mode Selection Menu 6-10 Report Print 6-1 1 USB Memory (USB memory selection) 6-17 Job Box 6-19 Counter (View[...]

6-2 Using the Operation Pan e l General Information This chapter provides the information you need to configure the Ecosys Color printer . In general you need to use the operation panel only to make default settings. Y ou can make most changes to the printer settings using the printer driver through the application software. Y ou can also access th[...]

Using the Operation P an el 6-3 Underst anding the Operation Panel The operation panel on the top of the printer has a 2-line by 16-character liquid crystal display (LCD), e ight keys, and three indicators (LED). Messages that appear on the display and functions of indicators and keys are explained in this chapter . Message Display The message disp[...]

6-4 Using the Operation Pan e l St atus Information Error Codes Refer to the T roubleshooting section in the Operation Guide . Message Meaning Self test The printer is performing self-diagnostics af ter power-up. Please wait The printer is warming up and is not ready . When the printer is switched on for the first time, this message will take sever[...]

Using the Operation P an el 6-5 Indicators in Message Display Ready , Data , and Attention Indicat ors The following indicators light dur ing normal operation and whenever the printer needs attention. Depending on the status of lighting, each indicator has the following meaning: Ready Indicator Description Flashing. Indicates an error that you can [...]

6-6 Using the Operation Pan e l Keys The operation panel keys are used to configure the printer operation. Note that certain keys have a secondary function. GO Key Use this key to: • Recover from certain errors. • Recover from Auto Sleep and Low Power mode. Cancel Key This key is used to: • Cancel a printing job. • S top the alarm sound. ?[...]

Using the Operation P an el 6-7 OK Key This key is used to: • Finalize settings of numeric values and other selections. • Set the paper source when Use a lternative? is shown in the message display .[...]

6-8 Using the Operation Pan e l Using the Menu Selection System Menu Selection System This section explains how to use the menu selection system. [MENU] on the operation panel allows you to use the menu to configure the printer settings to your specific needs. Settings can be made when Ready is indicated on the printer message display . Entering th[...]

Using the Operation P an el 6-9 Selecting a Menu The mode selection menu is hierarchical. Press U or V to display the desired menu. If the selected menu has a sub-menu, > is displayed after the menu. Press Z to move to the sub-menu or Y to go back. > is displayed before the sub-menu. Press Z to move to another sub-menu or Y to go back. >&g[...]

6-10 Using the Operation Pan e l Setting a Mode Selection Menu This section explains the setting procedures used for each menu item in the mode selection menu. 1 While the printer displays Ready , Please wait , Sleeping and Processing , press [MENU] . The mode selection menu is displayed. (For example : Report Print ) 2 Each time you press U or V ,[...]

Using the Operation P an el 6-11 Report Print The printer prints the report. Report Print includes the following items: • Print Menu Map • Print S tatus Page • Print Fonts List • Print Hard Disk File List • Print RAM Disk File List • Print Mem. Card File List 1 Press [MENU] . 2 Press U or V repeatedly until Report Print > appears. No[...]

6-12 Using the Operation Pan e l Menu Map Sample Menu Map Printer FS-C5300DN Firmware version[...]

Using the Operation P an el 6-13 Print St atus Page Y ou can check the printer's current status, including availa ble memory space and option settings by printing a st atus page. 1 Press Z while Report Print > is displayed. 2 Press U or V repeatedly until >Print Status Page appears. 3 Press [OK] . A question mark ( ? ) appears. 4 Press [[...]

6-14 Using the Operation Pan e l 1 Firmware V ersio n This item shows the version and release date of the printer firmware. 2 Printer Settings Information This item shows various printer settings for hardware-related items: - MP tray paper size and type - Paper cassette size and type - Sleep time - Formfeed timeout time 3 Inst alled Options This it[...]

Using the Operation P an el 6-15 Print Font s List T o help you decide in selecting a font, you can printout lists of the internal fonts or the optional font s. 1 Press Z while Report Print > is displayed. 2 Press U or V repeatedly until >Print Fonts List appears. 3 Press [OK] . A question mark ( ? ) appears. 4 Press [OK] again. The message P[...]

6-16 Using the Operation Pan e l Print Mem. Card File List This allows you to print a list of the files on a memory card. IMPORT ANT This message will be displa yed when the memory card installed in the printer . 1 Press Z while Report Print > is displayed. 2 Press U or V repeatedly until >Print Mem. Card File List appears. 3 Press [OK] . A q[...]

