JVC KD-SH1000 manuale d’uso

ENGLISH ESPAÑOL FRANÇAIS CD RECEIVER KD-SH1000 RECEPTOR CON CD KD-SH1000 RECEPTEUR CD KD-SH1000 For canceling the display demonstration, see page 8 Para cancelar la demostración en pantalla, consulte la página 8 Pour annuler la démonstration des affichages, référez-vous à la page 8 For installation and connections, refer to the separate man[...]

2 ENGLISH How to reset your unit • Your preset adjustments will also be erased. How to forcibly eject a disc • If an SD card is inserted, eject the SD card first (see page 11). 1 2 • If this does not work, reset your unit. • Be careful not to drop the disc when it ejects. Warning: If you need to operate the unit while driving, be sure to lo[...]

ENGLISH 3 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. How to read this manual • Button operations are mainly explained with the illustrations in the table below. • Some related tips and notes are [...]

4 ENGLISH How to enter the various menus The main menu contains seven menus (MODE, PSM, SEL, TITLE, BBE, EQ, DSP). • If no operation is done for about 5 seconds, menu screen is canceled. 1 2 Select a menu you want. 3 Enter the selected menu. • To go back to the previous screen or exit the MENU screen, press BACK repeatedly. 4 Operate as instruc[...]

ENGLISH 5 How to change the display information and patterns 1 BAND button 2 SOURCE button 3 • Control dial • POWER/ATT (attenuator)/ENTER button 4 MENU button 5 5 (up) / ∞ (down) buttons 6 Display window 7 DISP (display) button 8 USB (Universal Serial Bus) input terminal Parts identification Control panel 9 (angle) button p 0 (eject) button [...]

6 ENGLISH Remote controller — RM-RK300 Installing the lithium coin battery (CR2025) Aim the remote controller directly at the remote sensor on the unit. Make sure there is no obstacle in between. Warning: • Do not install any battery other than CR2025 or its equivalent; otherwise, it may explode. • Store the battery in a place where children [...]

ENGLISH 7 Continued on the next page • While listening to an Apple iPod ® or a JVC D. player: – Pauses/stops or resumes playback with ∞ . – Enters the main menu with 5 . (Now 5 / ∞ / 4 / ¢ work as the menu selecting buttons.) * 4 VOL (volume) + / – buttons Adjusts the volume level. 5 Number buttons • For FM/AM: Selects the preset st[...]

8 ENGLISH @ Adjust the sound as you want. (See pages 15 – 19.) To drop the volume in a moment (ATT) To restore the sound, press it again. To turn off the power Basic settings • See also “General settings — PSM” on pages 20 – 23. 1 Enter the PSM menu (see page 4). 2 1 Canceling the display demonstrations Select “Demo,” then “Off.?[...]

ENGLISH 9 When an FM stereo broadcast is hard to receive 1 Enter the MODE menu (see page 4). 2 3 4 MO indicator lights up. Reception improves, but stereo effect will be lost. To restore the stereo effect, repeat the same procedure and select “Off” in step 3 . The MO indicator goes off. Tuning in to FM stations with strong signals only—LO (loc[...]

10 ENGLISH 4 5 6 Select a preset number. • You can move to the lists of the other FM bands by turning the control dial. 7 Store the station. When using the remote controller After tuning in to a station you want to preset... Listening to a preset station 1 2 When using the remote controller Directly select the preset number. EN10-15_SH1000J_001A_[...]

11 ENGLISH Disc/SD card/USB memory operations Playing a disc in the unit All tracks will be played repeatedly until you change the source or eject the disc. To stop play and eject the disc Note: If a USB memory is attached to the unit, you cannot eject the disc. “Please Eject USB” flashes on the display. If this happens, detach the USB memory, [...]

12 ENGLISH ! Attach the control panel. ⁄ • The control panel goes back to the previous position. Playback starts automatically if tracks are recorded. Playing from a USB memory This unit can play MP3/WMA tracks stored in a USB memory. All tracks in the USB memory will be played repeatedly until you change the source. • Removing the USB memory[...]

13 ENGLISH To go to the next or previous tracks To go to the next or previous folders (only for MP3/WMA/SD/USB) For MP3 tracks: For WMA tracks: • Holding the buttons can display the Disc List ( ) and Folder List ( / / ), see the following. Other main functions Selecting a disc/folder/track on the list • This function is not available for an aud[...]

14 ENGLISH Prohibiting disc ejection You can lock a disc in the loading slot. 1 2 After making sure “No Eject?” is selected... • “No Eject” flashes, and the disc cannot be ejected. To cancel the prohibition, repeat the same procedure after making sure “Eject OK?” is selected. • “Eject OK” flashes on the display. Selecting the pl[...]

15 ENGLISH To make more precise settings, see the following. To cancel the acoustic effect, select “Defeat” in step Ÿ . Precise settings for the DSP modes 1 Select a DSP mode. 2 Select the number of the built-in speakers. • For “Defeat” and “V.Cancel,” the speaker number is fixed to “4ch.” 3 Select your listening seat position. 4[...]

16 ENGLISH 3 Finish the procedure. Using the equalizer—EQ You can adjust the sound equalization patterns to your preference by using either Graphic EQ or Parametric EQ. • Adjust the equalizer to match the reproducible frequency range of the connected speakers; otherwise, the adjustments may not be effective. Selecting preset sound modes— Grap[...]

17 ENGLISH 3 Select a band. Band1 : 20.0 Hz – 1.2 kHz Band2 : 80.0 Hz – 5.0 kHz Band3 : 315.0 Hz – 20 kHz 4 Adjust the enhanced level for the selected band. 5 Select the frequency. • Band 1/2/3 are required to be preset at least 5 steps (frequencies) away from each other. (Only selectable frequencies are shown on the display.) 6 Select the [...]

18 ENGLISH To cancel Crossover, repeat the same procedure. Make sure that “X-Over Off OK?” appears on the display. • indicator goes off. Setting the sound modes—SEL You can adjust the sound characteristics to your preference. ~ Enter the SEL menu (see page 4). Ÿ Select a setting item. * Appears only when crossover network is activated (see[...]

19 ENGLISH To adjust reproduced frequency level—X-Over This setting is available only when crossover network (see page 18) is activated. 1 Select a filter. HPF (Front/Rear) : Frequencies lower than the selected level are cut-off. LPF (Rear) : Frequencies higher than the selected level are cut-off. 2 Select “On” to activate the selected filter[...]

20 ENGLISH 3 Select or adjust the selected PSM item. 4 Repeat steps 2 and 3 to adjust the other PSM items if necessary. 5 Finish the procedure. You can change PSM (Preferred Setting Mode) items (except “Sirius ID”) listed in the table that follows. 1 Enter the PSM menu (see page 4). 2 Select a PSM item. General settings — PSM Indications Item[...]

21 ENGLISH Continued on the next page Indications Items Settings, [reference page] DST * 1 Daylight savings time • On [Initial] • Off : Activates daylight savings time if your residential area is subject to DST. : Cancels. Sirius ID * 3 SIRIUS ID : Your SIRIUS identification number appears on the display, [25]. Scroll * 4 • Once [Initial] •[...]

22 ENGLISH Indications Items Settings, [reference page] Beep Key-touch tone • On [Initial] • Off : Activates the key-touch tone. : Deactivates the key-touch tone. Ext In * 5 External input • Changer [Initial] • Ext In : To use a JVC CD changer, [18], a JVC compatible satellite (SIRIUS/ XM) tuner, [25], or an Apple iPod or a JVC D. player, [[...]

23 ENGLISH Selecting timer for the dimmer You can dim the display at night or as you set the timer. 1 Select “Dimmer” from the PSM menu. 2 Select “Time Set.” 3 Adjust the dimmer time. 1 Set the dimmer start time. 24Hours : [0 – 23] 12Hours : [1A (1AM) – 12A (12AM); 1P (1PM) – 12P (12PM)] 2 Set the dimmer end time. 24Hours : [0 – 23][...]

24 ENGLISH Title assignment You can assign titles to station frequencies, CDs (both in this unit and in the CD changer) and the external components (LINE-IN and EXT-IN). Sources Maximum number of characters Station frequencies Up to 16 characters (up to 30 station frequencies including both FM and AM) CDs/CD-CH * Up to 32 characters (up to 30 discs[...]

25 ENGLISH Satellite radio operations This unit is satellite (SAT) Radio Ready— compatible with both SIRIUS Satellite radio and XM Satellite radio. Before operating your satellite radio: • For connection, see Installation/Connection Manual (separate volume). • Refer also to the Instructions supplied with your SIRIUS Satellite radio or XM Sate[...]

26 ENGLISH Listening to the XM Satellite radio 1 2 3 Select a channel for listening. Holding the button changes the channels rapidly. Searching for category/channel You can search for programs by category (Category Search) or channel number (Channel Search). • In Category Search, you can tune in to the channels of the selected category. Category [...]

27 ENGLISH 5 6 Select a user preset number. • You can move to the lists of the other SIRIUS bands by turning the control dial. 7 Store the channel. Listening to a user preset channel 1 2 • Holding this button displays the User Preset Channel List (see step 6 above). 3 Perform steps 3 to 6 (on the left column) to select a user preset channel. 4 [...]

28 ENGLISH Selecting a category/channel on the list Selecting a category from the list 1 Enter the MODE menu (see page 4). 2 Select “Category.” 3 4 Select a category you want. • You can move to the other lists b y turning the control dial. 5 Finish the procedure. The first channel of the selected category is tuned in. • If you select the cu[...]

29 ENGLISH iPod®/D. player operations This unit is ready for operating an Apple iPod or a JVC D. player from the control panel. Before operating your iPod or D. player: Connect either one of the following (separately purchased) to the CD changer jack on the rear of this unit. • Interface adapter for iPod ® —KS-PD100 for controlling an iPod. ?[...]

30 ENGLISH Selecting a track from the menu 1 Enter the main menu. Now the 5 / ∞ / 4 / ¢ buttons work as the menu selecting buttons * . * The menu selecting mode will be canceled: – If no operations are done for about 5 seconds. – When you confirm the selection of a track. 2 Select the desired menu. For iPod: Playlists Ô Artists Ô Albums Ô[...]

31 ENGLISH Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors. Moisture condensation Moisture may condense on the lens inside the CD player in the fol[...]

32 ENGLISH To keep discs clean A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge. • Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc.) to clean discs. To play new discs New discs may have some rough spots around the inner[...]

33 ENGLISH General • This unit has been designed to reproduce CDs/CD Texts, and CD-Rs (Recordable)/ CD-RWs (Rewritable) in audio CD (CD-DA) and MP3/WMA format; MP3/WMA files recorded in an SD card or a USB memory. • While playing an audio CD: If a title has been assigned to the audio CD (see page 24), it will be shown on the display. • While [...]

34 ENGLISH • This unit can play back the files recorded in VBR (variable bit rate). Files recorded in VBR have a discrepancy in elapsed time display, and do not show the actual elapsed time. Especially, after performing the search function, this difference becomes noticeable. • This unit can recognize a total of 512 files, of 200 folders, and o[...]

