Samsung 710M manuel d'utilisation

Driver Installation Pro g ram Installation SyncMaster 710V /910V /510M/710M/910M /712V[...]

Failure to follow dir ections no ted by this symbol could result in bodily harm or damage to equipment. Prohibite d Important to read and understand at all times Do not disassemble Disconnect the plug from the outl et Do not touch Grounding to prevent an electric shock[...]

If using a screen saver, set it to the acti ve screen mode. Do not use a damaged or loose plug. z This may cause an electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. z This may cause an electric shock or fire. Use only a properly ground ed plug and receptacle. z An improper ground may cause electric sho[...]

z This may cause damage to the product or human body. Place the monitor on a fl at and stable s urface . z The monitor can cause injury by falling. Set down the monitor carefully. z It could be damaged or broken. Do not place the monitor face down. z The CDT surface may be damaged. Installing a wall bracket must be done by a qualified professional.[...]

z This may cause damage, electric shock or a fire. Use the recommended detergen t with a smooth cloth. If the connector between the plug and the pin is dusty or dirty, clean it properly with a dry cloth. z A dirty connector can cause an electric shock or fir e. Contact a Service Center or Cu stomer Center for interior cle aning once a year. z Keep [...]

If the monitor is dropped or the casi ng is damaged, turn the monitor off and unplug the power cord. z The monitor may malfunction, causing an electric s hock or a fire. z Then contact the Service Center . Keep the power off when ther e is thunde r and l ightening ou tside, or let the monitor remain unused for an extended period of time. z The moni[...]

Do not insert metal objects such as ut ensils, wire or drill bits, or things that catch fire easily, such as pieces of paper or matches, into the vents or the headphone or A/V ports on the monitor. z This may cause malfunction, an electric shock or a fire. z Always contact the Service Center if foreign substances/objects enter into the monitor. If [...]

Please make sure th e following items are included wi th your monitor. If any items are miss ing, contact your dealer . Unpacking Monitor Monitor Bottom Hanger Manual Quick Setup Gu ide Warranty Ca rd User's Guide, Mon itor Dirver, Natural Color software, MagicTune™ software CD SyncMaster 710V /910V /712V[...]

D-Sub Cable Power Cord Front 1. Menu button [ ] Use this button to open the on-screen menu and exits from the menu screen or closes screen adjustment menu. 2. MagicBright™ button [ ] MagicBright™ is a new feature prov iding optimum viewing environment depending on the contents of the im age you are watching. Currently four different modes are a[...]

See Power Saver described in the manual for further information regarding power saving functions. For energy conservation, t urn your monitor OFF when it is not needed, or when leaving it unattended for long periods. Rear (The configuration at the back of the mo nitor may vary from product to product.) 1. Power port Connect the power cord for your [...]

Please make sure th e following items are included wi th your monitor. If any items are miss ing, contact your dealer . Unpacking Monitor Monitor Bottom Hanger Manual Quick Setup Gu ide Warranty Ca rd User's Guide, Mon itor Dirver, Natural Color software, MagicTune™ software CD SyncMaster 510M/710M/910M[...]

D-Sub Cable Power Cord Audio Cable Front 1. Menu button [ ] Use this button for open the on-s creen menu and exits from the menu screen or closes screen adjustment menu. 2. MagicBright™ button [ ] MagicBright™ is a new feature prov iding optimum viewing environment depending on the contents of the image you are watching. Currently four differen[...]

If this is the case, adjust the Brightness and Contrast by using t he OSD menu. 3. Power button [ ] / Power indicator Use this button for turn th e monitor on a nd off./ This light glows green during normal operation, and blinks green once as the monitor saves your adjustments. 4. Volume button [ ] When OSD is not on the screen, pu sh the butto n t[...]

1. Headphone connection te rminal [ ] 2. PC sound connection terminal Connect the audio cable fo r your monitor to the audio port on the back of your computer. See Connect ing Your Monito r for further information regarding cable connections.[...]

