Dodge Caliber (2010) manuel d'utilisation

Caliber O W N E R ’ S M A N U A L 2 0 1 0 I n f o r m a t i o n P r o v i d e d b y :[...]

T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION ............................................................ 3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE .............................. 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ............................. 9 1 4 UNDERST ANDING YOUR INSTRUMENT P ANEL .................................. 1 [...]

I n f o r m a t i o n P r o v i d e d b y :[...]

INTRODUCTION CONTENTS 䡵 Introduction ........................... 4 䡵 How T o Use This Manual .................. 4 䡵 W arnings And Cautions ................... 6 䡵 V ehicle Identification Number .............. 6 䡵 V ehicle Modifications/Alterations ............ 7 1 I n f o r m a t i o n P r o v i d e d b y :[...]

INTRODUCTION Congratulations on selecting your new Chrysler Group LLC vehicle. Be assured that it r epresents pr ecision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. This Owner’s Manual has been prepared with the assis- tance of service and engineering specialists to acquaint you with t[...]

1 INTRODUCTION 5 I n f o r m a t i o n P r o v i d e d b y :[...]

W ARNINGS AND CAUTIONS This Owner’s Manual contains W ARNINGS against op- erating procedur es that could result in an accident or bodily injury . It also contains CAUTIONS against proce- dures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important information. Observe all W arnings and Cautions.[...]

VEHICLE MODIFICA TIONS/AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death. 1 INTRODUCTION 7 I n f o r m a t i o n P r o v i d e d b y :[...]

I n f o r m a t i o n P r o v i d e d b y :[...]

THINGS TO KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A W ord About Y our Keys ................. 1 2 ▫ Ignition Key Removal .................. 1 2 ▫ Locking Doors W ith A Key .............. 1 4 ▫ Key-In-Ignition Reminder ............... 1 4 䡵 Sentry Key 威 .......................... 1 4 ▫ Replacement Keys ..................... 1 5 ?[...]

▫ Sound Horn W ith Remote Key Lock ........ 2 1 ▫ Flash Lights W ith Remote Key Lock/Unlock . . 22 ▫ Using The Panic Alarm ................. 2 2 ▫ Programming Additional T ransmitters ...... 2 3 ▫ General Information ................... 2 3 ▫ T ransmitter Battery Replacement .......... 2 4 䡵 Remote Starting System — If Equipped ....[...]

▫ Seat Belt Pretensioners — If Equipped ...... 5 0 ▫ Energy Management Feature ............. 5 0 ▫ Supplemental Active Head Restraints (AHR) . . 51 ▫ Enhanced Seat Belt Use Reminder System (BeltAlert 威 ) ......................... 5 5 ▫ Seat Belt Extender ..................... 5 6 ▫ Seat Belts And Pregnant W omen .......... 5 6 ▫ S[...]

A WORD ABOUT YOUR KEYS The authorized dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys. Ask your authorized dealer for these numbers and keep them in a safe place. Ignition Key Removal 1. Place the shift lever in P ARK (if equipped with an automatic transmission[...]

NOTE: If you try to remove the key befor e you place the shift lever in P ARK, the key may become trapped tem- porarily in the ignition switch cylinder . If this occurs, rotate the key to the right slightly , then r emove the key as described. If a malfunction occurs, the system will trap the key in the ignition cylinder to warn you that this safet[...]

CAUTION! An unlocked car is an invitation to thieves. Always remove the key from the ignition and lock all the doors when leaving the vehicle unattended. Locking Doors With A Key Y ou can insert the key with either side up. T o lock the door , turn the key to the right. T o unlock the door , turn the key to the left. Refer to “Maintenance Procedu[...]

seconds for a bulb check. If the light remains on after the bulb check, it indicates that there is a problem with the electronics. In addition, if the V ehicle Security Light begins to flash after the bulb check, it indicates that someone used an invalid key to try to start the engine. Either of these conditions will result in the engine being shut[...]

dealer or by following the customer key programming procedur e. This procedur e consists of programming a blank key to the vehicle electronics. A blank key is one that has never been programmed. NOTE: When having the Sentry Key 威 Immobilizer System serviced, bring all vehicle keys with you to an authorized dealer . Customer Key Programming If you[...]

The new Sentry Key 威 is programmed. The Remote Keyless Entry (RKE) transmitter will also be pro- grammed during this procedure. Repeat this pr ocedure to program up to eight keys. If you do not have a programmed Sentry Key 威 , contact your authorized dealer for details. NOTE: If a pr ogrammed key is lost, see your authorized dealer to have all [...]

T o Set The Security Alarm 1. Remove the key from the ignition switch and get out of the vehicle. 2. Lock the door using either the power door LOCK switch or the Remote Keyless Entry (RKE) transmitter and close all doors. 3. The V ehicle Security Light in the instrument cluster will flash rapidly for approximately 16 seconds. This shows that the V [...]

NOTE: The line of transmission must not be blocked with metal objects. T o Unlock The Doors And Liftgate Press and release the UNLOCK button on the RKE transmitter once to unlock the driver ’s door , or twice within five seconds to unlock all doors and liftgate. The turn signal lights will flash to acknowledge the unlock signal. The illuminated e[...]

• For vehicles not equipped with the EVIC, perform the following steps: 1. Press and hold the LOCK button on a programmed RKE transmitter for at least 4 seconds, but no longer than 10 seconds. Then, press and hold the UNLOCK button while still holding the LOCK button. 2. Release both buttons at the same time. 3. T est the feature while outside of[...]

T o Lock The Doors And Liftgate Press and release the LOCK button on the RKE transmit- ter to lock all doors and liftgate. The turn signal lights will flash and the horn will chirp to acknowledge the signal. Sound Horn With Remote Key Lock This feature will cause the horn to chirp when the doors are locked with the RKE transmitter . This feature ca[...]

Flash Lights With Remote Key Lock/Unlock This feature will cause the turn signal lights to flash when the doors are locked or unlocked with the RKE transmit- ter . This featur e can be turned on or turned off. T o change the current setting, proceed as follows: • For vehicles equipped with the EVIC, refer to “Elec- tronic V ehicle Information C[...]

The Panic Alarm will stay on for three minutes unless you turn it off by pressing the P ANIC button a second time or if the vehicle speed is 5 mph (8 km/h) or greater . NOTE: When you turn off the Panic Alarm by pressing the P ANIC button a second time, you may have to be closer to the vehicle due to the radio frequency noises of the system. Progra[...]

T ransmitter Battery Replacement NOTE: Perchlorate Material – special handling may apply . See “www .dtsc.ca.gov/hazardouswaste/per chlorate.” The recommended replacement battery is CR2032. 1. If the RKE transmitter is equipped with a screw , remove the screw . W ith the RKE transmitter buttons facing down, use a flat blade to pry the two hal[...]

REMOTE ST ARTING SYSTEM — IF EQUIPPED This system uses the Remote Keyless Entry (RKE) transmitter to start the engine conve- niently from outside the vehicle while still maintaining security . The system has a range of approximately 300 ft (91 m). NOTE: The vehicle must be equipped with an auto- matic transmission to be equipped with Remote Start[...]

T o Enter Remote Start Press and release the REMOTE ST ART button on the RKE transmitter twice, within five sec- onds. The parking lights will flash and the horn will chirp twice (if programmed). Then, the engine will start and the vehicle will remain in the Remote Start mode for a 15-minute cycle. NOTE: • The park lamps will turn on and remain o[...]

T o Exit Remote Start Mode and Drive the V ehicle Before the end of the 15-minute cycle, press and release the UNLOCK button on the RKE transmitter to unlock the doors and disarm the V ehicle Security Alarm (if equipped). Then, insert the key into the ignition switch and turn the switch to the ON position. NOTE: The ignition switch must be in the O[...]

W ARNING! • Do not leave children or animals inside parked vehicles in hot weather . Interior heat build-up may cause serious injury or death. • For personal security and safety in the event of an accident, lock the vehicle doors as you drive as well as when you park and leave the vehicle. • When leaving the vehicle, always remove the key fro[...]

Automatic Door Locks — If Equipped The doors will lock automatically on vehicles with power door locks if all of the following conditions are met: 1. The Auto Lock feature is enabled. 2. The transmission is in gear . 3. All doors are closed. 4. The throttle is pressed. 5. The vehicle speed is above 15 mph (24 km/h). 6. The doors were not previous[...]

• For vehicles not equipped with the EVIC, perform the following procedure: 1. Close all doors and place the key in the ignition switch. 2. W ithin 15 seconds, cycle the ignition switch between LOCK and ON and then back to LOCK four times ending up in the LOCK position (do not start the engine). 3. W ithin 30 seconds, pr ess the power door LOCK s[...]

Automatic Unlock Doors on Exit Programming The Automatic Unlock Doors On Exit feature can be enabled or disabled as follows: • For vehicles equipped with the EVIC, refer to “Elec- tronic V ehicle Information Center (EVIC)/Personal Settings (Customer-Programmable Features)” in “Un- derstanding Y our Instrument Panel” for further infor- mat[...]

T o engage or disengage the Child-Protection Door Lock system 1. Open the rear door . 2. Insert the tip of the ignition key into the lock and rotate to the LOCK or UNLOCK position. 3. Repeat steps 1 and 2 for the opposite rear door . Child-Protection Door Lock Location 32 THINGS TO KNOW BEFORE ST ARTING YOUR VEHICLE I n f o r m a t i o n P r o v i [...]

W ARNING! A void trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the child protection locks are engaged. NOTE: For emergency exit with the system engaged, move the lock plunger up (unlocked position), r oll down the window and open the door with the outside door handle. POWER WINDOW[...]

• For vehicles equipped with the EVIC, the power window switches will remain active for up to 10 min- utes after the ignition switch is turned to the LOCK position. Opening either front door will cancel this feature. The time for this feature is programmable. Refer to “Electronic V ehicle Information Center (EVIC)/Personal Settings (Customer-Pr[...]

Window Lockout Switch The window lockout switch on the driver’s door allows you to disable the window control on the other doors. T o disable the window contr ols on the other doors, press the window LOCKOUT switch. T o enable the window con- trols, press the window LOCKOUT switch a second time. LIFTGA TE NOTE: The key that is used to start your [...]

Once unlocked, the liftgate can be opened or closed without using the key . T o open the liftgate, squeeze the liftgate release and pull the liftgate open with one fluid motion. NOTE: • In the event of a power malfunction, or the RKE transmitter is inoperative, insert the key into the liftgate lock cylinder and turn it to the right (manual lock m[...]

W ARNING! (Continued) • If you are required to drive with the liftgate open, make sure that all windows are closed, and the climate control blower switch is set at high speed. DO NOT use the recirculation mode. Gas props support the liftgate in the open position. However , because the gas pressur e drops with tempera- ture, it may be necessary to[...]

seat belt webbing into position by extending the belt all the way out and then adjusting the belt to the desired length to restrain a child seat or secure a large item in a seat — if equipped If you will be carrying children too small for adult-sized seat belts, the seat belts or the Lower Anchors and T ether for CHildren (LA TCH) feature also ca[...]

ejection and the risk of injury caused by striking the inside of the vehicle. Everyone in a motor vehicle should be belted at all times. Lap/Shoulder Belts All the seating positions in your vehicle are equipped with combination lap/shoulder belts. The belt webbing retractor is designed to lock during very sudden stops or collisions. This feature al[...]

W ARNING! (Continued) • W earing your belt in the wrong place could make your injuries in a collision much worse. Y ou might suffer internal injuries, or you could even slide out of part of the belt. Follow these instructions to wear your seat belt safely and to keep your pas- sengers safe, too. • T wo people should never be belted into a singl[...]

3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt[...]

W ARNING! (Continued) • A belt that is worn under your arm is dangerous. Y our body could strike the inside surfaces of the vehicle in a collision, increasing head and neck injury . A belt worn under the arm can cause internal injuries. Ribs aren’t as strong as shoulder bones. W ear the belt over your shoulder so that your strongest bones will [...]

W ARNING! • A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as possible and keep it snug. • A twisted belt can’t do its job properly . In a collision, it could even cut into you. Be sure the[...]

Adjustable Upper Shoulder Belt Anchorage In the driver and front passenger seat, the shoulder belt can be adjusted upwar d or downward to position the belt away from your neck. Push the anchorage button to release the anchorage, and move it up or down to the position that fits you best. NOTE: The adjustable upper shoulder belt anchorage is equipped[...]

Lap/ Shoulder Belt Operating Instructions With A Mini-Latch And Buckle A three point seatbelt with a mini-latch and buckle, allows the shoulder belt to detach from the lower anchor when the seat is folded. The mini-buckle and shoulder belt can then be stored out of the way in the right side trim panel for added convenience. 1. Remove the mini-latch[...]

2. Grasp the mini-latch plate and pull the belt over the seat. 3. Route the shoulder belt to the inside of the right head restraint. 4. When the belt is long enough to fit, insert the mini- latch plate into the mini-buckle until you hear a “click.” 5. Sit back in seat. Slide the regular latch plate up the webbing as far as necessary to allow th[...]

7. Position the lap belt across your thighs, below your abdomen. T o remove slack in the lap belt portion, pull up on the shoulder belt. T o loosen the lap belt if it is too tight, pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision. 8. Position the shoulder belt on your chest so that it is comfortable and no[...]

10. T o disengage the mini-latch from the mini-buckle for storage, insert the regular latch plate into the black button on the top of the mini-buckle. The belt will automatically retract to its stowed position. If necessary , slide the latch plate down the webbing to allow the belt to retract fully . Insert the mini-latch plate into the slot provid[...]

When T o Engage The Automatic Locking Mode Use the Automatic Locking Mode anytime a child safety seat is installed in a seating position that has a belt with this feature. Children 12 years old and under should always be properly restrained in the rear seat. How T o Engage The Automatic Locking Mode 1. Buckle the combination lap and shoulder belt. [...]

to retract completely in this case and then carefully pull out only the amount of webbing necessary to comfort- ably wrap around the occupants mid-section. Slide the latch plate into the buckle until you hear a ⬙ click. ⬙ Seat Belt Pretensioners — If Equipped The seat belts for both fr ont seating positions may be equipped with pretensioning [...]

W ARNING! • The belt and retractor assembly must be replaced if the seat belt assembly Automatic Locking Re- tractor (ALR) feature or any other seat belt func- tion is not working properly when checked ac- cording to the procedures in the Service Manual. • Failure to replace the belt and retractor assembly could increase the risk of injury in c[...]

CAUTION! All occupants, including the driver , should not oper- ate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a collision. NOTE: For more information on pr operly adjusting and positioning the head restraint, refer to “Adjustin[...]

1. Grasp the deployed AHR from the rear seat. 2. Position the hands on the top of the deployed AHR at a comfortable position. 3. Pull down then rearward towards the rear of the vehicle then down to engage the locking mechanism. Hand Positioning Points On AHR 1 — Downward Movement 2 — Rearward Movement 2 THINGS TO KNOW BEFORE ST ARTING YOUR VEHI[...]

4. The AHR front soft foam and trim half should lock into the back decorative plastic half. NOTE: • If you have difficulties or problems resetting the Active Head Restraints, see an authorized dealer . • For safety reasons, have the Active Head Restraints checked by a qualified specialist at an authorized dealer . 3 — Final Downward Movement [...]

Enhanced Seat Belt Use Reminder System (BeltAlert 姞 ) If the driver’s seat belt has not been buckled within 60 seconds of starting the vehicle and if the vehicle speed is greater than 5 mph (8 km/h), the BeltAlert 威 will alert the driver to buckle the seat belt. The driver should also instruct all other occupants to buckle their seat belts. O[...]

BeltAlert 威 can be r eactivated by repeating this pr ocedure. NOTE: Although BeltAlert 威 has been deactivated, the Seat Belt Reminder Light will continue to illuminate while the driver’s seat belt remains unbuckled. Seat Belt Extender If a seat belt is too short, even when fully extended, and when the adjustable upper shoulder belt anchorage [...]

Supplemental Restraint System (SRS) — Airbags This vehicle has Advanced Front Airbags for both the driver and front passenger as a supplement to the seat belt restraint systems. The driver’s Advanced Front Air- bag is mounted in the center of the steering wheel. The passenger’s Advanced Front Airbag is mounted in the instrument panel, above t[...]

The Advanced Front Airbags have a multistage inflator design. This allows the airbag to have different rates of inflation that are based on the severity and type of collision. This vehicle may be equipped with driver and/or front passenger seat track position sensors that may adjust the inflation rate of the Advanced Front Airbags based upon seat p[...]

• Instrument Panel • Knee Impact Bolster • Driver Advanced Front Airbag • Passenger Advanced Front Airbag • Supplemental Seat-Mounted Side Airbags (SAB) • Supplemental Side Airbag Inflatable Curtains (SABIC) • Front and Side Impact Sensors • Front Seat Belt Pretensioners, Seat Belt Buckle Switch, and Seat T rack Position Sensors •[...]

