Dukane 8808 инструкция обслуживания

Portable LCD Pr ojector Model 8806 8808 USER’S MANUAL[...]

• IBM is a trademark or registered trademark of International Business Machines Corporation. • Macintosh, Mac OS X and Powerbook are trademarks of Apple Computer , Inc., registered in the U.S. and other countries. • Windows, Windows 98, Windows Me, Windows XP or Windows 2000 are trademarks or registered trademarks of Microsoft Corporation. ?[...]

i Important Information Safety Cautions Precautions Please read this manual carefully before using your 880 6/8808 projector and keep the manual handy for future reference. Y our serial number is located on the right side of your projector . Record it here: CAUTION T o turn off main power , be sure to remove the plug from power outlet. The power ou[...]

ii Important Information EU-wide legislation as implemented in each Member State requires that used electrical and electronic products carrying the mark (left) must be disposed of separately from normal household waste. This includes projectors and their electrical accessories or lamps. When you dispose of such products, please follow the guidance [...]

iii Important Information RF Interference (for USA only) W ARNING The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT those specified. in this manual. Failure to comply with this government regulation could void your right to operate this equipment. This equipment has been tested and found to comply [...]

iv Important Information Fire and Shock Pr ecautions • Ensure that there is sufficient ventilation and that vents are unobstructed to prevent the build-up of heat inside your projector . Allow at least 4 inches (10cm) of space between your projector and a wall. • Do not try to touch the ventilation outlet on the left front (when seen from the f[...]

v Caution on Handling the Optional Lens When shipping the projector with the optional lens, remove the optional lens before shipping the projector . The lens and the lens shift mechanism may encounter damage caused by improper handling during transportation. Lamp Replacement • T o replace the lamp, follow all instructions . • Be sure to replace[...]

vi T able of Contents Important Information .......................................................................................... i 1. Introduction ......................................................................................................... 1  What's in the Box? .............................................................[...]

vii T able of Contents  Adjusting V olume Up & Down ..................................................................................... 33  Using the Laser Pointer .............................................................................................. 34 Setting the function switch ................................................[...]

viii  Menu Descriptions & Functions [Adjust] ..................................................................... 72 [Picture] ................................................................................................................. 72 [Image Options] ..................................................................................[...]

1 1. Intr oduction  What's in the Box? Make sure your box contains everything listed. If any pieces are missing, contact your dealer . Please save the original box and packing materials if you ever need to ship your Projector . OFF VIDEO S -V IDEO V IE WER LAN COMPUTER COMPONENT ON POWER POWER LASER 3D REFORM AUTO A DJ. ASPECT HELP PICTURE [...]

2 1. Introduction  Intr oduction to the Projector This section introduces you to the projector and describes key features and controls. Congratulations on Y our Purchase of the Pr ojector The is a sophisticated XGA projector that produces an enhanced display . With the 8806 /8808 you will be able to project images up to 500" (measured diago[...]

3 • Free downloadable Software Geometric Correction T ool 3.0. Corrects the geometry of an image projected onto a cylindrical, spherical or corner screen via serial connection. For additional information visit: US : http://www . dukcorp.com/av Europe : http://www .neceurope.com/ Global : http://www .nec-pj.com/ About this user's manual The f[...]

4 PC CARD LAMP STATUS POW ER ON/STAND BY SOURCE AUTO ADJUST 3D REFORM SELECT PC CARD LAMP STATUS POWER ON/STAND BY SOURCE AUTO ADJUST 3D REFORM LE N S S H IF T L E F T R IG H T DOWN UP PC C ARD LAMP STATUS POWER SOURCE AUTO ADJUST 3D REFORM ON/STAND BY SELECT P C C ARD LAMP STATUS POWER SOURCE AUTO ADJUST 3D REFORM ON/STAND BY SELECT LENS SH IF T L[...]

5 1. Introduction Bottom Carrying Handle Carrying the Projector Always carry your projector by the handle. Ensure that the power cable and any other cables connecting to video sources are disconnected before moving the projector . When moving the projector or when it is not in use, cover the lens with the lens cap. NOTE: T o stand the projector on [...]

6 1. Introduction T o lock the carr ying handle 1. Carefully place the projector on its end. 2. Pull up the carrying handle with the catch pressed down. 3. Press down the left and right locks to set the carrying handle in place. • T o place back the carrying handle, press up the left and right locks and pull down the carryng handle.[...]

7 1. Introduction T op Features 1. POWER Button (ON / ST AND BY) ( → page 24 , 35 ) NOTE: T o turn on the projector , press and hold this button for a minimum of two seconds. T o turn off the projector , press this button twice. 2. POWER Indicator ( ) ( → page 24 , 35 , 11 7 ) 3. ST A TUS Indicator ( → page 11 7 ) 4. LAMP Indicator ( → page[...]

8 1. Introduction T erminal Panel Features 1. COMPUTER 1 IN/Component Connector (Mini D- Sub 15 Pin) ( → page 13 , 15 ) AUDIO IN (Stereo Mini Jack) ( → page 13 , 14 , 16 ) 2. COMPUTER 2 IN/Component (R/cr , G/V , B/cb, H, V) Connectors (BNC x 5) ( → page 13 ) AUDIO IN (Stereo Mini Jack) ( → page 13 ) 3. COMPUTER 3 IN Connector (DVI-D 24 Pin[...]

9 1. Introduction  Part Names of the Remote Contr ol 4. LED Flashes when any button is pressed. 5. POWER ON Button ( → page 24 ) NOTE: T o turn on the projector , press and hold the POWER ON button for a minimum of two seconds. 6. POWER OFF Button ( → page 35 ) NOTE: T o turn off the projector , press the POWER OFF but- ton twice. 7. COMPUTE[...]

10 1. Introduction Battery Installation 1 Press the catch and remove the battery cover . 2 Install new ones (AA). Ensure that you have the batteries' po- larity (+/–) aligned correctly . 3 Slip the cover back over the bat- teries until it snaps into place. NOTE: Do not mix different types of batteries or new and old batteries. NOTE: Actual o[...]

11 1. Introduction Using the Remote Control in Wir ed Operation Connect one end of the supplied remote cable to the REMOTE mini jack and the other end to the remote jack on the remote control. NOTE: Connecting the remote cable to the REMOTE mini jack on the terminal panel will make the wireless operation unavailable. LASER 3D REFORM AUTO ADJ. ASPEC[...]

12 This section describes how to set up your projector and how to connect PCs, video and audio sources. 2. Installation and Connections  Setting Up the Scr een and the Projector The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is approximately 30 inches (0.76 m) measured diagonally wh[...]

13 2. Installation and Connections  Making Connections Connecting Y our PC or Macintosh Computer NOTE: When using with a notebook PC, be sure to connect the projector and notebook PC while the projector is in standby mode and before turning on the power to the notebook PC. In most cases the output signal from the notebook PC is not turned on unl[...]

14 COMPUTER 3 IN PHONE AUDIO IN 2. Installation and Connections When Viewing a DVI Digital Signal T o project a DVI digital signal, be sure to connect the PC and the projector using a DVI-D signal cable (not supplied) before turning on your PC or projector . T urn on the projector first and select DVI (DIGIT AL) from the source menu before turning [...]