1. Connect the power cord for your mon itor to the power port on the back of the moni tor. Plug the power cord for the monitor into a near by outlet. 2-1. Using the D-sub (Analog) conne ctor on the vi deo card. Connect the signal cable to the 15-pin, D-su b connector on the back of your monitor. 2-2. Connected to a Macintosh. Connect the monitor to[...]

Monitor Assembly 1. Monitor and Bott om 2. Monitor and Hanger Attaching a base This monitor accepts a 100 mm x 100 mm VESA-compliant m ounting interface pad. A . Monitor B . Mounting interface pad 1 . Turn off your monitor and unplug its power cord. 2 . Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen.[...]

When prompted by the operating system for the monitor driver, insert the CD-RO M included with this monitor. D river installati on is slightly d ifferent from one oper ating system to another. Follow the directions as appropriate for the operating system you have. Prepare a blank disk and download the driver prog ram file at the Internet web site s[...]

4. If you can see following "Message" window, then click the "Continue Anyway " button. Then click "OK " button. 5. Monitor driver installation is compl eted. This monitor driver is under certifying MS logo,and this inst allation don't damage your system.The certified driver will be posted on Sa msung Monitor Home[...]

3. Click " Display " icon and choose the " Settings " tab then clic k " Advanced.. ". 4. Click the " Properties " button on the " Monitor " tab and select " Driver " tab. 5. Click " Update Driver.. " and select " Install from a list or.. " then click " Next " [...]

7. Click the " Browse " button then choose A:(D: Driver) and choose your monitor model in the model list and click the " Next " button. 8. If you can see following " Message " window, then click the " Continue Anyway " button. Then click " OK " button. This monitor driver is under certifying MS lo[...]

10. Monitor driver installat ion is completed. Microsoft ® Windows ® 2000 Operating System When you can see "Digital Signature Not Foun d" on your monitor , follow these steps . 1. Choose " OK " button on the " Insert disk " wind ow. 2. Click the " Browse " button on the " File Needed " win dow. 3[...]

1. Click Start , Settings , Cont rol Panel , and then double -click Display icon. 2. In Display Registration Infor mation window, click Settings Tab and then click All Display Modes . 3. Select a mode that you wish to use (Resolution, Number of colors and Vertical frequenc y) and then click OK . 4. Click Apply button if you see the screen working n[...]

1. Opens the OSD menu. Also used to exit the OSD menu or ret urn to the previous menu. 2. These buttons allow you to adjust items in the menu. 3. These buttons allow you to adjust items in the menu. 4. Activate a highlighted menu item. SyncMaster 710V /910V /712V[...]

Menu Description AUTO When the ' AUTO ' button is pressed, the Auto Adjustment screen appears as shown in the animated screen on the center. Auto adjustment allows the monitor to se lf-adjust to the incoming video signal. The values of fine, coarse and position are adjusted automatically. To make the automatic adjustment funct ion sharper[...]

Brightness Menu Description Brightness Adjust Brightness.[...]

Menu Description Play/Stop Brightness Adjust the Br ightness. Direct Access Feature : When OSD is not on the screen, Push the button to a djust brightnes s. Contrast Adjust the Contrast . Color Menu Description Play/Stop Color Tone The tone of the color can be changed and one of four modes can be selected - Cool, normal, Warm and Custom. Color Cont[...]

Menu Description Play/Stop Coarse Image is used to fine tune and get the best image by removing noises that creates unstable images with jitters and s himmers. If satisfactory result s are not obtained using the Fine adjustment, use the Coarse adj ustment and then use Fine again. Fine Image is used to fine tune and get the best image by removing no[...]

Menu Description Play/Stop Language Follow these steps to change th e language used in the menu. You can choose one of seven languages. (English, German, Spanish, French, Italian, Swedish, Russian) Note :The language chosen affects only the language of the OSD. It has no effect on any soft ware running on the computer. H-Position You can change the[...]

Menu Description Play/Stop Image Reset Image parameters are replaced wi th the fact ory default values. Color Reset Color parameters are r eplaced wi th the factory default valu es. Information Menu Description Information Shows a video source, display mode on the OSD screen. Setup[...]