35 ENGLISH Changing the source • If you change the source, playback also stops. Next time you select the same source again, playback starts from where it has been stopped previously. Ejecting a disc • If the ejected disc is not removed within 15 seconds, the disc is automatically inserted again into the loading slot to protect it from dust. (Di[...]

36 ENGLISH Title assignment • If you try to assign titles to more than 30 station frequencies or 30 discs, “Name Full” appears. Delete unwanted titles before assignment. • Titles assigned to discs in the CD changer can also be shown if you play back the disc in the unit and vice versa. Satellite radio operations • You can also connect the[...]

ENGLISH 37 Available characters In addition to the Roman alphabets (A – Z, a – z), the following characters will be used. Accented letters: upper case Accented letters: lower case Preset frequency level settings for each sound mode Sound mode Preset equalizing value 63 Hz 125 Hz 250 Hz 500 Hz 1 kHz 2 kHz 4 kHz 8 kHz 12.5 kHz Flat 00 00 00 00 00[...]

38 ENGLISH Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. • The unit does not work at all. Reset the unit (see page 2). • “Connect Error” appears on the display. Remove the control panel, wipe the connector, then attach it again ([...]

ENGLISH 39 Continued on the next page Symptoms Remedies/Causes MP3/WMA playback • A longer readout time is required (“File Check” keeps flashing on the display). Do not use too many hierarchies and folders. • Tracks do not play back in the order you have intended them to play. Playback order is determined when the files are recorded. • El[...]

40 ENGLISH Symptoms Remedies/Causes CD changer • “No Disc” appears on the display. Insert a disc into the magazine. • “No Magazine” appears on the display. Insert the magazine. • “Reset 8” appears on the display. Connect this unit and the CD changer correctly and press the reset button of the CD changer. • “Reset 1” – “R[...]

ENGLISH 41 Symptoms Remedies/Causes Satellite radio • “LOADING” appears on the display while listening to the XM Satellite radio. Select another channel or continue listening to the previous channel. • “Reset 08” appears on the display. The unit is loading the channel information and audio. Text information are temporarily unavailable. [...]

42 ENGLISH Specifications AUDIO AMPLIFIER SECTION Power Output: 20 W RMS × 4 Channels at 4 Ω and ≤ 1% THD+N Signal to Noise Ratio: 80 dBA (reference: 1 W into 4 Ω ) Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Equalizer Control Range: Frequencies: Graphic EQ: 63 Hz, 125 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz, 12.5 kHz (9 bands) P[...]

ENGLISH 43 CD PLAYER SECTION Type: Compact disc player Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: 5 Hz to 20 000 Hz Dynamic Range: 98 dB Signal-to-Noise Ratio: 102 dB Wow and Flutter: Less than measurable limit MP3: Bit Rate: 32 kbps – 320 kbps Sampling Fre[...]

Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Still having trouble?? USA ONLY Call 1-800-252-5722 http://www.jvc.com We can help you! EN, SP, FR 0206DTSMDTJEIN © 2006 Victor Company of Japan, Limited Rear_SH1000J_001A_2.indd 2 Rear_SH1000J_001A_2.indd 2 1/17/06 10:56:31 AM 1/17/06 10:56:31 AM[...]

1 KD-SH1000 Installation/Connection Manual Manual de instalación/conexión Manuel d’installation/raccordement GET0364-002A [J] J Handles Manijas Poignées F Washer (ø5) Arandela (ø5) Rondelle (ø5) G Lock nut (M5) Tuerca de seguridad (M5) Ecrou d’arrêt (M5) H Mounting bolt—M5 × 20 mm (M5 × 13/16") Perno de montaje—M5 × 20 mm (M5[...]

INSTALLATION (IN-DASH MOUNTING) The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC car audio dealer or a company supplying kits. • If you are not sure how to install this unit correctly, have it installed by a qualified technician. Removing the un[...]

3 LINE IN (see diagram / véase el diagrama / voir le diagramme ) A Typical connections / Conexiones tipicas / Raccordements typiques Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit. The leads of the power cord and those of the connector from the car body may be different in c[...]

4 Connecting the external amplifiers and/or subwoofer / Conexión de los amplificadores y/o subwoofer externos / Connexion d’amplificateurs extérieurs et/ou d’un caisson de grave You can connect amplifiers to upgrade your car stereo system. • Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that i[...]

You can enjoy a world of “pure audio” in your car by connecting 3- way network speaker system (high-range/mid-range/subwoofer). IMPORTANT: If you have installed the 3-way network speaker system in the car, make sure of the following. • Connect the speaker system as illustrated below. • Before using the system, activate crossover network and[...]

6 Other external component / Otro componente externo / Autre appareil extérieur CD changer jack Jack para el cambiador de CD Prise du changeur CD * 9 Line Input Adapter KS-U57 (not supplied for this unit) * 9 Adaptador de entrada de línea KS-U57 (no suministrado con esta unidad) * 9 Adaptateur d’entrée de ligne KS-U57 (non fourni avec cet appa[...]

ENGLISH For canceling the display demonstration, see page 8. For installation and connections, refer to the separate manual. INSTRUCTIONS GET0365-001A [U/UH] KD-SH1000 CD RECEIVER KD-SH1000 Cover_SH1000U_001A_2.indd 2 Cover_SH1000U_001A_2.indd 2 1/6/06 3:00:40 PM 1/6/06 3:00:40 PM[...]

2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; [...]

ENGLISH 3 How to read this manual • Button operations are mainly explained with the illustrations in the table below. • Some related tips and notes are explained in “More about this unit” (see pages 27 – 31). Press briefly. Press repeatedly. Press either one. Press A , then B . Press and hold until your desired response begins. Press and [...]

4 ENGLISH How to enter the various menus The main menu contains seven menus (MODE, PSM, SEL, TITLE, BBE, EQ, DSP). • If no operation is done for about 5 seconds, menu screen is canceled. 1 2 Select a menu you want. 3 Enter the selected menu. • To go back to the previous screen or exit the MENU screen, press BACK repeatedly. 4 Operate as instruc[...]

ENGLISH 5 How to change the display information and patterns 1 BAND button 2 SOURCE button 3 • Control dial • POWER/ATT (attenuator)/ENTER button 4 MENU button 5 5 (up) / ∞ (down) buttons 6 Display window 7 DISP (display) button 8 USB (Universal Serial Bus) input terminal Parts identification Control panel 9 (angle) button p 0 (eject) button [...]

6 ENGLISH Remote controller — RM-RK300 Installing the lithium coin battery (CR2025) Aim the remote controller directly at the remote sensor on the unit. Make sure there is no obstacle in between. Warning: • Do not install any battery other than CR2025 or its equivalent; otherwise, it may explode. • Store the battery in a place where children [...]

ENGLISH 7 Continued on the next page 3 5 (up) / ∞ (down) buttons • For FM/AM: Changes the preset stations. • For MP3/WMA/SD/USB: Changes the folders. • While listening to an Apple iPod ® or a JVC D. player: – Pauses/stops or resumes playback with ∞ . – Enters the main menu with 5 . (Now 5 / ∞ / 4 / ¢ work as the menu selecting but[...]

8 ENGLISH To drop the volume in a moment (ATT) To restore the sound, press it again. To turn off the power Basic settings • See also “General settings — PSM” on pages 20 – 22. 1 Enter the PSM menu (see page 4). 2 1 Canceling the display demonstrations Select “Demo,” then “Off.” 2 Setting the clock Select “Clock H” (hour), then[...]

ENGLISH 9 4 MO indicator lights up. Reception improves, but stereo effect will be lost. To restore the stereo effect, repeat the same procedure and select “Off” in step 3 . The MO indicator goes off. Tuning in to FM stations with strong signals only—LO (local)/DX (Distance- Extreme) 1 Enter the MODE menu (see page 4). 2 3 4 DX indicator goes [...]

10 ENGLISH 4 5 6 Select a preset number. • You can move to the lists of the other FM bands by turning the control dial. 7 Store the station. When using the remote controller After tuning in to a station you want to preset... Listening to a preset station 1 2 When using the remote controller Directly select the preset number. EN10-15_SH1000U_001A_[...]

11 ENGLISH Disc/SD card/USB memory operations Playing a disc in the unit All tracks will be played repeatedly until you change the source or eject the disc. To stop play and eject the disc Note: If a USB memory is attached to the unit, you cannot eject the disc. “Please Eject USB” flashes on the display. If this happens, detach the USB memory, [...]

12 ENGLISH ! Attach the control panel. ⁄ • The control panel goes back to the previous position. Playback starts automatically if tracks are recorded. Playing from a USB memory This unit can play MP3/WMA tracks stored in a USB memory. All tracks in the USB memory will be played repeatedly until you change the source. • Removing the USB memory[...]

13 ENGLISH To go to the next or previous tracks To go to the next or previous folders (only for MP3/WMA/SD/USB) For MP3 tracks: For WMA tracks: • Holding the buttons can display the Disc List ( ) and Folder List ( / / ), see the following. Other main functions Selecting a disc/folder/track on the list • This function is not available for an aud[...]

14 ENGLISH Prohibiting disc ejection You can lock a disc in the loading slot. 1 2 After making sure “No Eject?” is selected... • “No Eject” flashes, and the disc cannot be ejected. To cancel the prohibition, repeat the same procedure after making sure “Eject OK?” is selected. • “Eject OK” flashes on the display. Selecting the pl[...]

15 ENGLISH To make more precise settings, see the following. To cancel the acoustic effect, select “Defeat” in step Ÿ . Precise settings for the DSP modes 1 Select a DSP mode. 2 Select the number of the built-in speakers. • For “Defeat” and “V.Cancel,” the speaker number is fixed to “4ch.” 3 Select your listening seat position. 4[...]

16 ENGLISH 3 Finish the procedure. Using the equalizer—EQ You can adjust the sound equalization patterns to your preference by using either Graphic EQ or Parametric EQ. • Adjust the equalizer to match the reproducible frequency range of the connected speakers; otherwise, the adjustments may not be effective. Selecting preset sound modes— Grap[...]

17 ENGLISH 3 Select a band. Band1 : 20.0 Hz – 1.2 kHz Band2 : 80.0 Hz – 5.0 kHz Band3 : 315.0 Hz – 20 kHz 4 Adjust the enhanced level for the selected band. 5 Select the frequency. • Band 1/2/3 are required to be preset at least 5 steps (frequencies) away from each other. (Only selectable frequencies are shown on the display.) 6 Select the [...]

18 ENGLISH Activating crossover network By activating crossover network, you can allocate different frequency range of sound signals to different speakers to match their characteristic. If you have installed the 3-way network speaker system in the car, make sure of the following: • Before using the system, activate crossover network and preset th[...]

19 ENGLISH To adjust reproduced frequency level—X-Over This setting is available only when crossover network (see page 18) is activated. 1 Select a filter. HPF (Front/Rear) : Frequencies lower than the selected level are cut-off. LPF (Rear) : Frequencies higher than the selected level are cut-off. 2 Select “On” to activate the selected filter[...]

20 ENGLISH 3 Select or adjust the selected PSM item. 4 Repeat steps 2 and 3 to adjust the other PSM items if necessary. 5 Finish the procedure. You can change PSM (Preferred Setting Mode) items listed in the table that follows. 1 Enter the PSM menu (see page 4). 2 Select a PSM item. General settings — PSM Indications Items Settings, [reference pa[...]