15 2. Installation and Connections COMPUTER 1 IN Before connections: An exclusive SCART adapter (ADP-SC1) and a commercially available SCAR T cable are re- quired for this connection. From the menu, select [Setup] → [Options] → [Signal Select] → [Computer 1] → [Scart]. SCART is a standard European audio-visual connector for TVs, VCRs and DV[...]

16 AUDIO IN AUDIO OUT PHONE MONITOR OUT COMPUTER 1 IN (or COMPUTER 2 IN / COMPONENT IN) 2. Installation and Connections Connecting an External Monitor Y ou can connect a separate, external monitor to your projector to simultaneously view on a monitor the RGB analog or component image you're projecting. NOTE: • Daisy chain connection is not p[...]

17 AUDIO IN LR AUDIO OUT L R Component YC b C r COMPONENT IN AUDIO IN 2. Installation and Connections Connecting Y our DVD Player with Component Output DVD player Audio Equipment Audio cable (not supplied) Component video RCA ⳯ 3 cable (not supplied) TIP: A component signal will be automatically displayed. If not, from the menu, select [Setup] ?[...]

18 AUDIO IN LR AUDIO OUT L R VIDEO OUT S-VIDEO VIDEO S-VIDEO IN VIDEO IN AUDIO IN 2. Installation and Connections Connecting Y our VCR or Laser Disc Player S-Video cable (not supplied) Video cable (not supplied) VCR/ Laser disc player Audio equipment Audio cable (not supplied) TIP: Y ou can connect a video cable to the "Y" connector of th[...]

19 LAN Connecting to a Network The 8806 /8808 comes standard with a LAN port (RJ-45) which provides a LAN connection using a LAN cable. Placing the optional wireless LAN card (NWL-100*) in the PC card slot of the projector also provides a wireless LAN connection. T o use a LAN connection, you are required to assign an IP address to the projector . [...]

20 (B) Example of wireless LAN connection (Network T ype → Mode: Infrastructure) 2. Installation and Connections T o make connection with a wired LAN via an access point, you need to select the Infrastructure mode. From the menu, select [Setup] → [Installation] → [LAN Mode] → [PC Card] → [Advanced] → [Network T ype] → [Mode] → [Infr[...]

21 2. Installation and Connections Inserting the PC Card 1. Make sure the main power is off before inserting the PC card. (This step is needed only when the wireless LAN card being inserted into the projector's PC CARD slot) 2. Hold the PC card horizontally and insert it slowly into the PC card slot with its top facing up. The eject button pop[...]

22 SE LECT SE LECT SE LECT 2. Installation and Connections NOTE: Some PC cards cannot be used based on their size and shape. PC Card T ype The PC Card slot accepts PCMCIA T ype II only . NOTE: The projector does not support NTFS formatted flash memory card or USB memor y device. Be sure to use a flash memory card or USB memor y device formatted wit[...]

23 2. Installation and Connections Connecting the Supplied Power Cable Connect the supplied power cable to the projector . First connect the supplied power cable's three-pin plug to the AC IN of the projector , and then connect the other plug of the supplied power cable in the wall outlet. P C CAR D LAM P STATUS PO W ER ON/STAND B Y SOURCE AUT[...]

24 OFF VIDEO S-VIDEO VIEWER LAN COMPUTER COMPONENT ON SELECT POWER POWER M E N U E N T E R E X I T 3 1 2 POWER ON/STAND BY PC CARD LAMP STATUS SOURCE AUTO ADJUST 3D REFORM 3. Pr ojecting an Image (Basic Operation) This section describes how to turn on the projector and to project a picture onto the screen.  T urning on the Projector NOTE: • Th[...]

25 OFF VIDEO S-VIDEO VIEWER LAN COMPUTER COMPONENT ON POWER POWER M E N U E N T E R E X I T 3 1 2 SELECT 3. Projecting an Image (Basic Operation) Note on Startup scr een (Menu Language Select screen) When you first turn on the projector , you will get the Startup menu. This menu gives you the opportunity to select one of the 21 menu languages. T o [...]

26 3. Projecting an Image (Basic Operation)  Selecting a Sour ce Selecting the computer or video source Detecting the Signal Automatically Press and hold the SOURCE button for a minimum of 1 second, the projector will search for the next available input source. Each time you press and hold the SOURCE button for a minimum of 1 second, the input s[...]

27 3. Projecting an Image (Basic Operation) Use the lens shift dials, the adjustable tilt foot levers, the zoom lever or the focus ring to adjust the picture size and position.  Adjusting the Pictur e Size and Position PC CARD LAM P STATU S POW ER O N / S T A N D B Y SOURCE AUTO ADJUST 3D REFORM SELECT PC CARD LAM P STATU S POW ER O N / S T A N [...]

28 3. Projecting an Image (Basic Operation) Adjusting the position of a projected image • Rotate the lens shift dial. PC CARD LAMP STATUS POW ER ON /S TAND BY S O U R C E A U T O A D JU S T 3 D R EFO R M SELECT PC CARD LAMP STATUS POWER ON /S TAND BY S O U R C E A U T O A D JU S T 3 D R EFO R M LENS SHIFT LEFT RIGHT DOWN UP Desktop front projecti[...]

29 3. Projecting an Image (Basic Operation) Adjusting the focus (Focus ring) • Rotate the focus ring to make focus adjustment. PC C ARD LAMP STATUS POWER ON/STAND BY S O U R C E A U T O A D J U S T 3 D R E F O R M SELECT PC C ARD LAMP STATUS POWER ON/STAND BY S O U R C E A U T O A D J U S T 3 D R E F O R M LENS RELEASE Focus ring Finely adjusting[...]

30 Adjusting the Tilt Foot 1. Lift the front edge of the projector . CAUTION: Do not try to touch the ventilation outlet during T ilt Foot adjustment as it can become heated while the projector is turned on and during its cool down period after it is turned off. 2. Push up the Adjustable T ilt Foot Levers on the right and left sides of the projecto[...]

31  Corr ecting Keystone Distortion When the projector is not exactly perpendicular to the screen, keystone distortion occurs. T o overcome it, you can use the "Keystone" function , a digital technology that can adjust for keystone-type distortion, resulting in a crisp, square image. The following procedure explains how to use the [Key[...]

32 NOTE: • If the projection angle is the same as in the last use, the previous cor rection setting values are retained in the memory . • When doing Step 2, adjust the position of image so that the screen is smaller than the area of the projected area. • T o reset the 3D Reform correction setting values, press and hold the 3D REFORM button fo[...]

33 3. Projecting an Image (Basic Operation)  Optimizing an RGB Image Automatically Adjusting the Image Using Auto Adjust Optimizing an RGB image automatically . Press the Auto Adjust button to optimize an RGB image automatically . This adjustment may be necessary when you connect your computer for the first time. [Poor picture] [Normal picture] [...]

34 3. Projecting an Image (Basic Operation)  Using the Laser Pointer Y ou can use the laser to draw your audience's attention to a red dot that you can place on any object. CAUTION: • Do not look into the laser pointer while it is on. • Do not point the laser beam at a person. • Do not allow children to use the laser pointer . Press a[...]