W ARNING! (Continued) • Do not put anything on or around the airbag covers or attempt to open them manually . Y ou may damage the airbags and you could be injured because the airbags may no longer be functional. The protective covers for the airbag cushions are designed to open only when the airbags are inflat- ing. • Do not drill, cut or tampe[...]

deploys independently , that is a left side impact deploys the left airbag only and a right-side impact deploys only the right airbag. Supplemental Side Airbag Inflatable Curtain (SABIC) SABIC airbags may of fer side-impact and vehicle rollover protection to front and rear seat outboard occupants in addition to that provided by the body structure. [...]

The system includes side impact sensors adjacent to both front and r ear seat occupants that ar e calibrated to deploy the SABIC airbags during impacts that requir e airbag occupant protection. W ARNING! • If your vehicle is equipped with left and right Supplemental Side Airbag Inflatable Curtain (SABIC), do not stack luggage or other cargo up hi[...]

Here are some simple steps you can take to minimize the risk of harm from a deploying airbag: 1. Children 12 years old and under should always ride buckled up in a rear seat. W ARNING! Infants in rear facing child restraints should NEVER ride in the front seat of a vehicle with a passenger Advanced Front Airbag. An airbag deployment can cause sever[...]

4. Do not lean against the door or window . If your vehicle has side airbags, and deployment occurs, the side airbags will inflate forcefully into the space be- tween you and the door . 5. If the airbag system in this vehicle needs to be modified to accommodate a disabled person, contact the Customer Center . Phone numbers are provided under ⴖ If[...]

ORC deploys the Advanced Front Airbags, Supplemental Driver Side Knee Airbag, SABIC airbags, Supplemental Seat-Mounted Side Airbags — if equipped, and fr ont seat belt pretensioners — if equipped, as required, depending on the severity and type of impact. Advanced Front Airbags and knee airbag are designed to provide additional protection by su[...]

in the ACC position, or not in the ignition, the airbag system is not on and the airbags will not inflate. The ORC contains a backup power supply system that may deploy the airbags even if the battery loses power or it becomes disconnected prior to deployment. Also, the ORC turns on the Airbag W arning Light in the instrument panel for approxi- mat[...]

separate and fold out of the way as the airbags inflate to their full size. The airbags fully inflate in about 50 to 70 milliseconds. This is about half of the time it takes to blink your eyes. The airbags then quickly deflate while helping to restrain the driver and front passenger . The Advanced Front Airbag gas is vented through the vent holes i[...]

Supplemental Side Airbag Inflatable Curtain (SABIC) Inflator Units During collisions where the impact is confined to a particular area of the side of the vehicle, the ORC may deploy the SABIC airbags, depending on the severity and type of collision. In these events, the ORC will deploy the SABIC only on the impact side of the vehicle. A quantity of[...]

• Flash hazard lights as long as the battery has power or until the ignition key is turned off. • T urn on the interior lights, which remain on as long as the battery has power or until the ignition key is removed. • Unlock the doors automatically . If a Deployment Occurs The front airbags are designed to deflate immediately after deployment.[...]

Do not drive your vehicle after the airbags have de- ployed. If you are involved in another collision, the airbags will not be in place to protect you. W ARNING! Deployed airbags and seat belt pretensioners cannot protect you in another collision. Have the airbags, seat belt pretensioners, and the front passenger seat belt retractor assembly replac[...]

W ARNING! (Continued) • Do not attempt to modify any part of your ad- vanced airbag system. The airbag may inflate accidentally or may not function properly if modi- fications are made. T ake your vehicle to an autho- rized dealer for any advanced airbag system ser- vice. If your seat including your trim cover and cushion needs to be serviced in [...]

NOTE: If the speedometer , tachometer , or any engine related gauges are not working, the Occupant Restraint Controller (ORC) may also be disabled. The airbags may not be ready to inflate for your protection. Promptly check the fuse block for blown fuses. Refer to the label located on the inside of the fuse block cover for the proper airbag fuses. [...]

In the event that an investigation is undertaken by Chrysler Group LLC (regar dless of initiative), the com- pany or its designated representative will first obtain permission of the appropriate custodial entity for the vehicle (usually the vehicle owner or lessee) before accessing the electronic data stored, unless order ed to image the data by a [...]

• Pedal position • And other parameters depending on vehicle configuration Child Restraints Everyone in your vehicle needs to be buckled up at all times, including babies and children. Every state in the United States and all Canadian provinces requir e that small childr en ride in proper restraint systems. This is the law , and you can be pros[...]

Infants and Child Restraints • Safety experts r ecommend that children ride rearwar d-facing in the vehicle until they are at least one year old and weigh at least 20 lbs (9 kg). T wo types of child restraints can be used rearward-facing infant carriers and convertible child seats. Both types of child restraints are held in the vehicle by the lap[...]

• Make sure that the child is upright in the seat. • The lap portion should be low on the hips and as snug as possible. • Check belt fit periodically . A child’s squirming or slouching can move the belt out of position. • If the shoulder belt contacts the face or neck, move the child closer to the center of the vehicle. Never allow a chil[...]

are older than one year . These child seats are also held in the vehicle by the lap/shoulder belt or the LA TCH child restraint anchorage system. Refer to ⬙ LA TCH — Child Seat Anchorage System (Lower Anchors and T ether for CHildren) ⬙ . • The belt-positioning booster seat is for childr en weigh- ing mor e than 40 lbs (18 kg), but who are [...]

LA TCH — Child Seat Anchorage System (Lower Anchors and T ether for CHildren) W ARNING! Child restraint anchorages are designed to withstand only those loads imposed by correctly-fitted child restraints. Under no circumstances are they to be used for adult seat belts, harnesses, or for attaching other items or equipment to the vehicle. Y our vehi[...]

Child seats with fixed lower attachments must be in- stalled in the outboard positions only . If you are installing LA TCH-compatible child restraints in adjacent rear seat- ing positions, you can use the LA TCH anchors or the vehicle’s seat belt for the outboar d position, but you must use the vehicle’s seat belt at the center position. If you[...]

Installing the LA TCH – Compatible child Restraint System W e urge you to carefully follow the directions of the manufacturer when installing your child restraint. Not all child r estraint systems will be installed as described her e. Again, carefully follow the installation instructions that are provided with the child restraint system. The lowe[...]

First loosen the adjusters on the lower straps and on the tether strap so that you can mor e easily attach the hook or connectors to the vehicle anchorages. Next, attach the lower hooks or connectors over the top of the seat cover material. Then attach the tether strap to the anchorage directly behind the seat where you are placing the child restra[...]

Installing Child Restraints Using the V ehicle Seat Belt The seat belts in the passenger seating positions are equipped with an Automatic Locking Retractor (ALR) to secure a Child Restraint System (CRS). These types of seat belts are designed to keep the lap portion of the seat belt tight around the child restraint so that it is not necessary to us[...]

2. Finally , pull on any excess webbing to tighten the lap portion around the child restraint. Any seat belt system will loosen with time, so check the belt occasionally , and pull it tight if necessary . • In the rear seat, you may have trouble tightening the lap/shoulder belt on the child restraint because the buckle or latch plate is too close[...]

• Attach the tether strap hook of the child r estraint to the tether anchor and remove slack in the tether strap according to the child r estraint manufacturer ’s instructions. NOTE: Ensure that the tether strap does not slip into the opening between the seatbacks as you remove slack in the strap. W ARNING! An incorrectly anchored tether strap [...]

The engine oil installed in the engine at the factory is a high-quality energy conserving type lubricant. Oil changes should be consistent with anticipated climate conditions under which vehicle operations will occur . For the recommended viscosity and quality grades refer to “Maintenance Procedur es” in “Maintaining Y our V e- hicle”. NON-[...]

Exhaust Gas W ARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. T o avoid breathing (CO) follow these safety tips: Do not run the engine in a closed garage or in confined areas any longer than needed to move your vehicle [...]

Safety Checks Y ou Should Make Inside the V ehicle Seat Belts Inspect the belt system periodically , checking for cuts, frays, and loose parts. Damaged parts must be replaced immediately . Do not disassemble or modify the system. Front seat belt assemblies must be replaced after a collision. Rear seat belt assemblies must be replaced after a collis[...]

W ARNING! Pedals that cannot move freely can cause loss of vehicle control and increase the risk of serious per- sonal injury . • Always make sure that floor mats are properly attached to the floor mat fasteners. • Never place or install floor mats or other floor coverings in the vehicle that cannot be properly secured to prevent them from movi[...]

Periodic Safety Checks Y ou Should Make Outside the V ehicle T ires Examine tires for excessive tread wear and uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread. Inspect the tread and sidewall for cuts and cracks. Check the wheel nuts for tightness. Check the tires (including spare) for proper pressure. Ligh[...]

I n f o r m a t i o n P r o v i d e d b y :[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors .............................. 9 5 ▫ Inside Day/Night Mirror ................ 9 5 ▫ Automatic Dimming Mirror — If Equipped . . . 95 ▫ Outside Mirror — Driver Side ............ 9 6 ▫ Outside Mirror — Passenger Side .......... 9 6 ▫ Power Mirrors — If Equipped .......[...]

▫ Commands ........................ 1 2 9 ▫ V oice T raining ...................... 1 3 2 䡵 Seats .............................. 1 3 2 ▫ Manual Front Seat Adjustment ........... 1 3 3 ▫ Manual Seat Height Adjustment — If Equipped .......................... 1 3 4 ▫ Manual Lumbar — If Equipped .......... 1 3 4 ▫ Driver’s Seatback [...]

▫ Intermittent W iper System .............. 1 5 2 ▫ W indshield W ashers .................. 1 5 2 ▫ Mist Feature ........................ 1 5 3 䡵 T ilt Steering Column ................... 1 5 4 䡵 Electronic Speed Control — If Equipped ..... 1 5 5 ▫ T o Activate ......................... 1 5 5 ▫ T o Set a Desired Speed ..............[...]

▫ W ind Buffeting ...................... 1 6 7 ▫ Sunroof Maintenance ................. 1 6 7 ▫ Ignition Off Operation ................. 1 6 8 䡵 Electrical Power Outlets ................. 1 6 8 䡵 Power Inverter — If Equipped ............ 1 7 0 䡵 Cupholders .......................... 1 7 2 䡵 Storage ............................. 1 7 3[...]

MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical mirror adjustment. Adjust the mirror to center on the view through the rear window . Headlight glare can be r educed by moving the small control under the mirr or to the night position (toward the rear of vehicle). The mirror should be adjusted while set in [...]

CAUTION! T o avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror . Apply the solution onto a clean cloth and wipe the mirror clean. Outside Mirror — Driver Side Adjust the flat outside mirror so you can just see the side of your vehicle in the part of the mirror closest to the vehicle with your h[...]

Power Mirrors — If Equipped The control for the power mirrors is located on the driver’s door trim panel. T o adjust a mirror , turn the control wand toward the left or right mirror positions indicated. T ilt the control wand in the direction you want the mirror to move. When finished adjusting the mirror , turn the control to the center positi[...]

W ARNING! V ehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side mirror could cause you to collide with another vehicle or other object. Use your inside mirror when judging the size or distance of a vehicle seen in this convex mirror . Hea[...]

Uconnect™ Phone — IF EQUIPPED Uconnect™ Phone is a voice-activated, hands-free, in- vehicle communications system. Uconnect™ Phone al- lows you to dial a phone number with your cellular phone using simple voice commands (e.g., ⬙ Call” ѧ “Mike” ѧ ”W ork ⬙ or ⬙ Dial” ѧ “248-555-1212 ⬙ ). Y our cellular phone’s audio i[...]

system. Only one linked (or paired) cellular phone can be used with the system at a time. The system is available in English, Spanish, or French languages. W ARNING! Any voice commanded system should be used only in safe driving conditions following local laws and phone use. All attention should be kept on the roadway ahead. Failure to do so may re[...]

The radio display will be used for visual prompts from the Uconnect™ Phone such as ⬙ CELL ⬙ or caller ID on certain radios. Operation V oice commands can be used to operate the Uconnect™ Phone and to navigate through the Uconnect™ Phone menu structure. V oice commands are requir ed after most Uconnect™ Phone prompts. Y ou will be prompt[...]

T o activate the Uconnect™ Phone from idle, simply pr ess the button and follow the audible prompts for directions. All Uconnect™ Phone sessions begin with a press of the button on the radio control head. Cancel Command At any prompt, after the beep, you can say ⬙ Cancel ⬙ and you will be returned to the main menu. However , in a few instan[...]

• Y ou will then be asked to give your cellular phone a priority level between one and seven, with one being the highest priority . Y ou can pair up to seven cellular phones to your Uconnect™ Phone. However , at any given time, only one cellular phone can be in use, connected to your Uconnect™ Phone. The priority allows the Uconnect™ Phone [...]

or downloaded phonebook. T o learn how to store a name in the phonebook, refer to ⬙ Add Names to Y our Uconnect™ Phonebook, ⬙ in the phonebook. • The Uconnect™ system will confirm the name and then dial the corresponding phone number , which may appear in the display of certain radios. Add Names to Y our Uconnect™ Phonebook NOTE: Adding[...]

Phonebook Download – Automatic Phonebook T ransfer From Cellular Phone If equipped and specifically supported by your phone, Uconnect™ Phone automatically downloads names (text names) and number entries from the cellular phone’s phonebook. Specific Bluetooth 威 Phones with Phone Book Access Profile may support this feature. See Uconnect™ w[...]

Phonebook Download — Single Entry If equipped and supported by your phone, Uconnect™ Phone allows the user to download entries from their phone via Bluetooth 威 . T o use this feature, press the button and say “Phonebook Download.” The system prompts, “Ready to accept “V” card entry via Bluetooth 威 …” The system is now ready to[...]

• Y ou will then be asked for the name of the phonebook entry that you wish to edit. • Next, choose the number designation (home, work, cellular , or pager) that you wish to edit. • When prompted, recite the new phone number for the phonebook entry that you are editing. After you are finished editing an entry in the phonebook, you will be giv[...]

• After you enter the name, the Uconnect™ Phone will ask you which designation you wish to delete: home, work, cellular , pager , or all. Say the designation you wish to delete. • Note that only the phonebook entry in the current language is deleted. • Automatic downloaded phonebook entries cannot be deleted or edited. Delete/Erase “All?[...]

• The Uconnect™ Phone will then prompt you as to the number designation you wish to call. • The selected number will be dialed. Phone Call Features The following features can be accessed through the Uconnect™ Phone if the feature(s) are available on your cellular service plan. For example, if your cellular service plan provides three-way ca[...]

Making a Second Call While Current Call is in Progress T o make a second call while you are currently on a call, press the button and say ⬙ Dial ⬙ or ⬙ Call ⬙ followed by the phone number or phonebook entry you wish to call. The first call will be on hold while the second call is in progr ess. T o go back to the first call, refer to ⬙ T o[...]

Call T ermination T o end a call in progress, momentarily press the button. Only the active call(s) will be terminated and if there is a call on hold, it will become the new active call. If the active call is terminated by the phone far end, a call on hold may not become active automatically . This is cell phone-dependent. T o bring the call back f[...]

Uconnect™ Phone Features Language Selection T o change the language that the Uconnect™ Phone is using: • Press the button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say the name of the language you wish to switch to English, Espanol, or Francais. • Continue to follow the system prompts to complete the language sele[...]

Canada and 060 for Mexico). The number dialed may not be applicable with the available cellular service and area. • If supported, this number may be programmable on some systems. T o do this, press the button and say ‘Setup’, followed by ‘Emergency’. • The Uconnect™ Phone does slightly lower your chances of successfully making a phone[...]

Paging T o learn how to page, refer to ⬙ W orking with Automated Systems. ⬙ Paging works properly except for pagers of certain companies, which time out a little too soon to work properly with the Uconnect™ Phone. V oice Mail Calling T o learn how to access your voice mail, refer to ⬙ W orking with Automated Systems. ⬙ W orking with Autom[...]

The Uconnect™ Phone will then send the corresponding phone number associated with the phonebook entry , as tones over the phone. NOTE: • Y ou may not hear all of the tones due to cellular phone network configurations. This is normal. • Some paging and voice mail systems have system time out settings that are too short and may not allow the us[...]

Dialing Using the Cellular Phone Keypad Y ou can dial a phone number with your cellular phone keypad and still use the Uconnect™ Phone (while dialing via the cellular phone keypad, the user must exercise caution and take precautionary safety measures). By dialing a number with your paired Bluetooth 威 cellular phone, the audio will be played thr[...]

from your Uconnect™ Phone paired cellular phone to the Uconnect™ Phone or vice versa, press the button and say ⬙ T ransfer Call. ⬙ Connect or Disconnect Link Between the Uconnect™ Phone and Cellular Phone Y our cellular phone can be paired with many different electronic devices, but can only be actively ⬙ connected ⬙ with one electron[...]