21 ENGLISH Indications Items Settings, [reference page] Bright Display brightness 1 – 10 [Initial: 8] : Adjust the display contrast to make the display indications clear and legible. (If “Dimmer” is set to “On,” selecting “1” to “4“ takes no effect.) ID3 Tag Tag display • On [Initial] • Off : Shows the Tag information while pl[...]

22 ENGLISH Selecting timer for the dimmer You can dim the display at night or as you set the timer. 1 Select “Dimmer” from the PSM menu. 2 Select “Time Set.” 3 Adjust the dimmer time. 1 Set the dimmer start time. 24Hours : [0 – 23] 12Hours : [1A (1AM) – 12A (12AM); 1P (1PM) – 12P (12PM)] 2 Set the dimmer end time. 24Hours : [0 – 23][...]

23 ENGLISH Title assignment You can assign titles to station frequencies, CDs (both in this unit and in the CD changer) and the external components (LINE-IN and EXT-IN). Sources Maximum number of characters Station frequencies Up to 16 characters (up to 30 station frequencies including bothe FM and AM) CDs/CD-CH * Up to 32 characters (up to 30 disc[...]

24 ENGLISH iPod®/D. player operations This unit is ready for operating an Apple iPod or a JVC D. player from the control panel. Before operating your iPod or D. player: Connect either one of the following (separately purchased) to the CD changer jack on the rear of this unit. • Interface adapter for iPod ® —KS-PD100 for controlling an iPod. ?[...]

25 ENGLISH Selecting a track from the menu 1 Enter the main menu. Now the 5 / ∞ / 4 / ¢ buttons work as the menu selecting buttons * . * The menu selecting mode will be canceled: – If no operations are done for about 5 seconds. – When you confirm the selection of a track. 2 Select the desired menu. For iPod: Playlists Ô Artists Ô Albums Ô[...]

26 ENGLISH Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors. Moisture condensation Moisture may condense on the lens inside the CD player in the fol[...]

27 ENGLISH To keep discs clean A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge. • Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc.) to clean discs. To play new discs New discs may have some rough spots around the inner[...]

28 ENGLISH General • This unit has been designed to reproduce CDs/CD Texts, and CD-Rs (Recordable)/ CD-RWs (Rewritable) in audio CD (CD-DA) and MP3/WMA format; MP3/WMA files recorded in an SD card or a USB memory. • While playing an audio CD: If a title has been assigned to the audio CD (see page 23), it will be shown on the display. • While [...]

29 ENGLISH • This unit can recognize a total of 512 files, of 200 folders, and of 8 hierarchies. • This unit cannot play back the following files: – MP3 files encoded with MP3i and MP3 PRO format. – MP3 files encoded in an inappropriated format. – MP3 files encoded with Layer 1/2. – WMA files encoded with lossless, professional, and voi[...]

30 ENGLISH Sound adjustments Selecting the DSP modes—DSP • Effectiveness of “V.Cancel” depends on the recording condition of the sources: – Monaural sources such as AM and monaural FM broadcasting programs. – Multiplex sound sources. – Sources recorded with duets, strong echo, a chorus, or only a few instruments. • When “4ch” is[...]

ENGLISH 31 Available characters In addition to the Roman alphabets (A – Z, a – z), the following characters will be used. Accented letters: upper case Accented letters: lower case Preset frequency level settings for each sound mode Sound mode Preset equalizing value 63 Hz 125 Hz 250 Hz 500 Hz 1 kHz 2 kHz 4 kHz 8 kHz 12.5 kHz Flat 00 00 00 00 00[...]

32 ENGLISH Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. • The unit does not work at all. Reset the unit (see page 2). • “Connect Error” appears on the display. Remove the control panel, wipe the connector, then attach it again ([...]

ENGLISH 33 Continued on the next page Symptoms Remedies/Causes MP3/WMA playback • Disc cannot be played back. • Use a disc with MP3/WMA tracks recorded in the format compliant with ISO 9660 Level 1, Level 2, Romeo, or Joliet. • Add the extension code <.mp3> or <.wma> to the file names. • Noise is generated. Skip to another track[...]

34 ENGLISH Symptoms Remedies/Causes SD card/USB memory playback • “SD Loading Error” appears on the display while playing tracks from an SD card. Detach the control panel and reinsert the SD card. The control panel goes back to initial position (Angle 1). • While playing a track, sound is sometimes interrupted. MP3/WMA tracks have not been [...]

ENGLISH 35 Symptoms Remedies/Causes iPod/D. player playback • No sound can be heard when connecting an iPod nano. Disconnect the headphones from the iPod nano. • No sound can be heard. • “ERROR 01” appears on the display when connecting a D. player. Disconnect the adapter from the D. player. Then, connect it again. • “No Files” or ?[...]

36 ENGLISH Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Equalizer Control Range: Frequencies: Graphic EQ: 63 Hz, 125 H[...]

ENGLISH 37 CD PLAYER SECTION MP3: Bit Rate: 32 kbps – 320 kbps Sampling Frequency: MPEG-1: 48 kHz, 44.1 kHz, 33 kHz MPEG-2: 24 kHz, 22.05 kHz, 16 kHz WMA: Bit Rate: 8 kbps – 320 kbps Sampling Frequency: 48 kHz, 44.1 kHz, 32 kHz SD CARD Format: FAT 12/16 Storage: 8 MB – 512 MB Playable Audio Format: MP3/WMA MP3: Bit Rate: 8 kbps – 320 kbps S[...]

© 2006 Victor Company of Japan, Limited EN, TH 0206DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Rear_SH1000U_001A_3.indd 2 Rear_SH1000U_001A_3.indd 2 1/16/06 6:00:04 PM 1/16/06 6:00:04 PM[...]

KD-SH1000 Installation/Connection Manual °“√µ‘¥µ—Èß/§ŸË¡◊Õ°“√µ‘¥µ—Èß 0206DTSMDTJEIN EN, TH 1 ENGLISH This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems . If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC car audio dealers. J Handle[...]

INSTALLATION (IN-DASH MOUNTING) The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC car audio dealer or a company supplying kits. • If you are not sure how to install this unit correctly, have it installed by a qualified technician. Removing the un[...]

ELECTRICAL CONNECTIONS °“√‡™◊ËÕ¡‚¥¬„™È ‰øøÈ“ A Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit. The leads of the power cord and those of the connector from the car body may be different in color. 1 Connect the colored leads of the power cord in th[...]

4 Connecting the external amplifiers and/or subwoofer / µËÕ·Õ¡æ≈‘ø“¬‡ÕÕ√Ï·≈– / À√◊Õ´—∫«Ÿø‡øÕ√ϥȓππÕ° You can connect amplifiers to upgrade your car stereo system. • Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled throug[...]

5 §ÿ≥“¡“√∂‡æ≈‘¥‡æ≈‘π°—∫‚≈°¢Õß “√–∫∫‡’¬ß¡∫Ÿ√≥Ï·∫∫” „π√∂¬πµÏ‰¥È ¥È«¬°“√µËÕ√–∫∫≈”‚æß“¡∑‘»∑“ß (æ‘—¬Ÿß/æ‘—¬°≈“ß/´—∫«øŸ‡Õ√) ¢ÈÕ§«√∑√“∫∑’Ë  ”§—?[...]

6 Other external component / Õÿª°√≥Ï¿“¬πÕ°Õ◊ËπÊ * 8 AUX Input Adapter KS-U58 (not supplied for this unit) * 8 Õ–·¥ª‡µÕ√Ï√—∫—≠≠“≥ AUX √ÿËπ KS-U58 (‰¡Ë‰¥È„ÀÈ¡“°—∫™ÿ¥ª√–°Õ∫π’È) • Set “Ext In” for the external input setting (See page 21 of the INSTRUCT[...]

ENGLISH INDONESIA CD RECEIVER KD-SH1000 ALA T PENERIMA CD KD-SH1000 For canceling the display demonstration, see page 8. U nt uk membatalka n tampila n demonstrasi, liha t halaman 8. For installation and connections, refer to the separate manual. Untuk instalasi dan penyambungan, lihat buku pedoman terpisah. INSTRUCTIONS BUKU PETUNJUK GET0365-004A [...]

2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; [...]

ENGLISH 3 How to read this manual • Button operations are mainly explained with the illustrations in the table below. • Some related tips and notes are explained in “More about this unit” (see pages 27 – 31). Press briefly. Press repeatedly. Press either one. Press A , then B . Press and hold until your desired response begins. Press and [...]

4 ENGLISH How to enter the various menus The main menu contains seven menus (MODE, PSM, SEL, TITLE, BBE, EQ, DSP). • If no operation is done for about 5 seconds, menu screen is canceled. 1 2 Select a menu you want. 3 Enter the selected menu. • To go back to the previous screen or exit the MENU screen, press BACK repeatedly. 4 Operate as instruc[...]

ENGLISH 5 How to change the display information and patterns 1 BAND button 2 SOURCE button 3 • Control dial • POWER/ATT (attenuator)/ENTER button 4 MENU button 5 5 (up) / ∞ (down) buttons 6 Display window 7 DISP (display) button 8 USB (Universal Serial Bus) input terminal Parts identification Control panel 9 (angle) button p 0 (eject) button [...]

6 ENGLISH Remote controller — RM-RK300 Installing the lithium coin battery (CR2025) Aim the remote controller directly at the remote sensor on the unit. Make sure there is no obstacle in between. Warning: • Do not install any battery other than CR2025 or its equivalent; otherwise, it may explode. • Store the battery in a place where children [...]

ENGLISH 7 Continued on the next page 3 5 (up) / ∞ (down) buttons • For FM/AM: Changes the preset stations. • For MP3/WMA/SD/USB: Changes the folders. • While listening to an Apple iPod ® or a JVC D. player: – Pauses/stops or resumes playback with ∞ . – Enters the main menu with 5 . (Now 5 / ∞ / 4 / ¢ work as the menu selecting but[...]

8 ENGLISH To drop the volume in a moment (ATT) To restore the sound, press it again. To turn off the power Basic settings • See also “General settings — PSM” on pages 20 – 22. 1 Enter the PSM menu (see page 4). 2 1 Canceling the display demonstrations Select “Demo,” then “Off.” 2 Setting the clock Select “Clock H” (hour), then[...]

ENGLISH 9 4 MO indicator lights up. Reception improves, but stereo effect will be lost. To restore the stereo effect, repeat the same procedure and select “Off” in step 3 . The MO indicator goes off. Tuning in to FM stations with strong signals only—LO (local)/DX (Distance- Extreme) 1 Enter the MODE menu (see page 4). 2 3 4 DX indicator goes [...]

10 ENGLISH 4 5 6 Select a preset number. • You can move to the lists of the other FM bands by turning the control dial. 7 Store the station. When using the remote controller After tuning in to a station you want to preset... Listening to a preset station 1 2 When using the remote controller Directly select the preset number. EN10-15_SH1000U_001A_[...]

11 ENGLISH Disc/SD card/USB memory operations Playing a disc in the unit All tracks will be played repeatedly until you change the source or eject the disc. To stop play and eject the disc Note: If a USB memory is attached to the unit, you cannot eject the disc. “Please Eject USB” flashes on the display. If this happens, detach the USB memory, [...]

