Novatel SMART-AG manuel d'utilisation

OM-20000123 Rev 2 SMART-AG User Manual[...]

2 SMART -AG User Manual Rev 2 SMART -AG User Manual Publicatio n Number: OM-20000123 Revision Level: 2 Revision Date: 200812/08 Firmware Version: 3.600 or higher Propriet ary Notice Information in this documen t is subject to change without notice and does not represent a commitm ent on the part of NovAtel Inc. The software described in this docume[...]

SMART-AG User Manual Rev 2 3 T able of Content s Customer Service 15 Foreword 16 Congratulations! ............... ................ ................ ................... ................. ................ ...... 16 Scope .................. ................ ................ ................ ................ .................... ................ ... 16[...]

4 SMART- AG User Manual Rev 2 T able of Contents 4.4 Firmware Upgrades ....... ................. ................ ................... ................ ................ ... 44 4.4.1 Upgrading Using t he AUTH Command .............. ................ ................... ...... 44 4.4.2 Updating Using the WinLoad Utility ......................... ......[...]

SMART-AG User Manual Rev 2 5 Ta b l e s 1 SMART-AG Controller Models ................................................................................... 19 2 SMART-AG Connector Pin-Out ................... .............................................................. 21 3 Default Port Configurations .................................................[...]

6 SMART-AG User Manual Rev 2 Figures 1 SMART-AG Receiver ....................................................................................................... 18 2 SMART-AG Connector ..................................................................................................... 20 3 Simplified SMART-AG Setup ................................[...]

SMART-AG User Manual Rev 2 7 Sof tware License Softwar e License BY INST ALLING , COPYING , OR OTHERWISE USING THE SOFTW ARE PRODUCT , YOU AGREE TO BE BOUND BY THE TERMS OF THIS AGRE EMENT . IF YOU DO NOT AGREE WITH THESE TERMS OF USE, DO NOT INST ALL, COPY OR USE THIS ELECTRONIC PRODUCT (SOFTW ARE, FIRMW ARE, SC RIPT FILES, OR OTHER ELECTRONIC PRO[...]

8 SMART- AG User Manual Rev 2 Software License ware from unauthorized disclosure or use. 5. T erm and T ermination : This Agreement and the righ ts and li cences hereby granted shall continue in force in perpetuity unless terminated by NovAtel or Licensee in accord ance herewith. In the event that the Licensee shall at any time during the term of t[...]

SMART-AG User Manual Rev 2 9 Wa r r a n t y Warra nty NovAtel Inc. warrants that its pr oducts are free from defects in mate rials and workmans hip, subject to the conditions set forth below, for the followi ng periods of time, from the date of sale: SMAR T -AG One (1) Y ear Antenna One (1) Y ear Cables and Accessories Ninety (90) Days Computer Dis[...]

10 SMART-AG Us er Manual Re v 2 Sof tware License Standard T erms and Conditions of Sales 1. PRICES: All prices are Firm Fixed Price, FCA 1120 - 68th Avenue N.E., Calgary, Alberta. All prices incl ude standard comm ercial packing for domestic shipment. All transportation, insurance, special packing costs and expenses , and all Federal, provincial a[...]

T erms and Conditions SMART-AG User Manual Rev 2 11 NovAtel in writing to be confiden tial and shall not disclose it wi thout NovAtel's prior consent in writing to any third party or use it other th an for the operation and maintenance o f any Equipment provided. 5. GENERAL PROVISIONS: All Purchase Orders are subject to approval and acceptance[...]

12 SMART-AG User Manual Rev 2 T erms and Conditions consent from NovAtel, (vii) Products designat ed by NovAt el as beta site test samples, experimental, developmental, preproduction, samp le, incomp lete or out of specification Products, (viii) returned Produc ts if the original identification mark s have been removed or altered or (ix) Services o[...]

