English dropdown-ico

Emerson Process Management Rosemount 2410 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144

Go to page of

Similar user manuals

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Emerson Process Management Rosemount 2410, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Emerson Process Management Rosemount 2410 one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Emerson Process Management Rosemount 2410. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Emerson Process Management Rosemount 2410 should contain:
- informations concerning technical data of Emerson Process Management Rosemount 2410
- name of the manufacturer and a year of construction of the Emerson Process Management Rosemount 2410 item
- rules of operation, control and maintenance of the Emerson Process Management Rosemount 2410 item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Emerson Process Management Rosemount 2410 alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Emerson Process Management Rosemount 2410, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Emerson Process Management service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Emerson Process Management Rosemount 2410.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Emerson Process Management Rosemount 2410 item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    www .rosemount-tg.com Reference Manual 300530EN, Rev BA September 20 12 Rosemount 2410 Ta n k H u b[...]

  • Page 2

    [...]

  • Page 3

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 www .rosemount-tg.com Rosemount 2410 T ank Hub Cover Photo: 2410_coverfoto.tif NOTICE Read this manual before working with t he produ ct. For personal and system safety , and for optimum product performance, make sure you thoroughly understand the contents before installing, using, or [...]

  • Page 4

    [...]

  • Page 5

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 www .rosemount-tg.com T able of Content s SECTION 1 Introduction 1.1 Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 1.2 Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 1.3 Manual Overview . .[...]

  • Page 6

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 TOC -2 Table of Contents 4.6.1 Installation Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5 4.6.2 Advanced Configuration . . . . . . . . . . . . . . . . . . . . . . . 4-5 4.6.3 FCU 2160 Conf iguration . . . . . . . . . . . . . . . . . . . . . . 4-6 SECTION 5 Operation [...]

  • Page 7

    Reference Manual 300530EN, Rev BA September 20 12 TOC -3 Rosemount 2410 Table of Contents C.5 Relay Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-6 C.6 Hybrid Density Calculation . . . . . . . . . . . . . . . . . . . . . . . . . . . C-10 C.6.1 Hybrid Density Configurat ion . . . . . . . . . . . . . . . . . .[...]

  • Page 8

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 TOC -4 Table of Contents[...]

  • Page 9

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 www .rosemount-tg.com Section 1 Introduction 1.1 Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . p age 1- 1 1.2 Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p age 1-2 1.3 Manual Overview . . . . . . . . . . . . . . . . . . . . . [...]

  • Page 10

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 1-2 Section 1. Introducti on 1.2 SYMBOLS The CE marking symbolises the conformity of the prod uct with the applicable Eu ropean Community Directives. The EC-T ype Examination Certificate is a statement of a Notified Certification Body declaring that this prod uct meets the Essential He[...]

  • Page 11

    Reference Manual 300530EN, Rev BA September 20 12 1-3 Rosemount 2410 Section 1. Introduction 1.3 MANUAL OVERVIEW This manual provides information on installation, configuration and maintenance of the Rosemount 2410 T a nk Hub. Section 2: O verview • System architecture • Installatio n procedure Section 3: Inst allation • Mounting consideratio[...]

  • Page 12

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 1-4 Section 1. Introducti on 1.4 T ECHNICAL DOCUMENT ATION The Raptor T ank Gauging System includes the following do cumentation: • Raptor T echnical Description (704010EN) • Rosemount 5900S Reference Manu al (300520EN) • Rosemount 2410 Reference Manual (300530EN) • Rosemount 2[...]

  • Page 13

    Reference Manual 300530EN, Rev BA September 20 12 1-5 Rosemount 2410 Section 1. Introduction 1.5 SERVICE SUPPORT For service support cont act the nearest Emerson Process Management/Rosemount T ank Gauging representative. Co ntact information can be found on the web site www .rosemount-tg.com. 1.6 PRODUCT RECY CLING/DISPOSAL Recycling of equipment a[...]

  • Page 14

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 1-6 Section 1. Introducti on[...]

  • Page 15

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 www .rosemount-tg.com Section 2 Overview 2.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p age 2-1 2.2 Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p age 2-5 2.3 System Overview . . . . . . . . . . . . . . . . . . . . . . . .[...]

  • Page 16

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 2-2 Section 2. Overview The Rosem ount 2410 has two ex ternal buse s for commu nication with host systems. The Primary Bus is typically used with the TRL2 Modbus o r RS-485 Modbus protocol for communica tion with a 2160 Fi eld Communication Unit. If there is no 2160 include d, the Prim[...]

  • Page 17

    Reference Manual 300530EN, Rev BA September 20 12 2-3 Rosemount 2410 Section 2. Overview 2.1.1 Communication The Raptor system support s various communication interfaces between a Rosemount 2410 and a T ank Master PC or other host computers as illustrated in Figure 2-2 to Figure 2 -4. Both the Primary bus a nd the Secondary bus can be used for eith[...]

  • Page 18

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 2-4 Section 2. Overview A THUM Adapter , connected to t he Intrinsically Safe Secondary (1) bus, allows wireless communication between a 2410 T ank Hub and a Smart Wireless Gateway . Figure 2-4. T y pical configur ation of a Rosemount 2410 with wireless connection to Smart Wireless Gat[...]

  • Page 19

    Reference Manual 300530EN, Rev BA September 20 12 2-5 Rosemount 2410 Section 2. Overview 2.2 COMPONENT S Figure 2-5. Ros emount 2410 component s 1. Intrinsically safe terminal compa rtment 2. Non-intrinsically safe terminal compartment 3. Integral dis play (optional) 4. Write protection switch 5. Cable entries for IS connection (two ½ - 14 NPT) 6.[...]

  • Page 20

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 2-6 Section 2. Overview 2.3 SYSTEM OVERVIEW Raptor is a state-of-th e art inventory and custody transfer radar tank leve l gauging sy stem. It is de veloped for a wide range of applications at refineries, tank farms and fuel depots, and fulfills the highest requirement s on performance[...]