35 OFF VIDEO S-VIDEO VIEWER LAN COMPUTER COMPONENT ON SELECT POWER POWER M E N U E N T E R E X I T 3 1 2  T urning off the Projector T o turn off the projector: 3. Projecting an Image (Basic Operation) 1. Press the POWER (ON/ST AND BY) button on the projector cabinet or the POWER OFF button on the remote control. The [Power Off / Are you sure?] [...]

36 FREEZE 3D REFORM AUTO ADJ. ASPECT HELP PICTURE PIC-MUTE LAMP MODE R - CLICK L - CLICK MOUSE VOLUME MAGNIFY PAGE UP DOWN PIC-MUTE 3D REFORM AUTO ADJ. ASPECT HELP PICTURE LAMP MODE FREEZE VOLUME MAGNIFY PAGE UP DOWN 4. Convenient Featur es  T urning Off the Image and Sound Press the PIC-MUTE button to turn off the image and sound for a short pe[...]

37 4. Convenient Features OFF VIDEO S-VIDEO VIEWER LAN COMPUTER COMPONENT ON SELECT POWER POWER M E N U 3 1 2 E N T E R E X I T  Getting Integrated Help Y ou get the contents about Help in English, German and Japanese. 1. Press the HELP button on the remote control. • When no menus appear , the "How to Use Help" screen will be displa[...]

38 Operate the Menus using the USB mouse Mouse Cursor When connecting a USB mouse to the projector , you get a mouse cursor on the screen. Unless you use your USB mouse within 10 seconds, the mouse cursor disappears. NOTE: Y ou can change the shape of the mouse cursor . T o do so, select the menu → [Setup] → [T ools] → [Mouse] → [Mouse Poin[...]

39 4. Convenient Features  Using the Optional Remote Mouse Receiver The optional remote mouse receiver enables you to operate your computer’s mouse functions from the remote con- trol. It is a great convenience for your computer-generated presentations. Connecting the remote mouse receiver to your computer If you wish to use the remote mouse f[...]

40 4. Convenient Features Operating your computer ’ s mouse from the remote control Y ou can operate your computer's mouse from the remote control. P AGE UP/DOWN Button ................. scrolls the viewing area of the window or to move to the previous or next slide in PowerPoint on your computer . SELECT  Button ................[...]

41  Corr ecting Horizontal and V ertical Keystone Distortion (Cor - nerstone) Use the 3D Reform feature to correct keystone (trapezoidal) distortion to make the top or bottom and the left or right side of the screen longer or shorter so that the projected image is rectangular . 4. Convenient Features Projected image Cornerstone 1. Press and hold[...]

42 8. Press the ENTER button. 4. Convenient Features 10 . Press the SELECT  or  button to highlight the [OK] and press the ENTER button. This completes the Cornerstone correction. Selecting [Cancel] will return to the adjustment screen without saving changes (Step 3). Selecting [Reset] will return to the factory default. Selecting [Undo] will[...]

43 4. Convenient Features * The following are conditions under which the maximum angle is achived: • When the standard lens is used • When the lens shift is set to the center • When the lens shift is used and yet the image is not displayed in the center of the screen, the adjustable range will be increased or decreased. • Image is projected[...]

44 4. Convenient Features  Making Fr eehand Drawings on a Projected Image (ChalkBoar d) The ChalkBoard feature allows you to write and draw messages on a projected image. NOTE: Selecting another sour ce will quit the ChalkBoard function. NOTE: The ChalkBoard feature is available only when a USB mouse is used. T o display the ChalkBoard tool bar [...]

45 4. Convenient Features  Pr eventing Unauthorized Use of the Projector Assigning a keyword prevents the projector from being used by unauthorized individuals. Assigning a Keyword for the first time 1. Press the MENU button. The menu will be displayed. 2. Press the SELECT  button to highlight the [Setup] submenu and press the ENTER button. T[...]

46 4. Convenient Features 4. Press the SELECT  button four times to highlight [Security]. 5. Press the ENTER button to display the Security screen. 6. Press the SELECT  button once to highlight the Keyword entry box and press the ENTER button. The Software keyboard will be displayed.[...]

47 4. Convenient Features 7. Enter an alphanumeric keyword using the Software keyboard For example, to enter “1234”, follow the steps 7-1 to 7-4 below . NOTE: • Please make a note of your keyword. • Do not use spaces (SP) in your keyword. 7-1. Highlight the number “1” and press the ENTER button. The asterisk “  ” will be displaye[...]

48 4. Convenient Features Checking If Security is enabled T urn off the projector and turn it back on to check if the Security function is enabled. 1. Press the POWER (ON/ST ANDBY) button. The [Power Off / Are you sure?] message will appear. Press the ENTER button or the POWER (ON/ST ANDBY) or the POWER OFF button again. The lamp lights off and the[...]

49 Disabling the Security 1. Press the MENU button. The menu will be displayed. NOTE: Immediately after the projector has been turned on and the “Projector is locked! Enter your keyword.” message is displayed at the bottom of the screen, pressing the MENU button will display the Keyword entry will be displayed. At this time, pressing the MENU b[...]

50  Operation Using an HTTP Br owser Overview The use of HTTP server functions will allow control of the projector from a web browser without the installation of special software. Please be sure to use “Microsoft Internet Explorer 4.x” or a higher version for the web browser . (This device uses “JavaScript” and “Cookies” and the brow[...]

51 Structure of the HTTP Server Power: This controls the power of the projector . On ................... Power is switched on. Off ................... Power is switched off. V olume: This controls the volume of the projector .  ..................... Increases the volume adjustment value.  ..................... Decreases the volume adjustment [...]

52 Source Select: This switches the input connector of the projector . Computer1 ...... Switches to the COMPUTER 1 IN connector . Computer2 ...... Switches to the COMPUTER 2 IN connector . Computer3 ...... Switches to the COMPUTER 3 IN connector . Component ..... Switches to the COMPONENT IN connectors. Video ............... Switches to the VIDEO I[...]

53 4. Convenient Features  Using the Pr ojector to Operate a Computer Connected on a Network (Desktop Contr ol Utility 1.0) When Desktop Control Utility 1.0 on the included User Supportware 3 CD-ROM is installed on the computer , that computer can be operated using the projector over a network. For example, say you have a PowerPoint file on a co[...]

54 4. Convenient Features Important: • Y our startup password will be required each time you start Desktop Control Utility 1.0. • If you forget or lost your startup password, in- stall the program again. Operations on the Computer 1. Connect the computer to the LAN and make the required settings. 2. Install Desktop Control Utility 1.0 on the co[...]

55 4. Convenient Features Operations on the projector – Connecting to the computer 1. Make the LAN settings on the projector . Make the LAN settings at [Setup] → [Installation] → [LAN Mode] in the menu. ( → page 89 ) 2. Connect a commercially available USB mouse to the projector . ( → page 38 ) 3. Click anywhere on the screen with the USB[...]

56 9. Input the password you made a note of in the previous Step 6 in “Operations on the Computer”. 10. Input the password and click [OK]. The password input window is turned off. 1 1. Click the PC search icon . The PC search window appears. 12. Click [OK]. The connection selection window appears. • T o search by inputting the IP address of t[...]

57 The following operations are available only with buttons on the projector cabinet or the remote control.  Disconnect icon ................. Use to cut off communications with the computer .  Shift icon ............................ Select this icon and press the ENTER button to set the shift lock mode. Select this icon and press the ENTER b[...]