SMART-AG User Manual Rev 2 13 Notice Notice The following notices apply to the SMAR T -AG . For more information on emissions testi ng, please refer to the regulatory body in your geographic area. For example, in the US that is the Federal Communications Commissi on (FCC) and in Eu rope the Conformité Européenne (CE). FCC NOTICES This device comp[...]

14 SMART-AG User Manual Rev 2 Notice WARNING: This is a Class A product. In a domesti c environment this product may cause radio interference in which case the user may be required to tak e adequate measures. "Hereby, NovAtel Inc. declar es that this SM ART-AG is in compliance with the essential requirements and other relevant provisions of Di[...]

SMART -AG User Manual Rev 2 15 Customer Service Customer Servic e OEMV FIRMWARE UPGRADES Firmware upgrades are fi rmware releases, which increase basic f unctionality of the receiver from one model to a higher level model type. When available, upgrad es may be pur chased at a p rice, which i s the difference between the two model types on the curre[...]

16 SMART -AG User M anual Rev 2 Foreword Foreword Congratulations! Congratulations on your purchase of the SMAR T -AG , a GPS L1 plus GLONASS L1 receiver and antenna with exceptional flexib ility and performance. NovAtel is an industry leader in state-of-the-art Global Navigation Satellit e Systems (GNSS) receiver design. W e believe that our SMAR [...]

Foreword SMART -AG User Manual Rev 2 17 Conventions Some simple conventions used in this manual are:  This is a notebox that contains important inform ation. • The letter H in the Offset columns of the commands and logs tables represents the header length for that comm and or log. Refer to the OEMV Family Firmware Refer ence Manual for ASCII a[...]

18 SMART -AG User M anual Rev 2 Chapter 1 Introduction The SMAR T -AG is a high-performance GNSS recei ver and antenna, capable of receiving and tracking different combinat ions of GPS L1 and GLONASS L1 code and carrier on a maximum of 36 channels. SBAS (Satellite B ased Augmentati on Systems in clude W AAS, EGNOS, and MSAS) support is standard and[...]

Introduction Chapter 1 SMART -AG User Manual Rev 2 19 T able 1: SMART -AG Controller Mode ls Refer also to the OEMV Family Installa tion and Operation User Manual for information on receiver communications and operation. Model Name Firmware Feature SMART-V1-PVT GPS L1 only Autonomous, SBAS, or DGPS positions with emul ated radar output SMART-V1-PVT[...]

20 SMART -AG User M anual Rev 2 Chapter 2 Inst allation and Setup This chapter contains instructio ns and tips to set up your SMAR T -AG to create a GNSS receiver system. 2.1 Additional Equipment Required In order for the receiver to pe rform optimally , the following additional e quipment is required: • A PC/laptop (user-supplied) • A means of[...]

Installation and Setup Chapter 2 SMART -AG User Manual Rev 2 21 T able 2: SMART -AG Connector Pin-Out 3. T urn on the power supply to the SMAR T -AG (the SMAR T -AG cable is also a power cable). The power LED on the back of the receiver glow s red when the SMAR T -AG is properly powered. Figure 3: Simplified S MART -AG Setup Pin Use Pin Use 1 COM 1[...]

22 SMART -AG User Manual Rev 2 Chapter 2 Installation an d Setup  Minimum conductor size for all wiring is 0.5 mm / 20 A WG 2.1.2 Installing the PC Ut ilities Once the SMAR T -AG is connected to the PC/lap top and a power supply , install NovAtel ’ s PC Utilities . These include CDU , a graphical user interface program. 1. Start up the PC/lapt[...]

Installation and Setup Chapter 2 SMART -AG User Manual Rev 2 23 tape attached, or mounting hole s at each corner of the plate. 2.1.5 Mounting the SMAR T -AG The SMAR T -AG is a single-frequ ency GNSS receiver and antenna. When installing the SMAR T -AG: • Choose a location that has a clear view of the sky so th at each satellite above the horizon[...]

