Husqvarna 327HE3X manuel d'utilisation

E E E E n n n n g g g g l l l l i i i i s s s s h h h h 327HD A65 X-series 327HE3 X-series 327HE4 X-series Oper ator ′ s manual Please r ead the operator’ s manual carefully and mak e sure you understand the instructions before using the machine.[...]

KEY T O SYMBOLS 2 – English Symbols W ARNING! Incorrect or careless use of a hedge trimmer can tur n it into a dangerous tool that can cause serious or ev en fatal injury . It is extremely important that you read and understand the contents of this operator’ s manual. Please read the operator’ s manual carefully and make sure y ou understand [...]

CONTENTS English – 3 Contents Note the f ollowing bef ore starting: Please read the oper ator’ s manual carefully . KEY T O SYMBOLS Symbols ................................................................ 2 CONTENTS Contents ............................................................... 3 Note the follo wing before starting: ..................[...]

4 – English INTR ODUCTION Dear Customer , Cong ratulations on your choice to b uy a Husqvarna product! Husqvarna is based on a tradition that dates back to 1689, when the Swedish King Karl XI ordered the construction of a factory on the banks of the Husqvarna River , for production of muskets . The location was logical, since w ater power was har[...]

English – 5 WHA T IS WHA T? What is what? 327HDA65 327HE4 1 Cutter 2 Grease nipple and plug for filling lubricant. 3 Bev el gear 4 Blade guard (327HD A65) 5 Shaft 6 F ront handle (327HDA65, 327HE3) 7 F ront handle (327HE4) 8 Throttle control 9 Stop switch 10 Throttle lock 11 Harness suppor t hook (327HE4) 12 Cylinder cov er 13 Star ter handle 14[...]

GENERAL SAFETY PRECA UTIONS 6 – English Impor tant P ersonal protective equipment HEARING PR O TECTION Wear hearing protection that provides adequate noise reduction. EYE PRO TECTION Alwa ys wear approved e ye protection. If you use a visor then you must also w ear approved protectiv e goggles. Approv ed protective goggles must comply with standa[...]

GENERAL SAFETY PRECA UTIONS English – 7 CLO THING Wear clothes made of a strong f abric and avoid loose clothing that can catch on twigs and branches. Alwa ys wear heavy , long pants. Do not wear je weller y , shor ts sandals or go barefoot. Secure hair so it is abo ve shoulder lev el. FIRST AID KIT Alwa ys have a first aid kit nearb y . Mac hin[...]

GENERAL SAFETY PRECA UTIONS 8 – English position then the carburettor idle setting must be adjusted. See instructions under the heading Maintenance. Stop switc h Use the stop switch to s witch off the engine. Star t the engine and mak e sure the engine stops when you mov e the stop switch to the stop setting. Hand guar d (327HD A65, 327HE3) The h[...]

GENERAL SAFETY PRECA UTIONS English – 9 a spark arrestor mesh. Check whether the muffler on your machine is fitted with this kind of mesh. For m ufflers it is very impor tant that you f ollow the instructions on checking, maintaining and servicing your machine. Nev er use a machine that has a faulty muffler . Regularly check that the muffler[...]

ASSEMBL Y 10 – English Fitting the hand guard and loop handle (327HD A65, 327HE3) 1 Assemble the hand guard and loop handle b y screwing them together . T ake care to align the holes in both par ts . (327HDA65) 2 Slide the loop handle and hand guard onto the shaft. (327HD A65) 3 Slide the spacer into the slot in the loop handle. 4 Fit the nut and[...]

ASSEMBL Y English – 11 Adjusting the harness (327HE4) Y ou should alwa ys use the har ness with the machine to give maximum control o ver the machine and reduce the risk of fatigue in your arms and back. 1 Put on the harness. 2 Hook the machine onto the harness suppor t hook. 3 Adjust the length of the harness so that the suppor t hook is roughly[...]

FUEL HANDLING 12 – English Fuel safety Nev er star t the machine: 1 If you ha ve spilt fuel on it. Wipe off the spillage and allow remaining fuel to e vaporate. 2 If you ha ve spilt fuel on yourself or y our clothes, change your clothes. W ash any par t of your body that has come in contact with fuel. Use soap and water . 3 If the machine is leak[...]

