HP (Hewlett-Packard) DV8000 manual

Main tenan ce and Ser vice Gui de HP P a v ilio n dv8 000 Noteboo k PC Doc ument P art Number : 40 3 2 4 8-001 No vember 200 5 This guide is a troubleshooting reference used for maintaining and servicing the computer . It provides comprehensi ve information on identifying computer features, components, and spare parts; troubleshooting computer prob[...]

© Copyright 2005 He wlett-Packard De velopment Company , L.P . Microsoft and W indows are U.S. re gistered trademarks of Microsoft Corporation. AMD, T urion, and combinat ions thereof, are trademarks of Advanced Micro De vices, Inc. Bluetooth is a trademark owned by its proprietor and used by He wlett-Packard Compan y under license. SD Logo is a t[...]

Maintenance and Serv ice Guide iii Cont ent s 1 Product Description 1.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2 1.2 Resetting the Computer . . . . . . . . . . . . . . . . . . . . . . . 1–4 1.3 Power Management . . . . . . . . . . . . . . . . . . . . . . . . . . 1–5 1.4 External Components . . . . . .[...]

iv Maintenance and Servi ce Guide Cont en ts 3 Illustrated Parts Catalog 3.1 Serial Number Location . . . . . . . . . . . . . . . . . . . . . . 3–1 3.2 Computer Major Components . . . . . . . . . . . . . . . . . . 3–2 3.3 Display Assembly Subcomponent s . . . . . . . . . . . . . 3–10 3.4 Plastics Kit . . . . . . . . . . . . . . . . . . . . . [...]

Conte nts Maintenance and Servi ce Guide v 5 Removal and Replacement Procedures 5.1 Serial Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–2 5.2 Disassembly Sequence Chart . . . . . . . . . . . . . . . . . . 5–3 5.3 Preparing the Computer for Disassembly . . . . . . . . . 5–5 5.4 Hard Drive . . . . . . . . . . . . . . . .[...]

vi Maintenance and Servi ce Guide Cont en ts 6 Specifications A Connector Pin Assignments B Power Cord Set Requirements C Screw Listing D Display Component Recycling[...]

Maintenance and Serv ice Guide 1–1 1 Product Des c ription The HP Pa vilion dv8000 Notebook PC offers adv anced modularity , AMD T urion™ 64 Mobile T echnology processors, and extensi ve multimedia support. HP P av ilion dv8 000 Notebook PC[...]

1–2 Maintenance and Servi ce Guide Produc t Descr iption 1.1 F e a t u r e s ■ AMD T urion 64 ML-40 (2.2-GHz), ML-37 (2.0-GHz), or ML-30 (1.6-GHz) processors, all with 1-MB L2 cache, or ML-32 (1.8-GHz) processor with 512-MB L2 cache, v arying by computer model ■ 17.0-inch, WSXGA+, TFT (1680 × 1050) with BrightV ie w or 17.0-inch, WXGA+, TFT [...]

Pr oduct Desc ripti on Maintenance and Serv ice Guide 1–3 ■ External 65-watt A C adapter with 3-wire power cord ■ 8-cell Li-Ion battery pack ■ Stereo speakers ■ V olume up, vo lume mute, and volume do wn buttons ■ QuickPlay buttons ■ Support for the follo wing optical driv es: ❏ D VD±R W and CD-R W Double Layer Combo Driv e with Li[...]

1–4 Maintenance and Servi ce Guide Produc t Descr iption 1 .2 Reset tin g t he C omp uter If the computer you are servicing has an unkno wn password, follo w these steps to clear the password. These steps also clear CMOS: 1. Enter an incorrect password and press enter . 2. Repeat Step 1 two times. After the third entry of the incorrect password, [...]

Pr oduct Desc ripti on Maintenance and Serv ice Guide 1–5 1. 3 P o w e r M a n a g e m e n t The computer comes with po wer management features that extend battery operating time and conserv e power . The computer supports the follo wing power management features: ■ Standby ■ Hibernation ■ Setting customization by the user ■ Hotke ys for [...]

1–6 Maintenance and Servi ce Guide Produc t Descr iption 1 .4 External C ompon ents The external components on the front of the computer are sho wn belo w and described in T able 1-1. F ront C omponents[...]

Pr oduct Desc ripti on Maintenance and Serv ice Guide 1–7 Ta b l e 1 - 1 Front Components Item Component Function 1P o w e r l i g h t ■ On: Computer is turned on. ■ Off: Computer is off or in hibernation. ■ Blinking: Computer is in standby . 2B a t t e r y l i g h t ■ On: A battery pack is charging or is close to full charge capacity . ?[...]

1–8 Maintenance and Servi ce Guide Produc t Descr iption The external components on the right side of the computer are sho wn below and described in T able 1-2. R ight-Si de Compone nts[...]

Pr oduct Desc ripti on Maintenance and Serv ice Guide 1–9 Ta b l e 1 - 2 Right-Side Components Item Component Function 1 ExpressCard slot Suppor ts an optional ExpressCard. 2A u d i o - o u t (headphone) jack Connects an optional headphone or powered stereo speak ers. Also connects the audio function of an audio/video de vice, such as a tele visi[...]

1–10 Maintenance and Servi ce Guide Produc t Descr iption The external components on the left side of the computer are sho wn below and described in T able 1-3. Lef t -Sid e Comp on en ts Ta b l e 1 - 3 Left-Side Components Item Component Function 1 P ower connector Connects the A C adapter cable. 2 Monitor por t Connects an optional V GA monitor[...]

Pr oduct Desc ripti on Maintenance and Serv ice Guide 1–11 5 Expansion por t 2 Connects t he computer to an optional docking de vice. ✎ The computer has only one expansion port. The term expansion port 2 describes the type of expansion port. 6 USB por ts (2) Connect optional USB de vices. 7 1394 por t (4-pin) Connects an optional 1394a device s[...]

1–12 Maintenance and Servi ce Guide Produc t Descr iption The external components on the rear panel of the computer are sho wn below and described in T able 1-4. Rea r P a n e l C om p o n en t s[...]

Pr oduct Desc ripti on Maintenance and Serv ice Guide 1–13 Ta b l e 1 - 4 Rear P anel Components Item Component Function 1 Security cable slot Attaches an op tional security cable to the computer . ✎ The purpose of security solutions is to act as a deterrent. These solutions do not prevent the product from being mishandled or stolen. 2 RJ-11 (m[...]

1–14 Maintenance and Servi ce Guide Produc t Descr iption The standard ke yboard components of the computer are shown belo w and described in T able 1-5. Standar d K ey board C omponents[...]

Pr oduct Desc ripti on Maintenance and Serv ice Guide 1–15 T able 1-5 Standard K eyboar d Components Item Component Function 1 f1 to f12 ke ys (12) P erform system and application tasks. When combined with fn , function ke ys perfo r m additional tasks as hotkeys . 2 caps lock ke y Enables caps loc k and tur ns on the caps lock light. 3 fn ke y C[...]

1–16 Maintenance and Servi ce Guide Produc t Descr iption The computer top components are sho wn below and described in T able 1-6. To p C o m p o n e n t s T able 1-6 T op Components Item Component Function 1 Displa y switch Initiates standb y if the displa y is closed when the computer is on. 2 Wireless light On: One or more internal wireless d[...]

Pr oduct Desc ripti on Maintenance and Serv ice Guide 1–17 3 Wireless button T urns the wireless functionality on or off, but does not create a wireless connection. ✎ To establish a wireless connection, a wireless network must already be set up. 4P o w e r l i g h t ■ On: The computer is on. ■ Blinking: The computer is in standby . ■ Off:[...]

1–18 Maintenance and Servi ce Guide Produc t Descr iption The Quick Play and Quick Launch buttons are sho wn below and described in T able 1-7. To p C o m p o n e n t s[...]

Pr oduct Desc ripti on Maintenance and Serv ice Guide 1–19 T able 1-7 QuickPla y and Quick Launch Button Components Item Component Function 1 D VD button Default b utton functions without QuickPlay software: When the computer is ■ On: Opens the defa ult D VD application to star t a D VD in the optical dr ive . ■ Off: No function. ■ In stand[...]

1–20 Maintenance and Servi ce Guide Produc t Descr iption 2 Media Button Def ault button functions without Quic kPlay software: When the computer is ■ On: Opens the music application or the Media menu, allowing y o u to select a multimedia application. ■ Off: No function. ■ In standby: Resumes from standb y into Windows . ■ In hibernation[...]

Pr oduct Desc ripti on Maintenance and Serv ice Guide 1–21 The computer T ouchPad components are sho wn below and described in T able 1-8. T ouchP ad Components T able 1-8 T ouchP ad Components Item Component Function 1 Left and right T ouchP ad buttons Function like the left and right b uttons on an e xter nal mouse. 2 T ouchP ad Mov es the poin[...]

1–2 2 Maintenance and Servi ce Guide Produc t Descr iption The external components on the bottom of the computer are sho wn below and described in T able 1-9. Bottom Components Ta b l e 1 - 9 Bottom Components Item Component Function 1 Optical drive Suppor ts an optical disc, such as a CD or D VD . 2 Labels area Contains the serial number and oth[...]

Pr oduct Desc ripti on Maintenance and Serv ice Guide 1–2 3 5 V ents (2) Provide airflow to cool internal components. Ä T o pre vent ov erheating, do not obstruct vents. Do not allow a hard surf ace, such as a printer , or a soft surf ace, such as pillows or thick rugs or clothing, to bloc k airflow . 6 Memory/Mini PCI module compar tment cov er[...]

1–2 4 Maintenance and Servi ce Guide Produc t Descr iption 1. 5 D e s i g n O v e r v i e w This section presents a design ov erview of k ey parts and features of the computer . Refer to Chapter 3, “Illustrated Parts Catalog, ” to identify replacement parts, and Chapter 5, “Remov al and Replacement Procedures, ” for disassembly steps. The[...]

Maintenance and Serv ice Guide 2–1 2 T r oubl eshooting Å W ARN IN G: Only au thori zed tec hnic ians tr ained by HP should r epair this equipment . All trouble shooting and repair pr ocedures ar e detailed to allo w only subas sembly-/module-level r epair . Because of the comple xity of the indi vi dual boards and suba ssemblies , do not attemp[...]

2–2 Maintenance and Servi ce Guide T roubleshooting Acce ssing Compute r Setup The information and settings in Computer Setup are accessed from the File, Security , T ools, and Advanced menus. 1. Open Computer Setup by turning on or restarting the computer . Press f10 while the F10 = Based Setup message is displayed in the lo wer-left corner of t[...]

T roubleshooting Maintenance and Serv ice Guide 2–3 4. T o confirm the restoration, press f10 . 5. Select File > Sa ve changes and exit , and then follo w the instructions on the screen. When the computer restarts, the factory settings are restored, and any identif ication information you hav e entered is sav ed. Selecting fro m the Fi le Menu[...]

2–4 Maintenance and Servi ce Guide T roubleshooting Selectin g from the Securit y Menu Ta b l e 2 - 2 Security Menu Select T o Do This Administrator pass word Enter , change , or delete an HP Administrator pass word. P ower-on pass word Enter , change, or delete a power-on pass word. P assw ord options ■ Enable/Disab le stringent secur ity . ?[...]

T roubleshooting Maintenance and Serv ice Guide 2–5 Selectin g from the T ools Menu Ta b l e 2 - 3 To o l s M e n u Select T o Do This HDD Self T est options Run a quic k or comprehensive self-test on any hard drive in the system. Battery Inf or mation View inf or matio n about any battery packs in the computer . Memor y Check ■ Run a self-test[...]