Using the Operation P an el 6-17 USB Memory (USB memory selection) This specifies the settings for removing the USB memory and printing USB memory content. IMPORT ANT This mes sage is displaye d only when the USB host lock is not set. The options available in USB Memory are as follows: • Print File (Printing a file) • Copies (Number of copies) [...]

6-18 Using the Operation Pan e l Copies (Number of copies) Sets the number of cop ies printed of the specified file in USB memory . 1 While Copies in step 5 above is displayed, press U and V or Y and Z to display the number of copies. (E.g.: 10 ) 2 Press [OK] . Paper Source and a question mark ( ? ) appears. Paper Source (Selecting the p aper feed [...]

Using the Operation P an el 6-19 Job Box IMPORT ANT T o use the Job Box, an optional hard disk must be installed in the printer . The RAM disk may also be used in the Proof-and-Hold and Private Print modes. Job Box is a print function that makes the Job Retention function possible. The settings are specified from the printer driver . Refer to KX Pr[...]

6-20 Using the Operation Pan e l (Data Name) ID (number of copies) (Input p asswords) (Data Name) Copies (number of copies) (Number of copies / deleted) • Job Box Configuration (Job Box Configuration) 1 Press [MENU] . 2 Press U or V repeatedly until Job Box > appears. Note that menus shown in the list may vary depending on which optional units[...]

Using the Operation P an el 6-21 Printing Additional Copies using Quick Copy 1 Press Z while Job Box > is displayed. 2 Press U or V repeatedly until >Quick Copy appears. The name entered in the printer driver ( Harold , in this example) also appears. 3 Press [OK] . A blinking question mark ( ? ) appears before the user name. 4 Press U or V to[...]

6-22 Using the Operation Pan e l Using Proof-and-Hold When you print multiple copies, this mode first prints one copy so that you can proof it before continuing to print the remaining copies. Since you can proof the printouts before printing the remaining copies, wast age of paper can be reduced. The printer prints one copy and, at the same time, s[...]

Using the Operation P an el 6-23 Private/S tored (Printing a private print/stored job) In private printing, you can specify that a job is not printed until you release the job from the operation panel. When sending the job from the application software, specify a 4-digit access code in the printer driver . The job is released for printing by enteri[...]

6-24 Using the Operation Pan e l Deleting a Privat e/Stored Job Y ou can individually delete stored jobs by performing the following procedure. Jobs saved using Private Print will be automatically deleted if you turn the power off af ter printing, but jobs saved using S tored Job will not be deleted automatically . 1 Follow steps 1 through 6 in the[...]

Using the Operation P an el 6-25 Counter (Viewing the counter value) Displays the number of pages printed. The options available in Counter are as follows: • Printed Pages (Displaying the total printed p ages) • Color (Displaying the color printed pages) • Monochrome (Displaying the monochrome printed pages) 1 Press [MENU] . 2 Press U or V re[...]

6-26 Using the Operation Pan e l Paper Settings This sets the p aper size and type for the MP tray and cassettes from which paper is supplied. The options available in Paper Settings are as follows: • MP T ray Size (Setting MP tray paper size) • MP T ray T ype (Setting the MP tray paper type) • Cassette (1 to 4) Size (Setting the cassette pap[...]

Using the Operation P an el 6-27 Legal Custom Hagaki OufukuHagaki Oficio II Statement Folio Youkei 2 Youkei 4 16K 5 Press [OK] . 6 Press [MENU] . The display returns to Ready . MP T ray T ype (Setting the MP tray paper type) Y ou can use this to set the paper type t hat can be supplied from the MP tray . The default setting is PLAIN . For more info[...]

6-28 Using the Operation Pan e l Cassette (1 to 4) Size (Setting the ca ssette paper size) T o set the standard sizes A5, A4, B5, Letter , and Legal size for the paper cassette, load the paper and turn the p aper size dial so that the size of the paper you are going to use appears in the paper size window . T o load a non-standard p aper siz e (siz[...]

Using the Operation P an el 6-29 Envelope C5 A6 B6 A5 B5 ISO B5 A4 Executive Letter Legal Custom Hagaki OufukuHagaki Oficio II Statement Folio Youkei 2 Youkei 4 16K 5 When the desired paper size is displayed, press [OK] . The p aper size is set for the paper cassette. If you selected Custom in step 4, be sure to set the unit of measurement and the [...]