1. Opens the OSD menu. Also used to exit the OSD menu or ret urn to the previous menu. 2. These buttons allow you to adjust items in the menu. 3. These buttons allow you to adjust items in the menu. 4. Activate a highlighted menu item. MagicTune™2.5 manual SyncMaster 510M/710M/910M[...]

Menu Description AUTO When the ' AUTO ' button is pressed, the Auto Adjustment screen appears as shown in the animated screen on the center. Auto adjustment allows the monitor to se lf-adjust to the incoming video signal. The values of fine, coarse and position are adjusted automatically. To make the automatic adjustment funct ion sharper[...]

- four different m ode (Custom /Text/I nternet/Ente rtain) Brightness Menu Description Brightness Adjust Brightness.[...]

Menu Description Play/Stop Brightness Adjust the Br ightness. Direct Access Feature : When OSD is not on the screen, Push the button to a djust brightnes s. Contrast Adjust the Contrast . Color Menu Description Play/Stop Color Tone The tone of the color can be changed and one of four modes can be selected - Cool, normal, Warm and Custom. Picture[...]

Color Control Follow these steps to adjust individual R,G,B color balance. Gamma Select one of three pre-defined gammas. Image Menu Description Play/Stop Coarse Removes no ise such as ve rtical stripes. Coarse adj ustment may move the screen image area. You may relocat e it to the center using the Horizontal Control menu. Fine Removes noise such as[...]

Menu Description Play/Stop Language Follow these steps to change th e language used in the menu. You can choose one of seven languages. (English, German, Spanish, French, Italian, Swedish, Russian) Note :The language chosen affects only the language of the OSD. It has no effect on any soft ware running on the computer. H-Position You can change the[...]

Menu Description Play/Stop Image Reset Image parameters are replaced wi th the fact ory default values. Color Reset Color parameters are r eplaced wi th the factory default valu es. Information Menu Description Information Shows a video source, display mode on the OSD screen. Setup[...]

Before calling for service, check t he information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the warranty card, the phone number on the Informatio n section or contact your dealer . Symptom Check List Solutions No images on the screen. I cannot turn on the monitor. Is [...]

one minute and then disappears. Please change to the recommended mode during this one-minute period. (The message is displayed again if the system is rebooted.) There is no image on the screen. Is the power indicator on the monitor blinking at 1 second intervals? The monitor is in PowerSaver mo de. Press a key on the keyboard or move the mouse to a[...]

driver and the monitor driver. 4. Check if the scanning ratio of the video screen is set at 75Hz. (Do not exceed 60Hz when using the maximum resolution.) 5. If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode, remove the Display Adapter at the " Control Panel → System → Device Adm inistrator "[...]

Failure of any of the boxes to appear indicates a problem with your monitor. This box also a ppears during normal operation if the video ca ble becomes disconnected or damaged. 4. Turn off your monitor and reconnect the video cable; then turn on both your co mputer an d the monitor. If your monitor screen remains blank after us ing the previous pro[...]

General General Model Name SyncMaster 710V LCD Panel Size 17" Diagonal Display area 337.92 (H) x 270.336 (V) Pixel Pitch 0.264mm (H) x 0.264mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 81 kHz Vertical 56 ~ 75 Hz Display Color 16,194,277 Colors Resolution Optimu m res oluti on 1280 x 1024@60 Hz Maximum resolution 1280 x 10[...]

Signal Cable 15pin-to-15pin D-sub cable, attatch Power Consumptio n(maximum) Less than 34W Dimensions (W xDxH)/ Weight 382.0 x 62.0 x 320.5 mm (Without Stand) 382.0 x 175.0 x 383.7 mm (with Basic Stand)/4.55kg VESA Mounting Interface 100mm x 100mm (for use with Spec ialty(Arm) Mounting hardware.) Environmental co nsiderations Operating Temperature:[...]

Preset Timing Modes If the signal tr ansferred fro m the comp uter is the same as the following Pr eset Timing Modes, the screen will be adjusted automatically. However, if the signal diffe rs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows. Table 1. Pr eset Timing Mode s Display M[...]