• The selected phone will be used for the next phone call. If the selected phone is not available, the Uconnect™ Phone will return to using the highest priority phone present in or near (approximately within 30 ft (9 m)) the vehicle. Delete Uconnect™ Phone Paired Cellular Phones • Press the button to begin. • After the ⬙ Ready ⬙ promp[...]

Repeat the words and phrases when prompted by the Uconnect™ Phone. For best results, the V oice T raining session should be completed when the vehicle is parked with the engine running, all windows closed, and the blower fan switched off. This procedur e may be repeated with a new user . The system will adapt to the last trained voice only . T o [...]

• When navigating through an automated system such as voice mail, or when sending a page, at the end of speaking the digit string, make sure to say ⬙ Send. ⬙ • Storing names in the phonebook when the vehicle is not in motion is recommended. • It is not r ecommended to store similar sounding names in the Uconnect™ Phonebook. • Phoneboo[...]

• Performance, such as audio clarity , echo, and loudness to a large degree rely on the phone and network, and not the Uconnect™ Phone. • Echo at the phone far end can sometimes be reduced by lowering the in-vehicle audio volume. • In a convertible vehicle, system performance may be compromised with the convertible top down. Bluetooth 威 C[...]

122 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :[...]

3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 123 I n f o r m a t i o n P r o v i d e d b y :[...]

124 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :[...]

V oice Commands Primary Alternate(s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all V oice Commands Primary Alternate(s) call cancel confirmation prompts continue delete dial download edit emergency English erase all Espanol Francais help home 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 125 I n f o[...]

V oice Commands Primary Alternate(s) language list names list phones mobile mute mute off new entry no pager pair a phone phone pairing pairing phonebook phone book previous recor d again redial V oice Commands Primary Alternate(s) return to main menu r eturn or main menu select phone select send set up phone settings or phone set up towing assista[...]

General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. • This device may not cause harmful interfe[...]

NOTE: If you do not say a command within a few seconds, the system will present you with a list of options. If you ever wish to interrupt the system while it lists options, press the V oice Command button, listen for the beep, and say your command. Pressing the V oice Command button while the system is speaking is known as “barging in.” The sys[...]

Commands The V oice Command system understands two types of commands. Universal commands are available at all times. Local commands are available if the supported radio mode is active. Changing the V olume 1. Start a dialogue by pressing the V oice Command button. 2. Say a command (e.g., “Help”). 3. Use the ON/OFF VOLUME rotary knob to adjust t[...]

Radio FM T o switch to the FM band, say “FM” or “Radio FM”. In this mode, you may say the following commands: • “Frequency” (to change the frequency) • “Next Station” (to select the next station) • “Previous Station” (to select the previous station) • “Radio Menu” (to switch to the radio menu) • “Main Menu” (to[...]

Memo T o switch to the voice recorder mode, say “Memo”. In this mode, you may say the following commands: • “New Memo” (to record a new memo) — During the recor ding, you may press the V oice Command button to stop recor ding. Y ou pr oceed by saying one of the following commands: − “Save” (to save the memo) − “Continue” (to[...]

NOTE: Keep in mind that you have to press the V oice Command button first and wait for the beep before speaking the “Barge In” commands. V oice T raining For users experiencing difficulty with the system recog- nizing their voice commands or numbers the Uconnect™ V oice “V oice T raining” feature may be used. 1. Press the V oice Command b[...]

Manual Front Seat Adjustment The adjusting bar is at the front of the seats, near the floor . Pull the bar up to move the seat to the desired position. Using body pressure, move forward and rear- ward on the seat to be sure the seat adjusters have latched. W ARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of t[...]

Manual Seat Height Adjustment — If Equipped The driver’s seat height can be raised or lower ed by using the handle on the outboard side of the seat to adjust the driving position. Manual Lumbar — If Equipped The lumbar adjustment handle is located on the outboard side of the driver’s seat. T o increase or decrease support, rotate the handle[...]

Driver’s Seatback Recline T o recline: 1. Lean forward befor e lifting the handle, then lean back to the desired position and release the handle. 2. Lift the handle to return the seatback to an upright position. W ARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you c[...]

Six-W ay Power Seats — If Equipped The power seat switch is located on the outboard side of the seat near the floor . Use the switch to move the seat up, down, forward, rearward, or to tilt the seat. W ARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt [...]

Heated Seats — If Equipped This feature heats the front driver and passenger seats. The heaters provide the same heat level for both cushion and back. The controls for the front heated seats are located on the center instrument panel area. After turning the ignition ON, you can choose from High, Low , or Off heat settings. Amber indicator lights [...]

W ARNING! (Continued) • Do not place anything on the seat that insulates against heat, such as a blanket or cushion. This may cause the seat heater to overheat. Sitting in a seat that has been overheated could cause serious burns due to the increased surface temperature of the seat. CAUTION! Repeated overheating of the seat could damage the heati[...]

Adjusting Active Head Restraints Active Head Restraints can reduce the risk of injury in the event of a rear impact. The Active Head Restraint should be adjusted so the top of the head r estraint is located above the top of your ear . Front Passenger Seat Folded Flat Adjusted Head Restraint 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 139 I n f o[...]

T o raise the head restraint, pull upward on the head restraint (on some models, you may need to press the push button). T o lower the head restraint, press the push button, located at the base of the head r estraint, and push downward on the head restraint. For comfort the Active Head Restraints can be tilted forward and backward. T o tilt the hea[...]

NOTE: • The head restraints should only be removed by quali- fied technicians, for service purposes only . If either of the head restraints requir e removal, see your autho- rized dealer . • In the event of deployment of an Active Head Re- straint, refer to “Occupant Restraints/Resetting Active Head Restraints (AHR)” in “Things to Know Be[...]

W ARNING! (Continued) • Do not place items over the top of the Active Head Restraint, such as coats, seat covers or portable DVD players. These items may interfere with the operation of the Active Head Restraint in the event of an accident and could result in serious injury or death. • Active Head Restraints may be deployed if they are struck b[...]

Reclining Rear Seat — If Equipped For additional comfort, pull the strap forward just enough to release the seatback latch. Then push the seatback to a reclined position, approxi- mately 35 degrees maximum, and release the strap. Rear Seats Folded Flat Reclining Rear Seat Strap 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 143 I n f o r m a t i [...]

W ARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seri- ously injured or killed. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. • Be sure that everyone in your vehicle is in[...]

Lift the hood prop rod, clipped to the right side (left side when standing in front of hood) of the engine compart- ment, to secure the hood in the open position. Place the hood prop at the location stamped into the inner hood surface. CAUTION! T o prevent possible damage, do not slam the hood to close it. Lower the hood until it is open approxi- m[...]

LIGHTS Multifunction Lever The multifunction lever controls the operation of the headlights, parking lights, turn signals, headlight beam selection, instrument panel light dimming, interior lights, the passing lights and fog lights. The multifunction lever is located on the left side of the steering column. Headlights and Parking Lights T urn the e[...]

Lights-on Reminder If the headlights or parking lights ar e on after the ignition is turned OFF , a chime will sound to alert the driver when the driver’s door is opened. Fog Lights — If Equipped The front fog light switch is on the multifunction lever . T o activate the front fog lights, turn on the parking lights or the low beam headlights an[...]

T urn Signals Move the multifunction lever up or down and the arrows on each side of the instrument cluster flash to show proper operation of the front and rear turn signal lights. NOTE: If either light remains on and does not flash, or there is a very fast flash rate, check for a defective outside light bulb. If an indicator fails to light when th[...]

Instrument Panel Dimmer Rotate the center portion of the lever to the extreme bottom position to fully dim the instrument panel lights and prevent the interior lights from illuminating when a door is opened. Rotate the center portion of the lever up to increase the brightness of the instrument panel lights when the park- ing lights or headlights ar[...]

than the normal lamp operation. The high beam head- lights will come on as Daytime Running Lights (DRL), which is at a lower intensity than the normal high beams. The DRL’s will come on whenever the ignition is ON, the engine is running, the headlight switch is off, the parking brake is off, the turn signal is off, and the shift lever is in any p[...]

WINDSHIELD WIPERS AND W ASHERS The windshield wiper/washer control lever is located on the right side of the steering column. The front wipers are operated by r otating a switch, located on the end of the lever . For information on the rear wiper/washer , refer to “Rear W indow Fea- tures” in “Understanding the Features of Y our V ehicle”. [...]

Intermittent Wiper System Use the intermittent wiper when weather conditions make a single wiping cycle, with a variable pause be- tween cycles, desirable. Select the delay interval by turning the end of the lever . Rotate the end of the lever upward (clockwise) to decrease the delay time and downward (counter clockwise) to increase the delay time.[...]

Mist Feature Push down on the control lever to activate a single wipe to clear the windshield of road mist or spray from a passing vehicle. As long as the lever is held down, the wipers will continue to operate. CAUTION! In cold weather , always turn off the wiper switch and allow the wipers to return to the park position before turning off the eng[...]

TIL T STEERING COLUMN This feature allows you to tilt the steering column upward or downward. The tilt control lever is located on the left-side of the steering column, below the turn signal controls Push down on the lever to unlock the column. W ith one hand firmly on the steering wheel, move the steering column up or down as desired. Push the lev[...]

ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, Electronic Speed Control takes over the accelerator operation at speeds greater than 25 mph (40 km/h). The Electronic Speed Control lever is located on the right side of the steering wheel. NOTE: In order to ensure proper operation, the Elec- tronic Speed Control System has been designed to shu[...]

W ARNING! Leaving the Electronic Speed Control system on when not in use is dangerous. Y ou could accidentally set the system or cause it to go faster than you want. Y ou could lose control and have an accident. Always leave the Electronic Speed Control system off when you are not using it. T o Set a Desired Speed T urn the Electronic Speed Control[...]

RESUME ACCEL position, the set speed will continue to increase until the lever is r eleased, then the new set speed will be established. T apping RESUME ACCEL once will result i na1m p h (1.6 km/h) speed increase. Each time the Electronic Speed Control lever is tapped, speed increases, so that tapping the lever three times will increase speed by 3 [...]

T o Accelerate for Passing Press the accelerator as you would normally . When the pedal is released, the vehicle will return to the set speed. Using Electronic Speed Control On Hills NOTE: The Electronic Speed Control system maintains speed, up and down hills. A slight speed change on moderate hills is normal. On steep hills, a greater speed loss o[...]

NOTE: HomeLink 威 is disabled when the V ehicle Secu- rity Alarm is active. W ARNING! • Y our motorized door or gate will open and close while you are training the Universal T ransceiver . Do not train the transceiver if people, pets or other objects are in the path of the door or gate. Only use this transceiver with a garage door opener that ha[...]

Programming HomeLink 姞 Before Y ou Begin If you have not trained any of the HomeLink 威 buttons, erase all channels before you begin training. T o do this, press and hold the two outside buttons for 20 seconds until the red indicator flashes. It is recommended that a new battery be placed in the handheld transmitter of the device that is being c[...]

• After training a HomeLink 威 channel, if the garage door does not operate with HomeLink 威 and the ga- rage door opener was manufactured after 1995, the garage door opener may have a rolling code. If so, proceed to the heading “Pr ogramming A Rolling Code System.” 4. Press and hold the just-trained HomeLink 威 button and observe the indi[...]

6. Firmly press and release the LEARN or TRAINING button. The name and color of the button may vary by manufacturer . NOTE: Y ou have 30 seconds in which to initiate the next step after the LEARN button has been pressed. 7. Return to the vehicle and press the programmed HomeLink 威 button twice (holding the button for two seconds each time). If th[...]

If you unplugged the device for training, plug it back in at this time. Then proceed with Step 4 under “Programming HomeLink 威 ” earlier in this section. Using HomeLink 姞 T o operate, pr ess and r elease the pr ogrammed HomeLink 威 button. Activation will now occur for the trained device (i.e., garage door opener , gate operator , Security[...]

T roubleshooting Tips If you are having trouble programming HomeLink 威 , here are some of the most common solutions: • Replace the battery in the original transmitter . • Press the LEARN button on the Garage Door Opener to complete the training for a Rolling Code. • Did you unplug the device for training, and r emember to plug it back in? I[...]

POWER SUNROOF — IF EQUIPPED The power sunroof switch is located in the reading light. W ARNING! • Never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury o[...]

Opening the Sunroof Manual Mode T o open the sunroof, press and hold the switch rearward to full open. Any release of the switch will stop the movement and the sunroof will remain in a partial open condition until the switch is pushed and held rearwar d again. Express Mode Press the switch rearwar d and release, and the sunroof will open automatica[...]

Pinch Protect Override If a known obstruction (ice, debris, etc.) prevents closing, press the switch forward and hold for two seconds after the reversal occurs. This allows the sunroof to move towards the close position. NOTE: Pinch protection is disabled while the switch is pressed. V enting Sunroof — Express Press and hold the “V ent” butto[...]

Ignition Off Operation The sunroof will also operate up to 45 seconds after the ignition has been turned OFF . The sunr oof operation will be canceled if either of the front doors are opened during the 45 second time period. ELECTRICAL POWER OUTLETS There is a standard 12 V olt (13 Amp) power outlet located in the instrument panel for added conveni[...]

NOTE: • T o ensure proper operation, a MOP AR 威 knob and element must be used. • Do not exceed the maximum power of 160 W atts (13 Amps) at 12 V olts. If the 160 W att (13 Amp) power rating is exceeded the fuse protecting the system will need to be replaced. W ARNING! T o avoid serious injury or death: • Only devices designed for use in thi[...]

POWER INVERTER — IF EQUIPPED A 1 15 V olt (150 W att) AC power inverter is located on the rear of the center console for added convenience. This outlet can power cellular phones, electronics and other low power devices requiring power up to 150 W atts. Certain high-end video games, such as Playstation3 and XBox360 will exceed this power limit, as[...]

W ARNING! T o avoid serious injury or death: • Do not use a three-prong adaptor . • Do not insert any objects into the receptacles. • Do not touch with wet hands. • Close the lid when not in use. • If this outlet is mishandled, it may cause an electric shock and failure. CAUTION! • Many accessories that can be plugged in draw power from[...]

CUPHOLDERS Y our vehicle is equipped with four cupholders. There ar e two cupholders located in the front. There are two cupholders behind the center console for rear passengers. Front Cupholders Rear Cupholders 172 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :[...]

STORAGE Glove Compartment And Storage Bin The glove compartment storage bin is located on the passenger side of the instrument panel. Upper Instrument Panel Storage A storage compartment is located in the center of the instrument panel. Glove Compartment Storage Bin Upper Storage Compartment 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 173 I n f [...]

T o open the storage compartment, push down on the button. The lid will open automatically . Push down on the lid to close it. Door Storage — If Equipped The interior door panels are equipped with lower storage areas. Opened Storage Compartment Front Door Storage 174 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o r m a t i o n P r o v i d e[...]

CHILL ZONE 姞 BEVERAGE COOLER STORAGE COMP ARTMENT — IF EQUIPPED The glove compartment is located on the passenger side of the vehicle. The large glove compartment door swings downward and features two levels of storage. The upper bin functions as the Chill Zone 威 cooled beverage storage compartment (for vehicles equipped with air condition- i[...]

Chill Zone 威 compartment. Depending on ambient tem- perature and A/C setting, the compartment can keep beverages cool. V ehicles without air conditioning can use that space for storage. The lower bin holds the Owner ’s Manual and other important documents. CONSOLE FEA TURES The floor console contains both an upper and lower storage compartment.[...]

T o open the upper storage compartment, push inward on the upper handle to unlatch the upper lid and lift the lid open. T o open the lower storage compartment, lift upward on the lower handle to unlatch the lower storage compart- ment and lift the lid open. Upper Storage Compartment Lower Storage Compartment 3 UNDERST ANDING THE FEA TURES OF YOUR V[...]

W ARNING! Do not operate this vehicle with a console compart- ment lid in the open position. Cellular phones, music players, and other handheld electronic devices should be stowed while driving. Use of these devices while driving can cause an accident due to distrac- tion, resulting in death or injury . CARGO AREA FEA TURES Cargo Light/Removable Se[...]

T o operate the flashlight, press the switch once for high, twice for low , and a third time to return to off. Cargo Cover The cargo area trim panels include two notches for mounting the available tonneau cover that accommo- dates the reclining rear seat. T o install the Cargo Cover , insert either end of the cover into one of the two notches locat[...]

Using the handle, pull the cover toward you and guide the rear cover posts into the guides located on both sides of the rear trim panel. W ARNING! In an accident a cargo cover loose in the vehicle could cause injury . It could fly around in a sudden stop and strike someone in the vehicle. Do not store the cargo cover on the cargo floor or in the pa[...]