  • Page 21

    Reference Manual 300530EN, Rev BA September 20 12 2-7 Rosemount 2410 Section 2. Overview Figure 2-6. Raptor system architecture 2230 Display 2240S T emperatu re T ransmitter 5900S Radar Level Gauge 2410 T ank Hub Ta n k b u s 5300 Level T ransmitter 5400 Level T ransmitter 3051S Pressure T ransmitter TRL2 Modbus Group bus 2180 Field Bus Modem 2160 [...]

  • Page 22

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 2-8 Section 2. Overview Figure 2- 7. Raptor sy stem architecture for wir eless systems 2230 Display 2240S T emperature T ransmitter 5900S Radar Level Gauge 2410 T a nk Hub 3051S Pressure T ransmitter Smart Wireless Gateway T ankMast er PC 644 644 644T empe rature T ransmitter NON-HAZAR[...]

  • Page 23

    Reference Manual 300530EN, Rev BA September 20 12 2-9 Rosemount 2410 Section 2. Overview T ankMast er HMI Software T ankMaste r is a powerful Windows-based Human Machine Interface (HMI) fo r complete tank inve ntory management. It provides configuration, service, set-up, inventory , and custody transfer functio ns for Raptor systems and other suppo[...]

  • Page 24

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 2-10 Section 2. Overview The Rosemount 5900S sends micr owaves towards the su rfac e of the product in the tank. Th e level is calculated ba sed on the echo from the surface. No part of the 5900S is in actual cont act with the product in the tank, and the antenna is the only p art of t[...]

  • Page 25

    Reference Manual 300530EN, Rev BA September 20 12 2-1 1 Rosemount 2410 Section 2. Overview Rosemount Smart Wireless Gateway and Rosemount Smart Wire less THUM Adapter A THUM Adapter allows wireless communication between a 2410 T ank Hub and a Smart Wireless Gateway . The gateway is the network manager that provides an interface between field de vic[...]

  • Page 26

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 2-12 Section 2. Overview 2.4 INST ALLATION PROCEDURE Follow these steps for a prope r installation: Review Mounting Considerations . See “Installation Considerations” on page 3-2. Mount the 2410. See “Mechanical Installation” on page 3-3. Wire the 2410. See “Electrical Instal[...]

  • Page 27

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 www .rosemount-tg.com Section 3 Inst allation 3.1 Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . p age 3-1 3.2 Inst allation Consideration s . . . . . . . . . . . . . . . . . . . p age 3-2 3.3 Mechanical Installation . . . . . . . . . . . . . . . . . . . . . . [...]

  • Page 28

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 3-2 Section 3. Installation 3.2 INST ALLATION CONSIDERATIONS The Rosem ount 2410 T ank Hub ma y be installed on v arious location s at the plant. Mounting at the tank fo ot may be convenient when you would like to have easy access to measuring data, diagnostics and other inform ation o[...]

  • Page 29

    Reference Manual 300530EN, Rev BA September 20 12 3-3 Rosemount 2410 Section 3. Installation 3.3 MECHANICAL INST ALLATION The Rosemount 2410 is designed for moun ting on a pipe stand or on a wall. NOTE! Ensure that the 2410 is installe d to minimize vibration and mechanical shock. 3.3.1 Pipe Mounting 1. Attach the bracket to the pipe. 2. Ensure th [...]

  • Page 30

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 3-4 Section 3. Installation 3.3.2 W all Mounting 1. Mount the bracket on the wall by using four M8 screws and flat washers. Note ! Countersunk screws are not suitable. 2. Attach the 2410 to the bracket and tighten the screw . 70 mm 70 mm 94 mm 94 mm Ø 9 mm Screw[...]

  • Page 31

    Reference Manual 300530EN, Rev BA September 20 12 3-5 Rosemount 2410 Section 3. Installation 3.4 ELECTRICAL INST ALLATION 3.4.1 Cable Entries The Rosemount 2410 electronics hou sing has four ½ - 14 NPT and two ¾ - 14 NPT entries. The connections must be made in accordance with local or plant electrical code s. Make sure that unus ed ports are pro[...]

  • Page 32

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 3-6 Section 3. Installation 3.4.4 Grounding The housing should always be grounde d in accordance with national and local electrical codes. Failu re to do so may impair the protection provide d by the equipment. The most ef fective ground ing method is dir ect connection to earth ground[...]

  • Page 33

    Reference Manual 300530EN, Rev BA September 20 12 3-7 Rosemount 2410 Section 3. Installation 3.4.6 Power Budget The Rosemount 2410 T ank Hub delivers 250 mA to the T ankbus. In Smart Wireless systems a 2410 T ank Hub eq uipped with active ana log inputs/output s may deliver 200 mA. The number of ta nks served by the 2410 depends on the type of conn[...]

  • Page 34

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 3-8 Section 3. Installation 3.4.7 T ankbus The Raptor system is easy to inst all and wire. Devices can be “daisy-chain ed” thus reducing the number of ex ternal junction boxes. In a Raptor system the field device s communicate with a R osemount 2410 T ank Hub via the intrinsically [...]

  • Page 35

    Reference Manual 300530EN, Rev BA September 20 12 3-9 Rosemount 2410 Section 3. Installation Since the field devices on the T ankbus must have at least a 9 V input voltage at their terminals, you will have to t ake into account the vo ltage drop in the fieldbus cables. Dista nces are normally quite short between the Rosemount 2410 T ank Hub and fie[...]

  • Page 36

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 3-10 Section 3. Installation Example 1 The example illustrated in Figure 3-2 in cludes a tank located 300 m away from a Rosemount 2410 T ank Hub acting as power supply . In the calculations below it is assumed that the cable length between the field de vices on the tank can be ign ored[...]

  • Page 37

    Reference Manual 300530EN, Rev BA September 20 12 3-1 1 Rosemount 2410 Section 3. Installation Example 2 The second example, illust rated in Figure 3-3, includes two tanks with a Rosemount 2410 T ank Hub acting as power supply to the field devices on both tanks. The first ta nk is located 300 m away from the 2 410 T ank Hub and the second tank a fu[...]