2–6 Maintenance and Servi ce Guide T roubleshooting Selec ting from the Adv anced Menu Ta b l e 2 - 4 Adv a nced Menu Select T o Do This Language (or press f2 ) Change the Computer Setup language . Boot options ■ Enable/Disab le MultiBoot, which sets a star tup sequence that can include most bootable de vices and media in the system. ■ Set th[...]

T roubleshooting Maintenance and Serv ice Guide 2–7 2.2 T roubleshooting Flo wc har ts Ta b l e 2 - 5 T roubleshooting Flo wcharts Over view Flowchart Description 2.1 “Flowchart 2.1—Initial T roubleshooting” 2.2 “Flowchart 2.2—No Po wer , P ar t 1” 2.3 “Flowchart 2.3—No Po wer , P ar t 2” 2.4 “Flowchart 2.4—No Po wer , P ar [...]

2–8 Maintenance and Servi ce Guide T roubleshooting Flowchart Description 2.14 “Flowchart 2.14—No OS Loading, Optical Dr ive” 2.15 “Flowchart 2.15—No Audio , Part 1” 2.16 “Flowchart 2.16—No Audio , Part 2” 2.17 “Flowchart 2.17—Nonfunctioning Device” 2.18 “Flowchart 2.18—Nonfunctioning Ke yboard” 2.19 “Flowchart 2.1[...]

T roubleshooting Maintenance and Serv ice Guide 2–9 Flo wc h ar t 2. 1—Initi al T roubleshootin g Connecting to network or modem? Begin troubleshooting. Is there power? Is the OS loading? Is there video? (no boot) Is there sound? Beeps, LEDs, or error messages? Keyboard/ pointing device work- ing? Go to “Flowchart 2.17—Nonfunc- tioning Devi[...]

2–10 Maintenance and Servi ce Guide T roubleshooting Flo wch ar t 2.2—No P ow er , P ar t 1 1. Reseat the power cables in the docking device and at the AC outlet. 2. Ensure the AC power source is active. 3. Ensure that the power strip is working. Done Remove from docking device (if applicable). Pow e r u p on batter y power? Po we r u p on AC p[...]

T roubleshooting Maintenance and Serv ice Guide 2–11 Flo wc har t 2.3—No P ow er , P ar t 2 Continued from “Flowchart 2.2—No P ower , Pa r t 1 . ” Visually check for debris in batter y socket and clean if necessary . Done N Y Po we r o n ? Check batter y by recharging it, moving it to another computer , or replacing it. Pow e r o n ? Done[...]

2–12 Maintenance and Servi ce Guide T roubleshooting Flo wch ar t 2.4—No P ow er , P ar t 3 Continued from “Flowchart 2.3—No P ower , Pa r t 2 . ” Reseat AC adapter in computer and at pow er so urce . Internal or external AC adapter? Done Done Done Done Po we r o n ? Pow e r o n ? Po we r o n ? Plug directly into AC outlet. Po we r L E D [...]

T roubleshooting Maintenance and Serv ice Guide 2–13 Flowc ha r t 2.5 —N o P o wer , P ar t 4 Y N Continued from “Flowchart 2.4—No P ower , Pa r t 3 . ” Reseat loose components and boards and replace damaged items. Open computer . Loose or damaged parts? Y Close computer and retest. Pow er on ? Done N Replace the following items (if appli[...]

2–14 Maintenance and Servi ce Guide T roubleshooting Flo wc h ar t 2.6—No Video, P ar t 1 A N Stand-alone or docking device? No video. Replace the following one at a time . T est after each replacement. 1. Cable between computer and co mputer display (if applicable) 2. Display 3. System board Internal or external display*? Adjust brightness. Vi[...]

T roubleshooting Maintenance and Serv ice Guide 2–15 Flo wc h ar t 2.7—No Video, P ar t 2 Y N Continued from “Flowchart 2.6—No Video , Pa r t 1 . ” Done Adjust external monitor display . Video OK? Adjust display brightness. Video OK? Video OK? Done Done Check that computer is properly seated in docking device, for bent pins on cable, and [...]

2–16 Maintenance and Servi ce Guide T roubleshooting F lo w cha rt 2 .8 —N on fun ctio ni ng Do cki ng D e v ic e (if applicable ) Y N Reseat power cord in docking device and power outlet. N Check voltage setting on docking device. Reset monitor cable connector at docking device. Reinstall computer into dock- ing device. Docking device operatin[...]

T roubleshooting Maintenance and Serv ice Guide 2–17 Flo wch ar t 2.9—No O peratin g S y s tem (OS) Loading No OS loading from hard drive, go to “Flowchart 2.10—No OS Loading, Hard Drive, P ar t 1. ” Reseat power cord in docking device and power outlet. No OS loading.* *NOTE: Before beginning troubleshooting, always check cable connection[...]

2–18 Maintenance and Servi ce Guide T roubleshooting Flo wc har t 2. 1 0—No OS Loa ding , H ard Driv e, Pa r t 1 Go to “Flowchart 2.17—Nonfunction- ing Device . ” Y Done N OS not loading from hard drive. Nonsystem disk message? Go to “Flowchart 2.11—No OS Load- ing, Hard Drive, Pa r t 2 . ” Reseat external hard drive. OS loading? Do[...]

T roubleshooting Maintenance and Serv ice Guide 2–19 Flowc h ar t 2. 1 1—N o O S L oa di ng , H ard Drive, Pa r t 2 Load OS using Oper- ating System disc (if applicable). Continued from “Flowchart 2.10—No OS Loading, Hard Drive, P ar t 1. ” Reseat hard drive. Done Disc or diskette in drive? 1. Replace hard drive. 2. Replace system board. [...]

2–20 Maintenance and Servi ce Guide T roubleshooting Flo wch ar t 2. 1 2—N o OS Loadin g, H ard Driv e, Pa r t 3 Y System files on hard drive? Continued from “Flowchart 2.11—No OS Load- ing, Hard Drive, Pa r t 2 . ” Clean virus. Done N Install OS and reboot. Virus on hard drive? OS loading from hard drive? Y N Y N Y N Diagnostics on disc [...]

T roubleshooting Maintenance and Serv ice Guide 2–21 Flo wc h ar t 2. 1 3—N o OS Loadin g , Disk et te Driv e Replace the following components individually , retesting after each replacement: ■ Diskette drive ■ System board Done Y N Reseat diskette drive. OS not loading from diskette drive. Done Y Y Y Y Y Y Y N N N N N N N OS loading? Nonsy[...]

2–2 2 Maintenance and Servi ce Guide T roubleshooting Flo wc har t 2. 1 4 —No OS Loadin g , Opti cal Driv e Y Done N Bootable disc in drive? Disc in drive? No OS loading from CD-ROM or DVD-ROM drive. Install bootable disc and reboot computer . Go to “Flowchart 2.17—Nonfunction- ing Device . ” Go to “Flowchart 2.17—Nonfunctioning Devic[...]

T roubleshooting Maintenance and Serv ice Guide 2–2 3 Flo wc har t 2. 1 5—No Audio, Part 1 No audio. N Computer in docking device (if applicable)? Internal audio? Audio? Done Undock Audio? Done T urn up audio internally or externally . Go to “Flowchart 2.16—No Audio , Pa r t 2 . ” Go to “Flowchar t 2.17—Nonfunctioning De vice. ” Rep[...]

2–2 4 Maintenance and Servi ce Guide T roubleshooting Flo wc har t 2. 1 6—N o Audio, P ar t 2 YN Continued from “Flowchart 2.15—No Audio , Pa r t 1 . ” Reload audio drivers. Audio driver in OS configured? Audio? Y Y Y N N N Correct drivers for application? Connect to external speaker . Load drivers and set configuration in OS. Audio? Done[...]

T roubleshooting Maintenance and Serv ice Guide 2–2 5 Flo wch ar t 2. 1 7—Nonfunc tionin g De vice Done Any physical device detected? Y N Unplug the nonfunctioning device from the computer and inspect cables and plugs for bent or broken pins or other damage. Reseat device. Clear CMOS. Done Fix o r replace broken item. Nonfunctioning device. Rea[...]

2–2 6 Maintenance and Servi ce Guide T roubleshooting Flo wc h ar t 2. 1 8—N onfunc tionin g K e yboard Y N Keyboard operating properly? Keyboard not operating prop- erly . External device works? Replace system board. Replace system board. Connect computer to good external key- board. Reseat internal key- board connector (if applicable). Replac[...]

T roubleshooting Maintenance and Serv ice Guide 2–2 7 Flo wc h ar t 2. 1 9—Nonfun ctionin g P oin ting De vice Y N Pointing device not operating properly . External device works? Replace system board. Replace system board. Connect computer to good external pointing device. Reseat internal pointing device connector (if applicable). Replace inter[...]

2–2 8 Maintenance and Servi ce Guide T roubleshooting Flo wc h art 2.20—N o Net wor k/Modem Conne ction Y Disconnect all power from the computer and open. No network or modem connec- tion. N Done Digital line? Network or modem jack active? Replace jack or have jack acti- vated. Connect to nondigital line. NIC/modem configured in OS? Reload driv[...]

Maintenance and Serv ice Guide 3–1 3 I llustra ted P arts C atal og This chapter provides an illustrated parts breakdo wn and a reference for spare part numbers. 3. 1 S erial N umber Location When ordering parts or requesting information, provide the computer serial number and model number located on the bottom of the computer . Seri al Nu mber L[...]

3–2 Maintenance and Servi ce Guide Illustrated P ar ts Catalo g 3.2 Comp uter M ajor Com ponents Comp ut er Ma jor Com po ne nt s[...]

Illustr ated P ar ts Catalog Maintenance and Serv ice Guide 3–3 Ta b l e 3 - 1 Spare P ar ts: Computer Major Components Item Description Spare P ar t Number 1 Display assemb lies (include display cab le, wireless antenna boards, and antenna cables) 17-inch, WSXGA+ with BrightView 17-inch, WXGA+ with BrightView 403797-001 403796-001 ✎ Refer to S[...]

3–4 Maintenance and Servi ce Guide Illustrated P ar ts Catalo g Comp ute r Major Componen ts[...]

Illustr ated P ar ts Catalog Maintenance and Serv ice Guide 3–5 Ta b l e 3 - 1 Spare P ar ts: Computer Major Components (Continued) Item Description Spare P ar t Number 6 T op co ver (includes T ouchP ad) 403822-001 7 Bracket Kit , includes: Displa y hinge suppor t brac ket Not illustrated: Optical drive brac ket (also included with optical drive[...]

3–6 Maintenance and Servi ce Guide Illustrated P ar ts Catalo g Comp ute r Major Componen ts[...]

Illustr ated P ar ts Catalog Maintenance and Serv ice Guide 3–7 Ta b l e 3 - 1 Spare P ar ts: Computer Major Components (Continued) Item Description Spare P ar t Number 15 Processor s (include ther mal paste) AMD T urion 64 ML-40 (2.2-GHz) AMD T urion 64 ML-37 (2.0-GHz) AMD T urion 64 ML-32 (1.8-GHz) AMD T urion 64 ML-30 (1.6-GHz) 393579-001 3935[...]

3–8 Maintenance and Servi ce Guide Illustrated P ar ts Catalo g Comp ute r Major Componen ts[...]