58 5. Using the V iewer  Making the Most out of the V iewer Function Features The Viewer feature allows you to view slides stored on a PC memory card (referred to as PC card in this manual) or USB memory on the projector . Even if no computer is available, presentations can be conducted simply with the projector . This feature is convenient for [...]

59 5. Using the V iewer  Saving data to a PC car d or USB memor y device There are two ways to save your data to a PC card or USB memory device. Using Ulead Photo Explor er 8.0 Install Ulead Photo Explorer 8.0 from the supplied User Supportware 3 CD-ROM to your computer . Use Ulead Photo Explorer 8.0 to create PowerPoint files or graphic data on[...]

60 5. Using the V iewer  Operating the V iewer Function from the Pr ojector (playback) This section describes the operation for showing slides created using the V iewer function with the projector . It is also possible to make slides directly from the images projected with the projector . Projecting slides (V iewer) Preparation: Store JPEG or BM[...]

61 5. Using the V iewer 0000.jpg 0001.jpg 0002.jpg 3 Files Slot 1 RECYCLED PICTURE 1/3 0000.jpg 60KB 08/21/2005 06/29 263KB select : ENTER ? Highlight .................................. Indicates the selected folder or drive. List of folders .......................... Indicates folders contained on a PC card or USB memory . Information ............[...]

62 5. Using the V iewer Setting Option for Viewer Play Mode: Manual .................. Views a slide manually when the Viewer sour ce is selected. Auto ...................... Plays back slides automatically when the Viewer source is selected. Interval: Specifies interval time between 5 and 300 seconds. Start: Specifies start screen when the Viewer [...]

63 Exiting Viewer T o exit Viewer , switch to another input such as Computer 1, Computer 2, Computer 3, Component, Video, S-V ideo or LAN. * T o switch to another input, there are two ways: * Press the COMPUTER 1, COMPUTER 2, COMPUTER 3, COMPONENT , VIDEO, S-VIDEO or LAN button on the remote control. * Press the MENU button on the remote control to[...]

64 5. Using the V iewer  Changing Backgr ound Logo Y ou can change the default background logo using the Viewer feature. NOTE: File size must be 256KB or less. File formats other than JPEG, BMP , non-interlaced GIF or non-interlaced PNG are not available. Preparation: Store JPEG or BMP files (JPEG, BMP , non-interlaced GIF or non-interlaced PNG [...]

65  Using the Menus 1. Press the MENU button on the remote control or the projector cabinet to display the menu. NOTE: The commands such as  , ENTER, EXIT in the gray bar show available buttons for your operation. 2. Press the SELECT  buttons on the remote control or the projector cabinet to display the submenu. 3. Press the ENTER bu[...]

66  Menu tr ee Menu Item Source Computer 1, Computer 2, Computer 3, Component, Video, S-Video, Viewer , LAN, Entry List Adjust Picture Mode Standard, Professional Preset 1 to 6 Detail Settings General Reference High-Bright, Presentation, Video, Movie, Graphic, sRGB Gamma Correction Dynamic, Natural, Black Detail Color T emperature 5000, 6500, 78[...]

67 6. Using On-Screen Menu Menu Item Setup Installation Orientation Desktop Front, Ceiling Rear , Desktop Rear , Ceiling Front Screen Screen T ype: 4:3, 16:9 / Position LAN Mode Built-in Profiles: Profile 1, Profile 2 DHCP: On, Off IP Address Subnet Mask Gateway DNS Configuration Reconnect PC Card Profiles: Easy Connection, Profile 1, Profile 2 DHC[...]

68  Menu Elements Slide bar Solid triangle Highlight Ta b Radio button Check box Cancel button OK button Menu windows or dialog boxes typically have the following elements: Highlight ................ Indicates the selected menu or item. Solid triangle ......... Indicates further choices are available. A highlighted triangle indicates the item is[...]

69 6. Using On-Screen Menu  Menu Descriptions & Functions [Sour ce] Computer 1 and 2 Selects the computer connected to your COMPUTER 1 or COMPUTER 2 input connector signal. NOTE: An optional component cable (Component V or ADP-CV1 cable) is needed for a component signal. Computer 3 (RGB Digital) Selects the computer connected to your COMPUTE[...]

70 6. Using On-Screen Menu [Entry List] Use the SELECT  buttons on your remote control or the projector cabinet to select the signal and press the ENTER button on the remote control or the projector cabinet to display the [Entry Edit Command] screen. Entering the Currently Projected Signal into the Entry List 1. Display the Entry List. 2. Use[...]

71 6. Using On-Screen Menu [Entry Edit Command] Y ou can edit signals on the [Entry List]. Load ...................... Enables you to select a signal from the list. Store ..................... Enables you to store the currently projected signal. Cut ........................ Enables you to remove a selected signal from the list and place it on the &[...]

72 6. Using On-Screen Menu  Menu Descriptions & Functions [Adjust] [Picture] [Mode] This function allows you to determine how to save settings for [Detail Settings] of [Preset] for each input. Standard : Saves settings for each item of [Preset] (Preset 1 through 6) Professional : Saves all the settings of [Picture] for each input. [Preset] T[...]

73 6. Using On-Screen Menu [Detail Settings] This will provide you with three pages of menus that provide more detailed settings. [General] Selecting Reference Setting [Reference] This feature allows you to use color correction or gamma values as reference data to optimize for various types of images. Y ou can select one of the following six settin[...]

74 6. Using On-Screen Menu [Brightness] Adjusts the brightness level or the back raster intensity . [Contrast] Adjusts the intensity of the image according to the incoming signal. Y ou have two options: Manual and Auto. NOTE: The Auto Contrast function will not work when the menu or a message is displayed [Sharpness] Controls the detail of the imag[...]

75 6. Using On-Screen Menu [Image Options] Adjusting Clock and Phase [Clock/Phase] This allows you to manually adjust Clock and Phase. Clock ..................... Use this item to fine tune the computer image or to remove any vertical banding that might appear . This function adjusts the clock frequencies that eliminate the horizontal banding in th[...]

76 6. Using On-Screen Menu Adjusting Horizontal/V ertical Position [Horizontal/V ertical Position] Adjusts the image location horizontally and vertically . Masking Unwanted Area [Blanking] This feature allows you to mask any unwanted area of the screen image. Selecting Overscan Percentage [Overscan] Select overscan percentage (0%, 5% and 10%) for s[...]

77 6. Using On-Screen Menu Input Signal Screen T ype 4:3 Screen 16:9 Screen 4:3 4:3 Window 4:3 Fill Squeeze Wide Screen Wide Screen Crop Letterbox 4:3 Letterbox Letterbox Selecting Aspect Ratio [Aspect Ratio] Screen T ype 4:3 Screen T ype 16:9 Aspect Ratio allows you to select the best Aspect mode to display your source image. When screen type 4:3 [...]

78 6. Using On-Screen Menu [Video] T urning On/Off 3 Dimension Separation [3D Y/C Separation] This function turns on or off the 3 dimensional separation feature. Off ............................... T urns off the function. On Still ................. Recommended for a still image. Normal ............ The projector detects and corrects the image auto[...]