Removable Load Floor The cargo area contains a removable load floor . Cargo Tie-Down Loops There are two D-rings installed in the cargo ar ea for securing cargo. W ARNING! • Cargo tie-down loops are not safe anchors for a child seat tether strap. In a sudden stop or collision a loop could pull loose and allow the child seat to come loose. A child[...]

W ARNING! (Continued) • Place as much cargo as possible in front of the rear axle. T oo much weight or improperly placed weight over or behind the rear axle can cause the rear of the vehicle to sway . • Do not pile luggage or cargo higher than the top of the seatback. This could impair visibility or be- come a dangerous projectile in a sudden s[...]

REAR WINDOW FEA TURES Rear Window Wiper/W asher The rear wiper/washer is controlled by a rotary switch located on the center portion of the control lever . The control lever is located on the right side of the steering column. Rotate the center portion of the lever upwar d to the first detent position for rear wiper operationa. NOTE: The rear wiper[...]

Rear Window Defroster The r ear window defr oster button is located on the bottom right-side of the blower control knob. Press this button to turn on the rear window defroster and the heated outside mirrors (if equipped). An indica- tor in the button will illuminate when the rear window defroster is on. The rear window defroster automatically turns[...]

UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 Instrument Panel Features ............... 1 8 9 䡵 Instrument Cluster – Base ............... 1 9 0 䡵 Instrument Cluster – Premium ............ 1 9 1 䡵 Instrument Cluster Descriptions ........... 1 9 2 䡵 Electronic V ehicle Information Center (EVIC) — If Equipped .......................[...]

▫ Operation Instructions - (Disc Mode For CD And MP3/WMA Audio Play , DVD-V ideo) . . . 225 ▫ Notes On Playing MP3/WMA Files ....... 2 2 7 ▫ List Button (Disc Mode For MP3/WMA Play) .................... 2 3 0 ▫ Info Button (Disc Mode For MP3/WMA Play) ............................. 2 3 0 䡵 Media Center 730N/430 (RER/REN/RBZ) — AM/FM Ster[...]

▫ Notes On Playing MP3 Files ............ 2 5 4 ▫ List Button (CD Mode For MP3 Play) ...... 2 5 7 ▫ Info Button (CD Mode For MP3 Play) ...... 2 5 7 ▫ Uconnect™ Multimedia (Satellite Radio) — If Equipped .......................... 2 5 8 䡵 Universal Consumer Interface (UCI) 0.5 — If Equipped ............................ 2 6 2 ▫ Conn[...]

▫ Operating Instructions — V ideo Entertainment System (VES)™ (If Equipped) ....................... 2 7 3 䡵 Remote Sound System Controls — If Equipped .......................... 2 7 3 ▫ Radio Operation ..................... 2 7 4 ▫ CD Player ......................... 2 7 4 䡵 CD/DVD Disc Maintenance .............. 2 7 4 䡵 Radio Ope[...]

INSTRUMENT P ANEL FEA TURES 1 — Air Outlet 5 — Lower Glove Compartment/Beverage Cooler – If Equipped 9 — ESC OFF Switch – If Equipped 2 — Instrument Cluster 6 — Climate Controls 10 — Storage Bins 3 — Radio 7 — Heated Seat Switches – If Equipped 1 1 — Power Outlet 4 — Passenger Airbag 8 — Hazard W arning Flasher 4 UNDERST[...]

INSTRUMENT CLUSTER – BASE 190 UNDERST ANDING YOUR INSTRUMENT P ANEL I n f o r m a t i o n P r o v i d e d b y :[...]

INSTRUMENT CLUSTER – PREMIUM 4 UNDERST ANDING YOUR INSTRUMENT P ANEL 191 I n f o r m a t i o n P r o v i d e d b y :[...]

INSTRUMENT CLUSTER DESCRIPTIONS 1. T emperature Gauge The temperature gauge shows engine coolant tempera- ture. Any reading within the normal range indicates that the engine cooling system is operating satisfactorily . The gauge pointer will likely indicate a higher tempera- ture when driving in hot weather , up mountain grades, or when towing a tr[...]

W ARNING! A hot engine cooling system is dangerous. Y ou or others could be badly burned by steam or boiling coolant. Y ou may want to call an authorized dealer- ship for service if your vehicle overheats. If you decide to look under the hood yourself, see “Main- taining Y our V ehicle”. Follow the warnings under the Cooling System Pressure Cap[...]

If jump starting is required, refer to “Jump Starting Procedur es” in “What T o Do In Emergencies”. 7. Airbag W arning Light This light will turn on for four to eight seconds as a bulb check when the ignition switch is first turned ON. If the light is either not on during starting, stays on, or turns on while driving, then have the system i[...]

Further overheating will cause the temperature gauge to pass H , the indicator will continuously flash and a continuous chime will occur until the engine is allowed to cool. If the light turns on while driving, safely pull over and stop the vehicle. If the A/C system is on, turn it off. Also, shift the transmission into NEUTRAL and idle the ve- hic[...]

NOTE: The light may flash momentarily during sharp cornering maneuvers, which change fluid level condi- tions. The vehicle should have service performed, and the brake fluid level checked. If brake failure is indicated, immediate repair is neces- sary . W ARNING! Driving a vehicle with the red brake light on is dangerous. Part of the brake system m[...]

13. Shift Lever Indicator The Shift Lever Indicator is self-contained within the instrument cluster . It displays the gear position of the automatic transmission. 14. Odometer / T rip Odometer Display Area This display indicates the total distance the vehicle has been driven. NOTE: U.S. Federal regulations r equire that upon trans- fer of vehicle o[...]

“gA TE” and “Oil Change Required” will only be dis- played in the EVIC display . For additional information, refer to “Electronic V ehicle Information Center (EVIC) — If Equipped”. gASCAP If the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, a “gASCAP” message will display[...]

12 seconds after a single chime has sounded to indicate the next scheduled oil change interval. The engine oil change indicator system is duty cycle based, which means the engine oil change interval may fluctuate dependent upon your personal driving style. Unless reset, this message will continue to display each time you turn the ignition switch to[...]

key when the vehicle has completely stopped and the shift lever is placed in the NEUTRAL position. The light should turn off. If the light remains lit with the engine running, your vehicle will usually be drivable; however , see an authorized dealer for service as soon as possible. If the light is flashing when the engine is running, imme- diate se[...]

21. V ehicle Security Light — If Equipped This light will flash at a fast rate for approxi- mately 16 seconds, when the vehicle security alarm is arming, and then will flash slowly until the vehicle is disarmed. 22. Electronic Stability Control (ESC) Activation/ Malfunction Indicator Light — If Equipped The “ESC Activation/Malfunction Indicat[...]

by the vehicle manufacturer on the vehicle placard or tire inflation pressur e label. (If your vehicle has tires of a differ ent size than the size indicated on the vehicle placard or tire inflation pressure label, you should deter- mine the proper tire inflation pressure for those tires.) As an added safety feature, your vehicle has been equipped [...]

tires or wheels on your vehicle, to ensure that the replacement or alternate tires and wheels allow the TPMS to continue to function properly . CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system opera- tion [...]

CAUTION! Prolonged driving with the MIL on could cause damage to the engine control system. It also could affect fuel economy and drivability . If the MIL is flashing, severe catalytic converter damage and power loss will soon occur . Immediate service is required. W ARNING! A malfunctioning catalytic converter , as referenced above, can reach high[...]

27. T ransmission T emperatur e W arning Light — If Equipped During sustained high speed driving on hot days, the automatic transmission oil may be- come too hot. If this happens, the T ransmission T emperatur e W arning Light will come on and the vehicle will slow slightly until the automatic trans- mission cools down enough to allow a return to[...]

Refer to the Electronic V ehicle Information Center (EVIC) for further information. 30. Electronic V ehicle Information Center (EVIC) Display Button — If Equipped Press the left EVIC button to scroll through sub-menus. Press and hold the reset button for approximately two seconds, to reset the display shown. Refer to the Electronic V ehicle Infor[...]

• Compass heading • Outside temperature display • T rip computer functions • Uconnect™ Phone displays — If equipped • Audio mode display • T ire Pressur e Monitor (TPM) When the appropriate conditions exist, the EVIC displays the following messages. • T urn Signal On (with a continuous warning chime after 1 mile (1.6 km) of distan[...]

• Oil Change Required Oil Change Required — If Equipped Y our vehicle is equipped with an engine oil change indicator system. The “Change Oil” message will flash in the instrument cluster odometer for approximately 5 sec- onds after a single chime has sounded to indicate the next scheduled oil change interval. The engine oil change indicato[...]

EVIC Functions Press the EVIC button until one of the following func- tions are displayed on the EVIC: • Compass/T emperatur e/Audio • A verage Fuel Economy • Distance T o Empty (DTE) • Elapsed T ime • T ire Pressur e Monitor (TPM) • Personal Settings T o Reset The Display Pressing and holding the EVIC button once will clear the functio[...]

Compass/T emperature/Audio Press and release the EVIC button to display one of eight compass headings to indicate the direction the vehicle is facing, the outside temperature, and the current radio station. For additional information regar ding the compass, refer to “Personal Settings (Customer-Pr ogrammable Features)”. A verage Fuel Economy Sh[...]

Elapsed Time Shows the total elapsed time of travel since the last reset when the ignition switch is in the ACC position. Elapsed time will increment when the ignition switch is in the ON or ST AR T position. Tire Pressure Monitor (TPM) Refer to “T ir e Pressure Monitoring System (TPMS)” in “Starting and Operating” for further information. [...]

Auto Unlock On Exit When ON is selected all the vehicle’s doors will unlock when the driver’s door is opened if the vehicle is stopped (manual transmission) or the vehicle is stopped and the transmission is in P ARK or NEUTRAL position (auto- matic transmission). Press and hold the EVIC button when in this display until “ON” or “OFF” ap[...]

when exiting the vehicle. Press and hold the EVIC button when in this display until 0, 30, 60, or 90 appears to make your selection. Delay Power Off to Accessories Until Exit When this feature is selected, the power window switches, radio, Uconnect™ Phone, power sunroof, and power outlets will remain active for up to 10 minutes after the ignition[...]

Display Units In The EVIC, odometer , and Uconnect™ gps system units can be changed between English and Metric. Press and hold the EVIC button when in this display until “ENGLISH” or “METRIC” appears to make your selection. Automatic Compass Calibration When the vehicle is new , the compass may appear erratic and the EVIC will display “[...]

T o Set the V ariance: with the ignition in the ON position, with a short button press (less than one second) press and release the EVIC button several times until you have displayed the “Personal Settings (Customer- Programmable Features)” menu. Once in the “Personal Settings (Customer -Programmable Features)” menu, press and release (less[...]

Manual Compass Calibration If the compass appears erratic or inaccurate, and the variance has been properly set, you may wish to manu- ally recalibrate the compass. T o manually calibrate the compass: 1. Start the engine and leave the transmission in the P ARK position. 2. Using a quick button press (less than one second), press and release the EVI[...]

MEDIA CENTER 230 (REQ) — AM/FM STEREO RADIO AND 6–DISC CD/DVD CHANGER (MP3/WMA AUX JACK) NOTE: The radio sales code is located on the lower right side of the radio faceplate. Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Push the ON/VOL[...]

SEEK Buttons Press and release the SEEK buttons to search for the next listenable station in AM/FM mode. Pr ess the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping until you release it. SCAN Button P[...]

2. Adjust the hours by turning the right side TUNE/ SCROLL control knob. 3. After adjusting the hours, press the right side TUNE/ SCROLL control knob to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side TUNE/ SCROLL control knob. Press the TUNE/SCROLL control knob to save the time change. 5. T o exit, pres[...]

Push the rotary TUNE/SCROLL control knob a third time and TREBLE will display . T urn the TUNE/SCROLL control knob to the right or left to increase or decrease the treble tones. Push the rotary TUNE/SCROLL control knob a fourth time and BALANCE will display . T urn the TUNE/ SCROLL control knob to the right or left to adjust the sound level from th[...]

Program T ype 16-Digit Character Display Jazz Jazz News News Nostalgia Nostalga Oldies Oldies Personality Persnlty Public Public Rhythm and Blues R & B Religious Music Rel Musc Religious T alk Rel T alk Rock Rock Soft Soft Soft Rock Soft Rck Soft Rhythm and Blues Sof tR&B Sports Sports T alk T alk Program T ype 16-Digit Character Display T [...]

NOTE: T urn the TUNE/SCROLL control knob to scroll through the entries. Push the AUDIO/SELECT button to select an entry and make changes. • DVD Enter - When the disc is in DVD Menu mode, selecting DVD Enter will allow you to play the current highlighted selection. Use the remote control to scroll up and down the menu (if equipped). • DISC Play/[...]

• VES™ CH1/CH2 - Allows the user to change the mode of either the IR1 or IR2 wireless headphones by pressing the AUDIO/SELECT button (if equipped). • Set Home Clock - Pressing the SELECT button allows you to set the clock. T urn the TUNE/SCROLL control knob to adjust the hours and then press and turn the TUNE/SCROLL control knob to adjust the[...]

Subtitles — If Equipped Selecting this item allows you to choose between subtitle Off or On. Audio DRC — If Equipped Selecting this item allows you to limit maximum audio dynamic range. The default is set to ⬙ High, ⬙ and under this setting, dialogues will play at 1 1 db higher than if the setting is ⬙ Normal. ⬙ Aspect Ratio — If Equi[...]

Y ou may add a second station to each pushbutton by repeating the above procedure with this exception: Press the SET button twice and SET 2 will show in the display window . Each button can be set for SET 1 and SET 2 in both AM and FM. This allows a total of 12 AM, 12 FM, and 12 Satellite (if equipped) stations to be stored into pushbutton memory .[...]

NOTE: The ignition switch must be in the ON or ACC position to operate the radio. LOAD Button — Loading Compact Disc(s) Press the LOAD button and the pushbutton with the corresponding number (1-6) where the CD is being loaded. The radio will display PLEASE W AIT and prompt when to INSER T DISC. After the radio displays ⬙ INSER T DISC, ⬙ inser[...]

SCAN Button (CD MODE) Press the SCAN button to scan through each track on the CD currently playing. TIME Button (CD MODE) Press this button to change the display from a large CD playing time display to a small CD playing time display . R W/FF (CD MODE) Press and hold FF (Fast Forward) and the CD player will begin to fast forward until FF is release[...]

The radio uses the following limits for file systems: • Maximum number of directory levels: 8 • Maximum number of files: 255 • Maximum number of folders: 100 • Maximum number of characters in file/folder names: • Level 1: 12 (including a separator ⬙ . ⬙ and a three- character extension) • Level 2: 31 (including a separator ⬙ . ⬙[...]

MPEG Specification Sampling Frequency (kHz) Bit Rate (kbps) MPEG-1 Audio Layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 1 12, 96, 80, 64, 56, 48 MPEG-2 Audio Layer 3 24, 22.05, 16 160, 128, 144, 1 12, 96, 80, 64, 56, 48 WMA Specification Sampling Frequency (kHz) Bit Rate (kbps) WMA 44.1 and 48 48, 64, 96, 128, 160, 192 VBR ID3 T ag information [...]

T o increase the speed of disc loading, it is recommended to use CD-R media and single-session discs. T o create a single-session disc, enable the “Disc at Once” option before writing to the disc. LIST Button (DISC Mode for MP3/WMA Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is d[...]

is not loud enough, turn the device’s volume up. If the AUX audio sounds distorted, turn the device’s volume down. SEEK Button (Auxiliary Mode) No function. SCAN Button (Auxiliary Mode) No function. EJECT Button (Auxiliary Mode) No function. TIME Button (Auxiliary Mode) Press the TIME button to change the display from elapsed playing time to ti[...]

Operating Instructions - Uconnect™ Multimedia (Satellite Radio) (If Equipped) Refer to “Uconnect™ Multimedia (Satellite Radio)”. Operating Instructions - V ideo Entertainment System (VES)™ (If Equipped) Refer to separate “V ideo Entertainment System (VES)™ Guide.” Dolby 威 Manufactured under license from Dolby 威 Laboratories. ⬙[...]

The RER radio also contains a Global Positioning System (GPS)-based Navigation system. Refer to your Uconnect™ Multimedia REN, RER or RBZ user’s manual for detailed operating instructions. Operating Instructions — V oice Command System — If Equipped Refer to “V oice Command” in the Uconnect™ User Manual located on the DVD for further [...]

Changing Daylight Savings T ime When selected, this feature will display the time of day in daylight savings time. Proceed as follows to change the current setting: 1. T urn on the radio. 2. T ouch the screen where the time is displayed. The clock setting menu will appear on the screen. 3. When this feature is on, a check mark will appear in the bo[...]

want to select, touch the screen wher e the wor d “Page” is displayed to view additional time zones in the menu. 5. T ouch the screen where the word “Save” is displayed. Clock Setting Procedure — RER/REN Radio Uconnect 威 gps — RER Only The GPS receiver used in this system is synchronized to the time data being transmitted by the GPS s[...]