  • Page 38

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 3-12 Section 3. Installation T ankbus Segment Coupler In case “d aisy-chain” co nnection is not suitable, a T ankbus Segm ent Coupler (1) can be used to connect the various devices to th e Raptor T ankbus. Features: • Entity and FISCO compliant • adjustabl e short-circuit limit[...]

  • Page 39

    Reference Manual 300530EN, Rev BA September 20 12 3-13 Rosemount 2410 Section 3. Installation Figure 3-5. Segment coupler In case there ar e different device type s connected to the segment couple r , set the current limitation switch (3 ) to the closest value abo ve the largest curr ent consumptio n of the connected de vices. See “Power Bud get?[...]

  • Page 40

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 3-14 Section 3. Installation Figure 3-6. Example of Raptor system with field devices connected to the T ankbus via segment couplers T ankbus (trunk) (Spur<60 m) (Spur<60 m) 2410 T an k Hub 5400 Level T ransmitter 644 T em perature Tr a n s m i t t e r Segment coupler 2240S T em p[...]

  • Page 41

    Reference Manual 300530EN, Rev BA September 20 12 3-15 Rosemount 2410 Section 3. Installation 3.4.8 T ypical Inst allations The example below (Figure 3-7) illustrates a Raptor system with daisy-chained fi eld devices on a single tank. T erminators are inst alled at both ends of the fieldbus se gment as required in a F OUNDATION fieldbus syst em. In[...]

  • Page 42

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 3-16 Section 3. Installation Figure 3-8 illustrates an example with a 2- in-1 version of th e 5900S in a SIL safety insta llation. A 4-wire cable is used to connect the Primary and Secondary T ankbuses through the same cab le entry . The SIL alarm wire is connected through a sep arate [...]

  • Page 43

    Reference Manual 300530EN, Rev BA September 20 12 3-17 Rosemount 2410 Section 3. Installation Figure 3-9 illustrates an example with four tanks connected to a Rosemount 2410 T ank Hub (requires 2410 with multiple tanks option). T he field devices are connected to a segment couple r at the end of the T ankbus. A separa te bus terminator is not requi[...]

  • Page 44

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 3-18 Section 3. Installation Figure 3-10 illustrates an example with a number of tanks daisy-chained to a Rosemount 2410 T ank Hub (requires multiple tanks option). If a Raptor field device is connecte d to the end of the T ankbus (fieldbus segment), the built-in term inator can be use[...]

  • Page 45

    Reference Manual 300530EN, Rev BA September 20 12 3-19 Rosemount 2410 Section 3. Installation Figure 3-1 1 illustrates an example with three t anks connected to a Rosemount 2410 T ank Hub (require s multiple tanks option) . For each tank th e field devices are connected to the T ankbus via a segment coupler . The fieldbus segme nt needs to be termi[...]

  • Page 46

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 3-20 Section 3. Installation In case the last device on the T ankbus has no internal termin ator , an external terminator (1) according to FISCO model a nd Entity model can be used instead. It can be screwed into a free cable gla nd on the device. Figure 3- 12. Example of Raptor system[...]

  • Page 47

    Reference Manual 300530EN, Rev BA September 20 12 3-21 Rosemount 2410 Section 3. Installation 3.4.9 Cabling for the TRL2/RS485 Bus In a Raptor system a Rosemount 2410 T ank Hub communicates with a 216 0 Field Communication Unit using th e TRL2/RS485 Modbus protocol, see Section 2: Overv iew . TRL2 Bus The TRL2 bus requires twisted and sh ielded pa [...]

  • Page 48

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 3-22 Section 3. Installation 3.4.10 Non-IS Connection The non-IS explosion-proof/flam eproof compartment has a terminal block fo r connecting power sup ply , communication buse s to host systems, relay outputs, and HART 4-20 m A analog in put and ou tput. 1. Ensure that the power supp [...]

  • Page 49

    Reference Manual 300530EN, Rev BA September 20 12 3-23 Rosemount 2410 Section 3. Installation Conductor Recommendat ions Ensure that you use cables suitable fo r the termina l block of the 2410. The terminal block is designed for cables that meet the sp ec ifications as illustrated below . Figure 3-15. Conductor and insulation requirements T able 3[...]

  • Page 50

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 3-24 Section 3. Installation Use a screw driver to insert the conduct or into the terminal block as illustrated in Figure 3 -16. Figure 3-16. Use a screw driver to connect the conductor to the terminal block 2 1 Conductor T erminal b lock[...]

  • Page 51

    Reference Manual 300530EN, Rev BA September 20 12 3-25 Rosemount 2410 Section 3. Installation 3.4.1 1 Non-IS T erminal Block Figure 3-17. T erminal block in the explosion- proof/flame proof compartment T able 3-8. T erminal assignment for non-intrinsically sa fe side (XP/Exd/Exe) Power Supply The Rosemount 2410 accept s supply voltage 24-48 Vdc and[...]

  • Page 52

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 3-26 Section 3. Installation Relay Output s There are two optional relay ou tputs. Y ou can ch oose Normally Open (NO) or Normally Closed (NC) by setting a switch as described in “Relay Output Configurat ion” on page 6-15. NO and NC refers to the contact posi tion when a relay is d[...]

  • Page 53

    Reference Manual 300530EN, Rev BA September 20 12 3-27 Rosemount 2410 Section 3. Installation Non-IS T erminal Block for SIL Safety Systems For Safety Integrity Level (SIL) systems the Rosemount 2410 ha s a terminal block on the Non- IS side with connect ion to a SIL Alarm Relay outp ut. Figure 3-18. Non-IS (XP/Exd/Exe) terminal block T able 3-10. [...]

  • Page 54

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 3-28 Section 3. Installation 3.4.12 IS Connection The IS comp artment has a terminal block for connecting th e intrinsically safe T ankbus for communication with field devic es on the tank. This terminal b lock is also used for intrinsically safe HAR T 4-20 mA analog input/output commu[...]