12 ENGLISH ! Attach the control panel. ⁄ • The control panel goes back to the previous position. Playback starts automatically if tracks are recorded. Playing from a USB memory This unit can play MP3/WMA tracks stored in a USB memory. All tracks in the USB memory will be played repeatedly until you change the source. • Removing the USB memory[...]

13 ENGLISH To go to the next or previous tracks To go to the next or previous folders (only for MP3/WMA/SD/USB) For MP3 tracks: For WMA tracks: • Holding the buttons can display the Disc List ( ) and Folder List ( / / ), see the following. Other main functions Selecting a disc/folder/track on the list • This function is not available for an aud[...]

14 ENGLISH Prohibiting disc ejection You can lock a disc in the loading slot. 1 2 After making sure “No Eject?” is selected... • “No Eject” flashes, and the disc cannot be ejected. To cancel the prohibition, repeat the same procedure after making sure “Eject OK?” is selected. • “Eject OK” flashes on the display. Selecting the pl[...]

15 ENGLISH To make more precise settings, see the following. To cancel the acoustic effect, select “Defeat” in step Ÿ . Precise settings for the DSP modes 1 Select a DSP mode. 2 Select the number of the built-in speakers. • For “Defeat” and “V.Cancel,” the speaker number is fixed to “4ch.” 3 Select your listening seat position. 4[...]

16 ENGLISH 3 Finish the procedure. Using the equalizer—EQ You can adjust the sound equalization patterns to your preference by using either Graphic EQ or Parametric EQ. • Adjust the equalizer to match the reproducible frequency range of the connected speakers; otherwise, the adjustments may not be effective. Selecting preset sound modes— Grap[...]

17 ENGLISH 3 Select a band. Band1 : 20.0 Hz – 1.2 kHz Band2 : 80.0 Hz – 5.0 kHz Band3 : 315.0 Hz – 20 kHz 4 Adjust the enhanced level for the selected band. 5 Select the frequency. • Band 1/2/3 are required to be preset at least 5 steps (frequencies) away from each other. (Only selectable frequencies are shown on the display.) 6 Select the [...]

18 ENGLISH Activating crossover network By activating crossover network, you can allocate different frequency range of sound signals to different speakers to match their characteristic. If you have installed the 3-way network speaker system in the car, make sure of the following: • Before using the system, activate crossover network and preset th[...]

19 ENGLISH To adjust reproduced frequency level—X-Over This setting is available only when crossover network (see page 18) is activated. 1 Select a filter. HPF (Front/Rear) : Frequencies lower than the selected level are cut-off. LPF (Rear) : Frequencies higher than the selected level are cut-off. 2 Select “On” to activate the selected filter[...]

20 ENGLISH 3 Select or adjust the selected PSM item. 4 Repeat steps 2 and 3 to adjust the other PSM items if necessary. 5 Finish the procedure. You can change PSM (Preferred Setting Mode) items listed in the table that follows. 1 Enter the PSM menu (see page 4). 2 Select a PSM item. General settings — PSM Indications Items Settings, [reference pa[...]

21 ENGLISH Indications Items Settings, [reference page] Bright Display brightness 1 – 10 [Initial: 8] : Adjust the display contrast to make the display indications clear and legible. (If “Dimmer” is set to “On,” selecting “1” to “4“ takes no effect.) ID3 Tag Tag display • On [Initial] • Off : Shows the Tag information while pl[...]

22 ENGLISH Selecting timer for the dimmer You can dim the display at night or as you set the timer. 1 Select “Dimmer” from the PSM menu. 2 Select “Time Set.” 3 Adjust the dimmer time. 1 Set the dimmer start time. 24Hours : [0 – 23] 12Hours : [1A (1AM) – 12A (12AM); 1P (1PM) – 12P (12PM)] 2 Set the dimmer end time. 24Hours : [0 – 23][...]

23 ENGLISH Title assignment You can assign titles to station frequencies, CDs (both in this unit and in the CD changer) and the external components (LINE-IN and EXT-IN). Sources Maximum number of characters Station frequencies Up to 16 characters (up to 30 station frequencies including bothe FM and AM) CDs/CD-CH * Up to 32 characters (up to 30 disc[...]

24 ENGLISH iPod®/D. player operations This unit is ready for operating an Apple iPod or a JVC D. player from the control panel. Before operating your iPod or D. player: Connect either one of the following (separately purchased) to the CD changer jack on the rear of this unit. • Interface adapter for iPod ® —KS-PD100 for controlling an iPod. ?[...]

25 ENGLISH Selecting a track from the menu 1 Enter the main menu. Now the 5 / ∞ / 4 / ¢ buttons work as the menu selecting buttons * . * The menu selecting mode will be canceled: – If no operations are done for about 5 seconds. – When you confirm the selection of a track. 2 Select the desired menu. For iPod: Playlists Ô Artists Ô Albums Ô[...]

26 ENGLISH Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors. Moisture condensation Moisture may condense on the lens inside the CD player in the fol[...]

27 ENGLISH To keep discs clean A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge. • Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc.) to clean discs. To play new discs New discs may have some rough spots around the inner[...]

28 ENGLISH General • This unit has been designed to reproduce CDs/CD Texts, and CD-Rs (Recordable)/ CD-RWs (Rewritable) in audio CD (CD-DA) and MP3/WMA format; MP3/WMA files recorded in an SD card or a USB memory. • While playing an audio CD: If a title has been assigned to the audio CD (see page 23), it will be shown on the display. • While [...]

29 ENGLISH • This unit can recognize a total of 512 files, of 200 folders, and of 8 hierarchies. • This unit cannot play back the following files: – MP3 files encoded with MP3i and MP3 PRO format. – MP3 files encoded in an inappropriated format. – MP3 files encoded with Layer 1/2. – WMA files encoded with lossless, professional, and voi[...]

30 ENGLISH Sound adjustments Selecting the DSP modes—DSP • Effectiveness of “V.Cancel” depends on the recording condition of the sources: – Monaural sources such as AM and monaural FM broadcasting programs. – Multiplex sound sources. – Sources recorded with duets, strong echo, a chorus, or only a few instruments. • When “4ch” is[...]

ENGLISH 31 Available characters In addition to the Roman alphabets (A – Z, a – z), the following characters will be used. Accented letters: upper case Accented letters: lower case Preset frequency level settings for each sound mode Sound mode Preset equalizing value 63 Hz 125 Hz 250 Hz 500 Hz 1 kHz 2 kHz 4 kHz 8 kHz 12.5 kHz Flat 00 00 00 00 00[...]

32 ENGLISH Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. • The unit does not work at all. Reset the unit (see page 2). • “Connect Error” appears on the display. Remove the control panel, wipe the connector, then attach it again ([...]

ENGLISH 33 Continued on the next page Symptoms Remedies/Causes MP3/WMA playback • Disc cannot be played back. • Use a disc with MP3/WMA tracks recorded in the format compliant with ISO 9660 Level 1, Level 2, Romeo, or Joliet. • Add the extension code <.mp3> or <.wma> to the file names. • Noise is generated. Skip to another track[...]

34 ENGLISH Symptoms Remedies/Causes SD card/USB memory playback • “SD Loading Error” appears on the display while playing tracks from an SD card. Detach the control panel and reinsert the SD card. The control panel goes back to initial position (Angle 1). • While playing a track, sound is sometimes interrupted. MP3/WMA tracks have not been [...]

ENGLISH 35 Symptoms Remedies/Causes iPod/D. player playback • No sound can be heard when connecting an iPod nano. Disconnect the headphones from the iPod nano. • No sound can be heard. • “ERROR 01” appears on the display when connecting a D. player. Disconnect the adapter from the D. player. Then, connect it again. • “No Files” or ?[...]

36 ENGLISH Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Equalizer Control Range: Frequencies: Graphic EQ: 63 Hz, 125 H[...]

ENGLISH 37 CD PLAYER SECTION MP3: Bit Rate: 32 kbps – 320 kbps Sampling Frequency: MPEG-1: 48 kHz, 44.1 kHz, 33 kHz MPEG-2: 24 kHz, 22.05 kHz, 16 kHz WMA: Bit Rate: 8 kbps – 320 kbps Sampling Frequency: 48 kHz, 44.1 kHz, 32 kHz SD CARD Format: FAT 12/16 Storage: 8 MB – 512 MB Playable Audio Format: MP3/WMA MP3: Bit Rate: 8 kbps – 320 kbps S[...]

© 2006 Victor Company of Japan, Limited EN, IN 0206DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Ada MASALAH dengan cara pengoperasian? Setel kembali unit Anda Lihat halaman mengenai Bagaimana mereset unit anda Rear_SH1000U_004A_f.indd 2 Rear_SH1000U_004A_f.indd 2 1/16/06 12:48:38 PM 1/16/[...]

KD-SH1000 Installation/Connection Manual Manual Pemasangan/Penyambungan 0206DTSMDTJEIN EN, IN 1 ENGLISH This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems . If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC car audio dealers. J Handles Pegangan-pegangan F Washer (ø[...]

INSTALLATION (IN-DASH MOUNTING) The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC car audio dealer or a company supplying kits. • If you are not sure how to install this unit correctly, have it installed by a qualified technician. Removing the un[...]

ELECTRICAL CONNECTIONS SAMBUNGAN-SAMBUNGAN LISTRIK A Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit. The leads of the power cord and those of the connector from the car body may be different in color. 1 Connect the colored leads of the power cord in the order specified in the[...]

4 Connecting the external amplifiers and/or subwoofer / Penyambungan penguat eksternal dan/atau subwoofer You can connect amplifiers to upgrade your car stereo system. • Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this unit. • For amplifier only: – Dis conn ec[...]

5 Anda dapat menikmati sebuah dunia dari “audio murni” dalam mobil Anda dengan menyambungkan sistem speaker 3-arah (cakupan-tinggi/cakupan-sedang/subwoofer). PENTING: Jika Anda telah memasang sistem speaker 3-arah dalam mobil Anda, pastikan hal-hal berikut: • Sambungkan sistem speaker, seperti diilustrasikan di bawah. • Sebelum menggunakan [...]

6 Other external component / Komponen eksternal lainnya * 8 AUX Input Adapter KS-U58 (not supplied for this unit) * 8 Adapter Input AUX KS-U58 (tidak disediakan untuk alat penerima ini) • Set “Ext In” for the external input setting (See page 21 of the INSTRUCTIONS.) / Aturlah “Ext In” untuk pengaturan input eksternal (Lihat halaman 21 dar[...]

ENGLISH CD RECEIVER KD-SH1000 KD-SH1000 For canceling the display demonstration, see page 8. For installation and connections, refer to the separate manual. INSTRUCTIONS GET0365-005A [UT] Cover_SH1000U_005A_f.indd 2 Cover_SH1000U_005A_f.indd 2 1/16/06 12:49:20 PM 1/16/06 12:49:20 PM[...]

2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; [...]

ENGLISH 3 How to read this manual • Button operations are mainly explained with the illustrations in the table below. • Some related tips and notes are explained in “More about this unit” (see pages 27 – 31). Press briefly. Press repeatedly. Press either one. Press A , then B . Press and hold until your desired response begins. Press and [...]