General General Model Name SyncMaster 910V LCD Panel Size 19" Diagonal Display area 376.32 (H) x 301.056 (V) Pixel Pitch 0.294mm (H) x 0.294mm (V) Type a-si TFT active matrix Synchronization Horizontal 31 ~ 81 kHz Vertical 56 ~ 75 Hz Display Color 16,194,277 Colors Resolution Optimu m res oluti on 1280 x 1024@60 Hz Maximum resolution 1280 x 10[...]

Signal Cable 15pin-to-15pin D-sub cable, attatch Power Consumptio n(maximum) Less than 38W Dimensions (W xDxH)/ Weight 428.0 X 61.8 X 356.0 mm (Without Stand) 428.0 X 195.7 X 430.0 mm (with Basic Stand)/4.8kg VESA Mounting Interface 100mm x 100mm (for use with Spec ialty(Arm) Mounting hardware.) Environmental co nsiderations Operating Temperature: [...]

Preset Timing Modes If the signal tr ansferred fro m the comp uter is the same as the following Pr eset Timing Modes, the screen will be adjusted automatically. However, if the signal diffe rs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows. Table 1. Pr eset Timing Mode s Display M[...]

General General Model Name SyncMaster 510M LCD Panel Size 15" Diagonal Display area 304.1 (H) x 228.1 (V) Pixel Pitch 0.297mm (H) x 0.297mm (V) Type a-si TFT active matrix Synchronization Horizontal 31 ~ 61 kHz Vertical 56 ~ 75 Hz Display Color 16,194,277 Colors Resolution Optimu m res oluti on 1024 x 768@60 Hz Maximum resolution 1024 x 768@75[...]

Signal Cable 15pin-to-15pin D-sub cable, attatch Power Consumptio n(maximum) Less than 34W Dimensions (W xDxH)/ Weight 353.9 X 57.0 X 304.7 mm (Without Stand) 353.9 X 175.0 X 344.7 mm (with Basic Stand)/4.8kg VESA Mounting Interface 100mm x 100mm (for use with Spec ialty(Arm) Mounting hardware.) Environmental co nsiderations Operating Temperature: [...]

meets the ENERGY STAR ® guidelines for energy efficiency. Preset Timing Modes If the signal tr ansferred fro m the comp uter is the same as the following Pr eset Timing Modes, the screen will be adjusted automatically. However, if the signal diffe rs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the [...]

Select Model Name General General Model Name SyncMaster 710M LCD Panel Size 17" Diagonal Display area 337.92 (H) x 270.336 (V) Pixel Pitch 0.264mm (H) x 0.264mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 81 kHz Vertical 56 ~ 75 Hz Display Color 16,194,277 Colors Resolution Opti mum res oluti on 1280 x 1024@60 Hz Maximum re[...]

Signal Cable 15pin-to-15pin D-sub cable, attatch Power Consumptio n(maximum) Less than 34W Dimensions (W xDxH)/ Weight 381.9 X 62.0 X 342.9 mm (Without Stand) 381.9 X 175.0 X 383.9 mm (with Basic Stand)/4.8kg VESA Mounting Interface 100mm x 100mm (for use with Spec ialty(Arm) Mounting hardware.) Environmental co nsiderations Operating Temperature: [...]

Preset Timing Modes If the signal tr ansferred fro m the comp uter is the same as the following Pr eset Timing Modes, the screen will be adjusted automatically. However, if the signal diffe rs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows. Table 1. Pr eset Timing Mode s Display M[...]

General General Model Name SyncMaster 910M LCD Panel Size 19" Diagonal Display area 376.32 (H) x 301.056 (V) Pixel Pitch 0.294mm (H) x 0.294mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 81 kHz Vertical 56 ~ 75 Hz Display Color 16,194,277 Colors Resolution Optimu m res oluti on 1280 x 1024@60 Hz Maximum resolution 1280 x 10[...]

Signal Cable 15pin-to-15pin D-sub cable, attatch Power Consumptio n(maximum) Less than 38W Dimensions (W xDxH)/ Weight 428.0 X 61.8 X 380.5 mm (Without Stand) 428.0 X 195.7 X 430.0 mm (with Basic Stand)/5.75kg VESA Mounting Interface 100mm x 100mm (for use with Spec ialty(Arm) Mounting hardware.) Environmental co nsiderations Operating Temperature:[...]