  • Page 55

    Reference Manual 300530EN, Rev BA September 20 12 3-29 Rosemount 2410 Section 3. Installation 3.4.13 Intrinsically Safe Te r m i n a l B l o c k The Intrinsically safe side of the Ro semount 2410 T ank Hub connects to the T ank bus which commu nicates with field devi ces on the tank. Figure 3-20. Intr insically safe terminal block T able 3-1 1. T e[...]

  • Page 56

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 3-30 Section 3. Installation IS T erminal Block for SIL Safety Systems For Safety Integrit y Level ( SIL) system s the Rosem ount 2410 h as a terminal block with a SIL Alarm output for connection to a Rosemount 5900S Radar Level Gauge. Figure 3-21. IS/Exi terminal block for SIL systems[...]

  • Page 57

    Reference Manual 300530EN, Rev BA September 20 12 3-31 Rosemount 2410 Section 3. Installation 3.4.14 Wiring Diagrams Figure 3-22. Wiring diagram on the intrinsically safe (IS/Exi) side ROSEMOUNT 2410 Rosemount 5900S Rosemount 2240S T erminal b lock on intrinsically safe side Rosemount 2230 Intrinsically safe Ta n k b u s Not used (future op tion) I[...]

  • Page 58

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 3-32 Section 3. Installation Figure 3- 23. Wiring diagram on the non-intrinsically safe (XP/Exd/Exe) side Figure 3- 24. Wiring diagram for Rosemount 2410 and Rosemount 5900S in a SIL safety system Relay outputs Power supply Modem ROSEMOUNT 2 410 Secondary bus Primary bus T erminal b lo[...]

  • Page 59

    Reference Manual 300530EN, Rev BA September 20 12 3-33 Rosemount 2410 Section 3. Installation Rosemount 5900S Radar Level G auge Rosemount 2410 Ta n k H u b SIL Alarm Relay SIL Alarm Output Ta n k b u s Exi Exd/Exe[...]

  • Page 60

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 3-34 Section 3. Installation[...]

  • Page 61

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 Series www .rosemount-tg.com Section 4 Configuration 4.1 Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . p age 4-1 4.2 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p age 4-2 4.3 Configuration T ools . . . . . . . . . . . . . . . .[...]

  • Page 62

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 Series 4-2 Section 4. Configuration 4.2 INTRODUCTION A Raptor system includes a wide range of devices for t ank monitoring. It is a flexible and scalable system wh ich can be adapted to various applications and small or large t ank farms. A typical Raptor system includes one or more of[...]

  • Page 63

    Reference Manual 300530EN, Rev BA September 20 12 4-3 Rosemount 2410 Series Section 4. Configuration 4.4 BASIC CONFIGURATION OF A ROSEMOUNT 2410 This is a general descript ion of how to con figure a Rosemoun t 2410 T an k Hub. The Raptor Syst em Configur ation Manual (Document no . 300510EN) provides a det ailed description of how to use the T ankM[...]

  • Page 64

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 Series 4-4 Section 4. Configuration 4.5 ADVANCED CONFIGURATION The installation wizard in T ankMaster Winsetup comprises a basic configuration of the Rosemount 241 0. There are more options available in case further configuration is needed : • Primary/Secondary Bus configu ration •[...]

  • Page 65

    Reference Manual 300530EN, Rev BA September 20 12 4-5 Rosemount 2410 Series Section 4. Configuration 4.6.1 Inst allation Wiza rd The T ankMaster W inSetup wizard is t he recommended tool for installing the Rosemount 2410. It suppor ts basic configuration of the 2410 . T o configu re a 2410 do the following: 1. S tar t the installation wizard in T a[...]

  • Page 66

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 Series 4-6 Section 4. Configuration 4.6.3 FCU 2160 Configuration In case the system includes a 2160 Fie l d Communication Unit (FCU), it has to be installed prior to installing the Ro semount 2410 T ank Hub. The following is a brief description of how to install a 21 60 FCU. See the Ra[...]

  • Page 67

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 www .rosemount-tg.com Section 5 Operation 5.1 Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . p age 5-1 5.2 Integral Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p age 5-2 5.4 Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . [...]

  • Page 68

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 5-2 Section 5. Operation 5.2 INTEGRAL DISPLAY The Rosemount 2410 T ank Hub can be equi pped with an optional integral display for present ation of measurement dat a and diagnostics. When the device is switched on, the display presen ts information such as device model, communication pr[...]

  • Page 69

    Reference Manual 300530EN, Rev BA September 20 12 5-3 Rosemount 2410 Section 5. Operation T able 5-1. Measurement variables and pres entation on the Rosemount 24 10 display Va r i a b l e Present ation on dis play Description Level LEVEL Product level Ullage ULLAGE Distance from the upper reference point to the product surface Level Rate LRA TE The[...]

  • Page 70

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 5-4 Section 5. Operation 5.3 ST ART-UP INFORMATION When the Rosemount 2410 st arts up , all LCD segments light up for approximately 5 seconds. The st art-up information appears on the display when the software initia lization procedure is finished. The Primary Bus configuration appears[...]

  • Page 71

    Reference Manual 300530EN, Rev BA September 20 12 5-5 Rosemount 2410 Section 5. Operation 5.4 ERROR MESSAGES In addition to pr esenting measurement values, the display can show sof tware and hardwar e error messag es. In case of an erro r , th e upper row shows “ERROR” and the lower r ow toggles between “F AIL” and the er ror code. Figure 5[...]

  • Page 72

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 5-6 Section 5. Operation 5.5 LED There ar e three Ligh t Emitting Diod es (LED) o n the Rosemo unt 2410 f ront for status and e rror information. Figure 5-3. The Rosemount 2410 has three LED s The following color codes a re used for the 2410 LEDs: T able 5-4. LED color codes 5.5.1 LED [...]

  • Page 73

    Reference Manual 300530EN, Rev BA September 20 12 5-7 Rosemount 2410 Section 5. Operation 5.5.2 Error LED In normal op eration the Error LED (R ed) is turne d off. In case a dev ice error occurs, the LED will flash a sequence th at corresponds to the error code followed by a five second pa use. Figure 5-4. Error codes are presented by the Error LED[...]