24 SMART -AG User Manual Rev 2 Chapter 2 Installation an d Setup T able 4: SMART -AG LED St atus Indicator s Flashing means that the LED is turning on and off at a 1 HZ rate - 0.5 seconds on and 0.5 seconds off. Debugging: • If the power is on but the yellow LED doesn’t flash within one minute, then no satellites are tracking. There may be exce[...]

Installation and Setup Chapter 2 SMART -AG User Manual Rev 2 25 2.2.4 Emulated Radar (ER) The SMAR T -AG outputs an emulated RADAR sign al via the bare wires labeled ER GND and ER_OUT on the SMAR T -AG cable. See T able 7 on Page 54 for the pin-out details of this cable. The ER outputs a logic hi gh of supply voltage-0 .5V minimum and logi c low of[...]

26 SMART -AG User M anual Rev 2 Chapter 3 Operation Before operating the SMAR T -AG for the first time, please ensure that you have followed th e installation instruct ions in Chapter 2, Installation and Setup starting on Page 20. The following instructions are based on a COM port configuration such as that shown in Figure 5 on Page 30 . It is assu[...]

Operation Chapter 3 SMART -AG User Manual Rev 2 27 3.1.2 Communicating Usi ng a Remote T erminal One method of communicating with the receiver is through a remote terminal. The receiver has been pre-wired to allow proper RS-232 interface with your d ata termin al. T o communicate with the terminal the receiver onl y requires the RX, TX, and GND lin[...]

28 SMART -AG User Manual Rev 2 Chapter 3 Operation Refer to CDU ’ s Help file by selecting the Help | Contents menu. Ensure you can see the Console and ASCII Messages windows by selecting them from the Vi e w menu. When the receiver is first turned on, no data is transmitted from the CO M ports except for the port prompt. The Console window displ[...]

Operation Chapter 3 SMART -AG User Manual Rev 2 29 and [carriage return] indicates that you shou ld press the <Enter> key . The above example illustrates co mmand input to the base receive r ’ s COM2 port, which sets the position of the base station receiver for dif feren tial operation. Confirmati on that the command was actually accepted [...]

30 SMART -AG User Manual Rev 2 Chapter 3 Operation Figure 5: Basic Differ ential Setup Reference Description 1 SMART -AG rece iver 2 User-supplied power su pply , for example a battery 3 User-supplied device to COM1 4 User-supplied radio device to COM2 5 User-supplied PC/laptop, for setting up and mon itoring, to COM1 System biases can introduce er[...]

Operation Chapter 3 SMART -AG User Manual Rev 2 31 3.3.1 Base S tation Configuration At the base station, ente r the following commands: interfacemode port rx_type tx_type [responses] fix position latitude long itude height log port message [trigger [period]] For example: RT C A interfacemode com2 none rtca off fix position 51.11358 042 -114.043580[...]

32 SMART -AG User Manual Rev 2 Chapter 3 Operation 3.3.2 Rover S tation Configuration At the rover station, enter: interfacemode port rx_type tx_type [responses] For example: RT C A interfacemode com2 rtca none off RT C M interfacemode com2 rtcm none off RT C M V 3 interfacemode com2 rtcmv3 none off CMR+ interfacemode com2 cmr none off CMR interfac[...]

Operation Chapter 3 SMART -AG User Manual Rev 2 33 pdpmode relative auto The following command is recommended to enable CAN: setcanname 305 NovAtel has registered manufactured ID code 3 05 with J1939. When complete, y our configuration can be saved with the SA VE CONFIG command. See the OEMV Family Firmware Refer ence Manual and APN-050 SMART -AG F[...]

34 SMART -AG User Manual Rev 2 Chapter 3 Operation for system debugging pu rposes. These variants have "DA T A" as part of their names (for example, R TCADA T A1, R TCMDA T A1, CMRDA T AOBS, and more). Refer also to the OEMV Firmware Refer ence Manual , which describes the various message formats in more detail.  Information on how to [...]

