Chicago Electric Cookerhoods инструкция обслуживания

10” TILE SA W 24” DEEP CUT - 2.5 HP Model 91482 ASSEMBL Y AND OPERA TING INSTR UCTIONS 3491 Mission Oaks Blvd., Camarillo , CA 93011 Visit our W eb site at: http://www .harborfreight.com Cop yright 2004 by Harbor F reight T ools ® . All rights reser ved. No por tion of this manual or any ar twork contained herein ma y be reproduced in any shap[...]

SKU 91482 For technical questions, please call 1-800-444-3353. Page 2 PR ODUCT SPECIFICA TIONS SA VE THIS MANU AL Y ou will need this manual f or the safety warnings and precautions, assemb ly , operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. K eep your in v oice with this manual. Write the inv oice numb[...]

SKU 91482 For technical questions, please call 1-800-444-3353. Page 3 3. Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. ELECTRICAL SAFETY 1. Grounded tools must be plugged into an outlet properly installed and grounded in accordance with all codes and ordinances. Never remove t[...]

SKU 91482 For technical questions, please call 1-800-444-3353. Page 4 2. Dress properl y . Do not wear loose c lothing or jewelry . Contain long hair . K eep your hair , clothing, and gloves a wa y from mo ving par ts. Loose clothes, je welry , or long hair can be caught in mo ving par ts . 3. A v oid accidental star ting. Be sure the P ower Switch[...]

SKU 91482 For technical questions, please call 1-800-444-3353. Page 5 7. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that ma y affect the tool’ s operation. If dama g ed, have the tool serviced before using. Many accidents are caused by poorly main- tained tools. 8. Use only accessories that are r[...]

SKU 91482 For technical questions, please call 1-800-444-3353. Page 6 2. The grounding prong in the plug is connected through the green wire inside the cord to the grounding system in the tool. The green wire in the cord must be the only wire connected to the tool’ s grounding system and must ne ver be attached to an electr ically “live” ter [...]

SKU 91482 For technical questions, please call 1-800-444-3353. Page 7 FIGURE B 6. If you are using an extension cord outdoors, make sure it is marked with the suffix “W -A” (“W” in Canada) to indicate it is acceptable f or outdoor use. 7. Make sure your extension cord is properly wired and in good electrical condition. Always replace a dama[...]

SKU 91482 For technical questions, please call 1-800-444-3353. Page 8 1. Maintain a safe working en vironment. Keep the w or k area well lit. Make sure there is adequate surrounding workspace. Alwa ys k eep the work area free of obstructions, grease, oil, tr ash, and other debris. Do not use the Tile Saw in areas near flammable chemicals , dusts, a[...]

SKU 91482 For technical questions, please call 1-800-444-3353. Page 9 13. Do not use the Tile Saw f or cutting metals or f or cutting curves. This ma y cause the Saw Blade to break and/or reduce its service life . 14. Make sure the Saw Blade is wet at all times when cutting. 15. K eep all electrical connections dry and off the ground. 16. Use cold [...]

SKU 91482 For technical questions, please call 1-800-444-3353. Page 10 28. T urn off the Tile Saw and allo w the Sa w Blade to stop on its o wn if the Saw Blade is to be backed out of an uncompleted cut. 29. Never attempt to remo ve material stuck in the Tile Saw while it is plugged in or running. 30. When cutting a large w orkpiece make sure its e[...]

SKU 91482 For technical questions, please call 1-800-444-3353. Page 11 ALUMINUM BASE (38) ALUMINUM COLUMN (35) BOL T (30) LARGE W ASHER (32) BOL T (59) W ASHER (58) POSITION TUBE (57) SHAFT (36) REAR VIEW FIGURE D KNOB (31) ASSEMBL Y INSTRUCTIONS NO TE: For additional inf ormation regarding the par ts listed in the follo wing pages, ref er to the A[...]

SKU 91482 For technical questions, please call 1-800-444-3353. Page 12 W A TER T ANK (3) MA CHINE FRAME (11) FIGURE E BOL T (93) EXTENSION T ABLE (94) MAIN T ABLE (99) FIGURE G FIGURE F ELECTRICAL RECEPT A CLE PUMP (105) PUMP PO WER CORD W A TER HOSE (PRE-A TT A CHED) (PLA CE PUMP IN REAR OF W A TER T ANK) 6 . Plug the P ower Cord of the Pump (105)[...]

SKU 91482 For technical questions, please call 1-800-444-3353. Page 13 CHANGING OR INST ALLING A SA W BLADE 1. W ARNING! Alwa ys make sure the P ower Switch of the Tile Saw is in its “OFF” position and the unit is unplugged from its electrical outlet prior to assembling the unit, adding any accessories, or making an y adjustments to the unit. 2[...]

SKU 91482 For technical questions, please call 1-800-444-3353. Page 14 FIGURE I BRAKE SHAFT (68) FIGURE K SA W BLADE (65) FIGURE L KNOB (53) BLADE GU ARD (60) FIGURE J NUT (67) OUTER FLANGE (66) WRENCH 7. Refasten the Outer Flange (66) and Nut (67). Make sure to tighten the Nut fully bef ore using the Tile Saw . (See Figure J .) 8. Loosen the Knob [...]

SKU 91482 For technical questions, please call 1-800-444-3353. Page 15 OPERA TING INSTRUCTIONS 1. Place the Saw (or sa w and stand, if the optional stand is installed) on a le vel, e ven surf ace , capable of suppor ting the tool and any f orces ex er ted during work . Fill the W ater T ank (3) with enough cold w ater so that the Pump (105) is comp[...]

SKU 91482 For technical questions, please call 1-800-444-3353. Page 16 4. Attach the 45° Miter Block (108) as y ou did the P arallel Guide , using the Knob (86) on the side of the Guide. (See Figure O .) FIGURE O 45° MITER BLOCK (108) KNOB (86) 5. Plug the P ower Cord of the Tile Saw into the nearest, 120 v olt, grounded, electrical outlet. 6. Ma[...]

SKU 91482 For technical questions, please call 1-800-444-3353. Page 17 INSPECTION, MAINTENANCE, AND CLEANING 1. W ARNING! Make sure the P ow er Switch of the Tile Saw is in its “OFF” position and that the unit is unplugged from its electrical outlet before perf or ming any inspec- tion, maintenance, or cleaning procedures . 2. Bef ore each use,[...]

SKU 91482 For technical questions, please call 1-800-444-3353. Page 18 P AR TS LIST P art # D escr ipt i o n Q t y. P art # D escri pti on Q t y. 1 W ash er 4 61 S cr ew 3 2 N u t 2 62 R u bber P ad 1 3 W at er T ank 1 63 B ear i ng 2 4 E l ast i c W a sher 4 64 I nn er Fl ange 1 5 B ol t 2 65 S aw B l ade (not i ncl uded ) 1 6 R ubber I nsert 1 66[...]

SKU 91482 For technical questions, please call 1-800-444-3353. Page 19 ASSEMBL Y DIA GRAM NO TE: Some parts are listed and shown f or illustration purposes only , and are not av ailable individually as replacement parts. 105A 105B 105C 105D[...]