2. T ouch the screen where “User Clock” is displayed, the clock setting menu will appear on the screen. 3. When this feature is on, a check mark will appear in the box next to the words “Daylight Savings.” T ouch the screen where the words “Daylight Savings” are dis- played to change the current setting. Show T ime if Radio is Off When [...]

MEDIA CENTER 130 (RES) — AM/FM STEREO RADIO WITH CD PLA YER (MP3 AUX JACK) NOTE: The radio sales code is located on the lower right side of the radio faceplate. Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Push the ON/VOLUME contr ol k[...]

to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping, until you release it. TIME Button Press the TIME button to alternate display of the time and radio frequency . Clock Setting Procedure 1. Press and hold the TIME b[...]

Push the rotary TUNE/SCROLL control knob a second time and MID will display . T urn the TUNE/SCROLL control knob to the right or left to increase or decrease the mid-range tones. Push the rotary TUNE/SCROLL control knob a third time and TREBLE will display . T urn the TUNE/SCROLL control knob to the right or left to increase or decrease the treble [...]

SET 2 in both AM and FM. This allows a total of 12 AM and 12 FM stations to be stor ed into pushbutton memory . The stations stored in SET 2 memory can be selected by pressing the pushbutton twice. Every time a preset button is used, a corresponding button number will display . Button s1-6 These buttons tune the radio to the stations that you commi[...]

If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will show the track number , and index time in minutes and seconds. Play will begin at the start of track 1. CAUTION! • This CD player will accept 4-3/4 in (12 cm) discs only . The use of o[...]

the current selection. Pressing and holding the SEEK button will allow faster scrolling through the tracks in CD and MP3 modes. TIME Button Press this button to change the display from a large CD playing time display to a small CD playing time display . R W/FF Press and hold the FF (Fast Forward) button and the CD player will begin to fast forward [...]

Supported Medium Formats (File Systems) The medium formats supported by the radio are ISO 9660 Level 1 and Level 2 and includes the Joliet extension. When reading discs recorded using formats other than ISO 9660 Level 1 and Level 2, the radio may fail to read files properly and may be unable to play the file nor- mally . UDF and Apple HFS formats a[...]

Supported MP3 File Formats The radio will recognize only files with the *.MP3 exten- sion as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file. When using the MP3 encoder to compress audio data to an MP3 file, the bit rate and[...]

Loading times for playback of MP3 files may be affected by the following: • Media - CD-RW media may take longer to load than CD-R media • Medium formats - Multisession discs may take longer to load than non-multisession discs • Number of files and folders - Loading times will increase with more files and folders T o increase the speed of disc[...]

MEDIA CENTER 130 (RES/RSC) — AM/FM STEREO RADIO WITH CD PLA YER (MP3 AUX JACK) AND SIRIUS RADIO NOTE: The radio sales code is located on the lower right side of the radio faceplate. Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Push the[...]

to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping until you release it. V oice Command System (Radio) — If Equipped Refer to “V oice Command” in “Understanding The Fea- tures If Y our V ehicle”. V oice Co[...]

3. After adjusting the hours, press the right side TUNE/ SCROLL control knob to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side TUNE/ SCROLL control knob. Press the TUNE/SCROLL control knob to save time change. 5. T o exit, press any button/knob or wait five seconds. The clock can also be set by pressing[...]

Setting the T one, Balance, and Fade Push the rotary TUNE/SCROLL control knob and BASS will display . T urn the TUNE/SCROLL control knob to the right or left to increase or decrease the bass tones. Push the rotary TUNE/SCROLL control knob a second time and MID will display . T urn the TUNE/SCROLL control knob to the right or left to increase or dec[...]

T oggle the MUSIC TYPE button to select the following format types: Program T ype 16-Digit Character Display No program type or undefined None Adult Hits Adlt Hit Classical Classicl Classic Rock Cls Rock College College Country Country Foreign Language Language Information Inform Jazz Jazz News News Nostalgia Nostalga Oldies Oldies Program T ype 16[...]

By pressing the SEEK button when the Music T ype icon is displayed, the radio will be tuned to the next fr equency station with the same selected Music T ype name. The Music T ype function only operates when in the FM mode. If a preset button is activated while in the Music T ype (Program T ype) mode, the Music T ype mode will be exited and the rad[...]

Y ou may add a second station to each pushbutton by repeating the above procedure with this exception: Press the SET/RND button twice and SET 2 will show in the display window . Each button can be set for SET 1 and SET 2 in both AM and FM. This allows a total of 12 AM and 12 FM stations to be stor ed into pushbutton memory . The stations stored in [...]

If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will show the track number , and index time in minutes and seconds. Play will begin at the start of track 1. CAUTION! • This CD player will accept 4–3/4 in (12 cm) discs only . The use of[...]

the current selection. Pressing and holding the SEEK button will allow faster scrolling through the tracks in CD and MP3 modes. TIME Button Press this button to change the display from a large CD playing time display to a small CD playing time display . R W/FF Press and hold FF (Fast Forward) and the CD player will begin to fast forward until FF is[...]

Supported Medium Formats (File Systems) The medium formats supported by the radio are ISO 9660 Level 1 and Level 2 and includes the Joliet extension. When reading discs recorded using formats other than ISO 9660 Level 1 and Level 2, the radio may fail to read files properly and may be unable to play the file nor- mally . UDF and Apple HFS formats a[...]

Supported MP3 File Formats The radio will recognize only files with the *.MP3 exten- sion as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file. When using the MP3 encoder to compress audio data to an MP3 file, the bit rate and[...]

Loading times for playback of MP3 files may be affected by the following: • Media - CD-RW media may take longer to load than CD-R media • Medium formats - Multisession discs may take longer to load than non-multisession discs • Number of files and folders - Loading times will increase with more files and folders T o increase the speed of disc[...]

Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack which allows the user to plug in a portable device such as an MP3 player or cassette player and utilize the vehicle’s audio system to amplify the source and play through the vehicle speakers. Pressing the AUX button will change the mode to auxil- iary device i[...]

information, call the toll-free number 888-539-7474, or visit the Sirius web site at www .sirius.com, or at www- .siriuscanada.ca for Canadian residents. Electronic Serial Number/Sirius Identification Number (ESN/SID) Please have the following information available when calling: 1. The Electronic Serial Number/Sirius Identification Number (ESN/SID)[...]

Reception Quality Satellite reception may be interrupted due to one of the following reasons: • The vehicle is parked in an underground parking structur e or under a physical obstacle. • Dense tree coverage may interrupt reception in the form of short audio mutes. • Driving under wide bridges or along tall buildings can cause intermittent rec[...]

additional three seconds will make the radio display the Song T itle all of the time (press and hold again to return to normal display). R W/FF Pressing the R W (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next channel in the direction of the arrows. TUNE Control (Rotary) T urn the rotary TUNE/SCROLL control knob clockwi[...]

SET Button – T o Set the Pushbutton Memory When you are receiving a channel that you wish to commit to pushbutton memory , press the SET button. The symbol SET 1 will now show in the display window . Select the button (1-6) you wish to lock onto this channel and press and release that button. If a button is not selected within five seconds after [...]

This featur e allows an iPod 威 to be plugged into the vehicle’s sound system through a 16–pin connector , using the provided interface cable. UCI supports Mini, 4G, Photo, Nano, 5G iPod 威 and iPhone 威 devices. Some iPod 威 software versions may not fully support the UCI features. Please visit Apple’s website for software updates. NOTE:[...]

Using This Feature By using the provided connection cable to connect an iPod 威 to the vehicle’s UCI 16–pin connector port: • The iPod 威 audio can be played on the vehicle’s sound system, providing metadata (artist, track title, album, etc.) information on the radio display . • The iPod 威 can be controlled using the radio buttons to [...]

• Jump backward in the curr ent track by pressing and holding the << RW button. Holding the << RW button long enough will jump to the beginning of the current track. • Jump forward in the current track by pressing and holding the FF >> button. • A single press backward << RW or forward FF >> will jump backward or[...]

• RND button (available on sales code RES radio only): Pressing this button toggles between Shuffle ON and Shuffle OFF modes for the iPod 威 .I ft h e RND icon is showing on the radio display , then the shuf fle mode is ON. List Or Browse Mode During Play mode, pressing any of the buttons described below , will bring up List mode. List mode enab[...]

• Pressing a PRESET button will display the current list on the top line and the first item in that list on the second line. • T o Exit List mode without selecting a track, press the same PRESET button again to go back to Play mode . • LIST button: The LIST button will display the top level menu of the iPod 威 . T urn the TUNE control knob t[...]

Uconnect™ Multimedia (SA TELLITE RADIO) — IF EQUIPPED (REN/REQ/RER/RES/REU/RBZ RADIOS ONL Y) Satellite radio uses direct satellite-to-receiver broadcast- ing technology to provide clear digital sound, coast to coast. The subscription service provider is Sirius Satellite Radio. This service offers over 130 channels of music, sports, news, entert[...]

Sirius ID number will display . The Sirius ID number display will time out in two minutes. Pr ess any button on the radio to exit this screen. ESN/SID Access With REN/RER/RBZ Radios While in SA T mode, press the MENU button on the radio faceplate. Next, touch the SUBSCRIPTION tab on the touch screen. All the ESNs that apply to your vehicle will dis[...]

• Dense tree coverage may interrupt reception in the form of short audio mutes. • Driving under wide bridges or along tall buildings can cause intermittent reception. • Placing objects over or too close to the antenna can cause signal blockage. Operating Instructions — Uconnect™ Multimedia (Satellite) Mode NOTE: The ignition switch must b[...]

R W/FF Pressing the R W (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next channel in the direction of the arrows. TUNE Control (Rotary) T urn the rotary TUNE/SCROLL control knob clockwise to increase or counterclockwise to decrease the channel. MUSIC TYPE Button — Except REU Radio Pressing this button once will turn on[...]

SETUP Button Pressing the SETUP button allows you to select the following items: • Display Sirius ID number — Press the AUDIO/ SELECT button to display the Sirius ID number . This number is used to activate, deactivate, or change the Sirius subscription. SET Button – T o Set the Pushbutton Memory When you are receiving a channel that you wish[...]

Operating Instructions — Video Entertainment System (VES)™ (If Equipped) Refer to separate “V ideo Entertainment System (VES)™ Guide.” REMOTE SOUND SYSTEM CONTROLS — IF EQUIPPED The remote sound system controls ar e located on the rear surface of the steering wheel. Reach behind the wheel to access the switches. The right-hand control i[...]

The button located in the center of the right-hand control will switch modes to Radio or CD. The left-hand control is a rocker type switch with a pushbutton in the center . The function of the left-hand control is dif ferent depending on which mode you are in. The following describes the left-hand control operation in each mode. Radio Operation Pre[...]

3. Do not apply paper or tape to the disc; avoid scratch- ing the disc. 4. Do not use solvents such as benzene, thinner , cleaners, or anti-static sprays. 5. Store the disc in its case after playing. 6. Do not expose the disc to direct sunlight. 7. Do not store the disc wher e temperatures may become too high. NOTE: If you experience difficulty in [...]

Manual Heating and Air Conditioning The Manual T emperatur e Controls consist of a series of outer rotary dials and inner push knobs. Blower Control Rotate this control to regulate the amount of air forced through the ven- tilation system in any mode. The blower speed increases as you move the control to the right from the “O” (OFF) position. T[...]

T emperature Control Rotate this control to regulate the tem- perature of the air inside the passenger compartment. Rotating the dial left into the blue area of the scale indicates cooler temperatures while rotating right into the red area indicates warmer temperatures. NOTE: If your air conditioning performance seems lower than expected, check the[...]

NOTE: For all settings except full cold or full hot, there is a difference in temperature between the upper and lower outlets. The warmer air flows to the floor outlets. This feature gives improved comfort during sunny but cool conditions. Floor Air is directed through the floor outlets with a small amount flowing through the defrost and side windo[...]

NOTE: • Continuous use of the recirculation mode may make the inside air stuffy and window fogging may occur . Extended use of this mode is not recommended. • The use of the recirculation mode in cold or damp weather will cause windows to fog on the inside, because of moisture buildup inside the vehicle. Select the Outside Air position for maxi[...]

Automatic T emperature Control (A TC) — If Equipped The Automatic T emperature Control system automati- cally maintains the climate in the cabin of the vehicle at the comfort levels desired by the driver and passenger . Automatic Operation Operation of the system is quite simple. 1. T urn the Mode Control knob (on the right) and the Blower Contro[...]

The recommended setting for maximum comfort for the average person is 72°F (22°C); however , this may vary . NOTE: • The temperature setting can be adjusted at anytime without affecting automatic operation. • Pressing the Air Conditioning Control button while in AUTO mode will cause the LED in the control button to flash three times and then [...]

282 UNDERST ANDING YOUR INSTRUMENT P ANEL I n f o r m a t i o n P r o v i d e d b y :[...]

The operator can override the AUTO mode setting to change airflow distribution by r otating the Mode Control knob (on the right) to one of the following positions. • Panel Air is directed through the outlets in the instrument panel. These outlets can be adjusted to direct airflow . NOTE: The center instrument panel outlets can be aimed so that th[...]

• Air Conditioner Control Press this button to turn on the air conditioning during manual operation only . When the air conditioning is turned on, cool dehumidified air will flow through the outlets selected with the Mode control dial. Press this but- ton a second time to turn OFF the air conditioning. An LED in the button illuminates when manual[...]

• Most of the time, when in Automatic Operation, you can temporarily put the system into Recirculation Mode by pressing the Recirculation button. However , under certain conditions, while in Automatic Mode, the system is blowing air out the defrost vents. When these conditions are present, and the Recirculation button is pr essed, the indicator w[...]

W indow Fogging Interior fogging on the windshield can be quickly re- moved by turning the mode selector to Defrost. The Defrost/Floor mode can be used to maintain a clear windshield and provide sufficient heating. If side win- dow fogging becomes a problem, increase blower speed. V ehicle windows tend to fog on the inside in mild but rainy or humi[...]

Control Setting Suggestions for V arious W eather Conditions 4 UNDERST ANDING YOUR INSTRUMENT P ANEL 287 I n f o r m a t i o n P r o v i d e d b y :[...]

I n f o r m a t i o n P r o v i d e d b y :[...]

ST ARTING AND OPERA TING CONTENTS 䡵 Starting Procedures .................... 2 9 3 ▫ Manual T ransmission – If Equipped ....... 2 9 3 ▫ Automatic T ransmission – If Equipped ..... 2 9 3 ▫ Normal Starting ..................... 2 9 3 ▫ Extreme Cold W eather (Below ⫺ 20°F Or ⫺ 29°C) ............................ 2 9 4 ▫ If Engine [...]

䡵 AutoStick 威 — If Equipped ............... 3 0 2 ▫ Operation ......................... 3 0 2 ▫ General Information .................. 3 0 3 䡵 Driving On Slippery Surfaces ............. 3 0 4 ▫ Acceleration ........................ 3 0 4 ▫ T raction ........................... 3 0 4 䡵 Driving Through W ater ................. 3 0 5[...]

䡵 T ires — General Information ............. 3 3 0 ▫ T ire Pressur e ....................... 3 3 0 ▫ T ire Inflation Pressures ................ 3 3 1 ▫ T ire Pressur es For High Speed Operation . . . 333 ▫ Radial Ply T ires ..................... 3 3 3 ▫ Compact Spare T ire – If Equipped ........ 3 3 3 ▫ T ire Spinning ............[...]

▫ Fuel Filler Cap (Gas Cap) .............. 3 5 3 ▫ Loose Fuel Filler Cap Message ........... 3 5 5 䡵 V ehicle Loading ...................... 3 5 5 ▫ V ehicle Certification Label .............. 3 5 5 䡵 T railer T owing ........................ 3 5 7 ▫ Common T owing Definitions ............ 3 5 7 ▫ Installing A T railer Hitch .........[...]

ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. W ARNING! Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seri- ously or fatally injured. Do not leave the key in [...]

and release when the engine starts. If the engine fails to start within 15 seconds, turn the ignition switch to the OFF position, wait 10 to 15 seconds, then r epeat the “Normal Starting” procedure. W ARNING! Do not attempt to push or tow your vehicle to get it started. V ehicles equipped with an automatic trans- mission cannot be started this [...]

for no more than 15 seconds. This should clear any excess fuel in case the engine is flooded. Leave the ignition key in the ON position, release the accelerator pedal and repeat the “Normal Starting” procedure. W ARNING! Never pour fuel or other flammable liquid into the throttle body air inlet opening in an attempt to start the vehicle. This c[...]

MANUAL TRANSMISSION — IF EQUIPPED Five–Speed Manual T ransmission W ARNING! Y ou or others could be injured if you leave the vehicle unattended without having the parking brake fully applied. The parking brake should al- ways be applied when the driver is not in the vehicle, especially on an incline. Fully press the clutch pedal befor e you shi[...]