  • Page 74

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 5-8 Section 5. Operation 5.6 SPECIFYING DISPLAY V ARIABLES The Rosemount 2410 can be configured to present measurement dat a on the optional integral displa y . Measurement data such as Level, Level Rate, Free W ater Level and many other tank variab les can be displayed. Measurem ent u[...]

  • Page 75

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 www .rosemount-tg.com Section 6 Service and T roubleshooting 6.1 Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . p age 6-1 6.2 Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p age 6-2 6.3 T roubleshooting . . . . . . . . . . . . [...]

  • Page 76

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 6-2 Section 6. Service and Troubleshoo ting 6.2 SERVICE This section briefly describes func tion s which may be useful for service and maintenance of a Rosemount 2410 T ank Hub. If not otherwise st ated, most examples are based on using the T ankMaster WinSetup to ol to access these fu[...]

  • Page 77

    Reference Manual 300530EN, Rev BA September 20 12 6-3 Rosemount 2410 Section 6. Service and Troubl eshooting 4. Choose Predefined for a basic selection of registers. Choose the All option if you would like to view a ran ge of registers by your own choice. For the All option, specify a range of registers by setting a st art value in the St art Regis[...]

  • Page 78

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 6-4 Section 6. Service and Troubleshoo ting 6.2.3 Device Live List The 2410 Hu b Device Live List let s you view devices connected to the T ankbus. Y ou can, for example, see the Device Id, T ag, and whether the devices are configured or not. The Device Live List is us eful when yo u a[...]

  • Page 79

    Reference Manual 300530EN, Rev BA September 20 12 6-5 Rosemount 2410 Section 6. Service and Troubl eshooting 6.2.4 Configuration Backup Input and Holding Reg isters of the Rosemount 2410 T ank Hub can be stored on disk, which can be usefu l for back up purposes and trouble shooting. Y ou can save a prede fined set of Holding Registers to make a bac[...]

  • Page 80

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 6-6 Section 6. Service and Troubleshoo ting 6.2.5 Configuration Recovery T ankMaster WinSetup of fers the opti on to replace th e current Holding Register database with a ba ckup database stored on disk. This can be useful, for example, if you would like to recove r configuration data.[...]

  • Page 81

    Reference Manual 300530EN, Rev BA September 20 12 6-7 Rosemount 2410 Section 6. Service and Troubl eshooting 6.2.6 Diagnostics T ankMaste r WinSetup offers the option to view diagnostic registers for the Rosemount 2410 T ank Hub. The diagnostic registe rs are selected from available Input and Holding Registers to pro vide a quick overview of the cu[...]

  • Page 82

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 6-8 Section 6. Service and Troubleshoo ting 6.2.7 Device Sof tware Upgrade The Rosemou nt T ankMaster WinSetup program allows you to upgrade the 2410 T ank Hub and other Raptor devices with new software. T o upgrade a device with new softwar e do the following: 1. Ensure that the lates[...]

  • Page 83

    Reference Manual 300530EN, Rev BA September 20 12 6-9 Rosemount 2410 Section 6. Service and Troubl eshooting c. From the A vailable Devices pa ne choose a 2410 T ank Hub to be programmed and click the Move bu tton. d. Repeat for each device to be programmed. Use the Remove b utton if you want to change the list of devices to be programmed. 7. Click[...]

  • Page 84

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 6-10 Section 6. Service and Troubleshoo ting 6.2.8 Write Protection A Rosemount 24 10 T ank Hub can be write protec ted to avoid uninten tional configuration changes whe n using the T ankMaster programs. T o write protect the 2410 T ank Hub: 1. S t art the T ankMaster WinSetup program.[...]

  • Page 85

    Reference Manual 300530EN, Rev BA September 20 12 6-1 1 Rosemount 2410 Section 6. Service and Troubl eshooting 6.2.9 Write Protection Switch A switch on th e front of th e Rosemoun t 2410 T ank Hub can be used to prevent unauthor ized changes of the holding registe r database. Figure 6-2. T he 2410 T ank Hub write protectio n switch on the built-in[...]

  • Page 86

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 6-12 Section 6. Service and Troubleshoo ting 6.2.10 Simulation Mode The Simulation M ode function lets you verify comm unication be tween a Rosemount 24 10 T a nk Hub and a ho st syst em without connecting actual field devices. The 2410 T ank Hub Simula tion window allows you to choose[...]

  • Page 87

    Reference Manual 300530EN, Rev BA September 20 12 6-13 Rosemount 2410 Section 6. Service and Troubl eshooting Figure 6-4. Simulation mode active is indicated in the WinSetup wor kspace NOTE Simulation continues for the specifie d period of time. It can also be stopped manually at any time by pressing the S top button in the Simulation window . Adva[...]

  • Page 88

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 6-14 Section 6. Service and Troubleshoo ting 6.2.1 1 T esting the Relays The Manual Control of Relay function let s you manually open or close th e Rosemount 2410 T ank Hub built-in relays in order to verify the relay function. After the specified Safety Reset T ime th e relay automati[...]

  • Page 89

    Reference Manual 300530EN, Rev BA September 20 12 6-15 Rosemount 2410 Section 6. Service and Troubl eshooting 6.2.12 Relay Output Configuration T o change the Normallly Open/Normally Closed setti ngs of the K1 and K 2 relays, do the following: 1. Disconnect the power sup ply . Figure 6-5. Ros emount 2410 T ank Hub front v iew 2. Remove the front co[...]

  • Page 90

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 6-16 Section 6. Service and Troubleshoo ting 6.2.13 Loading the Default Dat abase The various configuration p arameters of the 2410 T ank Hub is stored in a Holding Registe r database . The Holding Register fac tory setting is stored in the default dat abase . T ankMaster WinSetup offe[...]

  • Page 91

    Reference Manual 300530EN, Rev BA September 20 12 6-17 Rosemount 2410 Section 6. Service and Troubl eshooting 6.2.14 Logging Measurement Dat a The Rosemount 2410 supports logging of diagnostic registers. This function is useful for verifying that the gauge wor ks prop erly . The logging fun ction can be accessed by using the T ankMaster WinSetup pr[...]