SMART -AG User Manual Rev 2 35 Chapter 4 PC Utilities V isit the Firmware and Software Updates section of the Nov Atel website, www .novatel.com , for the most recent versions of the PC software and receiver firmware. 4.1 CDU/Convert Inst allation The CD accompanying this manual contains the W indows applications CDU (Control and Display Unit) and [...]

36 SMART -AG User Manual Rev 2 Chapter 4 PC Utilities 4.2 CDU CDU is a 32-bit W indows applicatio n. The application provides a gr aphical user interface (GUI) to allow you to set-up and monitor the operation of the NovAtel receiver by providing a series of windows whose functional ity is explained in th is sectio n. A help file is included with CD[...]

PC Utilities Chapter 4 SMART -AG User Manual Rev 2 37 horizon to directly ov erhead, re spectively . The azimuth is mapped on a compass relative to true North. The colored rings indicate the lowest elevation cut-off angles at which satellites are tracked and can be changed or viewed via the button. Each of the satellites being track ed are represen[...]

38 SMART -AG User Manual Rev 2 Chapter 4 PC Utilities valid). Normally th is represents the latency in t he correction data. • The number of satellites used in the solut ion • The Solution Status • The receiver's date and time (GMT and local) Open this window by selectin g Position W indow from the V iew menu or its button in the W indow[...]

PC Utilities Chapter 4 SMART -AG User Manual Rev 2 39 subsequent positions, shown with a yellow + mark er , are given relative to this initial starting point. The current position is show n with a red + marker . The buttons at the top of the window provide op tions for controlling the plan display: • Zoom in or out of the Plan window • V iew al[...]

40 SMART -AG User Manual Rev 2 Chapter 4 PC Utilities This window auto matically opens when CDU is first connected to a rece iver . T o bring the window to the front, select Console Window from the V iew menu or click its button in the W indow T oolbar . • Logging Control W indow : The Logging Control window pr ovides a graphical interface for: ?[...]

PC Utilities Chapter 4 SMART -AG User Manual Rev 2 41 4.3 Convert Convert is a 32-bit W indows application and is shown in Figure 6 . Convert will accept GPS file formats and convert them to ASCII, Bina ry or Rine x format. The application al so allows the user to screen out particular logs by selecting the desired lo gs from the list of available [...]

42 SMART -AG User Manual Rev 2 Chapter 4 PC Utilities The Convert4 utility can be used to produce RINEX files from NovAte l receiver data files.  Although RINEX is intended to be a receiver - independent format, there are many optional records and fields. Please keep this in mi nd when combining NovAt el and non-NovAtel RINEX data. When converti[...]

PC Utilities Chapter 4 SMART -AG User Manual Rev 2 43 T able 6: NovAtel Logs for Rinex Convers ion 4.3.2 Convert Command Line Switches Convert4 supports several command-line switches to facilitate batch processing. T o access its Command Line Arguments window , open a command prompt window (select Accessories | Command Prompt from th e Start menu).[...]

44 SMART -AG User Manual Rev 2 Chapter 4 PC Utilities The name of the output file is the same as the input file when converting to ASCII or bin ary formats. The file extension, however , is altered to indicate the format of the data: *.asc for ASCII *.bin for binary When converting to RINEX, the output files are named according to the RINEX V ersio[...]

PC Utilities Chapter 4 SMART -AG User Manual Rev 2 45 various model features. Use this command when upgrading to a higher performance OEMV family model available within the sam e revision level as your current m odel (for ex ample, upgrading from a SMAR T -AG to a SMAR T -AG-ER on firmware versi on 3.600). This command only functio ns in conjunctio[...]