4 ENGLISH How to enter the various menus The main menu contains seven menus (MODE, PSM, SEL, TITLE, BBE, EQ, DSP). • If no operation is done for about 5 seconds, menu screen is canceled. 1 2 Select a menu you want. 3 Enter the selected menu. • To go back to the previous screen or exit the MENU screen, press BACK repeatedly. 4 Operate as instruc[...]

ENGLISH 5 How to change the display information and patterns 1 BAND button 2 SOURCE button 3 • Control dial • POWER/ATT (attenuator)/ENTER button 4 MENU button 5 5 (up) / ∞ (down) buttons 6 Display window 7 DISP (display) button 8 USB (Universal Serial Bus) input terminal Parts identification Control panel 9 (angle) button p 0 (eject) button [...]

6 ENGLISH Remote controller — RM-RK300 Installing the lithium coin battery (CR2025) Aim the remote controller directly at the remote sensor on the unit. Make sure there is no obstacle in between. Warning: • Do not install any battery other than CR2025 or its equivalent; otherwise, it may explode. • Store the battery in a place where children [...]

ENGLISH 7 Continued on the next page 3 5 (up) / ∞ (down) buttons • For FM/AM: Changes the preset stations. • For MP3/WMA/SD/USB: Changes the folders. • While listening to an Apple iPod ® or a JVC D. player: – Pauses/stops or resumes playback with ∞ . – Enters the main menu with 5 . (Now 5 / ∞ / 4 / ¢ work as the menu selecting but[...]

8 ENGLISH To drop the volume in a moment (ATT) To restore the sound, press it again. To turn off the power Basic settings • See also “General settings — PSM” on pages 20 – 22. 1 Enter the PSM menu (see page 4). 2 1 Canceling the display demonstrations Select “Demo,” then “Off.” 2 Setting the clock Select “Clock H” (hour), then[...]

ENGLISH 9 4 MO indicator lights up. Reception improves, but stereo effect will be lost. To restore the stereo effect, repeat the same procedure and select “Off” in step 3 . The MO indicator goes off. Tuning in to FM stations with strong signals only—LO (local)/DX (Distance- Extreme) 1 Enter the MODE menu (see page 4). 2 3 4 DX indicator goes [...]

10 ENGLISH 4 5 6 Select a preset number. • You can move to the lists of the other FM bands by turning the control dial. 7 Store the station. When using the remote controller After tuning in to a station you want to preset... Listening to a preset station 1 2 When using the remote controller Directly select the preset number. EN10-15_SH1000U_001A_[...]

11 ENGLISH Disc/SD card/USB memory operations Playing a disc in the unit All tracks will be played repeatedly until you change the source or eject the disc. To stop play and eject the disc Note: If a USB memory is attached to the unit, you cannot eject the disc. “Please Eject USB” flashes on the display. If this happens, detach the USB memory, [...]

12 ENGLISH ! Attach the control panel. ⁄ • The control panel goes back to the previous position. Playback starts automatically if tracks are recorded. Playing from a USB memory This unit can play MP3/WMA tracks stored in a USB memory. All tracks in the USB memory will be played repeatedly until you change the source. • Removing the USB memory[...]

13 ENGLISH To go to the next or previous tracks To go to the next or previous folders (only for MP3/WMA/SD/USB) For MP3 tracks: For WMA tracks: • Holding the buttons can display the Disc List ( ) and Folder List ( / / ), see the following. Other main functions Selecting a disc/folder/track on the list • This function is not available for an aud[...]

14 ENGLISH Prohibiting disc ejection You can lock a disc in the loading slot. 1 2 After making sure “No Eject?” is selected... • “No Eject” flashes, and the disc cannot be ejected. To cancel the prohibition, repeat the same procedure after making sure “Eject OK?” is selected. • “Eject OK” flashes on the display. Selecting the pl[...]

15 ENGLISH To make more precise settings, see the following. To cancel the acoustic effect, select “Defeat” in step Ÿ . Precise settings for the DSP modes 1 Select a DSP mode. 2 Select the number of the built-in speakers. • For “Defeat” and “V.Cancel,” the speaker number is fixed to “4ch.” 3 Select your listening seat position. 4[...]

16 ENGLISH 3 Finish the procedure. Using the equalizer—EQ You can adjust the sound equalization patterns to your preference by using either Graphic EQ or Parametric EQ. • Adjust the equalizer to match the reproducible frequency range of the connected speakers; otherwise, the adjustments may not be effective. Selecting preset sound modes— Grap[...]

17 ENGLISH 3 Select a band. Band1 : 20.0 Hz – 1.2 kHz Band2 : 80.0 Hz – 5.0 kHz Band3 : 315.0 Hz – 20 kHz 4 Adjust the enhanced level for the selected band. 5 Select the frequency. • Band 1/2/3 are required to be preset at least 5 steps (frequencies) away from each other. (Only selectable frequencies are shown on the display.) 6 Select the [...]

18 ENGLISH Activating crossover network By activating crossover network, you can allocate different frequency range of sound signals to different speakers to match their characteristic. If you have installed the 3-way network speaker system in the car, make sure of the following: • Before using the system, activate crossover network and preset th[...]

19 ENGLISH To adjust reproduced frequency level—X-Over This setting is available only when crossover network (see page 18) is activated. 1 Select a filter. HPF (Front/Rear) : Frequencies lower than the selected level are cut-off. LPF (Rear) : Frequencies higher than the selected level are cut-off. 2 Select “On” to activate the selected filter[...]

20 ENGLISH 3 Select or adjust the selected PSM item. 4 Repeat steps 2 and 3 to adjust the other PSM items if necessary. 5 Finish the procedure. You can change PSM (Preferred Setting Mode) items listed in the table that follows. 1 Enter the PSM menu (see page 4). 2 Select a PSM item. General settings — PSM Indications Items Settings, [reference pa[...]

21 ENGLISH Indications Items Settings, [reference page] Bright Display brightness 1 – 10 [Initial: 8] : Adjust the display contrast to make the display indications clear and legible. (If “Dimmer” is set to “On,” selecting “1” to “4“ takes no effect.) ID3 Tag Tag display • On [Initial] • Off : Shows the Tag information while pl[...]

22 ENGLISH Selecting timer for the dimmer You can dim the display at night or as you set the timer. 1 Select “Dimmer” from the PSM menu. 2 Select “Time Set.” 3 Adjust the dimmer time. 1 Set the dimmer start time. 24Hours : [0 – 23] 12Hours : [1A (1AM) – 12A (12AM); 1P (1PM) – 12P (12PM)] 2 Set the dimmer end time. 24Hours : [0 – 23][...]

23 ENGLISH Title assignment You can assign titles to station frequencies, CDs (both in this unit and in the CD changer) and the external components (LINE-IN and EXT-IN). Sources Maximum number of characters Station frequencies Up to 16 characters (up to 30 station frequencies including bothe FM and AM) CDs/CD-CH * Up to 32 characters (up to 30 disc[...]

24 ENGLISH iPod®/D. player operations This unit is ready for operating an Apple iPod or a JVC D. player from the control panel. Before operating your iPod or D. player: Connect either one of the following (separately purchased) to the CD changer jack on the rear of this unit. • Interface adapter for iPod ® —KS-PD100 for controlling an iPod. ?[...]

25 ENGLISH Selecting a track from the menu 1 Enter the main menu. Now the 5 / ∞ / 4 / ¢ buttons work as the menu selecting buttons * . * The menu selecting mode will be canceled: – If no operations are done for about 5 seconds. – When you confirm the selection of a track. 2 Select the desired menu. For iPod: Playlists Ô Artists Ô Albums Ô[...]

26 ENGLISH Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors. Moisture condensation Moisture may condense on the lens inside the CD player in the fol[...]

27 ENGLISH To keep discs clean A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge. • Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc.) to clean discs. To play new discs New discs may have some rough spots around the inner[...]

28 ENGLISH General • This unit has been designed to reproduce CDs/CD Texts, and CD-Rs (Recordable)/ CD-RWs (Rewritable) in audio CD (CD-DA) and MP3/WMA format; MP3/WMA files recorded in an SD card or a USB memory. • While playing an audio CD: If a title has been assigned to the audio CD (see page 23), it will be shown on the display. • While [...]

29 ENGLISH • This unit can recognize a total of 512 files, of 200 folders, and of 8 hierarchies. • This unit cannot play back the following files: – MP3 files encoded with MP3i and MP3 PRO format. – MP3 files encoded in an inappropriated format. – MP3 files encoded with Layer 1/2. – WMA files encoded with lossless, professional, and voi[...]

30 ENGLISH Sound adjustments Selecting the DSP modes—DSP • Effectiveness of “V.Cancel” depends on the recording condition of the sources: – Monaural sources such as AM and monaural FM broadcasting programs. – Multiplex sound sources. – Sources recorded with duets, strong echo, a chorus, or only a few instruments. • When “4ch” is[...]

ENGLISH 31 Available characters In addition to the Roman alphabets (A – Z, a – z), the following characters will be used. Accented letters: upper case Accented letters: lower case Preset frequency level settings for each sound mode Sound mode Preset equalizing value 63 Hz 125 Hz 250 Hz 500 Hz 1 kHz 2 kHz 4 kHz 8 kHz 12.5 kHz Flat 00 00 00 00 00[...]

32 ENGLISH Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. • The unit does not work at all. Reset the unit (see page 2). • “Connect Error” appears on the display. Remove the control panel, wipe the connector, then attach it again ([...]

ENGLISH 33 Continued on the next page Symptoms Remedies/Causes MP3/WMA playback • Disc cannot be played back. • Use a disc with MP3/WMA tracks recorded in the format compliant with ISO 9660 Level 1, Level 2, Romeo, or Joliet. • Add the extension code <.mp3> or <.wma> to the file names. • Noise is generated. Skip to another track[...]

34 ENGLISH Symptoms Remedies/Causes SD card/USB memory playback • “SD Loading Error” appears on the display while playing tracks from an SD card. Detach the control panel and reinsert the SD card. The control panel goes back to initial position (Angle 1). • While playing a track, sound is sometimes interrupted. MP3/WMA tracks have not been [...]

ENGLISH 35 Symptoms Remedies/Causes iPod/D. player playback • No sound can be heard when connecting an iPod nano. Disconnect the headphones from the iPod nano. • No sound can be heard. • “ERROR 01” appears on the display when connecting a D. player. Disconnect the adapter from the D. player. Then, connect it again. • “No Files” or ?[...]

36 ENGLISH Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Equalizer Control Range: Frequencies: Graphic EQ: 63 Hz, 125 H[...]

ENGLISH 37 CD PLAYER SECTION MP3: Bit Rate: 32 kbps – 320 kbps Sampling Frequency: MPEG-1: 48 kHz, 44.1 kHz, 33 kHz MPEG-2: 24 kHz, 22.05 kHz, 16 kHz WMA: Bit Rate: 8 kbps – 320 kbps Sampling Frequency: 48 kHz, 44.1 kHz, 32 kHz SD CARD Format: FAT 12/16 Storage: 8 MB – 512 MB Playable Audio Format: MP3/WMA MP3: Bit Rate: 8 kbps – 320 kbps S[...]