6-30 Using the Operation Pan e l Entering the Wid th and Length Enter the paper size for X Dimension and Y Dimension as shown in the figure. 1 When the unit of measurement is set, press V . >>X Dimension appears (the p aper width setting). 2 Press [OK] . A blinking cursor ( _ ) appears. 3 Press U or V to increase or decrease the value of the [...]

Using the Operation P an el 6-31 Cassette (1 to 4) T ype (Setting the cassette paper type) By setting a paper type (plain, recycled, etc.) for the paper cassette, you can automatically select the paper in the paper cassette according to the paper type you command on the printer driver . The default setting is plain paper for all p aper cassettes. I[...]

6-32 Using the Operation Pan e l T ype Adjust (Creating custom p aper type) The following describes the procedure used to set a user-defined paper type for the printer . Eight custom us er settings may be registered. Af ter having been set, any of these may be called up when setting the paper type for a paper source. The paper weight and duplex p a[...]

Using the Operation P an el 6-33 Paper Weight (Setting the paper we ig ht) Y ou can set the paper th ickness for your custom paper type to be customized.The default setting is Normal 2 . 1 Display the custom paper type (refer to T ype Adjust (Creating custom paper type) on page 6-32 ) and press Z . 2 Press U or V repeatedly until >>Paper Weig[...]

6-34 Using the Operation Pan el Print Settings These settings specify printing parameters such as the print quality used for printing (Normal or Fine), the gloss mode (Low or High), the number of copies, reduced printing and the page orientation. The options available in Print settings are as follows: • Paper Source (Selecting the paper feed sour[...]

Using the Operation P an el 6-35 Paper Feed Mode (Setting the p aper feed source) This mode specifies how the paper should be fed, af ter the paper feed source and paper type has been chosen. If Auto is selected, the printer searches for a paper feed source that matches the p aper size and type, and paper is delivered from that source. An error mes[...]

6-36 Using the Operation Pan e l Duplex (Duplex printing) Using the duplexer , you can automatically print on both sides of the paper . The duplexer is mounted underneath the printer . Duplex printing is available for the following paper t y pes: PLAIN PREPRINTED BOND RECYCLED ROUGH LETTERHEAD COLOR PREPUNCHED HIGH QUALITY Activating the duplexer i[...]

Using the Operation P an el 6-37 1 Press Z while Print Settings > is displayed. 2 Press U or V repeatedly until >Duplex appears. 3 Press [OK] . A blinking question mark ( ? ) appears. 4 Press U or V to display the desired binding mode. The message display toggles through the following: Off (default) Short edge bind Long edge bind 5 Press [OK][...]

6-38 Using the Operation Pan e l Emulation (Setting the emulation) Y ou can change the emulation mode for the current interface. Use the procedure below to select the mode. 1 Press Z while Print Settings > is displayed. 2 Press U or V repeatedly until >Emulation > appears on the message display . One of the emulation modes appears, indicat[...]

Using the Operation P an el 6-39 Color Mode (Selecting color or monochrom e printing) Y ou can use the Color Mode menu on the operation p anel to select the Monochrome or Color printing mode. By default, the printer is set to print in color mode. 1 Press Z while Print Settings > is displayed. 2 Press U or V repeatedly until >Color Mode appear[...]

6-40 Using the Operation Pan e l EcoPrint Mode (Selecting the EcoPrint mode) By enabling EcoPrint mode, you can minimize the amount of toner used during printing. Because images printed in this mode may be slightly coarser than those printed in standard resolution, you should use EcoPrint for test prints or other sit uations where high-quality prin[...]

Using the Operation P an el 6-41 Orient ation (Print orientat ion) Y ou can select portrait (upright) or landscape (sideways) p age orientation. 1 Press Z while >Page Set > is displayed. 2 Press U or V repeatedly until >>Orientation appears. 3 Press [OK] . A blinking question mark ( ? ) appears. 4 Select Portrait or Landscape using U or[...]

6-42 Using the Operation Pan e l Network (Network settings) This printer supports TCP/IP and TCP/IP (IPv6) protocols. IP is an abbreviation for Internet Protocol. This printer routinely uses the TCP/IP (IPv4) protocol, but provides a separate setting for the next- generation IP , IPv6. TCP/IP (IPv4) uses 32-bit IP addresses, but the rapid growth in[...]