46 SMART -AG User Manual Rev 2 Chapter 4 PC Utilities Y ou will need at least 1 MB of av ailable space on your hard drive. For convenience, you may wish to copy this file to a GPS sub-directo ry (for example, C:GPSLOADER). The file is available in a com pressed format with passw ord protection; Customer Serv ice will provide you with the required[...]

PC Utilities Chapter 4 SMART -AG User Manual Rev 2 47 If you are running W inLoad for the first time you will need to make sure the file and comm unications settings are correct. Open a File to Download From the file menu choose Op en . Use the Open dialog to browse for your file, see Figure 9, W inLoad’ s Open Dialog on Page 47 . Figure 9: WinLo[...]

48 SMART -AG User Manual Rev 2 Chapter 4 PC Utilities Figure 1 1: COM Port Setup Downloading firmware T o download firmware follow these steps: 1. Set up the communications port as described in Communication s Settings above . 2. Select the file to download, see Open a File to Download on Page 47 . 3. Make sure the file path and file name are d isp[...]

PC Utilities Chapter 4 SMART -AG User Manual Rev 2 49 Figure 14: Upgrade Process Complete 8. Close W inLoad. This completes the procedure required to upgrade an OEMV family receiver .[...]

50 SMART -AG User M anual Rev 2 Appendix A T echnical S pecifications A.1 Smart-AG Receiver Performance PERFORMANCE (Subject To GPS System Characteristics) Position Accuracy a Standalon e: L1 1.8 m RMS SBAS b 0. 6 m R MS DGPS 0.45 m RMS RT-20 0.20 m RM S Pos t Pr oces sed 5 m m + 1 ppm RMS Time To First Fix Hot: 35 s (Al manac and rec ent ephemeris[...]

T echnical Specifications Appendix A SMART -AG User Manual Rev 2 51 A.2 SMART -AG S pecifications INPUT/OUTPUT CONNECTORS SMART-AG COM/PWR +8 to +36 V DC at 2.5 W (typical while logging) a For the cable pinouts and drawings, see Section A.2.1, SMART -AG Power/Communications Development kit Cable starting on Page 53 a. When tracking GPS satellites. [...]

52 SMAR T -AG User Manual Rev 2 Appendix A T echnical Specifications DIMENSIONS a a. All dimension are in millimeters, please use the Unit Conversion section of the GPS+ Refer ence Manual for conversion to other measurements. 155.0 155.3 66.8 26.94 21.85 26.94 26.94 26.94 31.21 #8-32 TH R E A D ED INSERT ( 4 PL .) Back of SMART -AG unit Fr ont of S[...]

T echnical Specifications Appendix A SMART -AG User Manual Rev 2 53 A.2.1 SMAR T -AG Power/Communicat ions Development kit Cable The SMAR T -AG cable that accompanies the SMAR T -AG , see Figure 15 below , pro vides a means of supplying power from a battery while operating in the fi eld. The exposed wires (red for positive and black for negative) c[...]

54 SMAR T -AG User Manual Rev 2 Appendix A T echnical Specifications T able 7: SMART -AG Cable Pinout s A.2.2 SMAR T -AG Connector and Cable Requirements Custom cables for installing your SMAR T -AG can be created using he following guidelines: • W ire size: must be 0.5 mm-1.25 mm (20-16 A WG) • Batt + connection must be protected by 5A fast bl[...]

T echnical Specifications Appendix A SMART -AG User Manual Rev 2 55 • Serial data signals (TxD, RxD, signal ground) must be run in shielded cable. Connect shiel ds to ground at SMAR T -AG end only • CAN signal conductors must be twisted (4 0 twists/m, 12 twists/ft) • Use only the recommended mati ng connectors li sted below . Use onl y gold p[...]

56 SMAR T -AG User Manual Rev 2 Appendix A T echnical Specifications T able 9: Recomme nded Fuse and Fuse Ho lders Fuse Recommended Fuse/Fuse Holder 12 V Fuse (standard size blade) A TO Blade Fuse 5A Littelfuse 0257005 Or Equivalent 12 V Fuse (mini size blade) Mini Blade Fuse 5A Littelfuse 0297005 Or Equivalent 24V Fuse (standard size blade) T AC A[...]