© 2006 Victor Company of Japan, Limited EN, CT 0206DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Rear_SH1000U_005A_f.indd 2 Rear_SH1000U_005A_f.indd 2 1/16/06 12:50:04 PM 1/16/06 12:50:04 PM[...]

KD-SH1000 Installation/Connection Manual ϰ༬௥ો˿̱ 0206DTSMDTJEIN EN, CT 1 ENGLISH This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems . If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC car audio dealers. J Handles ػ଍ܓӕ˾ F Washer (ø5) ࿑੡ (ø5)[...]

INSTALLATION (IN-DASH MOUNTING) The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC car audio dealer or a company supplying kits. • If you are not sure how to install this unit correctly, have it installed by a qualified technician. Removing the un[...]

ELECTRICAL CONNECTIONS ྑཕ௥ો A Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit. The leads of the power cord and those of the connector from the car body may be different in color. 1 Connect the colored leads of the power cord in the order specified in the illustration b[...]

4 Connecting the external amplifiers and/or subwoofer / ௥ો͚ો؟ʩወ֝ / ׼චࡍљࡗಚᑶወ You can connect amplifiers to upgrade your car stereo system. • Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this unit. • For amplifier only: – Dis conn ec t t[...]

5 ઱̣̈́௤૊ʒ௢ಙᑵ዇Ԧ஀ăਢ෋Ƅˀ෋Ƅඟࡌјࡖಙᑵ዇Ą̣۔Ϛ઱ڄԆԾՙ֌īঝଶڄࡖ ᛏĬ̛ߍé ࡍ࠲! ϩشલϛԇԿϰ༬ʓ௣ಚᑶወԧ஁èቂᇨׇ̤ʔ౧ᓮê •  Ϩ಍࿌׿Ε௤૊ಙᑵ዇Ԧ஀é • ՟·Ԧ஀˃ۮçζጒޥ˜Ꮑႎു֜ྖζ௎׆ቱະڄ HPF/LPF ă̈́·ఛਢᏁ୊Ƅ̈́·ఛјᏁ୊Ą  ăॐѤݵ?[...]

6 Other external component / յ̨͚ોஈέ * 8 AUX Input Adapter KS-U58 (not supplied for this unit) * 8 AUX ᎔ʈቱ਎዇ KS-U58 ( ʿᎲʹጅಏա ) • Set “Ext In” for the external input setting (See page 21 of the INSTRUCTIONS.) / આ͚௱᎕ʉ௏ׇ௏г “Ext In” ( ͚௱᎕ʉ ) ( ੊ኍՠΈკبऐڅ୷ 21 ࡘê ) CD chang[...]

ENGLISH FRANÇAIS CD RECEIVER RECEPTEUR CD KD-SH1000 For installation and connections, refer to the separate manual. Pour l’installation et les raccordements, se référer au manuel séparé. INSTRUCTIONS MANUEL D’INSTRUCTIONS GET0366-003A [EX/EU] For canceling the display demonstration, see page 8. Pour annuler la démonstration des affichages[...]

2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; [...]

ENGLISH 3 How to read this manual • Button operations are mainly explained with the illustrations in the table below. • Some related tips and notes are explained in “More about this unit” (see pages 34 – 38). Press briefly. Press repeatedly. Press either one. Press A , then B . Press and hold until your desired response begins. Press and [...]

4 ENGLISH How to enter the various menus The main menu contains seven menus (MODE, PSM, SEL, TITLE, BBE, EQ, DSP). • If no operation is done for about 5 seconds, menu screen is canceled. 1 2 Select a menu you want. 3 Enter the selected menu. • To go back to the previous screen or exit the MENU screen, press BACK repeatedly. 4 Operate as instruc[...]

ENGLISH 5 How to change the display information and patterns 1 BAND button 2 SOURCE button 3 • Control dial • POWER/ATT (attenuator)/ENTER button 4 MENU button 5 5 (up) / ∞ (down) buttons 6 Display window 7 DISP (display) button 8 USB (Universal Serial Bus) input terminal Parts identification Control panel 9 T/P (traffic programme/programme t[...]

6 ENGLISH Remote controller — RM-RK300 Installing the lithium coin battery (CR2025) Aim the remote controller directly at the remote sensor on the unit. Make sure there is no obstacle in between. Warning: • Do not install any battery other than CR2025 or its equivalent; otherwise, it may explode. • Store the battery in a place where children [...]

ENGLISH 7 Continued on the next page 2 SOURCE button Selects the source. 3 5 (up) / ∞ (down) buttons • For DAB: Changes the service. • For MP3/WMA/SD/USB: Changes the folders. • While listening to an Apple iPod ® or a JVC D. player: – Pauses/stops or resumes playback with ∞ . – Enters the main menu with 5 . (Now 5 / ∞ / 4 / ¢ work[...]

8 ENGLISH To drop the volume in a moment (ATT) To restore the sound, press it again. To turn off the power Basic settings • See also “General settings — PSM” on pages 23 – 26. 1 Enter the PSM menu (see page 4). 2 1 Canceling the display demonstrations Select “Demo,” then “Off.” 2 Setting the clock Select “Clock H” (hour), then[...]

ENGLISH 9 4 MO indicator lights up. Reception improves, but stereo effect will be lost. To restore the stereo effect, repeat the same procedure and select “Off” in step 3 . The MO indicator goes off. Tuning in to FM stations with strong signals only—LO (local)/DX (Distance- Extreme) 1 Enter the MODE menu (see page 4). 2 3 4 DX indicator goes [...]

10 ENGLISH 4 5 6 Select a preset number. • You can move to the lists of the other FM bands by turning the control dial. 7 Store the station. When using the remote controller After tuning in to a station you want to preset... Listening to a preset station 1 2 Enter the MODE menu (see page 4). 3 4 5 Select a preset number. • You can move to the l[...]

11 ENGLISH Continued on the next page FM RDS operations What you can do with RDS RDS (Radio Data System) allows FM stations to send an additional signal along with their regular programme signals. By receiving the RDS data, this unit can do the following: • Programme Type (PTY) Search (see the following) • TA (Traffic Announcement) and PTY Stan[...]

12 ENGLISH 5 Store the setting. 6 To store other PTY codes into other preset numbers. 7 Finish the procedure. Using the standby receptions TA Standby Reception TA Standby Reception allows the unit to switch temporarily to Traffic Announcement (TA) from any source other than AM. The volume changes to the preset TA volume level if the current level i[...]

13 ENGLISH Tracing the same programme— Network-Tracking Reception When driving in an area where FM reception is not sufficient enough, this unit automatically tunes in to another FM RDS station of the same network, possibly broadcasting the same programme with stronger signals (see the illustration below). Programme A broadcasting on different fr[...]

14 ENGLISH Disc/SD card/USB memory operations Playing a disc in the unit All tracks will be played repeatedly until you change the source or eject the disc. To stop play and eject the disc Note: If a USB memory is attached to the unit, you cannot eject the disc. “Please Eject USB” flashes on the display. If this happens, detach the USB memory, [...]

15 ENGLISH Continued on the next page ! Attach the control panel. ⁄ • The control panel goes back to the previous position. Playback starts automatically if tracks are recorded. Playing from a USB memory This unit can play MP3/WMA tracks stored in a USB memory. All tracks in the USB memory will be played repeatedly until you change the source. [...]

16 ENGLISH To go to the next or previous tracks To go to the next or previous folders (only for MP3/WMA/SD/USB) For MP3 tracks: For WMA tracks: • Holding the buttons can display the Disc List ( ) and Folder List ( / / ), see the following. Other main functions Selecting a disc/folder/track on the list • This function is not available for an aud[...]

17 ENGLISH Prohibiting disc ejection You can lock a disc in the loading slot. 1 2 After making sure “No Eject?” is selected... • “No Eject” flashes, and the disc cannot be ejected. To cancel the prohibition, repeat the same procedure after making sure “Eject OK?” is selected. • “Eject OK” flashes on the display. Selecting the pl[...]

18 ENGLISH To make more precise settings, see the following. To cancel the acoustic effect, select “Defeat” in step Ÿ . Precise settings for the DSP modes 1 Select a DSP mode. 2 Select the number of the built-in speakers. • For “Defeat” and “V.Cancel,” the speaker number is fixed to “4ch.” 3 Select your listening seat position. 4[...]

19 ENGLISH 3 Finish the procedure. Using the equalizer—EQ You can adjust the sound equalization patterns to your preference by using either Graphic EQ or Parametric EQ. • Adjust the equalizer to match the reproducible frequency range of the connected speakers; otherwise, the adjustments may not be effective. Selecting preset sound modes— Grap[...]

20 ENGLISH 3 Select a band. Band1 : 20.0 Hz – 1.2 kHz Band2 : 80.0 Hz – 5.0 kHz Band3 : 315.0 Hz – 20 kHz 4 Adjust the enhanced level for the selected band. 5 Select the frequency. • Band 1/2/3 are required to be preset at least 5 steps (frequencies) away from each other. (Only selectable frequencies are shown on the display.) 6 Select the [...]

21 ENGLISH Activating crossover network By activating crossover network, you can allocate different frequency range of sound signals to different speakers to match their characteristic. If you have installed the 3-way network speaker system in the car, make sure of the following: • Before using the system, activate crossover network and preset th[...]

22 ENGLISH To adjust reproduced frequency level—X-Over This setting is available only when crossover network (see page 21) is activated. 1 Select a filter. HPF (Front/Rear) : Frequencies lower than the selected level are cut-off. LPF (Rear) : Frequencies higher than the selected level are cut-off. 2 Select “On” to activate the selected filter[...]

23 ENGLISH 3 Select or adjust the selected PSM item. 4 Repeat steps 2 and 3 to adjust the other PSM items if necessary. 5 Finish the procedure. You can change PSM (Preferred Setting Mode) items listed in the table that follows. 1 Enter the PSM menu (see page 4). 2 Select a PSM item. General settings — PSM Indications Items Settings, [reference pa[...]

24 ENGLISH Indications Items Settings, [reference page] Dimmer • Auto [Initial] • Time Set • Off • On : Dims the display when you turn on the headlights. : Sets the timer for dimmer, see page 25 for setting. From: Any hour; To: Any hour : Cancels. : Activates dimmer. (Does not work if “Bright” is set to “1.”) Bright Display brightne[...]

25 ENGLISH 2 Set the dimmer end time. 24Hours : [0 – 23] 12Hours : [1A (1AM) – 12A (12AM); 1P (1PM) – 12P (12PM)] 4 Finish the procedure. Indications Items Settings, [reference page] Beep Key-touch tone • On [Initial] • Off : Activates the key-touch tone. : Deactivates the key-touch tone. Ext In * 4 External input • Changer [Initial] ?[...]

26 ENGLISH Title assignment You can assign titles to CDs (both in this unit and in the CD changer) and the external components (LINE-IN and EXT-IN). Sources Maximum number of characters CDs/CD-CH * Up to 32 characters (up to 30 discs) External component Up to 16 characters * You cannot assign names to any discs other than conventional CDs. 1 Select[...]

27 ENGLISH 3 Move to the next (or previous) character position. 4 Repeat steps 1 and 3 until you finish entering the title. 4 Finish the procedure. • To cancel the title entry without registration, press MENU. To erase the entire title In step 3 ... Available characters In addition to the Roman alphabets (A – Z, a – z), the following characte[...]