79 6. Using On-Screen Menu [Sound] Controlling Sound [V olume/Bass/T reble/Balance] Adjusts the volume, bass and treble level, left and right balance of the projector speaker and AUDIO OUT (Stereo Mini Jack). Enabling 3D Surround [3D Surround] T urn on or off the 3D surround ef fect. If the AUDIO OUT stereo mini jack of the projector is connected t[...]

80 6. Using On-Screen Menu  Menu Descriptions & Functions [Setup] [Basic] Selecting Keystone Mode [Keystone] This feature allows you to correct keystone distortion. Selecting this item will display the Keystone setting menu. Y ou can correct vertical distortion manually from the menu. ( → page 31 ) Changes will be saved even when you turn [...]

81 6. Using On-Screen Menu Using the W all Color Correction [W all Color] This function allows for quick adaptive color correction in applications where the screen material is not white. The following nine options are available. Setting Lamp Mode to Normal or Eco [Lamp Mode] This feature enables you to select two brightness modes of the lamp: Norma[...]

82 6. Using On-Screen Menu [Menu] Selecting Menu Color [Color Select] Y ou can choose a color for the menu. T urning On / Off Source Display , Message and Time [Display Select] Source ................... This option turns on or off input name display such as Computer 1, Computer 2, Computer 3, Component, Video, and No Input to be displayed on the t[...]

83 6. Using On-Screen Menu Setting a Password [Menu Lock] / [Logo Lock] A password can be set for your projector to avoid operation by an unauthorized person. When [Menu Lock] is set, changing the menu from Basic to Advanced will display the Password input screen. When [Logo Lock] is set, doing any one of the following two operations will display t[...]

84 6. Using On-Screen Menu [Security] The Security function enables you to protect your projector so that the projector will not project a signal unless you enter a keyword. There is also an option to lock the projector by using a registered PC card* or USB memory* as a protect key . Once you have registered your PC card as a protect key , you are [...]

85 6. Using On-Screen Menu T o register a PC card or USB memory device as a protect key . Preparation: Insert the PC card into the PC card slot of the projector or insert the USB memory device into the USB port (type A) of the projector . 1. Use the SELECT  or  button to select [Use Protect Key] and press the ENTER button. 2. Use the SELECT ?[...]

86 6. Using On-Screen Menu • The security disable mode is maintained until the main power is turned off (by setting the main power switch to "O" or unplugging the power cord). In the following cases you will be asked to check the protect key or input the keyword: (1) When [OK] is selected at an image for which security is set and the po[...]

87 6. Using On-Screen Menu [Installation] Selecting Projector Orientation [Orientation] This reorients your image for your type of projection. The options are: desktop front projection, ceiling rear projection, desktop rear projection, and ceiling front projection. Desktop front Ceiling rear Desktop rear Ceiling front NOTE: What is PJLink? PJLink i[...]

88 Selecting Aspect Ratio and Position for Screen [Screen] Screen T ype ........... Select one of two options: 4:3 Screen or 16:9 Screen for the screen to be used. See also [Aspect Ratio]. ( → page 77 ) Position ................. This feature allows you to adjust the vertical position of the image when 16:9 has been selected for the screen type. [...]

89 6. Using On-Screen Menu [LAN Mode] Setting LAN Mode This feature allows you to set various setting items when the projector is used on your network. CAUTION • Consult with your network administrator about these settings. • Connect a LAN cable (Eathernet cable) to the LAN port (RJ-45). ( → page 19 ) • For wireless LAN connection, use the [...]

90 6. Using On-Screen Menu T o receive error messages or information on the remaining lamp life via e-mail: 1. On the [Mail] tab, select [Alert Mail] and press the ENTER button. A check mark will be placed. 2. Set [Sender's Address], [SMTP Server Name] and [Recipient's Address]. Select [OK] and press the ENTER button. ( → page 95 ) T o [...]

91 6. Using On-Screen Menu [PC Card] Profiles (for PC Card): T o execute a wireless LAN easily using Image Express Utility 2.0, select [Easy Connection]. Up to two settings for the optional wireless LAN card can be stored in memory of the projector . Select [Profile 1] or [Profile 2] and then do settings for [DHCP] and the other options. After doin[...]

92 6. Using On-Screen Menu [Advanced] menu [Network T ype] (required for wireless only) Site Survey: Displays a list of available SSIDs for wireless LAN on site. Select an SSID which you can access. T o select an SSID, highlight [SSID] and use the SELECT  to select [OK] and press the ENTER button. : access point : Ad Hoc PC : WEP enabled NOTE: Y[...]

93 6. Using On-Screen Menu [WEP] (required for wireless only) Select this option whether using the WEP (W ired Equivalent Privacy) key for encryption or not. T o use encryption, specify WEP key . Disable .................. Will not turn on the encryption feature. Y our communications may be monitored by someone. 64bit ...................... Uses 64[...]

94 6. Using On-Screen Menu Using Software Keyboard to enter an encryption key 1. Select one of [Key 1], [Key 2], [Key 3] and [Key 4] and press the ENTER button. The software keyboard will be displayed. 2. Use the SELECT  button to select one key and press the ENTER button. 3. After finishing entering the WEP key , use the SELECT ?[...]

95 6. Using On-Screen Menu [Mail] Alert Mail: Checking this box enables Alert Mail feature. This option notifies your computer of an error message via e-mail when using wireless or wired LAN. The error message will be notified when the projector lamp has reached the end of its usable life or an error occurs in the projector . Sample of a message se[...]

96 6. Using On-Screen Menu [Projector Name] Specify a unique projector name. Press to display the software keyboard and type in. Up to 16 alphanumeric characters can be used. After entering a name, select [OK] and press the ENTER button. Using Software Keyboard 1 to 0 and Characters ....... Use to type in password or keyword. MODE .................[...]

97 6. Using On-Screen Menu [Options] Setting Auto Adjust [Auto Adjust] This feature sets the Auto Adjust mode so that the RGB image can be automatically or manually adjusted for noise and stability . Y ou can automatically make adjustment in two ways: [Normal] and [Fine]. Off ......................... The RGB image will not be automatically adjuste[...]

98 6. Using On-Screen Menu Selecting Signal Format [Signal Select] Computer 1/2 Allows you to set [Computer 1] and [Computer 2] to automatically detect an incoming RGB or component source such as a computer or DVD player . However there may be some RGB and component signals that the projector is unable to detect. In this case, select [RGB] or [Comp[...]

99 6. Using On-Screen Menu [T ools] Selecting the ChalkBoard [ChalkBoard] This option displays the ChalkBoard tool bar . The ChalkBoard feature allows you to write and draw messages on a projected image. ( → page 44 ) NOTE: The ChalkBoard feature is available only when a USB mouse is used. Using Off T imer [Off Timer] 1. Select your desired time [...]

100 NOTE: • Before setting the Program T imer , make sure that the [Date, Time Preset] feature is set. ( → page 96 ) • Make sure that the projector is in the stand by condition with the Main Power Switch on. • The projector has a built-in clock. The clock will keep working for about two weeks after the main power is turned off. If the main [...]

101 5. Set the Active option. • Use the SELECT  or  button to select [Active] and press the ENTER button. A check mark will be placed in [Active]. 6. Complete the settings. • Use the SELECT  or  button to select the [OK] button and press the ENTER button. On- time or off-time will be set. Y ou will be returned to the Program Timer s[...]