SMART -AG User Manual Rev 2 57 Appendix B Commands The SMAR T -AG firmware implements the commands in Ta b l e 1 0 , in addition to the OEMV family command set. The LOG command is available to all OEMV recei vers but is an essential command to do any logging. It is included in this appendix for yo ur convenience. T able 10: SMART -AG Commands in A [...]

58 SMAR T -AG User Manual Rev 2 Appendix B Commands B.2 FRESET Clear Selected Data from NVM and Reset The OEMV fr eset command is extended to include SMAR T -AG features. An additional target field, user data (value = 10), resets only the SMAR T -AG user data NVM, thereby resetting all parameters indicated in this document as “S tored in NVM” t[...]

Commands Appendix B SMART -AG User Manual Rev 2 59 B.3 LOG Request Logs from the Receiver Many different types of data can be logged using several different methods of triggering the lo g events. Every log element can be directed to any combination of the three COM ports and three USB ports. The ONTIME trigger opt ion requires the addition of the p[...]

60 SMAR T -AG User Manual Rev 2 Appendix B Commands Abbreviated ASCII Syntax:Message ID: 1 LOG [port] message [trigger [period [offset [hold]]]] Factory Default: log com1 rxstatuseventa onnew 0 0 hold log com2 rxstatuseventa onnew 0 0 hold log com3 rxstatuseventa onnew 0 0 hold log aux rxstatuseventa onnew 0 0 hold log usb1 rxstatuseventa onnew 0 0[...]

Commands Appendix B SMART -AG User Manual Rev 2 61 Field Field Name ASCII Value Description Field Type 1 LOG (ASCII) header - This field contains th e command name or the message header depending on whether the command is abbrevia ted ASCII or ASCII respectively. - 2 port See Table 12, Detailed Serial Port Identifie rs on Page 62 Output po rt (defa[...]

62 SMAR T -AG User Manual Rev 2 Appendix B Commands T able 12: Det ailed Serial Port Identifier s ASCII Port Name Hex Port Value Decimal Port Value a Description NO_PORTS 0 0 No ports specified COM1_ALL 1 1 All virtual ports for COM port 1 COM2_ALL 2 2 All virtual ports for COM port 2 COM3_ALL 3 3 All virtual ports for COM port 3 THISPORT_ALL 6 6 A[...]

Commands Appendix B SMART -AG User Manual Rev 2 63 THISPORT_31 df 223 Current COM port, virtual port 31 FILE c e0 c 224 c User-specified file destination, 0 c FILE_1 c e1 c 225 c User-specified file destinati on, 1 c . . . FILE_31 c ff c 255 c User-specified file destination, 31 c XCOM1 1a0 416 Virtual COM1 port, virtual port 0 XCOM1_1 1a1 417 Virt[...]

64 SMAR T -AG User Manual Rev 2 Appendix B Commands B.4 RADARCFG Configure the ER Output Use this command to configure th e Emulated Radar (ER) output. ER is available through the SMAR T - AG multi-cable, see Page 54 for pin-out details. Syntax radarcfg switch freq_step update_rate resp_mode threshold Message ID = 8192 Field Data Description Bytes [...]

Commands Appendix B SMART -AG User Manual Rev 2 65 T able 13: Respo nse Modes Example 1 to disable radar emulation: radarcfg disable 26.11 1 1 2 Example 2 to set the freque ncy step to 36.1 1 Hz/kph: radarcfg enable 36.11 1 1 2 Mode Description 2000 2000 ms The time period over which to smooth velocity samples 1000 1000 ms 500 500 ms (d efault) 2 A[...]