28 ENGLISH Selecting a track from the menu 1 Enter the main menu. Now the 5 / ∞ / 4 / ¢ buttons work as the menu selecting buttons * . * The menu selecting mode will be canceled: – If no operations are done for about 5 seconds. – When you confirm the selection of a track. 2 Select the desired menu. For iPod: Playlists Ô Artists Ô Albums Ô[...]

29 ENGLISH Selecting the playback modes 1 Enter the MODE menu (see page 4). 2 Select one of the playback modes. 3 Select an item (see table below). 4 Finish the procedure. Repeat play One : Functions the same as “Repeat One” of the iPod or “Repeat Mode = One” for the D. player. All : Functions the same as “Repeat All” of the iPod or “[...]

30 ENGLISH 4 Finish the procedure. • The DRC indicator will be highlighted only when receiving DRC signals from the tuned service. To search for your favorite service You can search for either Dynamic or Static PTY codes. • Operations are exactly the same as explained on pages 11 and 12 for FM RDS stations. • You cannot store PTY codes separa[...]

31 ENGLISH 5 Store the service. When using the remote controller After tuning in to a service you want to preset... Tuning in to a preset DAB service 1 2 Enter the MODE menu (see page 4). 3 Select “List.” 4 Select a preset number. • You can move to the lists of the other DAB bands by turning the control dial. When using the remote controller [...]

32 ENGLISH When shipped from the factory, Alternative Frequency Reception is activated. To deactivate the Alternative Frequency Reception, see page 24. To show the Dynamic Label Segment (DLS) information • The DLS screen will be temporarily canceled when you operate the unit. Lights up when receiving a service providing DLS. 3 Select an announce [...]

33 ENGLISH Continued on the next page Other external component operations You can connect an external component to the LINE IN plugs on the rear or to the CD changer jack on the rear using the Line Input Adapter—KS-U57 (not supplied) or AUX Input Adapter—KS-U58 (not supplied). • For connection, see Installation/Connection Manual (separate vol[...]

34 ENGLISH More about this unit Basic operations Turning on the power • By pressing SOURCE on the unit, you can also turn on the power. If the source is ready, playback also starts. Turning off the power • If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you tur[...]

35 ENGLISH • Message service requires the RDS Radiotext signal. It is available on most major stations. If reception is weak, the service may become unavailable. For any questions regarding the content of this service, please contact your broadcaster. • If you want to know more about RDS, visit «http://www.rds.org.uk». Disc/SD card/USB memory[...]

36 ENGLISH – Romeo * : up to 128 (72) characters – Joliet * : up to 64 (36) characters – Windows long file name * : up to 128 (72) characters * The parenthetic figure is the maximum number of characters for file/folder names in case the total number of files and folders is 313 or more. • This unit can play back the files recorded in VBR (va[...]

ENGLISH 37 Continued on the next page Sound adjustments Selecting the DSP modes—DSP • Effectiveness of “V.Cancel” depends on the recording condition of the sources: – Monaural sources such as AM and monaural FM broadcasting programs. – Multiplex sound sources. – Sources recorded with duets, strong echo, a chorus, or only a few instrum[...]

38 ENGLISH Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. • The unit does not work at all. Reset the unit (see page 2). • “Connect Error” appears on the display. Remove the control panel, wipe the connector, then attach it again ([...]

ENGLISH 39 Continued on the next page Symptoms Remedies/Causes Disc playback • Disc cannot be played back. Insert the disc correctly. • CD-R/CD-RW cannot be played back. • Tracks on the CD-R/CD-RW cannot be skipped. • Insert a finalized CD-R/CD-RW. • Finalize the CD-R/CD-RW with the component which you used for recording. • Disc can be [...]

40 ENGLISH Symptoms Remedies/Causes SD card/USB memory playback • Noise is generated. The track played back is not an MP3/WMA track. Skip to another file. (Do not add the extension code <.mp3> or <.wma> to non-MP3 or WMA tracks.) • “File Check” keeps flashing on the display. • Readout time varies depending on the device. • D[...]

ENGLISH 41 Symptoms Remedies/Causes iPod/D. player playback • The iPod or D. player does not turn on or does not work. • Check the connecting cable and its connection. • Update the firmware version. • Charge the battery. • Buttons do not work as intended. The functions of the buttons have been changed. Press POWER/ATT/ENTER before perform[...]

42 ENGLISH Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Equalizer Control Range: Frequencies: Graphic EQ: 63 Hz, 125 H[...]

ENGLISH 43 CD PLAYER SECTION Type: Compact disc player Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: 5 Hz to 20 000 Hz Dynamic Range: 98 dB Signal-to-Noise Ratio: 102 dB Wow and Flutter: Less than measurable limit MP3: Bit Rate: 32 kbps – 320 kbps Sampling Fre[...]

EN, FR 0106DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Vous avez des PROBLÈMES de fonctionnement? Réinitialisez votre appareil Référez-vous à la page intitulée Comment réinitialiser votre appareil © 2006 Victor Company of Japan, Limited Rear_SH1000_003A_3.indd 2 Rear_SH1000_003A_3[...]

KD-SH1000 Installation/Connection Manual Manuel d’installation/raccordement 0106DTSMDTJEIN EN, FR 1 ENGLISH This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems . If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC IN-CAR ENTERTAINMENT dealers. FRANÇAIS Cet appareil [...]

INSTALLATION (IN-DASH MOUNTING) The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC IN-CAR ENTERTAINMENT dealer or a company supplying kits. • If you are not sure how to install this unit correctly, have it installed by a qualified technician. Remo[...]

Line out (see diagram ) Sortie de ligne (voir le diagramme ) Rear ground terminal Borne arrière de masse 15 A fuse Fusible 15 A Black Noir Blue with white stripe Bleu avec bande blanche Red Rouge Yellow * 5 Jaune * 5 Brown Marron To metallic body or chassis of the car Vers corps métallique ou châssis de la voiture Ignition switch Interrupteur d?[...]

4 Connecting the external amplifiers and/or subwoofer / Connexion d’amplificateurs extérieurs et/ou caisson de grave You can connect amplifiers to upgrade your car stereo system. • Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this unit. • For amplifier only: ?[...]

Vous pouvez recréer un monde de “son pur” dans votre voiture en connectant un système d’enceintes à trois voies (hautes fréquences/moyennes fréquences/extrêmes graves). IMPORTANT: Si vous avez installé un système d’enceintes à trois voies dans votre voiture, assurez-vous de ce qui suit. • Connectez le système d’enceintes comme[...]

or ou JVC DAB tuner Tuner DAB JVC JVC CD changer Changeur CD JVC Apple iPod (separately purchased) iPod Apple (vendu séparément) JVC D. player (separately purchased) Lecteur D. JVC (vendu séparément) Other external component / Autre appareil extérieur * 9 AUX Input Adapter KS-U58 (not supplied for this unit) * 9 Adaptateur d’entrée AUX KS-U[...]

ENGLISH DEUTSCH РУCCKИЙ CD RECEIVER CD-RECEIVER РЕСИВЕР С ПРОИГРЫВАТЕЛЕМ КОМПАКТ-ДИСКОВ KD-SH1000 For installation and connections, refer to the separate manual. Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch. Указания по установке и выполнению соедин?[...]

2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; [...]

ENGLISH 3 How to read this manual • Button operations are mainly explained with the illustrations in the table below. • Some related tips and notes are explained in “More about this unit” (see pages 34 – 38). Press briefly. Press repeatedly. Press either one. Press A , then B . Press and hold until your desired response begins. Press and [...]

4 ENGLISH How to enter the various menus The main menu contains seven menus (MODE, PSM, SEL, TITLE, BBE, EQ, DSP). • If no operation is done for about 5 seconds, menu screen is canceled. 1 2 Select a menu you want. 3 Enter the selected menu. • To go back to the previous screen or exit the MENU screen, press BACK repeatedly. 4 Operate as instruc[...]

ENGLISH 5 How to change the display information and patterns 1 BAND button 2 SOURCE button 3 • Control dial • POWER/ATT (attenuator)/ENTER button 4 MENU button 5 5 (up) / ∞ (down) buttons 6 Display window 7 DISP (display) button 8 USB (Universal Serial Bus) input terminal Parts identification Control panel 9 T/P (traffic programme/programme t[...]

6 ENGLISH Remote controller — RM-RK300 Installing the lithium coin battery (CR2025) Aim the remote controller directly at the remote sensor on the unit. Make sure there is no obstacle in between. Warning: • Do not install any battery other than CR2025 or its equivalent; otherwise, it may explode. • Store the battery in a place where children [...]

ENGLISH 7 Continued on the next page 2 SOURCE button Selects the source. 3 5 (up) / ∞ (down) buttons • For DAB: Changes the service. • For MP3/WMA/SD/USB: Changes the folders. • While listening to an Apple iPod ® or a JVC D. player: – Pauses/stops or resumes playback with ∞ . – Enters the main menu with 5 . (Now 5 / ∞ / 4 / ¢ work[...]

8 ENGLISH To drop the volume in a moment (ATT) To restore the sound, press it again. To turn off the power Basic settings • See also “General settings — PSM” on pages 23 – 26. 1 Enter the PSM menu (see page 4). 2 1 Canceling the display demonstrations Select “Demo,” then “Off.” 2 Setting the clock Select “Clock H” (hour), then[...]

ENGLISH 9 4 MO indicator lights up. Reception improves, but stereo effect will be lost. To restore the stereo effect, repeat the same procedure and select “Off” in step 3 . The MO indicator goes off. Tuning in to FM stations with strong signals only—LO (local)/DX (Distance- Extreme) 1 Enter the MODE menu (see page 4). 2 3 4 DX indicator goes [...]

10 ENGLISH 4 5 6 Select a preset number. • You can move to the lists of the other FM bands by turning the control dial. 7 Store the station. When using the remote controller After tuning in to a station you want to preset... Listening to a preset station 1 2 Enter the MODE menu (see page 4). 3 4 5 Select a preset number. • You can move to the l[...]

11 ENGLISH Continued on the next page FM RDS operations What you can do with RDS RDS (Radio Data System) allows FM stations to send an additional signal along with their regular programme signals. By receiving the RDS data, this unit can do the following: • Programme Type (PTY) Search (see the following) • TA (Traffic Announcement) and PTY Stan[...]

12 ENGLISH 5 Store the setting. 6 To store other PTY codes into other preset numbers. 7 Finish the procedure. Using the standby receptions TA Standby Reception TA Standby Reception allows the unit to switch temporarily to Traffic Announcement (TA) from any source other than AM. The volume changes to the preset TA volume level if the current level i[...]

13 ENGLISH Tracing the same programme— Network-Tracking Reception When driving in an area where FM reception is not sufficient enough, this unit automatically tunes in to another FM RDS station of the same network, possibly broadcasting the same programme with stronger signals (see the illustration below). Programme A broadcasting on different fr[...]

14 ENGLISH Disc/SD card/USB memory operations Playing a disc in the unit All tracks will be played repeatedly until you change the source or eject the disc. To stop play and eject the disc Note: If a USB memory is attached to the unit, you cannot eject the disc. “Please Eject USB” flashes on the display. If this happens, detach the USB memory, [...]