102 Delete the programmed settings 1. On the Program Timer screen, use the SELECT  or  button to select a program you want to delete and press the ENTER button. • The [Command] screen will be displayed. 2. Use the SELECT  or  button to select the [Delete] button and press the ENTER button. • The programmed setting will be deleted. Y[...]

103 6. Using On-Screen Menu  Menu Descriptions & Functions [Information] Displays the lamp and the projector usage hours, the status of the current signal and settings and LAN settings. This dialog box has seven pages. The information included are as follows: [Usage Time] Lamp Life Remaining (%) Lamp Hours Used (H) Filter Hours Used (H) Proj[...]

104 6. Using On-Screen Menu [Source Page1] Input T erminal Signal T ype Video T ype Source Name Entry No. [Source Page2] Horizontal Frequency Vertical Frequency Sync T ype Sync Polarity Scan T ype[...]

105 6. Using On-Screen Menu [LAN Built-in] This page shows information on settings for the LAN port (RJ-45) IP Address ............. Indicates the IP address of the projector when the LAN port (RJ-45) is used. Subnet Mask ......... Indicates the subnet mask of the projector when the LAN port (RJ-45) is used Gateway ................ Indicates the ga[...]

106 6. Using On-Screen Menu [LAN Wir eless] This page shows information on settings for WEP key for encryption. SSID ...................... Indicates the identifier (SSID) for your wireless LAN. Mode ..................... Indicates that [Easy Connection], [Infrastructure] or [802.11 Ad Hoc] is selected for your communication method WEP ............[...]

107 6. Using On-Screen Menu  Menu Descriptions & Functions [Reset] Returning to Factor y Default The Reset feature allows you to change adjustments and settings to the factory preset for sources by the following methods: [Current Signal] Resets the adjustments for the current signal to the factory preset levels. All the items in [Adjust] can[...]

108 7. Maintenance This section describes the simple maintenance procedures you should follow to clean the filters and replace the lamp.  Cleaning or Replacing the Filter The air-filter sponge keeps dust and dirt from getting inside the projector and should be cleaned after every 100 hours of operation (more often in dusty conditions). If the fi[...]

109 7. Maintenance 2. Gently peel off the filter (sponge) and replace it with the new one. The filter is attached self-adhesive tape. Peel off a release paper before use. 3. Reinstall the new filter cover . • Slip the filter cover back until it snaps into place. 4. Connect the supplied power cable, turn on the Main Power switch and turn on the pr[...]

110  Replacing the Lamp After your lamp has been operating for 2000 hours (up to 3000 hours in Eco mode) or longer , the LAMP indicator in the cabinet will blink red. Even though the lamp may still be working, replace it at 2000 (up to 3000 hours in Eco mode) hours to maintain optimal projector performance. After replacing the lamp, be sure to c[...]

111 7. Maintenance 2. Loosen the two screws securing the lamp housing until the phillips screwdriver goes into a freewheeling condition. The two screws are not removable. Remove the lamp housing by holding it. NOTE: There is an interlock on this case to prevent the risk of electrical shock. Do not attempt to cir cumvent this interlock. 3. Insert a [...]

112 7. Maintenance 5. Connect the supplied power cable, turn on the Main Power switch and turn on the projector . 6. Finally, select the menu → [Reset] → [Clear Lamp Hours] to reset the lamp life remaining and lamp usage hours. NOTE: When the lamp exceeds 2100 hours (up to 3100 hours in Eco mode) of service, the projector cannot turn on and the[...]

113 8. Using Optional Lenses Five optional lenses are available for the 8806/8808. See the information described on this page to buy the appropriate lens for your screen size and throw distance. See page 11 5 for installing the lens.  T able of Thr ow Distances and Screen Sizes for Optional Lenses ST ANDARD (H X 1.5) - (H X 2.0) NP01FL (H X 0.8)[...]

114 8. Using Optional Lenses  Lens Shift Adjustable Range The top right diagram shows the location of the image position in the lens. The lens can be shifted within the shaded area as shown using the normal projection position as a starting point. The projector has a lens shift feature that allows you to move the image vertically or horizontally[...]

115  Replacing with Optional Lens CAUTION • Do not give a shock or excessive load to the projector or the lens components as the projector and lens compo- nents contain precision parts. • When shipping the projector with the optional lens, remove the optional lens before shipping the projector . The lens and the lens shift mechanism may enco[...]

116 8. Using Optional Lenses Using the anti-theft screw to prevent theft of the lens Tighten the supplied anti-theft scr ew on the fr ont bottom. Hole of anti-theft screw for lens unit[...]

117 9. Appendix  T r oubleshooting This section helps you resolve problems you may encounter while setting up or using the projector . Indicator Messages Power Indicator Lamp Indicator Indicator Condition Projector Condition Note Off Blinking light Steady light Normal Lamp has reached its end of life. Lamp replacement message will be displayed. [...]

118 9. Appendix Common Problems & Solutions ( → "Power/Status/Lamp Indicator" on page 11 7 ) Does not turn on Will turn off No picture Color tone or hue is unusual Image isn’t square to the screen Picture is blurred Image is scrolling vertically , horizontally or both Remote control does not work Indicator is lit or blinking Verti[...]

119 9. Appendix If there is no picture, or the picture is not displayed correctly . • Power on process for the projector and the PC. Be sure to connect the projector and notebook PC while the projector is in standby mode and before turning on the power to the notebook PC. In most cases the output signal from the notebook PC is not turned on unles[...]

120 9. Appendix  Specifications This section provides technical information about the projector's performance. Model Number 8806 Optical LCD Panel 0.8" p-Si TFT active-matrix with (Aspect ratio 4:3) Resolution 1024 ⳯ 768 pixels* up to UXGA with Advanced AccuBlend (up to 1400 ⳯ 1050 @ 60 Hz on DVI-D) Standard Lens Manual zoom and fo[...]

121 9. Appendix Mechanical Installation Orientation: Desktop/Front, Desktop/Rear , Ceiling/Front, Ceiling/Rear Dimensions 15.7" (W) ⳯ 5.9" (H) ⳯ 14.1" (D) 399 mm (W) ⳯ 150.5 mm (H) ⳯ 358 mm (D) (not including protrusions) Weight 16.1 lbs/7.3 kg Environmental Considerations Operational T emperatures : 41 ° to 104 ° F / 5 ° [...]

122 9. Appendix  Cabinet Dimensions 150.5/5.9" 358/14.1" 4.7/0.19" 168.3/6.63" 399/15.7" 3D REFORM SELECT MENU EXIT ENTER AUTO ADJUST SOURCE ON/STAND BY POWER STATUS LAMP PC CARD LENS SHIFT LEFT RIGHT DOWN UP Unit: mm/inch[...]

123  Scr een Size and Projection Distance This section should be used when considering the distance to the screen and the screen size. Available projection distances are 1.0 m/41.2 inches for 30" screen to 18 m/718 inches for 500" screen, according to the chart. Using the Chart Example for 100" screen: The projection distance is a[...]