Using the Operation P an el 6-43 3 Press [OK] . A blinking question mark ( ? ) appears. 4 Select On or Off using U or V . 5 Select On and press [OK] . The display changes to the settings shown below . DHCP (DHCP setting) DHCP (Dynamic Host Configuration Protocol) is the protocol that assigns the information required to est ablish a network connecti[...]

6-44 Using the Operation Pan e l 5 Display the desired IP address and press [OK] . 6 Press [MENU] . The display returns to Ready . Subnet Mask (Subnet mask setting) The subnet mask is a way of augmenting the network address section of an IP address. A subnet mask represents all network address sections as 1 and all host address sections as 0. The n[...]

Using the Operation P an el 6-45 4 Press U or V to increase or decrease, respectively , the value at the blinking cursor . Y ou can set any value between 000 and 255 . Use Y and Z to move the cursor right and lef t. 5 Display the desired gateway and press [OK] . 6 Press [MENU] . The display returns to Ready . Bonjour (Bonjour setting) Bonjour , als[...]

6-46 Using the Operation Pan e l 4 Select On or Off using U or V . 5 Select On and press [OK] .The display changes to the settings shown below . RA(St ateless) (RA (S tateless) setting) The IPv6 router communicates (transmits ) information such as the global address prefix using ICMPv6. This information is the Router Advertisement (RA). ICMPv6 stan[...]

Using the Operation P an el 6-47 Device Common (Selecting/Setting the common device) Selects/sets all the functions in this printer . The options available in Device Common are as follows: • MSG Language (Selecting the message language) • Buzzer (Alarm (Buzzer) setting) • RAM Disk Mode (Using the RAM disk) • Hard Disk (Using the optional ha[...]

6-48 Using the Operation Pan e l Buzzer (Alarm (Buzzer) setting) This function uses tones to notify the user of printer operations and the printer status. This setting is useful, for example, when the printer is located some distance from the user . The options available in Buzzer are as follows: • Key Confirm. (Key confirmation tone setting) •[...]

Using the Operation P an el 6-49 Ready (Prep aration completed tone setting) When On is selected in this setting, a tone sounds when print preparation has been completed. The default setting is Off . 1 Press Z while >Buzzer > is displayed. 2 Press U or V repeatedly until >>Ready appears. 3 Press [OK] . A blinking question mark ( ? ) app[...]

6-50 Using the Operation Pan e l RAM Disk Mode (Using the RAM disk) The RAM disk is a memory space shared within the printer memory that can temporarily store print jobs. The stored print job can then be used to print multiple copies of the job reducing the total amount of time required to print the whole job. It acts similar to the hard disk excep[...]

Using the Operation P an el 6-51 RAM Disk Size (Setting th e RAM disk si ze) Use this procedure to set the amount of memory used for the RAM disk. IMPORT ANT The RAM Disk Size menu option only appears when RAM Disk Mode is set to On . 1 Press Z while >RAM Disk Mode On > is displayed. 2 Press [OK] . The message display shows a blinking cursor [...]

6-52 Using the Operation Pan e l Format (Formatting hard disk) A new hard disk must be formatted before it can be used in the printer . Formatting allows data to be written to the hard disk. This menu is displayed only when the optional hard disk is installed on the printer . Use the procedure below to format the hard disk. When a new hard disk is [...]

Using the Operation P an el 6-53 Format (Formatting memory card) A new memory card must be formatted before it can be used in the printer . Formatting allows data to be written to the memory card. IMPORT ANT Format is only displayed wh en a memory card is inst alled in the printer and protection is disabled. When a new memory card is inserted in th[...]

6-54 Using the Operation Pan e l Duplex (Duplex printing error detect ion setting) If the error detection setting for duplex printing has been turned On , and you attempt to print onto a p aper size and paper type that cann ot be used for duplex printing, the Duplex disabled Press GO error message will be displayed and printing will stop. 1 Press Z[...]

Using the Operation P an el 6-55 Timer (T imer setting) This specifies timer-related settings such as the automatic form-feed timeout and the timeout settings for Auto Sleep. The options available in T imer are as follows: • Form Feed T ime Out (Automatic form feed timeout setting) • Sleep T imer (Sleep timer timeout time) • Auto Error Clear [...]