  • Page 92

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 6-18 Section 6. Service and Troubleshoo ting 6 . 3 T ROUBLESHOOTING T able 6-3. T roubleshooting chart Symptom Possible cause Action No contact with the Rosemount 2410 T ank Hub Wiring • Check that wires are properly connected to the terminals. • Check for dirty or defe ctive termi[...]

  • Page 93

    Reference Manual 300530EN, Rev BA September 20 12 6-19 Rosemount 2410 Section 6. Service and Troubl eshooting No communication with one or more devices on the T ankbus Wiring • Check that the devices appear in the Device Live List (see “Device Live List” on page 6-4). • Check diagnostics info rmati on, see “Diagnostics” on page 6-7 for [...]

  • Page 94

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 6-20 Section 6. Service and Troubleshoo ting T ankMaster does not present measurement data from one or more devices connected to the T ankbus. The devices communicate on the T ankbus and appear in the Device Live List. Incorrect configuration of the 2160 F CU slave database • Check t[...]

  • Page 95

    Reference Manual 300530EN, Rev BA September 20 12 6-21 Rosemount 2410 Section 6. Service and Troubl eshooting Incorrect level reading from radar level gauge Configuration error • Check configuration of the level gauge; in T ankMaster Winsetup open Properties for the level gauge associated with the tank. • See the Rosemount 5900 S Reference Manu[...]

  • Page 96

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 6-22 Section 6. Service and Troubleshoo ting 2410 icon in T ankMaster WinSetup is red Simulation mode active • S top simulation mode; open WinSetup Set Simulation Mode window and click the S top button. All measurement values are indicated with “SensFail” in the WinSetup T ank Vi[...]

  • Page 97

    Reference Manual 300530EN, Rev BA September 20 12 6-23 Rosemount 2410 Section 6. Service and Troubl eshooting 6.3.1 Device St atus The curr ent device status is shown in Input Register 10 00 . Y ou can view the device status re gister by opening the Diagnostic window (see “Diagnostics” on page 6- 7) or the View Input Registers window (see “Vi[...]

  • Page 98

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 6-24 Section 6. Service and Troubleshoo ting 6.3.2 W arning Messages W arning messages are displayed in the Rosemount T ankmaster program. Input Register 100 4 provides an overview of ac tive device warnings (see “Diagnostics” on p age 6-7 or “Viewing Input and Holding Registers?[...]

  • Page 99

    Reference Manual 300530EN, Rev BA September 20 12 6-25 Rosemount 2410 Section 6. Service and Troubl eshooting Map conflict tank no. Input register no. 6260 Check that tank measurement variables are mapped to the right source parameters (In T ankMaster Winsetup, right-click the A TD device icon associated with the current tank, and click the Propert[...]

  • Page 100

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 6-26 Section 6. Service and Troubleshoo ting 6.3.3 Error Messages Error messages may be displayed on the Rosem ount 2410 integral display and in the Rosemount T ankmaster progra m. Y ou also have the option to view Input Register 100 2 for an overview of active device errors (see “Di[...]

  • Page 101

    Reference Manual 300530EN, Rev BA September 20 12 6-27 Rosemount 2410 Section 6. Service and Troubl eshooting Other Memory Error Input register no. 6108: Bit 0: CheckSum Bit 1: S tack Contact Emerson Process Management/Rosemount T ankGauging service department Sys Error Input register no. 61 10. Bit 0: T ask Supervisor Display Error Input register [...]

  • Page 102

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 6-28 Section 6. Service and Troubleshoo ting[...]

  • Page 103

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 www .rosemount-tg.com Appendix A Reference Dat a A.1 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p age A-1 A.2 Dimensional drawings . . . . . . . . . . . . . . . . . . . . . . . page A-4 A.3 Ordering Information . . . . . . . . . . . . . . . . . . . . . .[...]

  • Page 104

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 A-2 Appendix A. Reference Data Analog input/output electrical characteristics Analog Input Maximum number of input channels: 1 Input Current range: 0 - 23 mA Configurable Min and Max alarm limits. Lift-off voltage (Passi ve IS and NON-IS): 10.5V Max input voltage (Passive IS and NON-IS[...]

  • Page 105

    Reference Manual 300530EN, Rev BA September 20 12 A-3 Rosemount 2410 Appendix A. Reference Data Mechanical Housing m aterial Polyurethane-covered die-cast aluminum Installation Can be installed on a 33.4-60.3 mm (1-2 in.) diameter pipe or wall Dimensi ons See “Dimensional drawin gs” on page A-4. Weig ht 4.7 kg (10.4 lbs) Environment Ambient tem[...]

  • Page 106

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 A-4 Appendix A. Reference Data A.2 D IMENSIONAL DRAWINGS Figure A-1. Rosemount 241 0 dimensions 254 mm 193 mm 164 mm[...]

  • Page 107

    Reference Manual 300530EN, Rev BA September 20 12 A-5 Rosemount 2410 Appendix A. Reference Data A.3 O RDERING INFORMATION Model (Pos 1) Product Description Note 2410 T ank Hub Code (Po s 2) T ankbus: Number o f T anks Note S S ingle tank M Multiple tanks Maximum 5 Rosemount 5300/5400 transmitters can be connected to one T ank Hub Code (Po s 3) T an[...]

  • Page 108

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 A-6 Appendix A. Reference Data Code (Pos 8) Integral Display Note 1 LCD 0 None Code (Pos 9) Power Supply Note P Extended input range: 48- 240 V AC at 50/60 Hz, and 24-48 VDC Code (Pos 10) Sof tware Note S S tandard Code (Pos 1 1) Hazardous Locatio n Certification Note E1 A T EX Flamepr[...]

  • Page 109

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 www .rosemount-tg.com Appendix B Product Certifications B.1 Safety messages . . . . . . . . . . . . . . . . . . . . . . . . . . . p age B-1 B.2 EU Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p age B-2 B.3 Hazardous Locations Certifications . . . . . . . . . . .[...]