124 List of Screen Sizes NOTE: Distances may vary +/-5%. Screen Size and Projection Distance for Desktop when the standard lens is used The following drawing shows an example for use of Desktop. Horizontal projection position: Lens centered left to right V ertical projection position: See the table below . 88 mm/3.47" Projector foot H1 H2 Lens[...]

125 Mini D-Sub 15 Pin Connector  Pin Assignments of D-Sub COMPUTER 1 Input Connector Signal Level Video signal : 0.7Vp-p (Analog) Sync signal : TTL level 51 42 3 10 11 12 13 14 15 6 97 8 9. Appendix Pin No. RGB Signal (Analog) YCbCr Signal 1 Red Cr 2 Green or Sync on Green Y 3 Blue Cb 4 Ground 5 Ground 6 Red Ground Cr Ground 7 Green Ground Y Gro[...]

126 9. Appendix  Compatible Input Signal List Signal Resolution Frequency H. Refresh Rate ( Dots ) ( kHz ) ( Hz ) D: Images above flagged with "D" are supported by digital signal. NOTE: • Advanced AccuBlend technology is an intelligent pixel blending technology that displays scaled high and low resolution images with true resolution.[...]

127 9. Appendix Cable Connection Communication Protocol Baud rate ........................................ 38400 bps Data length ..................................... 8 bits Parity .............................................. No parity Stop bit .......................................... One bit X on/off .......................................... [...]

128 9. Appendix  Using Softwar e Keyboard 1 to 0 and Characters .............................. Use to type in password or keyword. MODE .................... Selects one of three modes for alphabet and special characters. SP ......................... Inserts a space BS ......................... Deletes one character backward  .................[...]

129 No image is displayed from your PC or video equipment to the projector . Still no image even though you connect the projector to the PC first, then start the PC. Enabling your notebook PC’ s signal output to the projector . • A combination of function keys will enable/disable the ex- ternal display . Usually , the combination of the “Fn?[...]

130 In the space below please describe your problem in detail. Information on application and environment where your projector is used Projector Model number: Serial No.: Date of pur chase: Lamp operating time (hours): Lamp Mode: 䡺 Normal 䡺 Eco Information on input signal: Horizontal synch frequency [ ] kHz Vertical synch frequency [ ] Hz Synch[...]

1 2 4 5 6 7 1. What Y ou Can Do with User Supportware 3 2. Operating Environment 4. Attaching LAN Car d 5. Setting the LAN Setting of Projector 6. Setting the LAN Setting of Personal Computer ([Example] Wireless LAN of Windows XP:Ad Hoc connection) 7. Refer to “User’ s Guide” and Help This manual describes the LAN settings to use the software[...]

Introduction Thank you for purchasing the projector (hereafter referred to as the “ projector ” ). The projector is equipped with the following features so that you can give ef fective presentations. • LAN port (RJ-45), USB port (type A), PC card slot (TYPE II) supplied as standard • Viewer that displays images from a flash memory card *1 a[...]

1 Cautions on Usage • A wireless LAN card is not meant for use with facilities or equipment involving the safeguard of human life, such as medical equipment, nuclear facilities or equipment, aeronautical or space equipment, transportation facilities or equipment, etc., or with facilities or equipment requiring high levels of reliability . Do not [...]

2 Contents Introduction ................................................................................ Inside cover Caution s on Usage ........................................................................................ 1 Content s ......................................................................................................... 2 1. W[...]

3 1. What Y ou Can Do with User Supportware 3 What Y ou Can Do with User Supportware 3 1 1. What Y ou Can Do with User Supportware 3 1-1. Image Express Utility 2.0 Image Express Utility 2.0 is a software tool used to send the screen of your personal computer to the projector via a network, without the signal cables. ● High-speed, high-quality ima[...]

4 1. What Y ou Can Do with User Supportware 3 ● Projected images can be transferred and saved to personal computers. When “ Meeting Mode ” is used, projected images can be sent to the personal computers of all the participants (attendants) of a “ Meeting ” . The received images can be saved to your personal computer with a memo (text data[...]

5 1. What Y ou Can Do with User Supportware 3 What Y ou Can Do with User Supportware 3 1 1-2. Desktop Control Utility 1.0 Desktop Control Utility 1.0 is software that operates the desktop screen of a personal computer at a remote location from the projector by using a network. ● A commercially available USB mouse is connected to the projector to [...]

6 1. What Y ou Can Do with User Supportware 3 1-3. Ulead Photo Explorer 8.0 SE Basic Ulead Photo Explorer 8.0 SE Basic (hereafter referred to as “ Ulead Photo Explorer 8.0 ” ) is a multimedia image file management tool developed by Ulead Systems, Inc. This tool has functions to capture images from a digital camera or scanner and to process or e[...]

7 1. What Y ou Can Do with User Supportware 3 What Y ou Can Do with User Supportware 3 1 1-4. V iewer PPT Converter 3.0 Viewer PPT Converter 3.0 is software that converts files created with PowerPoint 95/97/ 2000/ 2002/2003 into an index file that can be displayed with the viewer function of the projector . ● When converting, specify a flash memo[...]

8 2. Operating Environment 2. Operating Environment 2-1. Supported Projector User Supportware 3 supports the following projector (as of October 2005) 8 806 Dukane Reference PC Control Utility 3.0 can be used with projectors other than the above projectors. For details, refer to the help function of PC Control Utility 3.0.[...]

9 2 2. Operating Environment Operating Environment 2-2. Operating Environment The following is the operating environment for Image Express Utility 2.0. For the operating environment of other software, please refer to the help function of each software. Windows 2000 Prof essional Windows XP Home Edition Windows XP Prof essional Windows XP T ablet PC[...]

10 3. Connecting LAN Cable 3. Connecting LAN Cable Connect a LAN cable to the LAN port (RJ-45) of the projector when connecting the projector to wired LAN. After connecting LAN cable to the projector , set the required settings for the projector ( page 24). PC CARD COMPONENT IN USB LAN AUDIO IN COMPUTER 3 IN COMPUTER 1 IN COMPUTER 2 IN PC CONTROL M[...]

11 4. Attaching Wireless LAN Card Attaching Wireless LAN Card 4 4. Attaching Wireless LAN Card Insert the wireless LAN card into the PC card slot on the rear panel of the projector . Important • The wireless LAN card must be inserted into the PC card slot in the correct direction. It cannot be inserted in the reverse direction. If the card is ins[...]

12 4. Attaching Wireless LAN Card ■ Removing card from PC card slot 1 Press POWER ON/STAND BY button to set the projector to Stand-by mode, press the “ O (off) ” side of the main power switch of the projector . 2 Slowly press the PC card eject button. The PC card eject button will slightly come forward. 3 Slowly press the PC card eject button[...]

13 Setting the LAN Setting of Projector 5. Setting the LAN Setting of Projector 5 5. Setting the LAN Setting of Projector Reference For how to turn on/off the power to the projector and how to operate the buttons and remote control of the projector , refer to “ User ’ s Manual ” included in the User ’ s Manual CD-ROM. 5-1. Displaying On-Scr[...]

14 5. Setting the LAN Setting of Projector 4 Press the button three times to highlight the “ Installation ” tab. 5 Press the SELECT  button three times to highlight “ LAN Mode ” , and press the button. The “ LAN Mode ” screen will be displayed. • T o make setting of wireless LAN Proceed to “ 5-2. Wireless LAN ” ( next page). ?[...]