15 ENGLISH Continued on the next page ! Attach the control panel. ⁄ • The control panel goes back to the previous position. Playback starts automatically if tracks are recorded. Playing from a USB memory This unit can play MP3/WMA tracks stored in a USB memory. All tracks in the USB memory will be played repeatedly until you change the source. [...]

16 ENGLISH To go to the next or previous tracks To go to the next or previous folders (only for MP3/WMA/SD/USB) For MP3 tracks: For WMA tracks: • Holding the buttons can display the Disc List ( ) and Folder List ( / / ), see the following. Other main functions Selecting a disc/folder/track on the list • This function is not available for an aud[...]

17 ENGLISH Prohibiting disc ejection You can lock a disc in the loading slot. 1 2 After making sure “No Eject?” is selected... • “No Eject” flashes, and the disc cannot be ejected. To cancel the prohibition, repeat the same procedure after making sure “Eject OK?” is selected. • “Eject OK” flashes on the display. Selecting the pl[...]

18 ENGLISH To make more precise settings, see the following. To cancel the acoustic effect, select “Defeat” in step Ÿ . Precise settings for the DSP modes 1 Select a DSP mode. 2 Select the number of the built-in speakers. • For “Defeat” and “V.Cancel,” the speaker number is fixed to “4ch.” 3 Select your listening seat position. 4[...]

19 ENGLISH 3 Finish the procedure. Using the equalizer—EQ You can adjust the sound equalization patterns to your preference by using either Graphic EQ or Parametric EQ. • Adjust the equalizer to match the reproducible frequency range of the connected speakers; otherwise, the adjustments may not be effective. Selecting preset sound modes— Grap[...]

20 ENGLISH 3 Select a band. Band1 : 20.0 Hz – 1.2 kHz Band2 : 80.0 Hz – 5.0 kHz Band3 : 315.0 Hz – 20 kHz 4 Adjust the enhanced level for the selected band. 5 Select the frequency. • Band 1/2/3 are required to be preset at least 5 steps (frequencies) away from each other. (Only selectable frequencies are shown on the display.) 6 Select the [...]

21 ENGLISH Activating crossover network By activating crossover network, you can allocate different frequency range of sound signals to different speakers to match their characteristic. If you have installed the 3-way network speaker system in the car, make sure of the following: • Before using the system, activate crossover network and preset th[...]

22 ENGLISH To adjust reproduced frequency level—X-Over This setting is available only when crossover network (see page 21) is activated. 1 Select a filter. HPF (Front/Rear) : Frequencies lower than the selected level are cut-off. LPF (Rear) : Frequencies higher than the selected level are cut-off. 2 Select “On” to activate the selected filter[...]

23 ENGLISH 3 Select or adjust the selected PSM item. 4 Repeat steps 2 and 3 to adjust the other PSM items if necessary. 5 Finish the procedure. You can change PSM (Preferred Setting Mode) items listed in the table that follows. 1 Enter the PSM menu (see page 4). 2 Select a PSM item. General settings — PSM Indications Items Settings, [reference pa[...]

24 ENGLISH Indications Items Settings, [reference page] Dimmer • Auto [Initial] • Time Set • Off • On : Dims the display when you turn on the headlights. : Sets the timer for dimmer, see page 25 for setting. From: Any hour; To: Any hour : Cancels. : Activates dimmer. (Does not work if “Bright” is set to “1.”) Bright Display brightne[...]

25 ENGLISH 2 Set the dimmer end time. 24Hours : [0 – 23] 12Hours : [1A (1AM) – 12A (12AM); 1P (1PM) – 12P (12PM)] 4 Finish the procedure. Indications Items Settings, [reference page] Beep Key-touch tone • On [Initial] • Off : Activates the key-touch tone. : Deactivates the key-touch tone. Ext In * 4 External input • Changer [Initial] ?[...]

26 ENGLISH Title assignment You can assign titles to CDs (both in this unit and in the CD changer) and the external components (LINE-IN and EXT-IN). Sources Maximum number of characters CDs/CD-CH * Up to 32 characters (up to 30 discs) External component Up to 16 characters * You cannot assign names to any discs other than conventional CDs. 1 Select[...]

27 ENGLISH 3 Move to the next (or previous) character position. 4 Repeat steps 1 and 3 until you finish entering the title. 4 Finish the procedure. • To cancel the title entry without registration, press MENU. To erase the entire title In step 3 ... Available characters In addition to the Roman alphabets (A – Z, a – z), the following characte[...]

28 ENGLISH Selecting a track from the menu 1 Enter the main menu. Now the 5 / ∞ / 4 / ¢ buttons work as the menu selecting buttons * . * The menu selecting mode will be canceled: – If no operations are done for about 5 seconds. – When you confirm the selection of a track. 2 Select the desired menu. For iPod: Playlists Ô Artists Ô Albums Ô[...]

29 ENGLISH Selecting the playback modes 1 Enter the MODE menu (see page 4). 2 Select one of the playback modes. 3 Select an item (see table below). 4 Finish the procedure. Repeat play One : Functions the same as “Repeat One” of the iPod or “Repeat Mode = One” for the D. player. All : Functions the same as “Repeat All” of the iPod or “[...]

30 ENGLISH 4 Finish the procedure. • The DRC indicator will be highlighted only when receiving DRC signals from the tuned service. To search for your favorite service You can search for either Dynamic or Static PTY codes. • Operations are exactly the same as explained on pages 11 and 12 for FM RDS stations. • You cannot store PTY codes separa[...]

31 ENGLISH 5 Store the service. When using the remote controller After tuning in to a service you want to preset... Tuning in to a preset DAB service 1 2 Enter the MODE menu (see page 4). 3 Select “List.” 4 Select a preset number. • You can move to the lists of the other DAB bands by turning the control dial. When using the remote controller [...]

32 ENGLISH When shipped from the factory, Alternative Frequency Reception is activated. To deactivate the Alternative Frequency Reception, see page 24. To show the Dynamic Label Segment (DLS) information • The DLS screen will be temporarily canceled when you operate the unit. Lights up when receiving a service providing DLS. 3 Select an announce [...]

33 ENGLISH Continued on the next page Other external component operations You can connect an external component to the LINE IN plugs on the rear or to the CD changer jack on the rear using the Line Input Adapter—KS-U57 (not supplied) or AUX Input Adapter—KS-U58 (not supplied). • For connection, see Installation/Connection Manual (separate vol[...]

34 ENGLISH More about this unit Basic operations Turning on the power • By pressing SOURCE on the unit, you can also turn on the power. If the source is ready, playback also starts. Turning off the power • If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you tur[...]

35 ENGLISH • Message service requires the RDS Radiotext signal. It is available on most major stations. If reception is weak, the service may become unavailable. For any questions regarding the content of this service, please contact your broadcaster. • If you want to know more about RDS, visit «http://www.rds.org.uk». Disc/SD card/USB memory[...]

36 ENGLISH – Romeo * : up to 128 (72) characters – Joliet * : up to 64 (36) characters – Windows long file name * : up to 128 (72) characters * The parenthetic figure is the maximum number of characters for file/folder names in case the total number of files and folders is 313 or more. • This unit can play back the files recorded in VBR (va[...]

ENGLISH 37 Continued on the next page Sound adjustments Selecting the DSP modes—DSP • Effectiveness of “V.Cancel” depends on the recording condition of the sources: – Monaural sources such as AM and monaural FM broadcasting programs. – Multiplex sound sources. – Sources recorded with duets, strong echo, a chorus, or only a few instrum[...]

38 ENGLISH Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. • The unit does not work at all. Reset the unit (see page 2). • “Connect Error” appears on the display. Remove the control panel, wipe the connector, then attach it again ([...]

ENGLISH 39 Continued on the next page Symptoms Remedies/Causes Disc playback • Disc cannot be played back. Insert the disc correctly. • CD-R/CD-RW cannot be played back. • Tracks on the CD-R/CD-RW cannot be skipped. • Insert a finalized CD-R/CD-RW. • Finalize the CD-R/CD-RW with the component which you used for recording. • Disc can be [...]

40 ENGLISH Symptoms Remedies/Causes SD card/USB memory playback • Noise is generated. The track played back is not an MP3/WMA track. Skip to another file. (Do not add the extension code <.mp3> or <.wma> to non-MP3 or WMA tracks.) • “File Check” keeps flashing on the display. • Readout time varies depending on the device. • D[...]

ENGLISH 41 Symptoms Remedies/Causes iPod/D. player playback • The iPod or D. player does not turn on or does not work. • Check the connecting cable and its connection. • Update the firmware version. • Charge the battery. • Buttons do not work as intended. The functions of the buttons have been changed. Press POWER/ATT/ENTER before perform[...]

42 ENGLISH Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Equalizer Control Range: Frequencies: Graphic EQ: 63 Hz, 125 H[...]

ENGLISH 43 CD PLAYER SECTION Type: Compact disc player Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: 5 Hz to 20 000 Hz Dynamic Range: 98 dB Signal-to-Noise Ratio: 102 dB Wow and Flutter: Less than measurable limit MP3: Bit Rate: 32 kbps – 320 kbps Sampling Fre[...]

EN, GE, RU 0106DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Haben Sie PROBLEME mit dem Betrieb? Bitte setzen Sie Ihr Gerät zurück Siehe Seite Zurücksetzen des Geräts Затруднения при эксплуатации? Пожалуйста, перезагрузите Ваше уст[...]

KD-SH1000 Installation/Connection Manual Einbau/Anschlußanleitung Руководство по установке/подключению 0106DTSMDTJEIN EN, GE, RU ENGLISH This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems . If your vehicle does not have this system, a voltage inverter is required, which can be purchased[...]

INSTALLATION (IN-DASH MOUNTING) The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC IN-CAR ENTERTAINMENT dealer or a company supplying kits. • If you are not sure how to install this unit correctly, have it installed by a qualified technician. EINB[...]

A * 5 Before checking the operation of this unit prior to installation, this lead must be connected, otherwise power cannot be turned on. * 5 Vor der Überprüfung der Funktionsfähigkeit des Geräts vor dem Einbau, muß diese Leitung angeschlossen werden, da sonst die Stromversorgung nicht eingeschaltet werden kann. * 5 Перед проверко[...]

C Connecting the external amplifiers and/or subwoofer / Anschließen der externen Verstärker und/oder Subwoofer / Подключение внешних усилителей и/или низкочастотного динамика You can connect amplifiers to upgrade your car stereo system. • Connect the remote lead (blue with white stripe) to [...]

You can enjoy a world of “pure audio” in your car by connecting 3- way network speaker system (high-range/mid-range/subwoofer). IMPORTANT: If you have installed the 3-way network speaker system in the car, make sure of the following. • Connect the speaker system as illustrated below. • Before using the system, activate crossover network and[...]

CAUTION / ACHTUNG / ПРЕДОСТЕРЕЖЕНИЕ: • Before connecting the external components, make sure that the unit is turned off. • Vor dem Anschließen der externen Komponenten sicherstellen, dass das Gerät ausgeschaltet ist. • Перед подключением внешних компонентов убедитесь в том, чт[...]