Illustr ated P ar ts Catalog Maintenance and Serv ice Guide 3–9 Ta b l e 3 - 1 Spare P ar ts: Computer Major Components (Continued) Item Description Spare P ar t Number 23 8-cell, 4.4-hour battery pack 403808-001 24 Mini PCI communications modules 802.11a/b/g wireless local access network (WLAN) module f or use in Nor th Amer ica 802.11a/b/g WLAN[...]

3–10 Maintenance and Servi ce Guide Illustrated P ar ts Catalo g 3. 3 Disp lay Assembly Subcom ponents[...]

Illustr ated P ar ts Catalog Maintenance and Serv ice Guide 3–11 T able 3-2 Display Assemb ly Subcomponent Spare P ar t Number Information Item Description 1a 1b Display Plastics Kit , includes: ■ Displa y bezel ■ Displa y enclosure ■ Displa y release latch actuator and hooks (not illustrated) 403881-001 2 Display Hinge Kit 403884-001 3 Dis[...]

3–12 Maintenance and Servi ce Guide Illustrated P ar ts Catalo g 3.4 P l a stic s Kit T able 3-3 Plastics Kit Spare P ar t Number Information Item Description Spare P ar t Number Plastics Kit , includes: 403812-001 1 Memor y/Mini PCI module compar tment cov er (includes 2 captive screws , secured by C-clips) 2 Hard dr ive co ver (includes 3 capt [...]

Illustr ated P ar ts Catalog Maintenance and Serv ice Guide 3–13 3.5 Cab le Kit Ta b l e 3 - 4 Cable Kit Spare P ar t Number Information Item Description Spare P ar t Number Cable Kit , includes: 403814-001 1 T ouchP ad cable 2 Modem connector cable 3 Bluetooth module cable 4 USB board cable 5 P ower connector cab le[...]

3–14 Maintenance and Servi ce Guide Illustrated P ar ts Catalo g 3.6 M a s s S t ora g e D evices[...]

Illustr ated P ar ts Catalog Maintenance and Serv ice Guide 3–15 Ta b l e 3 - 5 Mass Storage Devices Spare P ar t Number Information Item Description Spare P ar t Number 1 Hard drives (include frame and connector) 7200 r pm, 100-GB 5400 r pm, 80-GB 405938-001 403803-001 4200-r pm, 120-GB 4200-r pm, 100-GB 4200-r pm, 60-GB 405939-001 403804-001 40[...]

3–16 Maintenance and Servi ce Guide Illustrated P ar ts Catalo g 3.7 Miscell aneous (N ot I llustra ted) Ta b l e 3 - 6 Miscellaneous (Not Illustrated) Spare P ar t Information Description Spare P ar t Number All-in-one media cable 375759-001 A udio Y-cable 2 379452-001 P ower supply , 65 watt 403810-001 Pow e r c o r d s Fo r u s e i n : Canada,[...]

Illustr ated P ar ts Catalog Maintenance and Serv ice Guide 3–17 3.8 Sequen tial P a rt N umber Listin g Ta b l e 3 - 7 Sequential P ar t Number Listing Spare P ar t Number Description 309674-001 USB tra vel mouse 364727-001 USB digital drive 371693-001 Wired headset with volume control 371694-001 HP remote control 375759-001 All-in-one media cab[...]

3–18 Maintenance and Servi ce Guide Illustrated P ar ts Catalo g 403792-001 802.11a/b/g WLAN Mini PC I communications module f or use in the rest of the world 403796-001 17-inch, WXGA+ with Brig htView displa y assembly (includes displa y cable, wireless antenna boards , and antenna cables) 403797-001 17-inch, WSXGA+ with Brig htView displa y ass[...]

Illustr ated P ar ts Catalog Maintenance and Serv ice Guide 3–19 403810-001 P ower supply , 65 watt 403811-001 P ower cord f or use in the United States 403811-021 P ower cord f or use Inter nationally 403811-031 P ower cord f or us e in the United Kingdom 403811-061 P ower cord f or use in Italy 403812-001 Plastics Kit 403813-001 Screw Kit 40381[...]

3–20 Maintenance and Servi ce Guide Illustrated P ar ts Catalo g 403835-001 PC Card assembly 403881-001 Displa y Plastics Kit 403882-001 Wireless Antenna Kit 403884-001 Displa y Hinge Kit 403885-001 Displa y Panel Kit 403886-001 Displa y Screw Kit 403887-001 Displa y Label Kit 405937-001 4200-rpm, 60-GB hard dr ive (includes frame and connector) [...]

Maintenance and Serv ice Guide 4–1 4 Remo v al an d Repl a cement Preliminaries This chapter provides essential information for proper and safe remov al and replacement service. 4. 1 T oo ls Required Y ou will need the following tools to complete the remov al and replacement procedures: ■ Magnetic scre wdriv er ■ Phillips P0 scre wdriv er ■[...]

4–2 Maintenance and Servi ce Guide Remo val and Replacemen t Preliminar ies 4.2 Ser vice Consi dera tions The follo wing sections include some of the considerations that you should keep in mind during disassembly and assembly procedures. ✎ As you remov e each subassembly from the computer , place the subassembly (and all accompanying scre ws) a[...]

Remo val and Replacement Pr eliminaries Maintenance and Serv ice Guide 4–3 4. 3 Pr e v enti ng Damage t o Re mo v able Dri v es Remov able drives are fragile components that must be handled with care. T o prevent damage to the computer , damage to a remov able drive, or loss of information, observ e the follo wing precautions: ■ Before removing[...]

4–4 Maintenance and Servi ce Guide Remo val and Replacemen t Preliminar ies 4.4 Pre v entin g Elec trosta tic Dam a ge Many electronic components are sensiti ve to electrostatic discharge (ESD). Circuitry design and structure determine the degree of sensiti vity . Networks built into many integrated circuits provide some protection, b ut in many [...]

Remo val and Replacement Pr eliminaries Maintenance and Serv ice Guide 4–5 4.5 P ac k a gin g and T rans portin g Precautions Use the follo wing grounding precautions when packaging and transporting equipment: ■ T o av oid hand contact, transport products in static-safe containers, such as tubes, bags, or boxes. ■ Protect all electrostatic-se[...]

4–6 Maintenance and Servi ce Guide Remo val and Replacemen t Preliminar ies 4.6 W orks tation Precau tions Use the follo wing grounding precautions at workstations: ■ Cov er the workstation with approv ed static-shielding material (refer to T able 4-2, “Static-Shielding Materials” ). ■ Use a wrist strap connected to a properly grounded wo[...]

Remo val and Replacement Pr eliminaries Maintenance and Serv ice Guide 4–7 ■ When standing, use foot straps and a grounded floor mat. Foot straps (heel, toe, or boot straps) can be used at standing workstations and are compatible with most types of shoes or boots. On conducti ve floors or dissipati ve floor mats, use foot straps on both feet wi[...]

4–8 Maintenance and Servi ce Guide Remo val and Replacemen t Preliminar ies T able 4-1 shows ho w humidity affects the electrostatic v oltage le vels generated by dif ferent activities. T able 4-2 lists the shielding protection provided by antistatic bags and floor mats. Ta b l e 4 - 1 T ypical Electrostatic V oltage Levels Relative Humidity Even[...]

Maintenance and Serv ice Guide 5–1 5 Remo v al an d Repl a cement Procedur es This chapter provides remo val and replacement procedures. There are as many 113 scre ws, in 9 different sizes and types, that may hav e to be remov ed, replaced, or loosened when servicing the computer . Make special note of each scre w size and location during remov a[...]

5–2 Maintenance and Servi ce Guide Remo val and Replacemen t Procedur es 5 . 1 Serial N umber Report the computer serial number to HP when requesting information or ordering spare parts. The serial number is located on the bottom of the computer . Seri al Nu mber Location[...]

Remo val and Replacement Pr ocedures Maintenance and Serv ice Guide 5–3 5 .2 Disassembl y Sequenc e Chart Use the chart belo w to determine the section number to be referenced when removing computer components. Disassembl y Sequence Char t Section Description # of Screws Remo ved 6.3 Preparing the Computer for Disassembly Batter y pack 0 6.4 Hard[...]

5–4 Maintenance and Servi ce Guide Remo val and Replacemen t Procedur es Section Description # of Screws Remo ved 6.11 K eyboard Assemb ly F rame 2 6.12 LED Board 4 6.13 Key b o a r d 5 6.14 Displa y Assembly 6 to remov e the displa y assembly 6 to remov e the displa y bezel 4 to remov e the displa y panel 4 to remov e each displa y hinge 1 to re[...]

Remo val and Replacement Pr ocedures Maintenance and Serv ice Guide 5–5 5 .3 Preparing th e Co mpu ter for Disasse mbl y Before you begin an y remov al or installation procedures: 1. Shut do wn the computer . If you are unsure whether the computer is of f or in hibernation, turn the computer on, and then shut it do wn through the operating system[...]

5–6 Maintenance and Servi ce Guide Remo val and Replacemen t Procedur es 4. Remov e the battery pack by follo wing these steps: a. T urn the computer upside down with the front to ward you. b . Slide the battery pack release latch 1 to the left. (The battery pack disengages from the computer .) c. Lift the front edge of the battery pack 3 up and [...]

Remo val and Replacement Pr ocedures Maintenance and Serv ice Guide 5–7 5 .4 H ard Driv e 1. Prepare the computer for disassembly (refer to Section 5.3 ). Hard Drive Spare P ar t Number Information 7200 r pm, 100-GB 405938-001 5400 r pm, 80-GB 403803-001 4200-rpm, 120-GB 405939-001 4200-rpm, 100-GB 403804-001 4200-rpm, 60-GB 405937-001 ✎ All ha[...]

5–8 Maintenance and Servi ce Guide Remo val and Replacemen t Procedur es 2. Loosen the three black Phillips PM2.5×6.0 scre ws 1 that secure the hard dri ve cov er to the computer . 3. Lift the rear edge of the hard dri ve cov er 2 and swing it up and forward and remo ve it. ✎ The hard dri ve cov er is included in the Plastics Kit, spare part n[...]

Remo val and Replacement Pr ocedures Maintenance and Serv ice Guide 5–9 4. Remov e the two silver Phillips PM2.5×6.0 hard dri ve retention scre ws 1 that secure each hard driv e to the computer . 5. Slide the hard dri ve 2 a way from the hard driv e connector . 6. Remov e the hard driv e from the hard dri ve bay 3 . Re mov ing the Hard Dr iv e[...]

5–10 Maintenance and Servi ce Guide Remo val and Replacemen t Procedur es 7. Remov e the four Phillips PM3.0×4.0 hard driv e frame scre ws 1 that secure the hard driv e frame to the hard driv e. 8. Lift the hard dri ve straight up 2 to remov e if from the hard dri ve frame. Re mov ing the Hard Dr iv e Fr ame Re verse the abov e procedure to reas[...]

Remo val and Replacement Pr ocedures Maintenance and Serv ice Guide 5–11 5. 5 C o m p u t e r Fe e t The computer feet are adhesi ve-backed rubber pads. The feet are included in the Plastics Kit, spare part number 403812-001. Rep l a ci n g t h e Co m p ut e r Fe et[...]

5–12 Maintenance and Servi ce Guide Remo val and Replacemen t Procedur es 5. 6 M e m o r y M o d u l e 1. Prepare the computer for disassembly (refer to Section 5.3 ). 2. Position the computer with the rear panel to ward you. Memory Module Spare Part Number Information 1024 MB 403800-001 512 MB 403799-001 256 MB 403573-001[...]