FUEL HANDLING English – 13 Mixing • Alwa ys mix the petrol and oil in a clean container intended for fuel. • Alwa ys star t by filling half the amount of the petrol to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture. Add the remaining amount of petrol. • Mix (shake) the fuel mixture thoroughly bef ore filling the [...]

ST AR TING AND ST OPPING 14 – English Check bef ore star ting • Inspect the working area. Remove an y objects that could be thrown out. • Check the cutting attachment. Ne ver use blades that are dull, crack ed or damaged. • Check that the machine is in perf ect working order. Check that all nuts and scre ws are tight. • Make sure the gear[...]

ST AR TING AND ST OPPING English – 15 CA UTION! Do not pull the star ter cord all the way out and do not let go of the star ter handle when the cord is fully extended. This can damage the machine. CA UTION! Do not put any par t of your body in marked area. Contact can result in burns to the skin, or electrical shock if the spark plug cap has been[...]

W ORKING TECHNIQ UES 16 – English General working instructions P ersonal protection • Alwa ys wear boots and other equipment described under the heading P ersonal protective equipment. • Alwa ys wear working clothes and heavy-duty long trousers. • Nev er wear loose clothing or jewellery . • Make sure y our hair does not hang below shoulde[...]

W ORKING TECHNIQ UES English – 17 • Alwa ys lay the machine on the ground when y ou are not using it. • Do not cut too close to the ground. Stones and other objects can be thrown out. • Check the working area f or foreign objects such as electricity cables, insects and animals, etc , or other objects that could damage the cutting attachment[...]

W ORKING TECHNIQ UES 18 – English (327HD A65) • Undo the knob . • Press the cutting unit against the hedge or some other firm surface until the required angle is set. • Tighten the knob . T ransport position (327HE4) Once the work has been completed fold the cutting unit back against the shaft to simplify transport and storage of the hedge[...]

MAINTENANCE English – 19 Carburettor Y our Husqv ar na product has been designed and manuf actured to specifications that reduce har mful emissions. After the engine has used 8-10 tanks of fuel the engine will be run-in. T o ensure that it continues to run at peak performance and to minimise harmful exhaust emissions after the running-in period,[...]

MAINTENANCE 20 – English cause fire if directed against dry and combustible material. Some mufflers are equipped with a special spark arrestor mesh. If your machine has this type of muffler , you should clean the mesh at least once a week. This is best done with a wire brush. On mufflers without a catalytic conv er ter the mesh should be clea[...]

MAINTENANCE English – 21 spark plug should be replaced after about a month in operation or earlier if necessary . CA UTION! Always use the recommended spark plug type! Use of the wrong spark plug can damage the piston/ cylinder . Check that the spark plug is fitted with a suppressor . Air filter The air filter must be regularly cleaned to remo[...]

MAINTENANCE 22 – English Cleaning and lubrication Clean any resin and plant residue from the blades using cleaning agent 531 00 75-13 (UL22) before and after using the machine. Lubricate the blade bars with special grease, part no. 531 00 75-12 (UL 21) before long periods of storage .[...]

English – 23 MAINTENANCE Maintenance schedule The follo wing is a list of the maintenance that must be performed on the machine. Most of the items are described in the Maintenance section. The user must only carr y out the maintenance and ser vice work described in this Operator’s Manual. More extensiv e work must be carried out by an authorize[...]

24 – English TECHNICAL D A T A T echnical data Note 1: Noise emissions in the environment measured as sound power (L W A ) in conformity with EC directive 2000/14/ EC. Note 2: Equivalent sound pressure le vel is calculated as the time-weighted energy total for sound pressure le vels under various working conditions with the follo wing time distri[...]

English – 25 TECHNICAL D A T A EC-declaration of conf ormity (Applies to Europe onl y) Husqvarna AB , SE-561 82 Huskv ar na, Sweden, tel: +46-36-146500, declare under sole responsibility that the hedge trimmers Husqvarna 327HD A65 from 2009’ s serial numbers and onwards (the year is clearly stated in plain te xt on the type plate with subsequen[...]

[...]

[...]

1151377-26 ´®z+SEh¶6Y¨ ´®z+SEh¶6Y¨ 2009-05-11[...]