  • Page 110

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 B-2 Appendix B. Product Certifications B.2 E U CONFORMITY The EC declaratio n of confor mity for a ll applicable European directives for this product can be found on the Rosem ount website at www .rosemount.co m. A hard copy may be obt ained by contacting our local sales r epresentativ[...]

  • Page 111

    Reference Manual 300530EN, Rev BA September 20 12 B-3 Rosemount 2410 Appendix B. Product Certifications B.3 H AZARDOUS LOCATIONS CERTIFICATIONS The Rosemou nt 2410 T ank Hubs that have the followin g labels attached have been certified to comply with the requir ements of the appr oval agencies noted. B.3.1 Factory Mutual US Approvals Certificate of[...]

  • Page 112

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 B-4 Appendix B. Product Certifications HART/4-20 mA ENTITY IS I/O Option Active Current Loop XP-AIS CL I, DIV . 1 GP C & D AEx de[ia IIC] IIB U o = 23.1 V , I o = 95.3 mA, P o = 550 mW Group IIC: C o  0.14  F, L o  3.9 mH Group C, IIB: C o  1.0  F, L o  15 m[...]

  • Page 113

    Reference Manual 300530EN, Rev BA September 20 12 B-5 Rosemount 2410 Appendix B. Product Certifications B.3.2 Factory Mutual Canadian Approvals Certificate of Co mpliance: 3035492C. Figure B-2. Factory Mutual Canadian approval labels E6 FISCO Power Supply Explosion Proof Class I, Division 1, Groups C and D Dust-ignitionproof Class II and III, Divis[...]

  • Page 114

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 B-6 Appendix B. Product Certifications HART/4-20 mA ENTITY IS I/O Option Active Current Loop XP-AIS CL I, DIV . 1 GP C & D Ex de[ia IIC] IIB U o = 23.1 V , I o = 95.3 mA, P o = 550 mW Group IIC: C o  0.14  F, L o  3.9 mH Group C, IIB: C o  1.0  F, L o  15 mH[...]

  • Page 115

    Reference Manual 300530EN, Rev BA September 20 12 B-7 Rosemount 2410 Appendix B. Product Certifications B.3.3 European A TEX Directive Information The Rosemount 2410 T ank Hubs that hav e the followi ng label attached hav e been certified to co mply with Directive 94/9/EC of the European Parliament and the Council as published in the Of ficial Jour[...]

  • Page 116

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 B-8 Appendix B. Product Certifications FISCO Power Supply Ex de[ib] IIB T4 (-50 °C   Ta   +70 °C) U o =15V , l o =354mA, P o =5.32W Um=250 V HART/4-20 mA ENTITY IS I/O Option Active Current Loop Ex de[ia IIC] IIB T4 (-50 °C<T a<+70 °C) U o = 23.1 V , I o = 95.3 mA[...]

  • Page 117

    Reference Manual 300530EN, Rev BA September 20 12 B-9 Rosemount 2410 Appendix B. Product Certifications B.3.4 IECEx Approval Figure B-4. IEC Ex approval labels E7 The following information is provided as par t of the label of the device • Name and a ddress of the manufacture r (Rosemount) • Model number • Serial number of the device • IECEx[...]

  • Page 118

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 B-10 Appendix B. Product Certifications FISCO Power Supply Ex de[ib] IIB Gb T4 (-50 °C  Ta  +70 °C) U o =15V , l o =354mA, P o =5.32W Um=250 V HART/4-20 mA ENTITY IS I/O Option Active Current Loop Ex de[ia IIC Ga] IIB Gb T4 (-50 °C<T a< +70 °C) U o = 23.1 V , I o [...]

  • Page 119

    Reference Manual 300530EN, Rev BA September 20 12 B-1 1 Rosemount 2410 Appendix B. Product Certifications B.4 A PPROVAL DRAWINGS Follow the installation gui delines presented in Factory Mutual system control drawings in order to maintain cert ified r atings for installed devices. The following drawing is included in the documentation for the Rosemo[...]

  • Page 120

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 B-12 Appendix B. Product Certifications[...]

  • Page 121

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 www .rosemount-tg.com Appendix C Advanced Configuration C.1 Safety messages . . . . . . . . . . . . . . . . . . . . . . . . . . . p age C-1 C.2 Advanced Configuration in W inset up . . . . . . . . . . page C-3 C.3 Primary Bus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

  • Page 122

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 C-2 Appendix C. Advanced Configuration High voltage that may be present on leads could cau se electrical shock: Avoid contact with leads and terminals. Make sure the mains power to the Radar Transmitter is off and the lines to any other external power source are disconnecte d or not po[...]

  • Page 123

    Reference Manual 300530EN, Rev BA September 20 12 C-3 Rosemount 2410 Appendix C. Advanced Configuration C.2 A DVANCED CONFIGURA TION IN WINSETUP There are advanced config uration options for the Rosemount 2410 T ank Hub which are not included in the T ankMaster WinSetup inst allation wizard. These options are available via the Properties option in [...]

  • Page 124

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 C-4 Appendix C. Advanced Configuration C.3 P RIMARY BUS The Rosemount 2410 has a Prim ary Bus which is used for communication with a Rosemoun t 2160 Field Comm unicat ion Unit (FCU) or a control room computer . The Primary Bus supports TRL2 and RS-485 bu s communication. T o open the P[...]

  • Page 125

    Reference Manual 300530EN, Rev BA September 20 12 C-5 Rosemount 2410 Appendix C. Advanced Configuration C.4 S ECONDARY BUS The Rosemount 2410 Secon dary Bus is used for communication with emulated devices. It support s protocols such as the TRL2 Modbus, Enraf, V arec, L&J, and Profibus. T o open the Secondary Bus window: 1. In the WinSetup work[...]

  • Page 126

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 C-6 Appendix C. Advanced Configuration C.5 R ELAY OUTPUT The Rosemount 2410 has two relays which can be configured with one or two set points. Control mode (auto/ disabled), relay output source, set-point etc. can be specified. T o open the 2410 T ank Hu b Virtual Relay window: 1. In t[...]