Remo val and Replacement Pr ocedures Maintenance and Serv ice Guide 5–13 3. Loosen the two black Phillips PM2.5×6.0 scre ws 1 that secure the memory/Mini PCI module compartment cov er to the computer . 4. Lift the right side of the cov er 2 and swing it up and to the left and remov e it. ✎ The memory/Mini PCI module compartment cov er is inclu[...]

5–14 Maintenance and Servi ce Guide Remo val and Replacemen t Procedur es 5. Loosen the two Phillips PM2.5×4.0 scre ws 1 that secure the memory shield to the computer . 6. Lift the right side of the memory shield 2 and swing it to the left as far as it will go. Relea sing the Memory Shield[...]

Remo val and Replacement Pr ocedures Maintenance and Serv ice Guide 5–15 7. Spread the retaining tabs 1 on each side of the memory module socket to release the memory module. (The edge of the module opposite the socket rises a way from the computer .) 8. Slide the module aw ay from the socket at an angle 2 . 9. Remov e the memory module. ✎ Memo[...]

5–16 Maintenance and Servi ce Guide Remo val and Replacemen t Procedur es 5 .7 Mini PCI Communi ca tions Module 1. Prepare the computer for disassembly ( Section 5.3 ). 2. Remov e the memory/Mini PCI module compartment cov er ( Section 5.6 ). Mini PCI Communications Module Spare P ar t Number Information 802.11a/b/g wireless local acce ss network[...]

Remo val and Replacement Pr ocedures Maintenance and Serv ice Guide 5–17 ✎ Before disconnecting the antenna cables, make note of which cable is attached to which antenna clip on the Mini PCI communications module. 3. Disconnect the auxiliary and main antenna cables 1 from the Mini PCI communications module. 4. Spread the two retaining tabs 2 on[...]

5–18 Maintenance and Servi ce Guide Remo val and Replacemen t Procedur es 5. 8 R TC B a t t e r y 1. Prepare the computer for disassembly ( Section 5.3 ). 2. Remov e the memory/Mini PCI module compartment cov er ( Section 5.6 ). 3. Remov e the Mini PCI communications module ( Section 5.7 ). RTC Battery Spare P ar t Number Information R TC batter [...]

Remo val and Replacement Pr ocedures Maintenance and Serv ice Guide 5–19 4. Remov e the R TC battery from the socket on the system board. Re mov ing the RT C Battery Re verse the abov e procedure to install an R TC battery .[...]

5–20 Maintenance and Servi ce Guide Remo val and Replacemen t Procedur es 5 .9 O ptical Driv e 1. Prepare the computer for disassembly ( Section 5.3 ). 2. Position the computer with the left side to ward you. Optical Drive Spare P ar t Number Information D VD±R W and CD-RW Doub le Lay er Combo Drive with LightScribe 403807-001 D VD±R W and CD-R[...]

Remo val and Replacement Pr ocedures Maintenance and Serv ice Guide 5–21 3. Remov e the Phillips PM2.5×13.0 screw 1 that secures the optical dri ve to the computer . 4. Insert a thin tool, such as an unbent paper clip 2 , into the media tray release hole and release the media tray . 5. Use the media tray to slide the optical dri ve out of the co[...]

5–2 2 Maintenance and Servi ce Guide Remo val and Replacemen t Procedur es 5. 1 0 Sw i t c h C ove r 1. Prepare the computer for disassembly ( Section 5.3 ). 2. Remov e the two Phillips PM2.5×13.0 scre ws 1 and the three Phillips PM2.5×4.0 scre ws 2 that secure the switch cover to the computer . Re mov i ng the S w itch C ov er Sc re ws Switch [...]

Remo val and Replacement Pr ocedures Maintenance and Serv ice Guide 5–2 3 3. T urn the computer display-side up with the front toward you. 4. Open the computer as far as possible. 5. Insert a flat-bladed scre wdriv er under the display hinge cover sections 1 of the switch cov er . 6. Lift the switch cov er until the left and right sides 2 of the [...]

5–2 4 Maintenance and Servi ce Guide Remo val and Replacemen t Procedur es 5. 1 1 Ke yb o a r d A s s e m b l y F r a m e 1. Prepare the computer for disassembly ( Section 5.3 ). 2. Remov e the memory/Mini PCI module compartment cov er ( Section 5.6 ). 3. Remov e the switch cov er ( Section 5.10 ). 4. T urn the computer upside down with the front[...]

Remo val and Replacement Pr ocedures Maintenance and Serv ice Guide 5–2 5 7. T urn the computer display-side up with the front toward you. 8. Open the computer as far as possible. 9. Lift and hold the rear edge of the ke yboard until the LED board cable connector is accessible. Re leasing the K eyboar d Assembl y F rame[...]

5–2 6 Maintenance and Servi ce Guide Remo val and Replacemen t Procedur es 10. Release the zero insertion force (ZIF) connector 1 to which the LED board cable is connected and disconnect the cable 2 . Re leasing the K eyboar d Assembl y F rame[...]

Remo val and Replacement Pr ocedures Maintenance and Serv ice Guide 5–2 7 11. Swing the ke yboard assembly frame 1 forward until the assembly rests on the palm rest. 12. Release the ZIF connector to which the ke yboard cable 2 is attached and disconnect the ke yboard cable 3 . 13. Remov e the keyboard assembly frame. Re mov ing the K ey board Ass[...]

5–2 8 Maintenance and Servi ce Guide Remo val and Replacemen t Procedur es 5 . 1 2 LED B oard 1. Prepare the computer for disassembly ( Section 5.3 ) and then remov e the following components: a. Memory/Mini PCI module compartment cov er ( Section 5.6 ) b . Switch cov er ( Section 5.10 ) c. K eyboard assembly frame ( Section 5.11 ) 2. T urn the k[...]

Remo val and Replacement Pr ocedures Maintenance and Serv ice Guide 5–2 9 3. Remov e the four Phillips PM2.5×4.0 screws 1 that secure the LED board to the ke yboard frame. 4. Remov e the LED board 2 . Re mov ing the LED Board Re verse the abov e procedure to install the LED board.[...]

5–30 Maintenance and Servi ce Guide Remo val and Replacemen t Procedur es 5. 1 3 Ke y b o a r d 1. Prepare the computer for disassembly ( Section 5.3 ) and then remov e the following components: a. Memory/Mini PCI module compartment cov er ( Section 5.6 ) b . Switch cov er ( Section 5.10 ) c. K eyboard assembly frame ( Section 5.11 ) 2. T urn the[...]

Remo val and Replacement Pr ocedures Maintenance and Serv ice Guide 5–31 3. Remov e the fi ve Phillips PM2.5×4.0 screws 1 that secure the ke yboard to the keyboard frame. 4. Remov e the keyboard 2 . Remo ving the K ey board Re verse the abov e procedure to install the ke yboard.[...]

5–3 2 Maintenance and Servi ce Guide Remo val and Replacemen t Procedur es 5 . 1 4 Displa y Asse mbl y 1. Prepare the computer for disassembly ( Section 5.3 ). 2. Remov e the memory/Mini PCI module compartment cov er ( Section 5.6 ). ✎ Before disconnecting the antenna cables, make note of which cable is attached to which antenna clip on the Min[...]

Remo val and Replacement Pr ocedures Maintenance and Serv ice Guide 5–3 3 4. Remov e the switch cov er ( Section 5.10 ). 5. Remov e the keyboard assembly frame ( Section 5.11 ). 6. Disconnect the display cable 1 from the system board. 7. Remov e the wireless antenna cables from the clips 2 in the top cov er . Disconnecting the Displa y and Wir el[...]

5–34 Maintenance and Servi ce Guide Remo val and Replacemen t Procedur es Ä CAUT ION: Support the display a ssembl y when r emov ing the follo wing scr ew s. F ailure t o support the display asse mbly can r esult in damage to the display a ssembly and othe r computer components . 8. Remov e the the silver Phillips PM2.5×6.0 scre w 1 and the fi [...]

Remo val and Replacement Pr ocedures Maintenance and Serv ice Guide 5–3 5 Display Assemb ly Subcomponents Spare P ar t Number Information Displa y Plastics Kit, includes: ■ Displa y bezel ■ Displa y enclosure ■ Displa y release latch actuator and hooks (not illustrated) 403881-001 Displa y Screw Kit, includes: ■ Phillips PM2.5×7.0 screws[...]

5–3 6 Maintenance and Servi ce Guide Remo val and Replacemen t Procedur es 10. Remov e the six rubber screw co vers 1 and 2 and the six Phillips PM2.5×7.0 scre ws 3 that secure the display bezel to the display assembly . ✎ The four rubber scre w covers 1 on the top edge of the display bezel are larger than the tw o rubber screw co vers 2 on th[...]

Remo val and Replacement Pr ocedures Maintenance and Serv ice Guide 5–3 7 11. Flex the inside edges of the left and right sides 1 and the top and bottom sides 2 of the display bezel until the bezel disengages from the display assembly . 12. Remov e the display bezel 3 . Remo ving the Displa y Bez el[...]

5–38 Maintenance and Servi ce Guide Remo val and Replacemen t Procedur es 13. Disconnect the follo wing cables: 1 Display panel cable 2 Light sensor cable 3 Display in verter cable Disconnecting the Displa y P anel Cables[...]

Remo val and Replacement Pr ocedures Maintenance and Serv ice Guide 5–3 9 14. Remov e the two Phillips PM2.5×4.0 scre ws 1 and the two Phillips PM2.5×7.0 scre ws 2 that secure the display panel to the display enclosure. 15. Remov e the display panel 3 . Remo ving the Displa y P anel Display Assemb ly Subcomponents Spare P ar t Number Informatio[...]

5–40 Maintenance and Servi ce Guide Remo val and Replacemen t Procedur es 16. Remov e the four Phillips PM2.0×4.0 screws 1 that secure each display hinge to the display panel. 17. Remov e the display hinges 2 . Remo ving the Displa y Hinges Display Assemb ly Subcomponents Spare P ar t Number Information Displa y Hinge Kit 403884-001[...]

Remo val and Replacement Pr ocedures Maintenance and Serv ice Guide 5–41 18. Remov e the Phillips PM2.0×4.0 screw 1 that secures the display in verter board to the display enclosure. 19. Swing the top edge of the board 2 up and forward and re move i t. Remo ving the Displa y Inv erter Board Display Assemb ly Subcomponents Spare P ar t Number Inf[...]

5–4 2 Maintenance and Servi ce Guide Remo val and Replacemen t Procedur es 20. Release the retention tabs 1 b uilt in to the display enclosure lining that secure the wireless antenna cables to the display enclosure. 21. Detach the wireless antenna transcei vers 2 from the display enclosure. 22. Remov e the wireless antenna transceiv ers and cable[...]

Remo val and Replacement Pr ocedures Maintenance and Servi ce Guide 5 –4 3 5. 1 5 Top C ove r 1. Prepare the computer for disassembly ( Section 5.3 ) and then remov e the following components: a. Hard dri ve ( Section 5.4 ) b . Memory/Mini PCI module compartment cov er ( Section 5.6 ) c. Optical dri ve ( Section 5.9 ) d. Switch cov er ( Section 5[...]

5–44 Maintenance and Servi ce Guide Remo val and Replacemen t Procedur es 2. Release the ZIF connector to which the T ouchPad cable 1 is connected and disconnect the T ouchPad cable 2 from the system board. ✎ The T ouchPad cable is included in the Cable Kit, spare part number 403814-001. Disconnecting the T ouc hP ad Cable 3. T urn the computer[...]