6-56 Using the Operation Pan e l Sleep Timer (Sleep timer timeout time) Y ou can adjust the length of time the printer waits before entering Auto Sleep in the absence of data. The printer reverts to normal operation mode when the printer receives a print job, the operation p anel is operated, or one of the exterior covers is opened. The default tim[...]

Using the Operation P an el 6-57 Auto Error Clear (Auto error clear setting) If an error that still allows you to continue printing occurs, the next received data is automatically printed af ter a set period of time elapses. For example, if the printer is shared over a network as a network printer and one person causes one of the above errors, afte[...]

6-58 Using the Operation Pan e l Error Clear T imer (Setting the error clea r time) If Auto Error Clear is set to On and a non-fatal error (an error that allows printing to continue) occurs, this setting specifies the time until the error is recovered and printing resumes. 1 Press Z while >Timer > is displayed. 2 Press U or V repeatedly until[...]

Using the Operation P an el 6-59 Auto Sleep (S etting the s leep timer) The printer has a sleep timer that is used to conserve power when the printer is not printing, processing, or receiving data. 1 Press Z while >Timer > is displayed. 2 Press U or V repeatedly until >>Auto Sleep appears. 3 T o turn off the sleep timer , press [OK] . A[...]

6-60 Using the Operation Pan e l Security The security functions can be set up to protect printer operation and the print data. The options available in Security are as follows: • ID (Administrator ID input) • Password (Administrator password input) • I/F Block (Interface (external device) block setting) • NetW are (NetWare setting) • App[...]

Using the Operation P an el 6-61 Password (Administrator Password input) T o set up the Security functions, you must enter an administrator ID and administrator password. For information on how to set the administrator password, refer to Admin (Administrator settings) on page 6-75 . 1 Once you have entered the correct ID in the previous step (ID (A[...]

6-62 Using the Operation Pan e l USB Device (USB interface setting) This locks and protects the USB interface. The default setting is Unblock . 1 Press Z while >I/F Block > is displayed. >>USB Device appears. 2 Press [OK] . A blinking question mark ( ? ) appears. 3 Select Block or Unblock using U or V . 4 Press [OK] . 5 Press [MENU] . T[...]

Using the Operation P an el 6-63 NetW are (NetW are setting) NetW are is a PC-based network operating system specifically for servers. NetW are is a cli ent-server system that operates by installing the NetW are OS on the server and dedicated client modules (NetWare clients) on the client machines (running MS-DOS, OS/2, Windows, etc.). The basic ne[...]

6-64 Using the Operation Pan e l AppleT alk (AppleT alk setting) AppleT alk is a communications protocol used primarily on Macintosh computers and also refers to the Mac OS network functions. AppleT alk assigns 24-bit n etwork addresses (a 16-bit network section and an 8-bit node address) that are used to identify devices (computers, printers, etc.[...]

Using the Operation P an el 6-65 SSL Server (SSL Server setting) SSL (Secure Sockets Layer) refers to a protocol used to encrypt information sent and received over a network. SSL can currently be used to encrypt data such as the WWW or FTP files widely used on the Internet so that privacy-related information, credit card numbers, corporate secrets [...]

6-66 Using the Operation Pan e l 3DES (SSL Server 3DES setting) 3DES (T riple Data Encryption S tandard) is a high level of encryption in which DES encryption is repeated threefold. The default setting is Off . 1 Press Z while >SSL S erver On > is displayed. >>3DES appears. 2 Press [OK] . A blinking question mark ( ? ) appears. 3 Select[...]

Using the Operation P an el 6-67 HTTPS (SSL Server HTTPS setting) HTTPS (HyperT ext Transfer Protocol Secure) is a protocol that adds SSL data encryption, message authentication and a digital signature function to the HTTP protocol used for data transfer between WWW servers and clients. S-HTTP is a similar protocol, but HTTPS differs in that it use[...]

6-68 Using the Operation Pan e l Job Accounting (Job Accounting selection/ setting) Job Accounting is a function that allows the number of pages used to be managed by each department to be managed through the use of entered account IDs. Job accounting on this machine offers the following features: • Support for up to 100 department s • Departme[...]

Using the Operation P an el 6-69 Password (Administrator Password input) T o set up Job Accounting, you must enter an administrator ID and administrator password. For information on how to set the administrator password, refer to Admin (Administrator settings) on page 6-75 . 1 Once you have entered the correct ID in the previous step (ID (Administr[...]