66 SMAR T -AG User Manual Rev 2 Appendix B Commands B.5 RESET Perform a Hardware Reset The OEMV re s e t command is extended to include SMAR T -AG features.[...]

SMART -AG User Manual Rev 2 67 Appendix C Logs The SMAR T -AG firm ware generates the logs in T able 14 , in addition to those of the OEMV Family log set. Refer to the OEMV Family Firmwar e Refer ence Ma nual , which also contain s procedures and explanations related to data logging and is availab le from our website at: http://www .novatel.com/ su[...]

68 SMAR T -AG User Manual Rev 2 Appendix C Logs C.1 RADARSIGNAL ER Signal and Position Information This log contains position and Emul ated Radar (ER) signal information. Message ID: 8193 Log Type: Asynch Recommended Input: log radarsignala onchanged ASCII Example 1 (stationary SMART -AG): #RADARSIGNALA,COM1,0,61.5,FINESTEERING,1501,248381.628,0000[...]

Logs Appendix C SMART -AG User Manual Rev 2 69 T able 15: Position or V elocity T ype Type (binary ) Type (ASCII) Description 0N O N E N o s o l u t i o n 1 FIXEDPOS Position has been fix ed by th e FIX POSITION command 2 FIXEDHEIGHT Position has be en fi xed by the FIX HEIGHT/AUTO comma nd 8 DOPPLER_VELOCITY Velocity computed using instantaneous D[...]

70 SMAR T -AG User Manual Rev 2 Appendix C Logs T able 16: Solution S t atus Solution Status Description (Binary) (ASCII) 0 SOL_COMPUTED Solution computed 1 INSUFFICIENT_OBS Insufficient observations 2 NO_CONVERGENCE No convergence 3 SINGULARITY Sin gularity at parameters matrix 4 COV_TRACE Covariance trace exceeds maximum (trace > 1000 m) 5 TES[...]

Logs Appendix C SMART -AG User Manual Rev 2 71 C.2 VERSION HW & SW V ersions and Serial Numbers The Component T ype of the VERSION log, refer to the OEMV Family Firmwar e Refer ence Manual , is extended to include SMAR T -AG information as in T a ble 17 . T able 17: Component T ype Binary Value a a. Unused numbers are reserved for future use. A[...]

72 SMART -AG User M anual Rev 2 Appendix D Replacement Part s The following are a list of the replacement parts available for your NovAte l SMAR T -AG receiver . Should you require assistance, or need to order addi tional components, please contact your local NovAtel dealer or Customer Service representative. D.1 SMART -AG D.2 Accessories  The a[...]

SMART -AG User Manual Rev 2 73 Index A accuracy position , 29 , 50 velocity , 50 almanac , 58 antenna internal , 18 mounting , 23 single-frequency , 23 specifications , 51 ascii , 41 AUTH command , 44 authorization , 45 AUX port , 63 B base station , 33 baseline , 29 baud rate , 26 bidirectional communication , 27 Bluetooth , 21 buffer , 26 , 59 C [...]

74 SMAR T -AG User Manual Rev 2 Index log , 59 – 60 NVM , 58 port , 23 , 26 start , 27 – 28 storage device , 30 terminal , 27 Warning , 29 DC power , 51 dealer , 15 , 44 default factory , 58 interface mode , 33 log , 60 offset , 61 period , 61 port , 23 , 26 , 59 – 61 reset , 58 trigger , 61 differential configuration note , 33 corrections , [...]

Index SMART -AG User Manual Rev 2 75 N note, logging , 59 Notices , 13 NovAtel Inc. , 2 , 15 O operation , 26 optionality , 17 output connector , 51 convention , 17 log , 59 – 61 status , 27 – 28 syntax , 57 overload , 59 P parity , 26 PC power setti ngs , 60 period , 59 , 61 port COM , 20 , 26 , 28 , 33 identifier , 62 – 63 interface mode , [...]

OM-20000123 Rev 2 2008/12/16[...]