Remo val and Replacement Pr ocedures Maintenance and Serv ice Guide 5–4 5 4. Remov e the two Phillips PM2.5×4.0 scre ws 1 and three silver Phillips PM2.5×6.0 scre ws 2 that secure the top cov er to the computer . Re mov ing the T op Co ver S cr ew s, P art 1[...]

5–46 Maintenance and Servi ce Guide Remo val and Replacemen t Procedur es 5. Remov e the fi ve Phillips PM2.5×13.0 screws that secure the top cov er to the computer . Re mov ing the T op Co ver S cr ew s, P art 2[...]

Remo val and Replacement Pr ocedures Maintenance and Serv ice Guide 5–4 7 6. T urn the computer right-side up with the front toward you. 7. Remov e the nine silver Phillips PM2.5×6.0 scre ws that secure the top cov er to the computer . Re mov ing the T op Co ver S cr ew s, P art 3[...]

5–48 Maintenance and Servi ce Guide Remo val and Replacemen t Procedur es 8. Remov e the six Phillips PM2.5× 13.0 screws that secure the top cov er to the computer . Re mov ing the T op Co ver S cr ew s, P art 4[...]

Remo val and Replacement Pr ocedures Maintenance and Serv ice Guide 5–4 9 9. Lift up the rear edge of the top cov er 1 until it disengages from the base enclosure. 10. Lift the top cov er 2 straight up and remov e it. Re mov ing the T op Co ver Re verse the abov e procedure to install the top cov er .[...]

5–50 Maintenance and Servi ce Guide Remo val and Replacemen t Procedur es 5. 1 6 Sys t e m B o a r d ✎ When replacing the system board, ensure that the follo wing components are remov ed from the defectiv e system board and installed on the replacement system board: ■ Memory modules ( Section 5.6 ) ■ Mini PCI communications module ( Section[...]

Remo val and Replacement Pr ocedures Maintenance and Serv ice Guide 5–51 2. Press in on the ExpressCard slot bezel 1 to release it. 3. Remov e the ExpressCard slot bezel 2 . Remo ving the Expr essCar d Slot Bez el[...]

5–5 2 Maintenance and Servi ce Guide Remo val and Replacemen t Procedur es 4. Remov e the two silver Phillips PM2.5×6.0 scre ws 1 that secure the display hinge support bracket to the computer . 5. Remov e the display hinge support bracket 2 . Remo ving the Displa y Hinge Support Brac k et[...]

Remo val and Replacement Pr ocedures Maintenance and Serv ice Guide 5–5 3 6. Remov e the following scre ws: 1 One Phillips PM2.5×9.0 scre w that secures the system board to the base enclosure 2 Four silv er Phillips PM2.5×6.0 screws that secure the system board to the base enclosure 3 One Phillips PM2.5×4.0 scre w that secures the connector bo[...]

5–54 Maintenance and Servi ce Guide Remo val and Replacemen t Procedur es 8. Disconnect the follo wing cables from the system board: 1 Modem cable 2 Bluetooth module cable 3 USB board cable Disconnecting the Modem , Bluetooth Module , and USB B o a rd Cab l es[...]

Remo val and Replacement Pr ocedures Maintenance and Servi ce Guide 5–5 5 9. Lift the right side of the system board 1 until the right side of the board is clear of the base enclosure. 10. Make sure the PC Card eject b utton 2 is depressed and clears the base enclosure. 11. Slide the system board 3 to the right at an angle and re move i t. Re mov[...]

5–5 6 Maintenance and Servi ce Guide Remo val and Replacemen t Procedur es 12. Remov e the optical driv e connector board from the system board. ✎ The optical dri ve connector board is av ailable using spare part number 403829-001. Remo ving the Optical Dr iv e Connector Boar d Re verse the abov e procedures to install the system board.[...]

Remo val and Replacement Pr ocedures Maintenance and Serv ice Guide 5–5 7 5 . 1 7 Bluetooth Modul e 1. Prepare the computer for disassembly ( Section 5.3 ), and then remov e the following components: a. Hard dri ve ( Section 5.4 ) b . Memory/Mini PCI module compartment cov er ( Section 5.6 ) c. Optical dri ve ( Section 5.9 ) d. Switch cov er ( Se[...]

5–5 8 Maintenance and Servi ce Guide Remo val and Replacemen t Procedur es 2. Remov e the two Phillips PM2.0×4.0 scre ws 1 that secure the Bluetooth module to the base enclosure 3. Remov e the Bluetooth module from the base enclosure 2 . 4. Disconnect the Bluetooth module cable 3 from the Bluetooth module. Remo ving the Bluetooth Module[...]

Remo val and Replacement Pr ocedures Maintenance and Serv ice Guide 5–5 9 5. Slide and hold the battery release latch acuator 1 to the right. 6. Slide the Bluetooth module cable 2 through the hole in the battery release latch actuator 3 and the clips in the base enclosure. 7. Remov e the Bluetooth module cable 4 from the clip in the base enclosur[...]

5–60 Maintenance and Servi ce Guide Remo val and Replacemen t Procedur es 5 . 1 8 Mode m Con nector Cable ✎ The modem connector cable is included in the Cable Kit, spare part number 403814-001. 1. Prepare the computer for disassembly ( Section 5.3 ), and then remov e the following components: a. Hard dri ve ( Section 5.4 ) b . Memory/Mini PCI m[...]

Remo val and Replacement Pr ocedures Maintenance and Serv ice Guide 5–61 2. Remov e the modem connector 1 from the clip 2 in the base enclosure. 3. Remov e the modem connector cable from the routing channel 3 in the base enclosure. Remo ving the Modem C onnector Cable Re verse the abov e procedure to install the modem connector cable.[...]

5–6 2 Maintenance and Servi ce Guide Remo val and Replacemen t Procedur es 5. 1 9 U S B B o a r d 1. Prepare the computer for disassembly ( Section 5.3 ), and then remov e the following components: a. Hard dri ve ( Section 5.4 ) b . Memory/Mini PCI module compartment cov er ( Section 5.6 ) c. Optical dri ve ( Section 5.9 ) d. Switch cov er ( Sect[...]

Remo val and Replacement Pr ocedures Maintenance and Serv ice Guide 5–6 3 2. Remov e the USB cable from the routing clips 1 in the base enclosure. 3. Remov e the USB board 2 from the base enclosure. 4. Disconnect the USB board cable 3 from the USB board. ✎ The USB board cable is included with the USB board and is also av ailable in the Cable Ki[...]

5–64 Maintenance and Servi ce Guide Remo val and Replacemen t Procedur es 5. 2 0 S p e a ke r s 1. Prepare the computer for disassembly ( Section 5.3 ), and then remov e the following components: a. Hard dri ve ( Section 5.4 ) b . Memory/Mini PCI module compartment cov er ( Section 5.6 ) c. Optical dri ve ( Section 5.9 ) d. Switch cov er ( Sectio[...]

Remo val and Replacement Pr ocedures Maintenance and Servi ce Guide 5–6 5 2. Disconnect the speaker cable from the system board. Disconnecting the S peaker C able 3. T urn the system board upside down with the front to ward you.[...]

5–66 Maintenance and Servi ce Guide Remo val and Replacemen t Procedur es 4. Remov e the two silver Phillips PM2.5×6.0 scre ws 1 that secure the speaker to the system board. 5. Slide the speaker 2 forward until it clears the system board. Re mov ing the Speak er Re verse the abov e procedure to install the speaker .[...]

Remo val and Replacement Pr ocedures Maintenance and Serv ice Guide 5–6 7 5 .2 1 Hea t Sink 1. Prepare the computer for disassembly ( Section 5.3 ), and then remov e the following components: a. Hard dri ve ( Section 5.4 ) b . Memory/Mini PCI module compartment cov er ( Section 5.6 ) c. Optical dri ve ( Section 5.9 ) d. Switch cov er ( Section 5.[...]

5–6 8 Maintenance and Servi ce Guide Remo val and Replacemen t Procedur es 2. T urn the system board upside down with the e xpansion port 2 to ward you. 3. Remov e the four silver Phillips PM2.5×6.0 scre ws 1 that secure the heat sink to the system board. 4. Remov e the heat sink 2 . ✎ Due to the adhesi ve quality of the thermal paste located [...]

Remo val and Replacement Pr ocedures Maintenance and Servi ce Guide 5–6 9 ✎ The thermal paste should be thoroughly cleaned from the surfaces of the heat sink 1 and processor 2 each time the heat sink is remov ed. Thermal paste should be reapplied to both surfaces before the heat sink is reinstalled. Thermal paste is included with all heat sink [...]

5–7 0 Maintenance and Servi ce Guide Remo val and Replacemen t Procedur es 5. 22 P r o c e s s o r 1. Prepare the computer for disassembly ( Section 5.3 ), and then remov e the following components: a. Hard dri ve ( Section 5.4 ) b . Memory/Mini PCI module compartment cov er ( Section 5.6 ) c. Optical dri ve ( Section 5.9 ) d. Switch cov er ( Sec[...]

Remo val and Replacement Pr ocedures Maintenance and Serv ice Guide 5–71 2. Slide the tip of the processor socket release arm 1 forw ard until it clears the notch 2 on the processor socket. 3. Swing the processor socket release arm forward 3 as fa r as it will go. 4. Lift the processor straight up and remov e it 4 . ✎ The gold triangle 5 on the[...]

5–7 2 Maintenance and Servi ce Guide Remo val and Replacemen t Procedur es 5. 23 Fa n A s s e m b ly 1. Prepare the computer for disassembly ( Section 5.3 ), and then remov e the following components: a. Hard dri ve ( Section 5.4 ) b . Memory/Mini PCI module compartment cov er ( Section 5.6 ) c. Optical dri ve ( Section 5.9 ) d. Switch cov er ( S[...]

Remo val and Replacement Pr ocedures Maintenance and Serv ice Guide 5–7 3 2. Disconnect the fan cable 1 and the po wer connector cable 2 from the system board. 3. Remov e the following scre ws: 3 One Phillips PM2.5×4.0 scre w that secures the expansion port bracket and fa n assembly to the system board 4 T wo slotted M1.5×9.0 screws on each sid[...]

5–7 4 Maintenance and Servi ce Guide Remo val and Replacemen t Procedur es 4. Slide the expansion port 2 bracke t 1 away from the system board. 5. Remov e the fan assembly 2 . Re mov ing the F an Assembl y[...]

Remo val and Replacement Pr ocedures Maintenance and Serv ice Guide 5–7 5 ✎ If necessary , perform the follo wing steps to remov e the power connector cable from the fan assembly . ✎ The po wer connector cable is included in the Cable Kit, spare part number 403814-001. 6. T urn the fan assembly upside down with the po wer connector to ward yo[...]

5–7 6 Maintenance and Servi ce Guide Remo val and Replacemen t Procedur es 5. 24 P C C a r d A s s e m b l y 1. Prepare the computer for disassembly ( Section 5.3 ), and then remov e the following components: a. Hard dri ve ( Section 5.4 ) b . Memory/Mini PCI module compartment cov er ( Section 5.6 ) c. Optical dri ve ( Section 5.9 ) d. Switch co[...]

Remo val and Replacement Pr ocedures Maintenance and Serv ice Guide 5–77 2. T urn the system board upside down with the audio jacks, USB ports, and external monitor port to ward you. 3. Remov e the two Phillips PM2.0×4.0 scre ws that secure the PC Card assembly to the system board. Re mov ing the PC C ard As sembl y Scr ews[...]