6-70 Using the Operation Pan e l Select Account (Dep artment-specific settings) This specifies the functions used for managing individual account IDs. The options available in Select Account are as follows: • Counter (Account-specific counter management [color + monochrome total]) • Color Counter (Account-specific counter management [color]) ?[...]

Using the Operation P an el 6-71 Restriction (Print res triction selection [co lor + monochrome total]) Sets restricted functionality for all printing on the currently selected account. Y ou can use the restrictions to prohibit printing by individual department s or to limit the number of pages they can print. 1 Set the account ID and then press U [...]

6-72 Using the Operation Pan e l Maximum Output (Maximum print output setting [color + monochrome tot al]) Limits the number of pages for all printing on the currently selected account. 1 Set the account ID and then press U or V repeatedly until >>Maximum Output appears. 2 Press [OK] . The message display shows a blinking cursor ( _ ). 3 Pres[...]

Using the Operation P an el 6-73 Add Account (Dep artment registration) This allows you to add a new account for which printing is permitted. IMPORT ANT Because account IDs are manag ed as numeric strin g s, " 1 " and " 001 " are handled as different accounts. Also, once Job Accounting is enabled, no jobs are printed unless info[...]

6-74 Using the Operation Pan e l Print Job Accounting List (Job Accounting li st output) This enables you to print the total number of p ages for all accounts as a Job Accounting list. 1 Press Z while Job Accounting > is displayed. 2 Press U or V repeatedly until >Print Job Accounting List appears. 3 Press [OK] . A blinking question mark ( ? [...]

Using the Operation P an el 6-75 Admin (Administrator settings) The administrator setting is a function that identifies the user who can use the printer and can be used to manage users. The administrator is authenticated by the entered administrator ID and password and can then use the printer's security functions and Job Accounting functions.[...]

6-76 Using the Operation Pan e l Password (Administrator Password input) Y ou can use this to set the administrator password. The default setting is the numeric part of your printer's model name. If you use FS-C5300DN, enter " 5300 ". 1 Once you have entered the correct ID in the previous step (ID (Administrator ID input)), the messa[...]

Using the Operation P an el 6-77 Change Password (Administrator Password change) Y ou can use this to change the administrator password. 1 In step 3 in Password (Administrator Password input) above, press U or V while the Admin (Change) screen is displayed until >Change Password appears. IMPORT ANT The administrator password is not displayed. 2 [...]

6-78 Using the Operation Pan e l Adjust/Maintenance (Adjust/Maintenance selection/setting) Adjust/Maintenance is used to adjust the print quality and to carry out printer maintenance. The options available in Adjust/Maintenance are as follows: • Color Calibration • Registration Normal (Color registration [standard]) • Registration Details (Co[...]

Using the Operation P an el 6-79 Registration Normal (Color registration [st andard]) When using the printer for the first time af ter set-up or after having moved it, or if printout of any color (magenta, cyan or yellow) is skewed, use this mode to correct the color registration on the operation panel. The options available in Regist ration Normal[...]

6-80 Using the Operation Pan e l Sample Color Registration Correction Chart 7 When printing ends, the display returns to Ready . I H G F E D C B A 0 1 2 3 4 5 6 7 8 9 MH-L I H G F E D C B A 0 1 2 3 4 5 6 7 8 9 CH-L I H G F E D C B A 0 1 2 3 4 5 6 7 8 9 YH-L I H G F E D C B A 0 1 2 3 4 5 6 7 8 9 MH-R I H G F E D C B A 0 1 2 3 4 5 6 7 8 9 CH-R I H G [...]

Using the Operation P an el 6-81 Adjust Magent a Corrects the registration for magent a (red). 1 Press Z while Adjust/Maintenance > is displayed. 2 Press U or V repeatedly until >Registration Normal > appears. 3 Press Z . 4 Press U or V repeatedly until >>Adjust Magenta appears. 5 Press [OK] . 0 will be displ ayed for each value and [...]

6-82 Using the Operation Pan e l Adjust Cyan (Cya n correction) and Adjust Y ellow (Y ellow correction) These options correct the registration for cyan (blue) and yellow . 10 After completing the settings for magent a in step 9 above, press V . >>Adjust Cyan will be displayed and, once you complete the settings for that color , >>Adjust[...]