For most city driving, you will find it easier to use only the lower gears. For steady highway driving with light accelerations, fifth gear is recommended. Never drive with your foot resting on the clutch pedal, and never try to hold the vehicle on a hill with the clutch pedal partially engaged. This will cause abnormal wear on the clutch. Never sh[...]

T o maintain a safe speed and prolong brake life, shift down to second or first gear when descending a steep grade. When turning a corner or driving up a steep grade, downshift early so that the engine will not be overburdened. AUTOMA TIC TRANSMISSION — IF EQUIPPED NOTE: The Continuously V ariable Automatic T ransmis- sion (CVT) changes ratios in[...]

NOTE: Y ou MUST pr ess and hold the brake pedal down while shifting out of P ARK. W ARNING! It is dangerous to move the shift lever out of P ARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse. Y ou could lose control of the vehicle a[...]

NOTE: If a malfunction occurs, the transmission will not shift out of P ARK. Battery power is required to release the brake/transmission interlock system. There is a removable plug in the right side of the shifter housing that allows you to insert your finger to override the system. If this occurs, obtain service as soon as possible. Automatic T ra[...]

W ARNING! • Unintended movement of a vehicle could injure those in and near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, you should always shift the vehicle into P ARK, remove the key from the ignition, and apply the parking brake. Once the key is removed from the igniti[...]

CAUTION! Before moving the shift lever out of P ARK, you must turn the ignition from LOCK to ON so the steering wheel and shift lever are released. Otherwise, dam- age to the steering column or shift lever could result. Y ou must also press the brake pedal. REVERSE This range is for moving the vehicle rearwar d. Use this range only after the vehicl[...]

AutoStick 威 operation is activated in the DRIVE position by moving the shift lever side-to-side. Moving the shift lever to the (+) side will activate AutoStick 威 and shift up to the next higher manual ratio, unless you are already operating in or near Overdrive, in which case sixth gear ratio will be selected. In like manner , moving the shift [...]

DRIVING ON SLIPPERY SURF ACES Acceleration Rapid acceleration on snow covered, wet, or other slip- pery surfaces may cause the front wheels to pull errati- cally to the right or left. This phenomenon occurs when there is a dif ference in the surface traction under the front (driving) wheels. W ARNING! Rapid acceleration on slippery surfaces is dang[...]

DRIVING THROUGH W A TER Driving through water more than a few inches/ centimeters deep will require extra caution to ensur e safety and prevent damage to your vehicle. Flowing/Rising Water W ARNING! Do not drive on or across a road or path where water is flowing and/or rising (as in storm run-off). Flow- ing water can wear away the road or path’s[...]

CAUTION! (Continued) • Driving through standing water may cause dam- age to your vehicle’ s drivetrain components. Al- ways inspect your vehicle’ s fluids (i.e., engine oil, transmission, axle, etc.) for signs of contamination (i.e., fluid that is milky or foamy in appearance) after driving through standing water . Do not con- tinue to operat[...]

POWER STEERING The standard power steering system will give you good vehicle response and increased ease of maneuverability in tight spaces. The system will provide mechanical steering capability if power assist is lost. If for some reason the power assist is interrupted, it will still be possible to steer your vehicle. Under these condi- tions, yo[...]

checked if a leak is suspected, abnormal noises are apparent, and/or the system is not functioning as antici- pated. Coordinate inspection efforts through an autho- rized dealer . CAUTION! Do not use chemical flushes in your power steering system as the chemicals can damage your power steering components. Such damage is not covered by the New V ehi[...]

When the parking brake is applied with the ignition switch in the ON position, the “Brake W arning Light” in the instrument cluster will illuminate. NOTE: • When the parking brake is applied and the automatic transmission is placed in gear , the “Brake W arning Light” will flash. If vehicle speed is detected, a chime will sound to alert t[...]

W ARNING! • Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seriously or fatally injured. • Do not leave the key in the ignition switch. A child could operate power windows, other controls, or move the vehicle. • Be sure the parking brake is ful[...]

W ARNING! Riding the brakes can lead to brake failure and possibly an accident. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear , and possible brake damage. Y ou would not have your full braking capacity in an emergency . If either of the two hydraulic systems lose [...]

W ARNING! • Pumping of the anti-lock brakes will diminish their effectiveness and may lead to an accident. Pumping makes the stopping distance longer . Just press firmly on your brake pedal when you need to slow down or stop. • The ABS cannot prevent the natural laws of phys- ics from acting on the vehicle, nor can it increase braking or steeri[...]

If the “ABS W arning Light” is on, the brake system should be serviced as soon as possible to restor e the benefits of anti-lock brakes. If the “ABS W arning Light” does not come on when the ignition switch is turned to the ON position, have the bulb repair ed as soon as possible. If both the “Brake W arning Light” and the “ABS W arni[...]

W ARNING! The Anti-Lock Brake System (ABS) contains sophis- ticated electronic equipment that may be susceptible to interference caused by improperly installed or high output radio transmitting equipment. This in- terference can cause possible loss of Anti-Lock brak- ing capability . Installation of such equipment should be performed by qualified p[...]

Anti-Lock Brake System (ABS). Applying the brakes very quickly results in the best BAS assistance. T o receive the benefit of the system, you must apply continuous brak- ing pressur e during the stopping sequence (do not “pump” the brakes). Do not reduce brake pedal pressure unless braking is no longer desired. Once the brake pedal is released,[...]

spinning faster than the other , the system will apply the brake of the spinning wheel. This will allow more engine torque to be applied to the wheel that is not spinning. This feature remains active even if TCS and ESC are in the “Partial Off” mode. Refer to “Electronic Stability Control (ESC)” in this section for further information. Hill[...]

Disabling/Enabling HSA If you wish to turn on or off the HSA system, it can be done using the Customer Programmable Features in the Electronic V ehicle Information Center (EVIC). Refer to “Electronic V ehicle Information Center (EVIC)” in “Un- derstanding Y our Instrument Panel” for further informa- tion. For vehicles not equipped with the [...]

Electronic Stability Control (ESC) This system enhances directional control and stability of the vehicle under various driving conditions. ESC cor- rects for over-steering or under-steering of the vehicle by applying the brake of the appropriate wheel to assist in counteracting the over-steering or under-steering condi- tion. Engine power may also [...]

W ARNING! (Continued) • ESC cannot prevent accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. Only a safe, attentive, and skillful driver can prevent accidents. • The capabilities of an ESC-equipped vehicle must never be exploited in a reckless or dangerous manner , which coul[...]

Full On This is the normal operating mode for ESC. Whenever the vehicle is started the ESC system will be in this “On” mode. This mode should be used for most driving situations. ESC should only be turned to “Partial Off” for specific reasons as noted below . Partial Off This mode is entered by momentarily pressing the “ESC Off” switch.[...]

TIRE SAFETY INFORMA TION Tire Markings NOTE: • P (Passenger) - Metric tire sizing is based on U.S. design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. • European-Metric tire sizing is based on European design standards. T ires designed to this standard have[...]

T ires designed to this standard have the letter “T” molded into the sidewall preceding the size designa- tion. Example: T145/80D18 103M. • High flotation tire sizing is based on U.S. design standards and it begins with the tire diameter molded into the sidewall. Example: 31x10.5 R15 L T . T ire Sizing Chart EXAMPLE: Size Designation: P = Pas[...]

EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions — The maximum speed corresponding to the speed symbol should only be a[...]

Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however , the date code may only be on one side. T ir es with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle[...]

Tire T erminology and Definitions T erm Definition B-Pillar The vehicle B-Pillar is a structural member of the body located between the front and rear door (of a four-door vehicle) running from the sill to the roof. Cold T ire Pressure Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least 3 [...]

Tire Loading and Tire Pressure T ire Placard Location NOTE: The proper cold tire inflation pressur e is listed on the driver’s side B-Pillar . T ire and Loading Information Placard This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry 3) tire size desi[...]

Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. Y ou will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size, and cold tire inflation pressures specified on the T ir e and Loading Information placard and in the “V ehicle Loading” [...]

4. The resulting figure equals the available amount of cargo and luggage load capacity . For example, if “XXX” amount equals 1,400 lbs (635 kg) and there will be five 150 lb (68 kg) passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs (295 kg) (since 5 x 150 = 750, and 1400 – 750 = 650 lbs [295 kg]). [...]

5 ST ARTING AND OPERA TING 329 I n f o r m a t i o n P r o v i d e d b y :[...]

W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMA TION Tire Pressure Proper tire inflation pressur e is essential to the safe and satisfactory o[...]

W ARNING! (Continued) • Unequal tire pressures from one side of the ve- hicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recom- mended cold tire inflation pressure. Economy Improper inflation pressur es can cause uneven wear patterns to develop across the tire tread. These abn[...]

CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressur es specified on the placard are always “cold tire inflation pressur e.” Cold tire inflation pressur e is defined as the tire press[...]

Tire Pressures for High Speed Operation The manufacturer advocates driving at safe speeds within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high speeds, maintaining correct tire inflation pressure is very important. Increased tire pressure and reduced vehicle loading may be required for high-s[...]

W ARNING! • T emporary use spare tires are for emergency use only . W ith these tires, do not drive more than 50 mph (80 km/h). • T emporary-use spare tires have limited tread life. When the tread is worn to the tread wear indica- tors, the temporary use spare tire needs to be replaced. • Be sure to follow the warnings which apply to your spa[...]

W ARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure some- one. Do not spin your vehicle’s wheels faster than 30 mph (48 km/h) or for more than 30 seconds continuously when you are stuck, and do not let anyone near a spinning wheel, no matt[...]

Life of Tire The service life of a tire is dependent upon varying factors including, but not limited to: • Driving style • T ire pressur e • Distance driven W ARNING! T ires and the spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. Y ou could los[...]

W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle. This can cause unpredict- able handling and stress to steeri[...]

TIRE CHAINS Due to limited clearance, tire chains are not recom- mended. CAUTION! Damage to the vehicle may result if tire chains are used. SNOW TIRES Some areas of the country require the use of snow tires during W inter . Standard tires are of the all-season type and satisfy this requirement as indicated by the M+S designation on the tire sidewal[...]

Refer to “Maintenance Schedule” for the proper mainte- nance intervals. More frequent rotation is permissible if desired. The reasons for any rapid or unusual wear should be corrected prior to rotation being performed. The suggested rotation method is shown in the following diagram. TIRE PRESSURE MONITORING SYSTEM (TPMS) The T ir e Pressur e Mo[...]

The TPMS will warn the driver of a low tire pressure if the tire pressure falls below the low-pressur e warning limit for any reason, including low temperatur e effects, or natural pressure loss through the tire. The TPMS will continue to warn the driver of low tire pressur e as long as the condition exists, and will not turn off until the tire pre[...]

CAUTION! • The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warnings have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when us- ing replacement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause[...]

• Seasonal temperature changes will affect tire pressur e, and the TPMS will monitor the actual tire pressure in the tire. Base System This is the TPMS warning indicator located in the instrument cluster . The TPMS uses wireless technology with wheel rim mounted electronic sensors to monitor tire pressure lev- els. Sensors, mounted to each wheel [...]

fault is detected. The system fault will also sound a chime. If the ignition key is cycled, this sequence will repeat providing the system fault still exists. The T ir e Pressur e Monitoring T elltale Light will turn off when the fault condition no longer exists. A system fault can occur with any of the following scenarios: 1. Jamming due to electr[...]

5. Once you repair or replace the original road tire and reinstall it on the vehicle in place of the compact spare tire, the TPMS will update automatically and the T ire Pressur e Monitoring T elltale Light will turn OFF , as long as no tire pressure is below the low-pressur e warning limit in any of the four active road tires. The vehicle may need[...]

T ire Pressure Monitoring Low Pressure W arnings The T ir e Pressur e Monitoring T elltale Light will illumi- nate in the instrument cluster and an audible chime will be activated when one or more of the four active road tir e pressur es are low . The audible chime will sound once every ignition cycle for each condition that it detects. In addition[...]

graphic display of the pressur e value(s) will stop flash- ing, and the T ire Pressur e Monitoring Light will extin- guish once the updated tire pr essure(s) have been re- ceived. The vehicle may need to be driven for up to 20 minutes above 15 mph (25 km/h) to receive this information. Check TPMS Message The T ir e Pressur e Monitoring T elltale Li[...]

will be displayed instead of dashes. A system fault can occur with any of the following scenarios: 1. Jamming due to electronic devices or driving next to facilities emitting the same radio frequencies as the TPM sensors. 2. Installing some form of aftermarket window tinting that affects radio wave signals. 3. Snow or ice around the wheels or wheel[...]

5. Once you repair or replace the original road tire and reinstall it on the vehicle in place of the compact spare tire, the TPMS will update automatically and the T ire Pressur e Monitoring T elltale Light will turn OFF , as long as no tire pressure is below the low-pressur e warning limit in any of the four active road tires. The vehicle may need[...]

Poor quality gasoline can cause problems such as hard starting, stalling and hesitations. If you experience these symptoms, try another brand of gasoline (with the ap- propriate octane rating for your engine) before consider- ing service for the vehicle. Reformulated Gasoline Many areas of the country require the use of cleaner burning gasoline r e[...]

E85 Usage In Non-Flex Fuel V ehicles Non-FFV vehicles are compatible with gasoline contain- ing 10% ethanol (E10). Gasoline with higher ethanol content may void the vehicle’s warranty . If a Non-FFV vehicle is inadvertently fueled with E85 fuel, the engine will have some or all of these symptoms: • operate in a lean mode • OBD II “Malfuncti[...]

It is even more important to look for gasoline without MMT in Canada, because MMT can be used at levels higher than those allowed in the United States. MMT is prohibited in Federal and California reformu- lated gasoline. Materials Added T o Fuel All gasoline sold in the United States is requir ed to contain effective detergent additives. Use of add[...]

NOTE: Intentional tampering with emissions control systems can result in civil penalties being assessed against you. Carbon Monoxide Warnings W ARNING! Carbon monoxide (CO) in exhaust gases is deadly . Follow the precautions below to prevent carbon monoxide poisoning: (Continued) W ARNING! (Continued) • Do not inhale exhaust gases. They contain c[...]

ADDING FUEL Fuel Filler Cap (Gas Cap) The gas cap is behind the fuel filler door , on the left side of the vehicle. If the gas cap is lost or damaged, be sure the replacement cap is for use with this vehicle. After removing the gas cap, place the gas cap tether cable over a hook on the inside of the fuel door . This keeps the gas cap suspended away[...]

CAUTION! • Damage to the fuel system or emission control system could result from using an improper fuel tank filler cap (gas cap). A poorly fitting cap could let impurities into the fuel system. • A poorly fitting gas cap may cause the “Malfunc- tion Indicator Light (MIL)” to turn on. • T o avoid fuel spillage and overfilling, do not “[...]

Loose Fuel Filler Cap Message If the vehicle diagnostic system determines that the fuel filler cap is loose or improperly installed, a “gASCAP” message will be displayed in the Odometer/T rip Odom- eter in the instrument cluster . Refer to “Instrument Cluster Description” in “Understanding Y our Instrument Panel” for further information[...]

Gross V ehicle W eight Rating (GVWR) The GVWR is the total allowable weight of your vehicle. This includes driver , passengers, and cargo. The total load must be limited so that you do not exceed the GVWR. T ire Size The tire size on the V ehicle Certification Label repr esents the actual tire size on your vehicle. Replacement tires must be equal t[...]

Overloading can cause potential safety hazards and shorten useful service life. Heavier suspension compo- nents do not necessarily increase the vehicle’s GVWR. Loading T o load your vehicle properly , first figure out its empty weight. Store heavier items down low and be sure you distribute their weight as evenly as possible. Stow all loose items[...]

exceed the GVWR. Refer to “V ehicle Loading/V ehicle Certification Label” in “Starting and Operating” for further information. Gross T railer W eight (GTW) The GTW is the weight of the trailer plus the weight of all cargo, consumables and equipment (permanent or tem- porary) loaded in or on the trailer in its ⬙ loaded and ready for operat[...]

Frontal Area The fr ontal ar ea is the maximum height multiplied by the maximum width of the front of a trailer . T railer Sway Control The trailer sway control is a telescoping link that can be installed between the hitch r eceiver and the trailer tongue that typically pr ovides adjustable friction associated with the telescoping motion to dampen [...]

Installing A T railer Hitch NOTE: If you install a trailer hitch after you purchase the vehicle, you must install a MOP AR 威 or equivalent spare tire hold down kit. The kit will allow you to properly secure the spare tire and jack assembly . W ARNING! Do not operate the vehicle without a properly se- cured tire and jack assembly . Any loose items[...]