5–7 8 Maintenance and Servi ce Guide Remo val and Replacemen t Procedur es 4. T urn the system board top-side up with the audio jacks, USB ports, and external monitor port to ward you. 5. Disengage the hooks 1 on the PC Card assembly from the slots on the PC Card connector 2 and remov e the PC Card assembly from the system board. Re mov ing the P[...]

Maintenance and Serv ice Guide 6–1 6 Spec ifica tions This chapter provides physical and performance specif ications. Ta b l e 6 - 1 Computer Dimensions Metric U .S. Height F ront Rear Width Depth 3.76 cm 4.62 cm 39.68 cm 28.19 cm 1.48 in 1.82 in 15.62 in 11.10 in W eight With 17.0-inch displa y , optical drive and 8-cell battery pack 3.62 kg 7.9[...]

6–2 Maintenance and Servi ce Guide Spe cificat ions Relative humidity (noncondensing) Operating Nonoperating 10% to 90% 5% to 95% 10% to 90% 5% to 95% Maximum altitude (unpressurized) Operating (14.7 to 10.1 psia) Nonoperating (14.7 to 4.4 psia) -15 m to 3,048 m -15 m to 12,192 m -50 ft to 10,000 ft -50 ft to 40,000 ft Shock Operating Nonoperatin[...]

Specific at ions Maintenance and Serv ice Guide 6–3 Ta b l e 6 - 2 17.0-inch, WSXGA+, BrightVie w Display Dimensions Height Width Diagonal 23.00 cm 36.80 cm 43.40 cm 9.06 in 14.49 in 17.09 in Number of colors Up to 16.8 million Contrast ratio 200:1 Brightness 180 nits typical Pixel resolution Pitch Fo r m a t Configuration 0.197 × 0.197 mm 1680 [...]

6–4 Maintenance and Servi ce Guide Spe cificat ions Ta b l e 6 - 3 17.0-inch, WXGA+, BrightVie w Display Dimensions Height Width Diagonal 23.00 cm 36.80 cm 43.40 cm 9.06 in 14.49 in 17.09 in Number of colors Up to 16.8 million Contrast ratio 200:1 Brightness 180 nits typical Pixel resolution Pitch Fo r m a t Configuration 0.259 × 0.259 mm 1280 ?[...]

Specific at ions Maintenance and Serv ice Guide 6–5 Ta b l e 6 - 4 Hard Drives 100-GB* 80-GB* 80-GB* Dimensions Height Width We i g h t 9.5 mm 70 mm 102 g 9.5 mm 70 mm 99 g 9.5 mm 70 mm 99 g Interface type ATA - 5 ATA - 5 ATA - 5 T ransfer rate Synchronous (maximum) Security 100 MB/sec A T A security 100 MB/sec ATA s e c u r i t y 100 MB/sec A T [...]

6–6 Maintenance and Servi ce Guide Spe cificat ions 60-GB* 60-GB* 40-GB* Dimensions Height Width We i g h t 9.5 mm 70 mm 102 g 9.5 mm 70 mm 99 g 9.5 mm 70 mm 99 g Interface type ATA - 5 ATA - 5 ATA - 5 T ransfer rate Synchronous (maximum) Security 100 MB/sec A T A security 100 MB/sec ATA s e c u r i t y 100 MB/sec A T A security Seek times (typic[...]

Specific at ions Maintenance and Serv ice Guide 6–7 Ta b l e 6 - 5 Primary 8-cell, Li-Ion Battery Pac k Dimensions Height Width Depth We i g h t 2.00 cm 9.40 cm 13.40 cm 0.34 kg 0.79 in 3.70 in 5.28 in 0.75 lb Energ y V oltage Amp-hour capacity W att-hour capacity 11.1 V 4.4 Ah 48 Wh T emperature Operating Nonoperating 5°C to 45°C 0°C to 60°C[...]

6–8 Maintenance and Servi ce Guide Spe cificat ions Ta b l e 6 - 6 D VD/CD-RW Combo Drive Applicable disc Read: D VD-R, D VD-RW , D VD-ROM (D VD-5, D VD-9, D VD-10, D VD-18), CD-ROM (Mode 1 and 2) CD Digital A udio, CD-XA ready (Mode 2, F or m 1 and 2), CD-I ready (Mode 2, F or m 1 and 2), CD-R, CD-R W , Photo CD (single and multisession), and CD[...]

Specific at ions Maintenance and Serv ice Guide 6–9 Ta b l e 6 - 7 DV D ± RW and CD-RW Doub le Lay er Combo Drive Applicable disc Read: D VD-R, D VD-R W , D VD-ROM (D VD-5, D VD-9, D VD-10, D VD-18), CD-ROM (Mode 1 and 2), CD Digital A udio, CD-XA ready (Mode 2, F or m 1 and 2), CD-I ready (Mode 2, F or m 1 and 2), CD-R, CD-R W , Photo CD (singl[...]

6–10 Maintenance and Servi ce Guide Spe cificat ions Data transfer rate CD-R (16X) CD-R W (8X) CD-ROM (24X) DV D ( 8 X ) D VD-R (4X) DV D - R W ( 2 X ) Multiword DMA mode 2 2,400 KB/s (150 KB/s at 1X CD rate) 1,200 KB/s (150 KB/s at 1X CD rate) 3,600 KB/s (150 KB/s at 1X CD rate) 10,800 KB/s (1,352 KB/s at 1X D VD rate) 5,400 KB/s (1,352 KB /s at[...]

Specific at ions Maintenance and Serv ice Guide 6–11 Disc thickness 1.2 mm (0.047 in) T rack pitc h 0.74 µm Access time CD D VD Random Full stroke < 175 ms < 285 ms < 230 ms < 335 ms A udio output level A udio-out, 0.7 Vr ms Cache buff er 2 MB Data transfer rate CD-R (16X) CD-R W (8X) CD-ROM (24X) DV D ( 8 X ) D VD-R (4X) DV D - R W [...]

6–12 Maintenance and Servi ce Guide Spe cificat ions Ta b l e 6 - 9 System DMA Hard ware DMA System Function DMA0 Not applicable DMA1* Not applicable DMA2* Not applicable DMA3 Not applicable DMA4 Direct memor y access controller DMA5* A vailab le for PC Card DMA6 Not assigned DMA7 Not assigned *PC Card controller ca n use DMA 1, 2, or 5.[...]

Specific at ions Maintenance and Serv ice Guide 6–13 T able 6-10 System Interrupts Hard ware IRQ System Function IRQ0 System timer IRQ1 Standard 101-/102-K ey or Microsoft Natura l Ke yboard IRQ2 Cascaded IRQ3 USB2 Enhanced Ho st Controller—24CD IRQ4 COM1 IRQ5* Conexant A C—Link Audio Data F ax Modem with Smar tCP IRQ6 Diskette drive IRQ7* Pa[...]

6–14 Maintenance and Servi ce Guide Spe cificat ions IRQ11 TI OHCI 1394 host controller TI PCI1410 CardBus controller IRQ12 Synaptics PS/2 T ouchP ad IRQ13 Numeric data processor IRQ14 Primar y IDE channel IRQ15 Secondar y IDE channel *Def ault configuration; audio possible configur ations are IRQ5, IRQ7, IRQ9, IRQ10, or none. ✎ PC Cards may as[...]

Specific at ions Maintenance and Serv ice Guide 6–15 T able 6-11 System I/O Addresses I/O Address (he x) System Function (shipping configuration) 000 - 00F DMA controller no . 1 010 - 01F Unused 020 - 021 Interr upt controller no . 1 022 - 024 Opti chipset configuration registers 025 - 03F Unused 02E - 02F 87334 “Super I/O” configuration for [...]

6–16 Maintenance and Servi ce Guide Spe cificat ions I/O Address (he x) System Function (shipping configuration) 0A2 - 0BF Unused 0C0 - 0DF DMA controller no . 2 0E0 - 0EF Unused 0F0 - 0F1 Coprocessor b usy clear/reset 0F2 - 0FF Unused 100 - 16F Unused 170 - 177 Secondary fixed disk controller 178 - 1EF Unused 1F0 - 1F7 Primar y fixed disk contro[...]

Specific at ions Maintenance and Serv ice Guide 6–17 I/O Address (he x) System Function (shipping configuration) 2F0 - 2F7 Unused 2F8 - 2FF Infrared por t 300 - 31F Unused 320 - 36F Unused 370 - 377 Secondary diskette driv e controller 378 - 37F P arallel por t (LPT1/default) 380 - 387 Unused 388 - 38B FM synthesizer—OPL3 38C - 3AF Unused 3B0 -[...]

6–18 Maintenance and Servi ce Guide Spe cificat ions T able 6-12 System Memory Map Size Memory Address System Function 640 KB 00000000-0009FFFF Base memory 128 KB 000A0000-000BFFFF Video memor y 48 KB 000C0000-000CBFFF Video BIOS 160 KB 000C8000-000E7FFF Unused 64 KB 000E8000-000FFFFF System BIOS 15 MB 00100000-00FFFFFF Extended memory 58 MB 0100[...]

Maintenance and Serv ice Guide A–1 A Conn ec tor P in A ssi gnm ents Ta b l e A - 1 A udio-Out (Headphone) Pin Signal Pin Signal 1 A udio out, left channel 3 Ground 2 A udio out, r ight channel[...]

A–2 Maintenance and Servi ce Guide Connec tor P in Assignments Ta b l e A - 2 A udio-In (Microphone) Pin Signal Pin Signal 1 A udio signal in 3 Ground 2 A udio signal in Ta b l e A - 3 Universal Serial Bus Pin Signal Pin Signal 1 +5 VDC 3 Data + 2 Data – 4 Ground[...]

Connector P in Assignments Maintenance and Serv ice Guide A–3 Ta b l e A - 4 External Monitor Pin Signal Pin Signal 1 Red analog 9 +5 VDC 2 Green analog 10 Ground 3 Blue analog 11 Monitor detect 4 Not connected 12 DDC 2B data 5 Ground 13 Horizontal sync 6 Ground analog 14 V er t ical sync 7 Ground analog 15 DDC 2B clock 8 Ground analog[...]

A–4 Maintenance and Servi ce Guide Connec tor P in Assignments Ta b l e A - 5 RJ-45 (Network) Pin Signal Pin Signal 1 T ransmit + 5 Unused 2 T ransmit – 6 Receive – 3 Receive + 7 Unused 4 Unused 8 Unused[...]

Connector P in Assignments Maintenance and Serv ice Guide A–5 Ta b l e A - 6 RJ-11 (Modem) Pin Signal Pin Signal 1 Unused 4 Unused 2T i p 5U n u s e d 3 Ring 6 Unused[...]

A–6 Maintenance and Servi ce Guide Connec tor P in Assignments Ta b l e A - 7 S-Video-Out Pin Signal Pin Signal 1 S-VHS color (C) signal 5 TV -CD 2 Composite video signal 6 S-VHS intensity ground 3 S-VHS intensity (Y) signal 7 Composite video ground 4 S-VHS color ground[...]

Maintenance and Serv ice Guide B–1 B P o w e r Cord Set Req uirements 3-Con duc tor P o wer Cord Set The wide range input feature of the computer permits it to operate from any line v oltage from 100 to 120 or 220 to 240 volts A C. The po wer cord set included with the computer meets the requirements for use in the country where the equipment is [...]