Using the Operation P an el 6-83 6 Press [OK] . Processing appears and a color registration correction chart is printed out. There are horizonta l (H) and vertical (V) registration charts for each color (magent a, cyan and yellow) included on the color registration correction chart. 7 When printing ends, the display returns to Ready .[...]

6-84 Using the Operation Pan e l M 12345 3 ( Adjust magent a) Makes detailed corrections to the registration for magent a (red). 1 Press Z while Adjust/Maintenance > is displayed. 2 Press U or V repeatedly until >Registration Details > appears. 3 Press Z . 4 Press U or V repeatedly until >>M 12345 3 appears. 5 Press [OK] . 00000 or 0[...]

Using the Operation P an el 6-85 C 12345 3 (Cyan correct ion) and Y 12345 3 (Y ellow correction) These options make detailed correc tions to the registration for cyan (blue) and yellow . 10 After completing the settings for magenta in step 9 above, press the V key . >>C 12345 3 and >>Y 12345 3 are displayed. As with magenta, note down t[...]

6-86 Using the Operation Pan e l Service (for maintenance) The options available in Service are as follows: • Print S tatus Page (Printing the service status p age) • Print Network S tatus Page (Printing the network status p age) • Print T est Page • Maintenance (New Maintenance Kit replacement confirmation setting) • DEV -CLN (Developer/[...]

Using the Operation P an el 6-87 Print T est Page The test page is printed to check the ef fectiveness of printer adjustments. This is primarily used for maintenance by service personnel, but it contains information that may also be useful to you. 1 Press Z while >Service > is displayed. 2 Press U or V repeatedly until >>Print Test Page[...]

6-88 Using the Operation Pan e l LSU/Charger (LSU/Main charger cleaning mode setting) This sets the cleaning mode fo r the LSU/Main charger . When the printing quality declines, cleaning the LSU/Main charger can restore the printing quality . This is primarily used for maintenance by service personnel. 1 Press Z while >Service > is displayed.[...]

Options 7-1 7O p t i o n s This chapter contain s explanations on the following topics: General Information 7-2 Exp ansion Memory Modules 7-3 General Description of Options 7-5 For availability of the o ptions, consult your service technician.[...]

7-2 Options General Information This printer has the following options available to satisfy your printing requirements. For instructions on installing individual options, refer to the documentation included with the option. Some options are explained in the following sections. Paper Feeder PF-500/ PF-510 (Only 2 stacked paper feeders can be used wi[...]

Options 7-3 Exp ansion Memory Modules The printer's main controller board has a memory slot into which you can plug in optional memory modules (dual in line memory modules). Y ou can increase the printer's memory up to 1280 MB by plugging in the optional memory modules. Exp ansion Memory Modules Y ou can select additional memory modules f[...]

7-4 Options Inst alling the Memory Modules IMPORT ANT Remove any USB memory th at is attached t o the printer's USB memory slot. 1 Power off the printer and unplug the printer power cord. 2 Unscrew two screws at the back of the main controller board. 3 Pull out the main controller board gently . 4 Remove the memory module from its p ackage. Al[...]

Options 7-5 General Description of Options Memory Card The printer is equipped with a slot for a memory card with the maximum size of 4 GB. A memory card is useful for storing fonts, macros, and overlays. Reading the Memory Card Once inserted in the printer ’s slot, the content s of the memory card can be read from the operation pane l or automat[...]

7-6 Options S tatement, Folio, Y oukei 2, Y oukei 4, 16K and Other (92 x 162 mm to 216 x 356 mm) Paper type : Plain, preprinted, labels, bond, recycled, rough, letterhead, color , prepunched, cardstock, envelope, coated, thick, high quality , custom 1 (to 8) IMPORT ANT Please make sure that the machine is stab le, by placing the paper fee ders on a[...]

Options 7-7 USB Memory USB memory is a type of simple, highly portable flash memory that plugs into the USB memory slot. Files stor ed in USB memory can be printed by plugging the USB memory into the printer and then specifying the d es ired file names from the operation panel. The operation panel displays the names of PDF , TIFF , JPEG and XPS fil[...]

7-8 Options[...]

Computer Interface 8-1 8 Computer Interface This chapter contain s explanations on the following topics: Interface 8-2 USB Interface 8-2 Network Interface 8-3[...]