T railer T owing Weights (Maximum T railer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/T ransmission Frontal Area Max. GTW (Gross T railer Wt.) Max. T ongue Wt. (See Note) 2.0L Auto/Man 22 sq ft (2.04 sq m) 1,000 lbs (450 kg) 150 lbs (50 kg) 2.4L Auto/Man 22 sq ft (2.04 s[...]

T railer And T ongue Weight Always load a trailer with 60% to 65% of the weight in the fr ont of the trailer . This places 10% to 15% of the GTW on the tow hitch of your vehicle. Loads balanced over the wheels or heavier in the r ear can cause the trailer to sway severely from side-to-side which will cause loss of con- trol of vehicle and trailer .[...]

NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options, or dealer-installed options, must be considered as part of the total load on your vehicle. Refer to the “T ire and Loading Information Placard” in “T ire Safety Information” for the maximum combined weight [...]

W ARNING! Improper towing can lead to an injury accident. Follow these guidelines to make your trailer towing as safe as possible: • Make certain that the load is secured in the trailer and will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control. [...]

W ARNING! (Continued) 2. GTW 3. GA WR 4. T ongue weight rating for the trailer hitch utilized (this requirement may limit the ability to always achieve the 10% to 15% range of tongue weight as a percentage of total trailer weight). T owing Requirements – T ires − Do not attempt to tow a trailer while using a compact spare tire. − Proper tire [...]

actuated brakes. When towing a trailer equipped with a hydraulic surge actuated brake system, an electronic brake controller is not required. − T railer brakes are recommended for trailers over 1,000 lbs (450 kg) and requir ed for trailers in excess of 2,000 lbs (907 kg). CAUTION! If the trailer weighs more than 1,000 lbs (450 kg) loaded, it shou[...]

T owing Requirements – T railer Lights and W iring Whenever you pull a trailer , regardless of the trailer size, stop lights and turn signals on the trailer are requir ed for motoring safety . The T railer T ow Package may include a four-pin and seven-pin wiring harness. Use a factory approved trailer harness and connector . NOTE: Do not cut or s[...]

T owing Tips Before setting out on a trip, practice turning, stopping and backing the trailer in an area away from heavy traffic. If using a manual transmission vehicle for trailer towing, all starts must be in first gear to avoid excessive clutch slippage. Electronic Speed Control – If Equipped − Do not use in hilly terrain or with heavy loads[...]

Cooling System T o reduce potential for engine and transmission over- heating, take the following actions: − City Driving When stopped for short periods of time, shift the trans- mission into NEUTRAL and increase the engine idle speed. − Highway Driving Reduce speed. − Air Conditioning T urn off temporarily . RECREA TIONAL TOWING (BEHIND MOTO[...]

NOTE: V ehicles equipped with manual transmissions may be recreationally towed (flat towed) at any legal highway speed, for any distance, if the manual transmis- sion is in NEUTRAL and the ignition key is in the ACC position. CAUTION! • Do not flat tow any vehicle equipped with a automatic transmission. Damage to the drivetrain will result. If th[...]

WHA T T O DO IN EMERGENCIES CONTENTS 䡵 Hazard W arning Flasher ................ 3 7 2 䡵 If Y our Engine Overheats ................ 3 7 2 䡵 Automatic T ransaxle Overheating .......... 3 7 3 䡵 Jacking And T ir e Changing ............... 3 7 4 ▫ Jack Location ....................... 3 7 4 ▫ Spare T ir e Stowage ................... 3 7 4 ?[...]

HAZARD W ARNING FLASHER The Hazard W arning flasher switch is located on the instrument panel, below the radio. Press the switch to turn on the Hazard W arning flasher . When the switch is activated, all directional turn signals will flash on and of f to warn oncoming traffic of an emergency . Press the switch a second time to turn off the Hazard W[...]

CAUTION! Driving with a hot cooling system could damage your vehicle. If the pointer rises to the H (red) mark, the instrument cluster will sound a chime. When safe, pull over and stop the vehicle with the engine at idle. T urn off the air conditioning and wait until the pointer drops back into the normal range. If the pointer remains on the H (red[...]

JACKING AND TIRE CHANGING W ARNING! • Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. Y ou could be crushed. Never put any part of your body under a vehicle that is on a jack. Never start or run the engine while the vehicle is on a jack. If you need to get under a raised vehicle, take it to a ser[...]

Preparations For Jacking 1. Park the vehicle on a firm level surface, avoiding ice or slippery areas. W ARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel. 2. Set the parking brake. 3. Place the shift [...]

Jacking Instructions W ARNING! Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle: • Always park on a firm, level surface as far from the edge of the roadway as possible before raising the vehicle. • Block the wheel diagonally opposite the wheel to be raised. • Set the parking brake firmly [...]

1. Remove the scissors jack and lug wrench from the spare wheel as an assembly . T urn the jack scr ew to the left to loosen the lug wrench and remove the wrench from the jack assembly . 2. Loosen, but do not remove, the wheel nuts by turning them to the left one turn while the wheel is still on the ground. CAUTION! Do not attempt to raise the vehi[...]

3. There are two front jacking locations and two r ear jacking locations on each side of the body . The front locations are outlined by two triangular cutouts, the rear ones by two rectangular cutouts. For vehicles equipped with plastic trim, the plastic has been cut away to expose the jacking locations in the body . Do not raise the vehicle until [...]

CAUTION! Be sure to mount the spare tire with the valve stem facing outward. The vehicle could be damaged if the spare tire is mounted incorrectly . W ARNING! T o avoid possible personal injury , handle the wheel covers with care to avoid contact with any sharp edges. NOTE: The wheel cover is held on the wheel by the wheel nuts. When reinstalling t[...]

9. Remove the wheel blocks and lower the jack until it is free. Reassemble the lug wr ench to the jack assembly and stow it in the spare tire area. Secure the assembly using the means provided. W ARNING! A loose tire or jack thrown forward in a collision or hard stop could endanger the occupants of the ve- hicle. Always stow the jack parts and the [...]

W ARNING! Do not attempt jump-starting if the battery is frozen. It could rupture or explode and cause personal injury . Preparations for Jump-Start The battery in your vehicle is located in the front of the engine compartment below the air intake duct. T o access the battery remove the air intake duct by turning the two finger screws, located on t[...]

W ARNING! • T ake care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is on. Y ou can be injured by moving fan blades. • Remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact. Y ou could be seriously injured. • Batteries contain su[...]

3. If using another vehicle to jump-start the battery , park the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is OFF . W ARNING! Do not allow vehicles to touch each other as this could establish a ground connection and personal injury could result. Jump-Starting Procedure W ARNING! Failure to follow this [...]

W ARNING! Do not connect the cable to the negative post (-) of the discharged battery . The resulting electrical spark could cause the battery to explode and could result in personal injury . 5. Start the engine in the vehicle that has the booster battery , let the engine idle a few minutes, and then start the engine in the vehicle with the dischar[...]

FREEING A STUCK VEHICLE If your vehicle becomes stuck in mud, sand or snow , it can often be moved by a rocking motion. T urn your steering wheel right and left to clear the area ar ound the front wheels. Then shift back and forth between RE- VERSE and 1st gear . Using minimal accelerator pedal pressur e to maintain the rocking motion, without spin[...]

TOWING A DISABLED VEHICLE With Ignition Key Automatic T ransaxle • Front Wheel Drive (FWD) vehicles can be towed with the front wheels elevated or on a flatbed tr uck (all four wheels off the ground). • All Wheel Drive (A WD) vehicles must be towed on a flatbed truck (all four wheels off the ground). CAUTION! DO NOT flat tow any vehicle equippe[...]

CAUTION! • If the vehicle being towed requires steering, the ignition switch must be in the ACC position, not in the LOCK position. • Do not attempt to use sling-type equipment when towing. When securing the vehicle to a flatbed truck, do not attach to front or rear suspension components. Damage to your vehicle may result from improper towing. [...]

I n f o r m a t i o n P r o v i d e d b y :[...]

MAINT AINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment — 2.0L ............. 3 9 1 䡵 Engine Compartment — 2.4L ............. 3 9 2 䡵 Onboard Diagnostic System — OBD II ...... 3 9 3 ▫ Loose Fuel Filler Cap Message ........... 3 9 3 䡵 Emissions Inspection And Maintenance Programs ............................ 3 9 4 䡵 Replacement Part[...]

▫ Cooling System ..................... 4 0 7 ▫ Brake System ....................... 4 1 3 ▫ Automatic T ransmission (CVT) – If Equipped ........................ 4 1 6 ▫ Manual T ransmission – If Equipped ....... 4 1 7 ▫ Appearance Care And Protection From Corrosion .......................... 4 1 7 䡵 Fuses ...........................[...]

ENGINE COMP ARTMENT — 2.0L 1 — W asher Fluid Reservoir 6 — Integrated Power Module 2 — Power Steering Fluid Reservoir 7 — Battery (Under Cover) 3 — Engine Oil Fill 8 — Coolant Pressure Cap 4 — Air Cleaner Filter 9 — Engine Oil Dipstick 5 — Brake Fluid Reservoir 10 — Engine Coolant Reservoir 7 MAINT AINING YOUR VEHICLE 391 I n [...]

ENGINE COMP ARTMENT — 2.4L 1 — W asher Fluid Reservoir 6 — Battery (Under Cover) 2 — Power Steering Fluid Reservoir 7 — Air Cleaner Filter 3 — Engine Oil Fill 8 — Coolant Pressure Cap 4 — Brake Fluid Reservoir 9 — Engine Oil Dipstick 5 — Integrated Power Module 10 — Engine Coolant Reservoir 392 MAINT AINING YOUR VEHICLE I n f [...]

ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated Onboard Diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly , your vehicle will provide excellent performance and fuel economy , as well[...]

persists, the message will appear the next time the vehicle is started. This might indicate a damaged cap. If the problem is detected twice in a row , the system will turn on the MIL. Resolving the problem will turn the MIL light off. EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS In some localities, it may be a legal requir ement to pass an inspect[...]

4. Approximately 15 seconds later , one of two things will happen: a. The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn OFF the ignition or start the engine. This means that your vehicle’s OBD II system is not ready and you should not proceed to the I/M station. b. The MIL will not flash at all and [...]

your vehicle. Refer to these Service Manuals before attempting any procedure yourself. NOTE: Intentional tampering with emissions control systems may void your warranty and could r esult in civil penalties being assessed against you. W ARNING! Y ou can be badly injured working on or around a motor vehicle. Only do service work for which you have th[...]

CAUTION! (Continued) • Y our vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance intervals. Do not use chemical flushes in these components as the chemicals can damage your engine, transmission, power steering or air condi- tioning. Such damage is not covered [...]

CAUTION! Do not overfill the engine. Overfilling the engine as indicated by the range markings, as described above, on the engine oil dipstick will cause oil aeration, which can lead to loss of oil pressure and an increase in oil temperature. This could damage your engine. Change Engine Oil The oil change indicator system will remind you that it is[...]

Engine Oil V iscosity (SAE Grade) SAE 5W -20 engine oil is recommended for all operating temperatures. This engine oil improves low temperature starting and vehicle fuel economy . Y our engine oil filler cap also states the recommended engine oil viscosity grade for your engine. Lubricants which do not have both the engine oil certi- fication mark [...]

station, or governmental agency for advice on how and where used oil and oil filters can be safely discarded in your area. Engine Oil Filter The engine oil filter should be replaced with a new filter at every engine oil change. Engine Oil Filter Selection All of this manufacturer’s engines have a full-flow type disposable oil filter . Use a filte[...]

Maintenance-Free Battery Y our vehicle is equipped with a maintenance-fr ee battery . Y ou will never have to add water , nor is periodic main- tenance required. W ARNING! • Battery fluid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin, or clothing. Do not lean over a battery when[...]

CAUTION! • It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post. Battery posts are marked posi- tive (+) and negative (-) and are identified on the battery case. Cable clamps should be tight on the terminal posts and free of corros[...]

W ARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air condi- tioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs. Refer to W arranty Information Book, located on t[...]

hood latching components to ensur e proper function. When performing other underhood services, the hood latch, release mechanism and safety catch should be cleaned and lubricated. The external lock cylinders should be lubricated twice a year , preferably in the Fall and Spring. Apply a small amount of a high quality lubricant, such as MOP AR 威 Lo[...]

should be checked at regular intervals. Fill the reservoir with windshield washer solvent (not engine coolant (antifreeze). W ARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer solution. Exhaust System The best protection against c[...]

W ARNING! (Continued) • A hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming into contact with your exhaust system. Do not park or operate your ve- hicle in areas where your exhaust system can contact anything that can burn. CAUTION! • The catalytic converter requires the[...]

NOTE: Intentional tampering with emissions control systems can result in civil penalties being assessed against you. In unusual situations involving grossly malfunctioning engine operation, a scorching odor may suggest severe and abnormal catalyst overheating. If this occurs, stop the vehicle, turn of f the engine and allow it to cool. Service, inc[...]

Coolant Checks Check engine coolant (antifreeze) protection every 12 months (before the onset of freezing weather , where applicable). If the engine coolant (antifreeze) is dirty or rusty in appearance, the system should be drained, flushed and r efilled with fresh engine coolant (anti- freeze). Check the front of the A/C condenser for any accumula[...]

CAUTION! • Mixing of engine coolant (antifreeze) other than specified Hybrid Organic Additive T echnology (HOA T) engine coolant (antifreeze), may result in engine damage and may decrease corrosion pro- tection. If a non-HOA T engine coolant (antifreeze) is introduced into the cooling system in an emer- gency , it should be replaced with the spec[...]

Please review these recommendations for using Hybrid Organic Additive T echnology (HOA T) engine coolant (antifreeze). When adding engine coolant (antifreeze): • The manufacturer recommends using MOP AR 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Organic Additive T echnology) or equivalent. • Mix a minimum solution of 50% [...]

W ARNING! • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety pre- caution. Never add engine coolant (antifreeze) when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system. T o prevent scalding or injury , do not remove [...]

long as the engine operating temperature is satisfactory , the coolant bottle need only be checked once a month. When additional engine coolant (antifreeze) is needed to maintain the proper level, it should be added to the coolant bottle. Do not overfill. Points to Remember NOTE: When the vehicle is stopped after a few miles/ kilometers of operatio[...]

• Keep the front of the radiator clean. If your vehicle is equipped with air conditioning, keep the front of the condenser clean. • Do not change the thermostat for Summer or W inter operation. If r eplacement is ever necessary , install ONL Y the correct type thermostat. Other designs may result in unsatisfactory engine coolant (antifreeze) pe[...]

when the pads are replaced. However , low fluid level may be caused by a leak and a checkup may be needed. NOTE: If your vehicle is equipped with a manual transmission , the brake fluid reservoir supplies fluid to both the brake system and the clutch release system. The two systems are separated in the reservoir , and a leak in one system will not [...]

W ARNING! (Continued) • T o avoid contamination from foreign matter or moisture, use only new brake fluid or fluid that has been in a tightly closed container . Keep the master cylinder reservoir cap secured at all times. Brake fluid in a open container absorbs moisture from the air resulting in a lower boiling point. This may cause it to boil un[...]

Automatic T ransmission (CVT) – If Equipped Selection Of Lubricant It is important that the proper lubricant is used in the transmission to assure optimum transmission perfor- mance. Use only the manufacturer’s recommended trans- mission fluid which has been formulated with special metal to metal friction coef ficient additives to provide the p[...]

(CVTF+4 威 ). CVTF+4 威 is an engineered product and its performance may be impaired by supplemental additives. Manual T ransmission – If Equipped Lubricant Selection Use only the manufacturers recommended transmission fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Y our V ehicle” for further information. Fluid [...]

The following maintenance r ecommendations will enable you to obtain maximum benefit from the corrosion resistance built into your vehicle. What Causes Corrosion? Corrosion is the result of deterioration or removal of paint and protective coatings from your vehicle. The most common causes of corrosion are: • Road salt, dirt and moisture accumulat[...]

CAUTION! • Do not use abrasive or strong cleaning materials such as steel wool or scouring powder , which will scratch metal and painted surfaces. • Use of power washers exceeding 1,200 psi (8 274 kPa) can result in damage or removal of paint and decals. Special Care • If you drive on salted or dusty roads or if you drive near the ocean, hose[...]

Wheel And Wheel T rim Care All wheels and wheel trim, especially aluminum and chrome-plated wheels, should be cleaned regularly with a mild soap and water to prevent corrosion. T o remove heavy soil, use MOP AR 威 Wheel Cleaner or select a nonabrasive, non-acidic cleaner . Do not use scouring pads, steel wool, a bristle brush or metal polishes. On[...]