B–2 Maintenance and Servi ce Guide P ow er Cor d Set Requirements Gen eral Requirements The requirements listed belo w are applicable to all countries. ■ The length of the po wer cord set must be at least 1.5 m (5.0 ft) and a maximum of 2.0 m (6.5 ft). ■ All po wer cord sets must be approved b y an acceptable accredited agency responsible for[...]

P ow er Cord Set Requir ements Maintenance and Serv ice Guide B–3 Countr y- Spec ifi c Requirements 3-Conductor P ower Cord Set Requirements Country/Region Accredited Agency Applicable Note Number A ustralia EANSW 1 Au s t r i a OVE 1 Belgium CEBC 1 Canada CSA 2 Denmark DEMK O 1 Finland FIMK O 1 F rance UTE 1 Germany VDE 1 Italy IMQ 1 Jap a n ME [...]

B–4 Maintenance and Servi ce Guide P ow er Cor d Set Requirements Ko r e a E K 4 The Netherlands KE A 1 Norwa y NEMKO 1 P eople’s Repub lic of China CCC 5 Sweden SEMK O 1 Switzerland SEV 1 T aiwan BSMI 4 United Kingdom BSI 1 United States UL 2 ✎ NOTES: 1. The fle xible cord must be <HAR> T ype HO5VV -F , 3-conductor , 1.0 mm² conductor[...]

Maintenance and Serv ice Guide C–1 C Scre w List ing This appendix provides specif ication and reference information for the scre ws and screw locks used in the computer . All screws listed in this appendix are av ailable in the Computer Screw Kit, spare part number 403813-001, and the Display Scre w Kit, spare part number 403886-001. Phillips P [...]

C–2 Maintenance and Serv ice Guide Scr ew Listing Black Phillips P M2 .5×6 .0 Sc re w Locations Ta b l e C - 2 Black Phillips PM2.5×6.0 Scre w Color Qty . Length Thread Head Width Black 5 6.0 mm 2.5 mm 5.0 mm Where used: 1 Three screws that secure the hard driv e cover to the computer (scre ws are captured on the cov er by C clips; documented i[...]

Sc rew Li s t i n g Maintenance and Serv ice Guide C–3 Silv er Phillips P M2 .5×6 .0 S cr ew L ocations Ta b l e C - 3 Silver Phillips PM2.5×6.0 Screw Color Qty . Length Thread Head Width Silver 29 6.0 mm 2.5 mm 4.5 mm Where used: 4 screws that secure the hard driv e to the computer (documented in Section 5.4 ) mm[...]

C–4 Maintenance and Serv ice Guide Scr ew Listing Silv er Phillips P M2 .5×6 .0 Sc re w Locati on Ta b l e C - 3 Silver Phillips PM2.5×6.0 Screw (Continued) Color Qty . Length Thread Head Width Silver 29 6.0 mm 2.5 mm 4.5 mm Where used: One screw that secures the k eyboard asse mb ly to the computer (documented in Section 5.11 ) mm[...]

Sc rew Li s t i n g Maintenance and Serv ice Guide C–5 Silv er Phillips P M2 .5×6 .0 Sc re w Locati on Ta b l e C - 3 Silver Phillips PM2.5×6.0 Screw (Continued) Color Qty . Length Thread Head Width Silver 29 6.0 mm 2.5 mm 4.5 mm Where used: One screw that secures the displa y asse mbly to the computer (documented in Section 5.14 ) mm[...]

C–6 Maintenance and Serv ice Guide Scr ew Listing Silv er Phillips P M2 .5×6 .0 S cr ew L ocations Ta b l e C - 3 Silver Phillips PM2.5×6.0 Screw (Continued) Color Qty . Length Thread Head Width Silver 29 6.0 mm 2.5 mm 4.5 mm Where used: 3 screws that secure the top co ve r to the computer (documented in Section 5.15 ) mm[...]

Sc rew Li s t i n g Maintenance and Serv ice Guide C–7 Silv er Phillips P M2 .5×6 .0 S cr ew L ocations Ta b l e C - 3 Silver Phillips PM2.5×6.0 Screw (Continued) Color Qty . Length Thread Head Width Silver 29 6.0 mm 2.5 mm 4.5 mm Where used: 8 screws that secure the top co ve r to the computer (documented in Section 5.15 ) mm[...]

C–8 Maintenance and Serv ice Guide Scr ew Listing Silv er Phillips P M2 .5×6 .0 S cr ew L ocations Ta b l e C - 3 Silver Phillips PM2.5×6.0 Screw (Continued) Color Qty . Length Thread Head Width Silver 29 6.0 mm 2.5 mm 4.5 mm Where used: 2 screws that secure the base enclosur e support brack et to the computer (documented in Section 5.16 ) mm[...]

Sc rew Li s t i n g Maintenance and Serv ice Guide C–9 Silv er Phillips P M2 .5×6 .0 S cr ew L ocations Ta b l e C - 3 Silver Phillips PM2.5×6.0 Screw (Continued) Color Qty . Length Thread Head Width Silver 29 6.0 mm 2.5 mm 4.5 mm Where used: 4 screws that secure the system boar d to the computer (documented in Section 5.16 ) mm[...]

C–10 Maintenance and Servi ce Guide Scr ew Listing Phillips P M2 .5×6 .0 S cr ew L ocations Ta b l e C - 3 Phillips PM2.5×4.0 Screw (Continued) Color Qty . Length Thread Head Width Silver 29 6.0 mm 2.5 mm 4.5 mm Where used: 2 screws that secure the speak er to the computer (documented in Section 5.20 ) mm[...]

Sc rew Li s t i n g Maintenance and Serv ice Guide C–11 Silv er Phillips P M2 .5×6 .0 S cr ew L ocations Ta b l e C - 3 Silver Phillips PM2.5×6.0 Screw (Continued) Color Qty . Length Thread Head Width Silver 29 6.0 mm 2.5 mm 4.5 mm Where used: 4 screws that secure the heat sink to the computer (documented in Section 5.21 ) mm[...]

C–12 Maintenance and Servi ce Guide Scr ew Listing Phillips P M2 .5×4. 0 Scr ew L ocations Ta b l e C - 4 Phillips PM2.5×4.0 Screw Color Qty . Length Thread Head Width Black 20 4.0 mm 2.5 mm 4.5 mm Where used: 2 screws that secure the memory shie ld to the computer (documented in Section 5.6 ) mm[...]

Sc rew Li s t i n g Maintenance and Serv ice Guide C–13 Phillips P M2 .5×4. 0 Scr ew L ocations Ta b l e C - 4 Phillips PM2.5×4.0 Screw (Continued) Color Qty . Length Thread Head Width Black 20 4.0 mm 2.5 mm 4.5 mm Where used: 3 screws that secure the s witch co ver to the computer (documented in Section 5.10 ) mm[...]

C–14 Maintenance and Servi ce Guide Scr ew Listing Phillips P M2 .5×4. 0 Scr ew L ocations Ta b l e C - 4 Phillips PM2.5×4.0 Screw (Continued) Color Qty . Length Thread Head Width Black 20 4.0 mm 2.5 mm 4.5 mm Where used: 1 F our screws that secure the LED boa rd to the k eyboard frame (documented in Section 5.12 ) 2 Five scre ws that secure th[...]

Sc rew Li s t i n g Maintenance and Serv ice Guide C–15 Phillips P M2 .5×4. 0 Scr ew L ocations Ta b l e C - 4 Phillips PM2.5×4.0 Screw (Continued) Color Qty . Length Thread Head Width Black 20 4.0 mm 2.5 mm 4.5 mm Where used: 2 screws that secure the displa y panel to the display enclosure (documented in Section 5.14 ) mm[...]

C–16 Maintenance and Servi ce Guide Scr ew Listing Phillips P M2 .5×4. 0 Scr ew L ocations Ta b l e C - 4 Phillips PM2.5×4.0 Screw (Continued) Color Qty . Length Thread Head Width Black 20 4.0 mm 2.5 mm 4.5 mm Where used: 2 screws that secure the top co ve r to the computer (documented in Section 5.15 ) mm[...]

Sc rew Li s t i n g Maintenance and Serv ice Guide C–17 Phillips P M2 .5×4. 0 Scr ew Locati on Ta b l e C - 4 Phillips PM2.5×4.0 Screw (Continued) Color Qty . Length Thread Head Width Black 20 4.0 mm 2.5 mm 4.5 mm Where used: One screw that secures the connector b oard to the computer (documented in Section 5.16 ) mm[...]

C–18 Maintenance and Servi ce Guide Scr ew Listing Phillips P M2 .5×4. 0 Scr ew Locati on Ta b l e C - 4 Phillips PM2.5×4.0 Screw (Continued) Color Qty . Length Thread Head Width Black 20 4.0 mm 2.5 mm 4.5 mm Where used: One screw that secures the f an assembly and expansion port brack et to the system board (documented in Section 5.23 ) mm[...]

Sc rew Li s t i n g Maintenance and Serv ice Guide C–19 Phillips P M2 .5×13 .0 Sc re w Locations Ta b l e C - 5 Phillips PM2.5×13.0 Screw Color Qty . Length Thread Head Width Black 15 13.0 mm 2.5 mm 4.5 mm Where used: 1 One screw that secures the optical drive to the computer (documented in Section 5.9 ) 2 T wo scre ws that secure the switch co[...]

C–20 Maintenance and Servi ce Guide Scr ew Listing Phillips P M2 .5×13 .0 Sc re w Location Ta b l e C - 5 Phillips PM2.5×13.0 Screw (Continued) Color Qty . Length Thread Head Width Black 15 13.0 mm 2.5 mm 4.5 mm Where used: One screw that secures the k eyboard a ssemb ly to the computer (documented in Section 5.11 ) mm[...]

Sc rew Li s t i n g Maintenance and Serv ice Guide C–21 Phillips P M2 .5×13 .0 Sc re w Locations Ta b l e C - 5 Phillips PM2.5×13.0 Screw (Continued) Color Qty . Length Thread Head Width Black 15 13.0 mm 2.5 mm 4.5 mm Where used: 5 screws that secure the top co ve r to the computer (documented in Section 5.15 ) mm[...]

C–2 2 Maintenance and Servi ce Guide Scr ew Listing Phillips P M2 .5×13 .0 Sc re w Locations Ta b l e C - 5 Phillips PM2.5×13.0 Screw (Continued) Color Qty . Length Thread Head Width Black 15 13.0 mm 2.5 mm 4.5 mm Where used: 6 screws that secure the top co ve r to the computer (documented in Section 5.15 ) mm[...]

Sc rew Li s t i n g Maintenance and Serv ice Guide C–2 3 Phillips P M2 .5×9 . 0 Scr ew L ocations Ta b l e C - 6 Phillips PM2.5×9.0 Screw Color Qty . Length Thread Head Width Black 6 9.0 mm 2.5 mm 4.5 mm Where used: 5 screws that secure the displa y asse mbly to the computer (documented in Section 5.14 ) mm[...]

C–2 4 Maint enance and Service Gui de Scr ew Listing Phillips P M2 .5×9 . 0 Scr ew L ocation Ta b l e C - 6 Phillips PM2.5×9.0 Screw (Continued) Color Qty . Length Thread Head Width Black 6 9.0 mm 2.5 mm 4.5 mm Where used: One screw that secures the system bo ard to the computer (documented in Section 5.16 ) mm[...]

Sc rew Li s t i n g Maintenance and Serv ice Guide C–2 5 Phillips P M2 .5×7 . 0 Scr ew Locati ons Ta b l e C - 7 Phillips PM2.5×7.0 Screw Color Qty . Length Thread Head Width Black 10 7.0 mm 2.5 mm 4.5 mm Where used: 6 screws that secure the displa y bezel to the display assemb ly (documented in Section 5.14 ) mm[...]