15 Setting the LAN Setting of Projector 5. Setting the LAN Setting of Projector 5 5-2. Wireless LAN When inserting the wireless LAN card into the PC card slot of the projector , configure the LAN settings in the “ PC Card ” page of “ LAN Mode ” selected from On-Screen Menu. ■ Flow of Setting Setting of "Network T ype". Select SS[...]

16 5. Setting the LAN Setting of Projector ■ Setting Wireless LAN 1 Display the “ PC Card ” page of “ LAN Mode ” . Configure the setting of wireless LAN in the "PC Card ” page of “ LAN Mode ” selected from On-Screen Menu. <1> In the “ LAN Mode ” setting window , if the “ Built-in ” tab is highlighted, press the bu[...]

17 Setting the LAN Setting of Projector 5. Setting the LAN Setting of Projector 5 3 Set “ DHCP ” . Check this check box if the network to which the projector is to be connected automatically assigns the IP address via the DHCP server . <1> Press the SELECT  button once to highlight the “ DHCP ” check box and press the button. A che[...]

18 5. Setting the LAN Setting of Projector 5 Input “ Subnet Mask ” . If “ DHCP ” is not checked, input the subnet mask of the network to which the projector is connected. The method of inputting is the same as that of the “ IP Address ” field. 6 Input “ Gateway ” . If “ DHCP ” is not checked, input the default gateway of the net[...]

19 Setting the LAN Setting of Projector 5. Setting the LAN Setting of Projector 5 9 Select SSID from “ Site Survey ” (if necessary). A list of SSID that can be connected to wireless LAN in this place are displayed, and the SSID that are to be connected are selected from this list. When SSID is selected from the list, the “ SSID ” field, “[...]

20 5. Setting the LAN Setting of Projector 11 Select “ Mode ” (if necessary). The communication mode of the SSID selected in “ Site Survey ” are automatically selected. The settings can be changed by moving the highlight to the “ Mode ” field and pressing the button. • “ Infrastructure ” .............. This is selected if communic[...]

21 Setting the LAN Setting of Projector 5. Setting the LAN Setting of Projector 5 13 Select “ WEP ” page (if necessary). Proceed to step 17 if WEP is not set. <1> Use the SELECT  /  button to select the “ Network T ype ” tab, and press the button to highlight the “ WEP ” tab. The “ WEP ” page will be displayed. 14 Select[...]

22 5. Setting the LAN Setting of Projector 16 Input “ Key 1 ” to “ Key 4 ” . If “ 64 bit ” , “ 128 bit ” , or “ 152 bit ” is selected from “ WEP ” , input an encryption key . Set the same encryption key as the access point and personal computer to be connected by the wireless LAN. Four types of keys can be input for WEP . Au[...]

23 Setting the LAN Setting of Projector 5. Setting the LAN Setting of Projector 5 17 Finalize “ Advanced ” . <1> Use the SELECT  /  button to highlight [OK] and press the button. The “ PC card ” page will be displayed again. 18 Reconnect the network. <1> Use the SELECT  /  button to highlight “ Reconnect ” and pr[...]

24 5. Setting the LAN Setting of Projector 5-3. Wired LAN When connecting a LAN cable to the LAN port of the projector , configure the LAN settings in the “ Built-in ” page of “ LAN Mode ” selected from On-Screen Menu. ■ Flow of setting 1 3 Step Display "Built-in" page of "LAN Mode". 4 Step Input "IP Address"[...]

25 Setting the LAN Setting of Projector 5. Setting the LAN Setting of Projector 5 ■ Setting Wired LAN 1 Display the “ Built-in ” page of “ LAN Mode ” . Configure the setting of wired LAN in the “Built-in” page of “LAN Mode” selected from On-Screen Menu. If “LAN Mode” is not displayed, refer to “5-1. Displaying On-Screen Menu[...]

26 6. Setting the LAN Setting of Personal Computer 6. Setting the LAN Setting of Personal Computer ([Example] Wireless LAN of Windows XP: Ad Hoc connection) This section explains the procedure for Ad Hoc connection of wireless LAN between the personal computer and projector , by using the wireless network setting function with Windows XP Service Pa[...]

27 Setting the LAN Setting of Personal Computer 6. Setting the LAN Setting of Personal Computer 6 3 Right-click the [Wireless Network Connection] icon and click [Property]. 3 -2 3 -1 Right-click Click A property window for wireless network connections will be displayed. 4 From the list of [This connection uses the following Items:], select (click) [...]

28 6. Setting the LAN Setting of Personal Computer 5 Click [Use the following IP address:], and input [IP address]and[Subnet mask]. • If, for example, the [IP address] and [Subnet mask] of the projector are set as show in “ Example of settings for projector ” on page 26, set the personal computer as shown below . • Example of setting the IP[...]

29 Setting the LAN Setting of Personal Computer 6. Setting the LAN Setting of Personal Computer 6 9 Right-click the [Wireless Network Connection] icon and click [V iew Available Wireless Networks]. 9 -1 Right-click 9 -2 Click The “ Wireless Network Connection ” window is displayed. 10 From the list, select SSID of the projector to be connected [...]

30 6. Setting the LAN Setting of Personal Computer 11 Input WEP key to set up an encryption key and click [Connect]. • Input an encrypiton key of “ WEP ” . Enter “ NECVT ” in the Network key box, for example, if you have the WEP setting on the projector side configured with “ 64bit ” and have “ NECVT ” input as Key 1. • The same[...]

31 Refer to “ User ’ s Guide ” and Help 7. Refer to “ User ’ s Guide ” and Help 7 7. Refer to “ User ’ s Guide ” and Help Each software program in User Supportware 3 contains each help file that explains the functions and operation methods in detail. Also, “ User ’ s Guide ” (PDF) explains the basic operation procedure of ea[...]

32 7. Refer to “ User ’ s Guide ” and Help Reference If the above menu is not displayed, follow these steps. 1. Click [Start] of Windows. 2. Click [Run...]. 3. In the [Open:] field, enter the CD-ROM drive name *1 (e.g., “ Q: ” ) followed by “ SETUP .EXE ” (e.g., “ Q:SETUP .EXE). *1 The CD-ROM drive name will vary depending on your[...]

33 Refer to “ User ’ s Guide ” and Help 7. Refer to “ User ’ s Guide ” and Help 7 7-2. Using Help The functions and operation of each software are described on the Help screen. This section introduces how to display and use the Help screen. Note • The following instructions use operations under Windows XP as an example. • Before dis[...]

34 7. Refer to “ User ’ s Guide ” and Help 34 ■ Displaying Ulead Photo Explorer 8.0 Help T o display the Help of Ulead Photo Explorer 8.0, start the software and make your selection from the [Help] menu. 1 Click [All Programs] in the start menu → [Ulead Photo Explorer 8.0 SE Basic] → [Ulead Photo Explore 8.0 SE Basic], in that order . T[...]

[...]

L T380/L T280 Wired and Wir eless Network Setup Guide 2900 Dukane Drive St. Charles, Illinois 60174 www .dukcorp.com/av T oll-free: 800-676-2487 Fax: 630-584-5156 e-mail: avsales@dukcorp.com Audio Visual Products #070032[...]