Y our leather upholstery can be best preserved by regular cleaning with a damp, soft cloth. Small particles of dirt can act as an abrasive and damage the leather upholstery and should be removed promptly with a damp cloth. Stubborn soils can be removed easily with a soft cloth and MOP AR 威 T otal Clean or equivalent. Care should be taken to avoid[...]

not use scrapers or other sharp instruments which may scratch the elements. When cleaning the rearview mirror , spray cleaner on the towel or rag that you are using. Do not spray cleaner directly on the mirror . Instrument Panel Cover The instr ument panel cover has a low glare surface which minimizes reflections on the windshield. Do not use prote[...]

Replace the seat belts if they appear frayed or worn or if the buckles do not work properly . Dry with a soft cloth. FUSES Integrated Power Module (IPM) The Integrated Power Module (IPM) is located in the engine compartment near the air cleaner assembly . This center contains cartridge fuses and mini-fuses. A label that identifies each component ma[...]

Cavity Cartridge Fuse Mini- Fuse Description 3 10 Amp Red CHMSL Brake Switch Feed 4 10 Amp Red Ignition Switch Feed/ OCM 5 20 Amp Y ellow T railer T ow – If Equipped 6 10 Amp Red IOD Sw/Pwr Mir/ Steering Cntrl Sdar/ Hands-Free Phone – If Equipped 7 30 Amp Green IOD Sense1 8 30 Amp Green IOD Sense2 9 40 Amp Green Power Seats – If Equipped Cavi[...]

Cavity Cartridge Fuse Mini- Fuse Description 17 10 Amp Red IOD Feed Mod-Wcm 18 40 Amp Green ASD Relay Contact PWR Feed 19 20 Amp Y ellow PWR Amp 1 & Amp 2 Feed 20 15 Amp Lt Blue IOD Feed Radio 21 10 Amp Red IOD Feed Intrus Mod/Siren – If Equipped 22 10 Amp Red IGN RUN Heat/AC/ Compass Sensor 23 15 Amp Lt Blue ENG ASD Relay Feed 3 24 15 Amp Lt[...]

Cavity Cartridge Fuse Mini- Fuse Description 33 10 Amp Red ABS MOD/J1962 Conn/PCM 34 30 Amp Pink ABS V alve Feed 35 40 Amp Green ABS Pump Feed 36 30 Amp Pink Headlamp/W asher Control/Smart Glass – If Equipped 37 25 Amp Natural Diesel Fuel Heater – If Equipped CAUTION! • When installing the IPM cover , it is important to ensure the cover is pr[...]

VEHICLE STORAGE If you will not be using your vehicle for more than 21 days, you may want to take steps to preserve your battery . • Disengage the mini-fuse in the Power Distribution Center labeled IOD (Ignition Off-Draw). • Disconnect the negative cable from the battery . REPLACEMENT BULBS All the inside bulbs are brass or glass wedge base. Al[...]

1. Disconnect and isolate the negative battery cable. 2. W orking in the appr opriate wheel well, loosen the front of the splash shield, but do not fully remove it. 3. Looking up through the front wheel well, locate the bulb which needs replacing. The headlamp bulb is the inboard bulb and the park/turn signal bulb is the out- board bulb. 4. Disconn[...]

7. From behind the front fascia disconnect the engine compartment wire harness connector from the front fog lamp bulb connector receptacle. 8. Firmly grasp the bulb by the two latch features and squeeze them together to unlock the bulb from the back of the front fog lamp housing. 9. Pull the bulb straight out from the keyed opening in the housing. [...]

2. Grasp the tail lamp and pull firmly to disengage the lamp from the aperture panel. NOTE: It is not necessary to completely remove the tail lamp unit. Once loosened from the quarter panel, there should be enough room to service any of the bulbs. 3. Disconnect the electrical connector from the bulb. 4. T wist and remove socket from the lamp. 430 M[...]

5. Remove the bulb from the socket and replace. License Lamps 1. Using a trim stick or equivalent, gently pry on the side of the license plate lamp to release it from the liftgate. 7 MAINT AINING YOUR VEHICLE 431 I n f o r m a t i o n P r o v i d e d b y :[...]

2. Rotate the socket 1/4 turn counterclockwise and re- move from the lamp. 3. Pull the bulb from the socket. Center High-Mounted Stoplamp The lamp is an LED assembly . See your authorized dealer for replacement. 432 MAINT AINING YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :[...]

FLUID CAP ACITIES U.S. Metric Fuel (Approximate) 13.6 Gallons 51.5 Liters Engine Oil with Filter 2.0L and 2.4L Engine (SAE 5W -20, API Certified) 4.5 Quarts 4.26 Liters Cooling System * 2.0L and 2.4L Engine (MOP AR 威 Engine Coolant/Antifreeze 5 Y ear/100,000 Mile Formula or equivalent) 7.2 Quarts 6.8 Liters * Includes heater and coolant recovery [...]

FLUIDS, LUBRICANTS, AND GENUINE P ARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant MOP AR 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hy- brid Organic Additive T echnology) or equivalent. Engine Oil Use API Certified SAE 5W -20 Engine Oil, meeting the requirements of Chrysler Material Standard MS-6395. Refer to [...]

Chassis Component Fluid, Lubricant, or Genuine Part Automatic T ransmission (CVT) – If Equipped MOP AR 威 CVTF + 4 威 Manual T ransmission – If Equipped MOP AR 威 A TF+4 威 Automatic T ransmission Fluid or equivalent licensed A TF+4 威 product. Brake Master Cylinder MOP AR 威 DOT 3, SAE J1703 should be used. If DOT 3, SAE J1703 brake flui[...]

I n f o r m a t i o n P r o v i d e d b y :[...]

MAINTENANCE SCHEDULES CONTENTS 䡵 Emissions Control System Maintenance ...... 4 3 8 䡵 Maintenance Schedule .................. 4 3 8 ▫ Required Maintenance Intervals .......... 4 4 0 8 M A I N T E N A N C E S C H E D U L E S I n f o r m a t i o n P r o v i d e d b y :[...]

EMISSIONS CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services listed in bold type must be done at the times or mileages specified to ensure the continued proper functioning of the emissions contr ol system. These and all other maintenance services in- cluded in this manual, should be done to provide best vehicle performance and reliabilit[...]

NOTE: • The oil change indicator message will not monitor the time since the last oil change. Change your vehicle’s oil if it has been six months since your last oil change and even if the oil change indicator message is NOT illuminated. • Change your engine oil more often if you drive your vehicle off-road for an extended period of time. •[...]

• Inspect the battery and clean and tighten the terminals as required. • Check the fluid levels of coolant reservoir , brake master cylinder , power steering and transmission and add as needed. • Check all lights and other electrical items for correct operation. At Each Oil Change • Change the engine oil filter . • Inspect the brake hoses[...]

6,000 Miles (10,000 km) or 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 12,000 Miles (20,000 km) or 12 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tire[...]

18,000 Miles (30,000 km) or 18 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 24,000 Miles (40,000 km) or 24 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate ti[...]

30,000 Miles (50,000 km) or 30 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter. ❏ Replace the spark plugs. ❏ Adjust the parking brake on vehicles equipped with four-wheel disc brakes. Odometer Reading Date Repair Order # Dealer Code Signature Autho[...]

42,000 Miles (70,000 km) or 42 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary . Odometer Reading Date Repair Order # Dealer Code Signature Authorized C[...]

54,000 Miles (90,000 km) or 54 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary . Odometer Reading Date Repair Order # Dealer Code Signature Authorized C[...]

66,000 Miles (1 10,000 km) or 66 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 72,000 Miles (120,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate[...]

78,000 Miles (130,000 km) or 78 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 84,000 Miles (140,000 km) or 84 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate [...]

90,000 Miles (150,000 km) or 90 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter. ❏ Replace the spark plugs. ❏ Inspect and replace PCV valve if necessary . † ❏ Adjust the parking brake on vehicles equipped with four-wheel disc brakes. Odometer R[...]

102,000 Miles (170,000 km) or 102 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Flush and replace the engine coolant. ❏ Flush and replace the engine coolant if not done at 60 months. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 108,000 Miles (18[...]

1 14,000 Miles (190,000 km) or 1 14 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 120,000 Miles (200,000 km) or 120 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ R[...]

126,000 Miles (210,000 km) or 126 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 132,000 Miles (220,000 km) or 132 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rot[...]

138,000 Miles (230,000 km) or 138 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 144,000 Miles (240,000 km) or 144 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rot[...]

† This maintenance is recommended by the manufacturer to the owner , but is not required to maintain emissions warranty . W ARNING! • Y ou can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, ta[...]

I n f o r m a t i o n P r o v i d e d b y :[...]

IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 Suggestions For Obtaining Service For Y our V ehicle .............................. 4 5 7 ▫ Prepar e For The Appointment ........... 4 5 7 ▫ Prepar e A List ...................... 4 5 7 ▫ Be Reasonable W ith Requests ............ 4 5 7 䡵 If Y ou Need Assistance ................. 4 5 7 ▫ Chrysl[...]

䡵 Publication Order Forms ................ 4 6 1 䡵 Department Of T ransportation Uniform T ire Quality Grades ........................ 4 6 2 ▫ T r eadwear ......................... 4 6 3 ▫ T raction Grades ..................... 4 6 3 ▫ T emperatur e Grades .................. 4 6 3 456 IF YOU NEED CONSUMER ASSIST ANCE I n f o r m a t i o n[...]

SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty . Discuss additional charges with the service manager . Keep a maintenance log of your vehicle’s[...]

This is why you should always talk to an authorized dealer’s service manager first. Most matters can be re- solved with this process. • If for some reason you are still not satisfied, talk to the general manager or owner of the authorized dealer- ship. They want to know if you need assistance. • If an authorized dealership is unable to resolv[...]

Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing difficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its customer center . Any hearing or speech impaired customer , who has access to a TDD or a conventional teletypewriter (TTY) in the[...]

W e appreciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, tools, and training to assure that you are absolutely delighted with the ownership experience. Y ou’ll be pleased with their sincere efforts to resolve any warranty issues or related concerns. W[...]

If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However , NHTSA cannot become involved in individual problems between you, your authorized dealer , and the manufacturer . T o contact NHTSA, you may either call the Auto [...]

vehicle, system, and/or components is written in straightforward language with illustrations, diagrams, and charts. • Diagnostic Procedure Manuals Diagnostic Procedur e Manuals are filled with dia- grams, charts and detailed illustrations. These practi- cal manuals make it easy for students and technicians to find and fix problems on computer-con[...]

in each category is shown on the sidewall of the tires on your vehicle. All passenger car tires must conform to Federal safety requir ements in addition to these grades. T readwear The T readwear grade is a comparative rating, based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For examp[...]

grade C corresponds to a level of performance, which all passenger car tires must meet under the Federal Motor V ehicle Safety Standard No. 109. Grades B and A repr e- sent higher levels of performance on the laboratory test wheel, than the minimum requir ed by law . W ARNING! The temperature grade for this tire is established for a tire that is pr[...]

INDEX 10 I n f o r m a t i o n P r o v i d e d b y :[...]

ABS (Anti-Lock Brake System) .............. 3 1 1 Adding Engine Coolant (Antifreeze) .......... 4 0 9 Adding Fuel ........................... 3 5 3 Adding W asher Fluid ..................... 4 0 4 Additives, Fuel ......................... 3 5 1 Air Cleaner , Engine (Engine Air Cleaner Filter) . . . 400 Air Conditioner Maintenance ............... 4 [...]

Overheating .......................... 3 7 3 Selection Of Lubricant ................... 4 1 6 Shifting ............................. 3 0 0 Special Additives ...................... 4 1 6 Autostick ............................. 3 0 2 Battery ............................... 4 0 1 Keyless T ransmitter Replacement (RKE) ....... 2 4 Belts, Seat .........[...]

Cargo Light ............................ 1 7 8 Cargo Load Floor ........................ 1 8 1 Cargo T ie-Downs ........................ 1 8 1 Cellular Phone ........................ 99,275 Center High Mounted Stop Light ............ 4 3 2 Chains, T ire ............................ 3 3 8 Changing A Flat T ir e ..................... 3 7 4 Chart, T i[...]

Inspection ........................... 4 1 1 Points to Remember ................. 410,412 Pressur e Cap ......................... 4 1 0 Selection of Coolant (Antifreeze) ........... 4 0 8 Corrosion Protection ..................... 4 1 7 Cruise Light ........................... 1 9 9 Cupholders ............................ 1 7 6 Customer Assistance [...]

Electronic Stability Program (ESP) ............ 3 1 8 Electronic V ehicle Information Center (EVIC) .... 2 0 6 Emergency , In Case of Jacking ............................. 3 7 4 Jump Starting ......................... 3 8 0 T owing ............................. 3 8 6 Emission Control System Maintenance ...... 394,438 Engine ........................[...]

Fluid, Brake ........................... 4 3 5 Fluid Capacities ......................... 4 3 3 Fluid Leaks ............................. 8 9 Fluid Level Checks Automatic T ransaxle .................... 4 1 6 Power Steering ........................ 3 0 7 Fluids ................................ 4 3 4 Fluids, Lubricants and Genuine Parts .......... 4[...]

Odometer ........................... 1 9 7 T achometer .......................... 1 9 6 Gearshift .............................. 3 0 0 General Information ................. 17,127,348 General Maintenance ..................... 3 9 6 Glass Cleaning .......................... 4 2 1 Glove Compartment ...................... 1 7 5 Gross Axle W eight Rati[...]

Information Center , V ehicle ................. 2 0 6 Inside Rearview Mirror .................... 9 5 Instrument Cluster .................... 190,192 Instrument Panel and Controls .............. 1 8 9 Instrument Panel Cover ................... 4 2 2 Instrument Panel Lens Cleaning ............. 4 2 2 Integrated Power Module (Fuses) ............ 4 2 [...]

Brake W arning ........................ 1 9 5 Bulb Replacement ...................... 4 2 7 C a r g o .............................. 1 7 8 Center Mounted Stop ................... 4 3 2 Dimmer Switch, Headlight ............... 1 4 6 Electronic Stability Program (ESP) Indicator . . . 318 Engine T emperature W arning .............. 1 9 4 Exterior ....[...]

Maintenance Free Battery .................. 4 0 1 Maintenance, General ..................... 3 9 6 Maintenance Procedures ................... 3 9 6 Maintenance Schedule .................... 4 3 8 Malfunction Indicator Light (Check Engine) . . 203,394 Manual, Service ......................... 4 6 1 Manual T ransaxle .................. 293,296,417 Do[...]

Filter ............................... 4 0 0 Identification Logo ..................... 3 9 8 Materials Added to ..................... 3 9 9 Recommendation ................... 398,433 Synthetic ............................ 3 9 9 V iscosity ............................ 3 9 9 Onboard Diagnostic System .............. 393,394 Opener , Garage Door (HomeL[...]

Radio, Satellite (Uconnect 威 studios) ........... 2 6 8 Rear Fog Lights ......................... 4 2 9 Rear Liftgate (Sedan) ...................... 3 5 Rear Seat, Folding ....................... 1 4 2 Rear W indow Defroster ................... 1 8 4 Rear W indow Features .................... 1 8 3 Rear W iper/W asher ...................... 1 8 3[...]

Seat Belt Reminder ....................... 5 5 Seat Belts .............................. 8 7 Adjustable Shoulder Belt .................. 4 4 Adjustable Upper Shoulder Anchorage ........ 4 4 And Pregnant W omen ................... 5 6 Child Restraint ........................ 7 4 Front Seat ............................ 3 9 Inspection ................[...]

Snow T ires ............................ 3 3 8 Spare T ir e .......................... 333,374 Specifications O i l ................................ 3 9 8 Speed Control (Cruise Control) ........... 155,199 Speedometer ........................... 1 9 3 Speedometer and Odometer ................ 1 9 0 Starting ............................... 2 9 3 Aut[...]

T ire Markings .......................... 3 2 1 T ire Safety Information .................... 3 2 1 T i r e s ............................ 89,330,462 Aging (Life of T ir es) .................... 3 3 6 Air Pressure .......................... 3 3 0 Chains .............................. 3 3 8 Changing ............................ 3 7 4 Compact Spare .[...]

Hitches ............................. 3 6 0 Minimum Requirements ................. 3 6 3 T railer and T ongue W eight ............... 3 6 2 W iring .............................. 3 6 7 T railer T owing Guide ..................... 3 6 1 T railer W eight .......................... 3 6 1 T ransaxle ............................. 2 9 8 Automatic .......[...]

V ehicle Theft Alarm (Security Alarm) .......... 1 7 V oice Recognition System (VR) .............. 1 2 7 W arning Lights (Instrument Cluster Description) ............. 1 9 2 W arnings and Cautions ..................... 6 W arranty Information ..................... 4 6 0 W asher , Adding Fluid ..................... 4 0 4 W ashers, W indshield ......[...]

Chrysler Group LLC 10PM491-126-AC 3rd Edition Printed in U.S.A. I n f o r m a t i o n P r o v i d e d b y :[...]