C–2 6 Maint enance and Service Gui de Scr ew Listing Phillips P M2 .5×7 . 0 Scr ew Locati ons Ta b l e C - 7 Phillips PM2.5×7.0 Screw (Continued) Color Qty . Length Thread Head Width Black 10 7.0 mm 2.5 mm 4.5 mm Where used: 2 screws that secure the displa y panel to the display enclosure (documented in Section 5.14 ) mm[...]

Sc rew Li s t i n g Maintenance and Serv ice Guide C–2 7 Phillips P M2 .5×7 . 0 Scr ew Locati ons Ta b l e C - 7 Phillips PM2.5×7.0 Screw (Continued) Color Qty . Length Thread Head Width Black 10 7.0 mm 2.5 mm 4.5 mm Where used: 2 screws that secure the f an assembly to the system board (documented in Section 5.23 ) mm[...]

C–2 8 Maintenance and Servi ce Guide Scr ew Listing Phillips P M2 .0×4. 0 Scr ew L ocations Ta b l e C - 8 Phillips PM2.0×4.0 Screw Color Qty . Length Thread Head Width Black 13 4.0 mm 2.0 mm 4.0 mm Where used: 8 screws that secure the displa y hinges to the display panel (documented in Section 5.14 ) mm[...]

Sc rew Li s t i n g Maintenance and Serv ice Guide C–2 9 Phillips P M2 .0×4. 0 Scr ew L ocation Ta b l e C - 8 Phillips PM2.0×4.0 Screw (Continued) Color Qty . Length Thread Head Width Black 13 4.0 mm 2.0 mm 4.0 mm Where used: One screw that secures the displa y inverter to the display enclosure (documented in Section 5.14 ) mm[...]

C–30 Maintenance and Servi ce Guide Scr ew Listing Phillips P M2 .0×4. 0 Scr ew L ocations Ta b l e C - 8 Phillips PM2.0×4.0 Screw (Continued) Color Qty . Length Thread Head Width Black 13 4.0 mm 2.0 mm 4.0 mm Where used: 2 screws that secure the Bluetooth mo dule to the computer (documented in Section 5.17 ) mm[...]

Sc rew Li s t i n g Maintenance and Serv ice Guide C–31 Phillips P M2 .0×4. 0 Scr ew L ocations Ta b l e C - 8 Phillips PM2.0×4.0 Screw (Continued) Color Qty . Length Thread Head Width Black 13 4.0 mm 2.0 mm 4.0 mm Where used: 2 screws that secure the PC Card asse mb ly to the system board (documented in Section 5.24 ) mm[...]

C–3 2 Maint enance and Service Gui de Scr ew Listing Slotted M1.5×9 .0 Sc re w Locations Ta b l e C - 9 Slotted M1.5×9.0 Screw Color Qty . Length Thread Head Width Silver 2 9.0 mm 1.5 mm 4.0 mm Where used: 2 screws that secure the f an assembly to the system board (documented in Section 5.23 ) mm[...]

Maintenance and Serv ice Guide D–1 D Disp l ay Compon ent Recy c ling Å W ARN IN G: The bac klight contains mer cury . Cautio n should be ex erc ised when r emo ving and handling the bac klight to a voi d damaging this component and cau sing exposur e to the merc ury . Ä CAUT ION: The pr ocedures in this appe ndix can r esult in damage to displ[...]

D–2 Maintenance and Servi ce Guide Display C omponent Recy cling This appendix provides disassembl y instructions for the display assembly . The display assembly must be disassembled to gain access to the backlight 1 and the LCD panel 2 . ✎ Disassembly procedures dif fer from one display assembly to another . The procedures provided in this app[...]

Display C omponent R ecyc ling Maintenance and Serv ice Guide D–3 Perform the follo wing steps to disassemble the display assembly: 1. Remov e all screw co vers 1 and scre ws 2 that secure the display bezel to the display assembly . Remo ving the Displa y Bez el Scr ew Co vers and S cr ew s[...]

D–4 Maintenance and Servi ce Guide Display C omponent Recy cling 2. Lift up and out on the left and right inside edges 1 and the top and bottom inside edges 2 of the display bezel until the bezel disengages from the display assembly . 3. Remov e the display bezel 3 . Remo ving the Displa y Bez el[...]

Display C omponent R ecyc ling Maintenance and Serv ice Guide D–5 4. Disconnect all LCD panel cables 1 from the display in verter and remov e the in verter 2 . Remo ving the Displa y Inv erter[...]

D–6 Maintenance and Servi ce Guide Display C omponent Recy cling 5. Remov e all screws 1 that secure the LCD panel to the display enclosure. 6. Remov e the LCD panel 2 from the display enclosure. Re mov ing the L CD P anel[...]

Display C omponent R ecyc ling Maintenance and Serv ice Guide D–7 7. T urn the LCD panel upside down. 8. Remov e all screws that secure the LCD panel frame to the LCD panel. Re mov ing the L CD P anel Fr ame Scr e ws[...]

D–8 Maintenance and Servi ce Guide Display C omponent Recy cling 9. Use a sharp-edged tool to cut the tape 1 that secures the side of the LCD panel to the LCD panel frame. 10. Remov e the LCD panel frame 2 from the display panel. Re mov ing the L CD P anel Fr ame[...]

Display C omponent R ecyc ling Maintenance and Serv ice Guide D–9 11. Remov e the screws 1 that secure the backlight co ver to the LCD panel. 12. Lift the top edge of the backlight cov er 2 and swing it forward. 13. Remov e the backlight cove r . Re mov ing the Backligh t Co ver[...]

D–10 Maintenance and Serv ice Guide Display C omponent Recy cling 14. T urn the LCD panel right-side up. 15. Remov e the backlight cables 1 from the clip 2 in the LCD panel. Re leasing the Backli ght Cables[...]

Display C omponent R ecyc ling Maintenance and Serv ice Guide D–11 16. T urn the LCD panel upside down. 17. Remov e the backlight frame from the LCD panel. Re mov ing the Backligh t Fr ame[...]

D–12 Maintenance and Serv ice Guide Display C omponent Recy cling Å W ARN IN G: The bac klight contains mer cury . Cautio n should be ex erc ised when r emo ving and handling the bac klight to a voi d damaging this component and cau sing exposur e to the merc ury . 18. Slide the backlight out of the backlight frame. Re mov ing the Backligh t[...]

Display C omponent R ecyc ling Maintenance and Serv ice Guide D–13 19. Disconnect the display cable 1 from the LCD panel. 20. Remov e the screws 2 that secure the LCD panel to the LCD rear panel. 21. Release the LCD panel 3 from the LCD rear panel. 22. Release the tape 4 that secures the LCD panel to the LCD rear panel. Re leasing the L CD P anel[...]

D–14 Maintenance and Serv ice Guide Display C omponent Recy cling 23. Remov e the LCD panel. Re mov ing the L CD P anel 24. Recycle the backlight and LCD panel.[...]

Maintenance and Serv ice Guide Index–1 Ind e x 1394 port 1–11 A all-in-one media cable, spare part number 3–16 , 3–17 arrow keys 1–15 audio troubleshooting 2–23 audio Y-cable 2, spare part number 3–16 , 3–17 audio-in jack location 1–9 pin assignments A–2 audio-out jack location 1–9 pin assignments A–1 B base enclosure, spare[...]

Index–2 Maintenance and Service Guide Index right-side 1–8 top 1–16 , 1–18 , 1–21 computer feet illustrated 3–12 locations 5–11 Computer Setup Advanced Menu 2–6 File Menu 2–3 overview 2–1 Security Menu 2–4 Tools Menu 2–5 Computer Setup defaults 2–2 computer specifications 6–1 connector pin assignments audio-in A–2 audi[...]

Index Maintenance and Serv ice Guide Index–3 removal 5–20 spare part number 3–5 , 3–15 , 3–18 , 5–20 specifications 6–8 DVD±RW and CD-RW Double Layer Combo Drive OS loading problems 2–22 precautions 4–3 removal 5–20 spare part number 3–5 , 3–15 , 3–18 , 5–20 specifications 6–9 DVD±RW and CD-RW Double Layer Combo Driv[...]

Index–4 Maintenance and Service Guide Index fn key 1–15 front components 1–6 G grounding equipment and methods 4–6 H hard drive OS loading problems 2–18 precautions 4–3 removal 5–7 spare part numbers 3–7 , 3–15 , 3–18 , 3–20 , 5–7 specifications 6–5 hard drive bay 1–23 hard drive cover illustrated 3–12 removal 5–8 ha[...]

Index Maintenance and Serv ice Guide Index–5 memory/Mini PCI module compartment cover illustrated 3–12 location 1–23 removal 5–13 microphone jack, pin assignments A–2 Mini PCI communications module removal 5–16 spare part numbers 3–9 , 3–17 , 3–18 modem connector cable illustrated 3–13 removal 5–60 modem jack location 1–13 p[...]

Index–6 Maintenance and Service Guide Index power management features 1–5 power supply, spare part number 3–16 , 3–19 power, troubleshooting 2–10 precautions DVD/CD-RW Combo Drive 4–3 DVD±RW and CD-RW Double Layer Combo Drive 4–3 DVD±RW and CD-RW Double Layer Combo Drive with LightScribe 4–3 hard drive 4–3 optical drive 4–3 pr[...]

Index Maintenance and Serv ice Guide Index–7 hard drive 6–5 I/O addresses 6–15 interrupts 6–13 memory map 6–18 optical drive 6–8 system DMA 6–12 static shielding materials 4–8 S-Video-out jack location 1–10 pin assignments A–6 switch cover removal 5–22 spare part number 3–3 , 3–19 , 5–22 system board removal 5–50 spare[...]

Index–8 Maintenance and Service Guide Index W Windows applications key 1–15 Windows logo key 1–15 wireless antenna removal 5–42 spare part number 3–11 , 3–20 , 5–42 wireless button 1–17 wireless light 1–13 , 1–16 workstation precautions 4–6[...]

Home file:///C|/Documents%20and%20Settings/zefie/My%20Documents/DV8000.html (1 of 4) [5/29/2008 8:16:27 PM][...]

Home 1 Display assemblies (include display cable, wireless antenna boards, and antenna cables) 17-inch, WSXGA+, TFT, single-lamp with BrightView 403797-001 17-inch, WXGA+, TFT, single-lamp with BrightView 403796-001 2 Switch cover (includes LED board and LED board cable) 403817-001 3 Keyboard assembly frame 403818-001 4 LED boards (include LED boar[...]

Home 13 Optical drive connector boards For use with HP Pavilion dv8200 models 417031-001 For use with HP Pavilion dv8000 models 403829-001 14 Fan assembly 403826-001 15 Processors AMD Turion 64 ML-44 (2.4-GHz) 410324-001 AMD Turion 64 ML-40 (2.2-GHz) 430499-001 AMD Turion 64 ML-40 (2.2-GHz) 393579-001 AMD Turion 64 ML-37 (2.0-GHz) 393578-001 AMD Tu[...]

Home 4200-rpm, 100-GB 403804-001 4200-rpm, 60-GB 405937-001 23 8-cell, 4.4-hour battery 403808-001 24 Mini PCI communications modules 802.11a/b/g wireless local access network (WLAN) module for use in North America 403791-001 802.11a/b/g WLAN module for use in the rest of the world 403792-001 802.11b/g WLAN module for use in North America 392557-00[...]