8-2 Computer Interface Interface This chapter explains the signals used in the printer's USB, and network interfaces. It also lists pin assignments, signal functions, timings, connector specifications, and voltage levels. • USB Interface • Network Interface USB Interface This printer supports the Hi-S peed USB. USB (Universal Serial Bus) i[...]

Computer Interface 8-3 Network Interface Features Automatic IP Address Resolution This feature is compatible with the DHCP/DHCPv6 protocol and allows the printer to automatically receive IP addresses from the DHCP/DHCPv6 server . Management usin g Web Browsers HTTP pages are incorporated in to the interface, so that a web browser can be used to mon[...]

8-4 Computer Interface Operation Environment 10 to 35 °C (50 to 95 °F), 20-80 % RH (condensation-free) EMI Countermeasu res VCCI Class B, FCC Class B (U.S.), CE (Europe) IMPORT ANT When IPv6 funct ions are used , the devices use d on the network (routers, PCs, et c) must support IPv6.[...]

Specifications 9-1 9 Specifica tions Note S pecifications are subject to change without notice. Item Description FS-C5100DN FS-C5200DN FS-C5300DN Printing Method Electrophotographic four color (CMYK) printing using tandem (4) drum system Printing S peeds Cassette A4: 21 ppm, B5, A5, A6: 23 ppm *1 , Letter: 23 ppm, Legal: 17 ppm A4: 26 ppm, B5, A5, [...]

9-2 Specifications Paper Sizes Cassette A4, B5, A5, Folio, 8 1/2 × 14"(Legal), 8 1/2 × 1 1"(Letter), Oficio II, S tatement, Executive, ISO B5, A6, Envelope C5, 16K, and Custom Cassette (Optional Paper Feeder PF-500/ PF-510) Envelope Monarch, Envelope #10, Envelope #9, Envelope #6, Envelope DL, Envelope C5, A5, B5, ISO B5, A4, Executive,[...]

Specifications 9-3 Operating Noise †† During Printing LpA = 53 dB (A) During S tandby LpA = 36 dB (A) During Sleep Mode immeasurably low Dimensions (W x D x H) 345 × 518 × 455 mm 13-5/8 × 18-1/2 × 17-9/10" 345 × 518 × 480 mm 13-5/8 × 20-2/5 × 18-9/10" Weight Approx. 28 kg (61 lbs) Approx. 29 kg (64 lbs) Approx. 29.5 kg (65 lbs[...]

9-4 Specifications[...]

Glossary-1 Glossar y Additional memory An additional memory (optional) is used for increasing the memory capacity of this machin e. For DIMM that can be used in this machine, contact your service technician. AppleT alk AppleT alk offers file sharing and printer sharing and it also enables you to utilize application software that is on another compu[...]

Glossary-2 IP Address (Internet Protocol Address) The Internet Protocol address is a unique number that represents a specific computer in a network. The format of an IP Address is four numbers separated by dots, e.g. 192.168.1 10.171. Each number should be a decimal between 0 and 255. KPDL KPDL is Kyocera’s implement ation of the PostScript page [...]

Glossary-3 St atus p age This lists machine conditions, such as the machine’ s memory , the total number of prints and pap er source settings. Y ou can print the st atus page from the operation panel. Subnet Mask This is a 32-bit numerical value that defines which bits of the IP address specify the network address and which specify the host addre[...]

Glossary-4[...]

Index-1 Inde x A Additional memory ................. ...... ........................Glossary-1 Administrator ID ..................... ..................... 6-60, 6-68, 6-75 Change ............. .......................... ......................... ... 6-76 Administrator Password ............ ........... ... ... . 6-61, 6-69, 6-76 Change ............[...]

Index-2 Menu Selection System ......... ....................... ...................6-8 Message Disp lay Indicators ....... .............. .......................... ...................6-5 S tatus inform at ion ... ...................... ... ... ......................6-4 Message display for replacing toner containers ................ ...............[...]

Index-3 T Timer Auto error clear .................. ... ...................... ............ 6-57 Auto panel reset ................ ... ......................... ... ... ... 6-58 Auto sleep ............ ... ......................... ... ... ... .............. 6-59 Automatic form feed timeout . ................. ................. 6-55 Error clear tim[...]

Index-4[...]

A1 We recommend t h e use of our own brand supplie s. We will not be liab le for any damage caused by th e use of third party supplies in this machine.[...]

[...]

452+%9 Version 1.1 2008.10[...]