  • Page 127

    Reference Manual 300530EN, Rev BA September 20 12 C-7 Rosemount 2410 Appendix C. Advanced Configuration Virtual Relay St ates There are thre e virtual relay states available: T able C-1. 2410 Relay S tates Virtual Relay Output The Vi rtual Relay Output setting determines whether the relays are active or disabled. T able C- 2. 2410 R elay Control Mo[...]

  • Page 128

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 C-8 Appendix C. Advanced Configuration Relay output configuration The relay output can be selected as either Normally Open or Normally Closed referring to the co ntact position when the relay is de-ener gized. This also refers to the Alarm (Reset) state. The relay terminology ca n be s[...]

  • Page 129

    Reference Manual 300530EN, Rev BA September 20 12 C-9 Rosemount 2410 Appendix C. Advanced Configuration Relay Zones Y ou can use on e or two set points for relays connecte d to the Rosemount 2410 T ank Hub. Consequently , there are two or three zones in which different relay states can be specified. For ea ch zone you can set any of the three avail[...]

  • Page 130

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 C-10 Appendix C. Advanced Configuration C.6 HYBRID DENSITY CALCULATION The Rosem ount T ankMaster sof tware can be used in a hybrid density system to calculate Observed Density . Density calculations are also available for a host system connected directly to a Rosemount 2410 with out u[...]

  • Page 131

    Reference Manual 300530EN, Rev BA September 20 12 C-1 1 Rosemount 2410 Appendix C. Advanced Configuration 6. In the 22XX A TD / Advanced Parameter Source Co nfiguration wind ow , ensure that the V apor Pressure (P3) and Liquid Pressure (P1) paramete rs are mapped to the actual source devices on the t ank. In case there is no vapor pr essure sensor [...]

  • Page 132

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 C-12 Appendix C. Advanced Configuration C.6.1 Hybrid Density Configuration T o configure the Rosemount 2410 hybrid density function do the following: 1. Open the 2410 T ank Hub/Configuration window . Figure C-8. 2410 Proper ties window 2. Click the Hybrid Density No. [X] button to open[...]

  • Page 133

    Reference Manual 300530EN, Rev BA September 20 12 C-13 Rosemount 2410 Appendix C. Advanced Configuration 3. From the T ank Name/Hub Position list se lect the t ank to be configured for hybrid density calculations. 4. Enter Local Gravity , Air Density and V apor Density . These parameters are used for calculating th e Observ ed Density . See the T a[...]

  • Page 134

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 C-14 Appendix C. Advanced Configuration C.7 V OLUME CONFIGURATION T o c onfigure the Rosemount 24 10 T an k Hub for volu me calculations , choose one of the sta ndard tank shapes, or th e strapping table option, see T able C-4 on page C-15. Select None if volume calculation is not used[...]

  • Page 135

    Reference Manual 300530EN, Rev BA September 20 12 C-15 Rosemount 2410 Appendix C. Advanced Configuration Holding and Input Registers for V olume Configuration Holding registers 4300 to 4732 are used for volume configuration. The diff erent parameters are given in T able C-4 be low (see “Viewing Input and Holding Registers” on p age 6-2 for more[...]

  • Page 136

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 C-16 Appendix C. Advanced Configuration The T ankMaster WinSetup program let s you edit Holding registers for volu me calculations as illust rated in Figure C-10. Figure C-10. Holding re gister view for volume configuration in T ankMaster WinSetup The volume calculation result is avail[...]

  • Page 137

    Reference Manual 300530EN, Rev BA September 20 12 C-17 Rosemount 2410 Appendix C. Advanced Configuration C.8 A RITHMETIC OPERATIONS The Rosemount 2410 T ank Hub support s various arithmetic calculations. Holding Registers 4800 to 4879 are used for up to 10 arithmetic operations. Y ou may perfor m several operations for one or many ta nks. Arithmeti[...]

  • Page 138

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 C-18 Appendix C. Advanced Configuration Arithmetic1 B tank number 4807 T ank for the arithmetic operation parameter B. 0: Not active 1: T ank 1 2: T ank 2 3: T ank 3 4: T ank 4 5: T ank 5 6: T ank 6 7: T ank 7 8: T ank 8 9: T ank 9 10: T ank 10 Arithmetic2 operation 4808 Arithmetic3 op[...]

  • Page 139

    Reference Manual 300530EN, Rev BA September 20 12 C-19 Rosemount 2410 Appendix C. Advanced Configuration C.8.1 Delt a Level Calculation The following example illustrates how to use T ankMaster WinSetup to configure a Rosemount 241 0 to calculate the diff erence between product levels for two tanks Ta n k 1 and Ta n k 3 . The result is stored in tan[...]

  • Page 140

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 C-20 Appendix C. Advanced Configuration[...]

  • Page 141

    Reference Manual 300530EN, Rev BA September 2012 Rosemount 2410 www .rosemount-tg.com Index Numerics 2160 Field Communication Uni t 2-9 , 4-6 2410 . . . . . . . . . . . . . . . . . . . . . 2-9 2410 Tank Hub . . . . . . . . . 2-1 , 2-9 2410 Tank Hub Simulation window 6-12 5300 Guided Wave Radar . . . 2-10 5400 Radar Level Transmi tter 2-10 5900S Rad[...]

  • Page 142

    Rosemount 2410 Index-2 Reference Manual 300530EN, Rev BA September 2012 Relay output . . . . . . . . . . . . . . C-6 Relay output configuration first and second set points C-6 hysteresis . . . . . . . . . . . . . C-6 hysteresis zone . . . . . . . . C-6 jumper settings . . . . . . . . . 6-15 K1, K2 . . . . . . . . . . . . . . . 6-15 Normally Clos ed[...]

  • Page 143

    [...]

  • Page 144

    Reference Manual 300530EN, Rev BA September 20 12 Rosemount 2410 Emerson Process Management © 2012 Rosemount T ank Radar AB. All rights reserved. Rosemount and the Rosemount logotype are trademarks o f Rosemount Inc. HART is a trademark of the HART Communication Foundation. PlantWeb is a trademark of one of the Emer son Process Management group of[...]