Preset Timing Modes If the signal tr ansferred fro m the comp uter is the same as the following Pr eset Timing Modes, the screen will be adjusted automatically. However, if the signal diffe rs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows. Table 1. Pr eset Timing Mode s Display M[...]

General General Model Name SyncMaster 712V LCD Panel Size 17" Diagonal Display area 337.92 (H) x 270.336 (V) Pixel Pitch 0.264mm (H) x 0.264mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 81 kHz Vertical 56 ~ 75 Hz Display Color 16,194,277 Colors Resolution Optimu m res oluti on 1280 x 1024@60 Hz Maximum resolution 1280 x 10[...]

Signal Cable 15pin-to-15pin D-sub cable, attatch Power Consumptio n(maximum) Less than 34W Dimensions (W xDxH)/ Weight 382.0 x 62.0 x 320.5 mm (Without Stand) 382.0 x 175.0 x 383.7 mm (with Basic Stand)/4.55kg VESA Mounting Interface 100mm x 100mm (for use with Spec ialty(Arm) Mounting hardware.) Environmental co nsiderations Operating Temperature:[...]

meets the ENERGY STAR ® guidelines for energy efficiency. Preset Timing Modes If the signal tr ansferred fro m the comp uter is the same as the following Pr eset Timing Modes, the screen will be adjusted automatically. However, if the signal diffe rs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the [...]

Service AUSTRALIA : Samsung E lectronics A ustrali a Pty Ltd. Customer Response Centre 7 Parkview Drive, Homebush Bay NSW 2127 Tel : 1300 362 603 http://www.samsung. com.au/ BRAZIL : Samsung Eletronica da Amazonia Ltda. R. Prof. Manoelito de Ornellas, 303, Terro B Chacara Sto. Antonio, CEP : 04719-040 Sao Paul o, SP SAC : 0800 124 421 http://www.sa[...]

ESPAÑA : Samsung Electronics Comercial Iberica, S.A. Ciencies, 55-65 (Poligono Pedrosa) 08908 Hospitalet de Llobregat (Bar celona) Tel. : (93) 261 67 00 Fax. : (93) 261 67 50 http://samsung.es/ FRANCE : SAMSUNG ELECTRONICS FRANCE Service Paris Nord 2 66 rue des Vanesses BP 50116 Villepinte 95950 Roissy CDG Cedex Tel : 08 25 08 65 65 Fax : 01 48 63[...]

NETHERLANDS/BELGIU M/LUXEMBOURG : Samsung Electronics Benelux B. V. Fleminglaan 12 2289 CP Ri jiswijk, NE DERLANDS Service and informatielijn ; Belgium :0800-95214, http://www .samsung .be/ Netherlands : 0800-2295214, http://www.sa msung.n l/ PANAMA : Samsung Electronics Latinoamerica( Z.L.) S. A. Calle 50 Edificio Plaza Credicorp, Planta Baja Pana[...]

UKRAINE : SAMSUNG ELECTRONICS REPRESE NTATIVE OFFICE IN UKRAINE 4 Glybochitska str. Kiev, Ukraine Tel. 8-044-4906878 Fax 8-044-4906887 Toll-free 8-800-502-0000 http://www.samsung. com.ua/ United Kingdom : Samsung Electronics (UK) Ltd. Samsung House, 225 Hook Rise South Surbiton, Su rrey KT6 7LD Tel. : (0208) 391 0168 Fax. : (0208) 397 9949 < Eur[...]

This is a function that provides the best quality sc reen for the user by allo wing the computer and the monitor to exchange information automatically. This monitor follows the international s tandard VESA DDC for the Plug & Play function. Resolution The number of horizontal and vertical dot s used to compose the screen imag e is called 'r[...]

V ideo Electronics Standard Association; the ENERGY STAR name and logo are regist ered trademarks of the U.S. Environmental Protecti on Agency (EPA). As an ENERGY STAR Partner, Samsung Electronics Co., Ltd. has determined that this product meets the ENERGY STAR guidelines for ener gy efficiency. All other product names mentioned herein may be the t[...]