Daewoo DP-42GM manuel d'utilisation

PLASMA DISPLA Y USER’S MANUAL DAEWOO ELECTRONICS CO., L TD. DP-42GM DP-42S M DP-42W M Proper use guarantees product life. Before using the product, be advised that you read this owner’s manual well and try to operate it. - Product Warranty is included -[...]

2 This Owner ’ s Manual presents safety precautions and how to use the product. After reading it thoroughly , use the product safely . Keep this manual where the user can see it easily . Failure to comply with warnings and cautions for the safe use of electric appliances may cause fire or human injury . •4 2 ” super-wide, 3.15 ” Ultra Slim[...]

FCC RF INTERFERENCE ST FCC RF INTERFERENCE ST A A TEMENT TEMENT NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,[...]

Always obey all safety messages. • All the safety and operating instructions should be read before the product is operated. If anything strange happens, unplug this product from the wall outlet. • Do not disassemble or replace any parts of the monitor . Refer to a qualified service personnel for fepair . Safety Precautions 4 W ARNING Y ou can [...]

5 While Using Monitor Do not open cover (or back) because high voltage is present within the monitor’s enclosure. It may cause electric shock. Never push objects of any kind into this product through openings at the back of monitor. It may cause fire or electric shock. No objects filled with liquids, such as vases, shall be placed on the monito[...]

Always obey all safety messages. • All the safety and operating instructions should be read before the product is operated. Safety Precautions 6 Power Installation CAUTION Y ou can be injured or this product or any other your property can be damaged if you don’t follow instructions. When moving your monitor, remove the power plug, antenna, and [...]

7 7 During Use CAUTION Y ou can be injured or this product or any other your property can be damaged if you do not follow instructions. Do not wipe the monitor using a cloth damped with chemicals (benzene, thinner, etc.). Monitor appearance may be marred. (Unplug the power plug and wipe with soft cloth.) Do not place the monitor near magnetic, spea[...]

8 INPUT SELEC T POW E R D ISPLAY ZOOM - P IC TU R E M O D E S C R EEN M O D E F R EE Z E M U T E S O U N D M O D E SLEE P ZO O M + M E NU V OL VO L Remote Control 1 UNIT Batteries (AAA) 2 UNITS AC Cable 1 UNIT PC(15pin) Cable 1 UNIT A/V Cable 2 UNITS Audio Cable 1 UNIT Note Check to be sure that the following items are packed with your Monitor. Che[...]

9 Note The following items are optional accessories. Refer purchasing optional accessories from Daewoo Electronics Local Dealer or the dealer from where you purchased the unit. Optional Accessories DSP-SP20/SP21/SP22 - Speaker Main Unit Dimension : 3.94(W) x 24.72(H) 3.27(D)inch - Including Speaker Stand Dimension : 6.69(W) x 28.7(H) x 7.64(D)inch [...]

[...]

11 4 • Safety Precautions 12 • Panel Controls 13 • Remote control PREP ARA TION BASICS 14 • Installation Instructions 15 • Connecting Speaker to PDP CONNECTION 16 • W atching Digital Broadcasts 18 • W atching Cable Broadcasts 20 • W atching Satellite Broadcasts 22 • W atching a DVD Image 24 • W atching a VCR Image 26 • W atchi[...]

Panel Controls 12 Front Panel, Back Panel, Remote Control * Parts having same names in Plasma Display and Remote Control would function in exactly the same way . Front Rear PC INPUT UPGRADE PORT DTV/DVD INPUT VIDEO INPUT SPEAKER(8 OHMS) RL L R AUDIO L- AUDIO -R L- AUDIO -R VIDEO S-VIDEO PC INPUT UPGRADE PORT DTV/DVD INPUT VIDEO INPUT SPEAKER(8 OHMS[...]

13 Remote Control When Using Remote Control: • Be sure not to allow the Remote Control to drop or to become wet. • Keep it away from hot or moist locations. Installing the Batteries in your Remote Control: • To remove the cover, slide it outwards while pressing it down. • Place two batteries in the remote control by properly orienting them,[...]

14 Installation Instructions When Using the Stand (Assembled Picture) M5 SCREWS T ake out the ST AND from the package. 1 Engage the assembled stand with 4 screws (M5) enclosed. 3 Smoothly fit the Stand to the Plasma Display Panel 2 Erect the Display 4 * When installing PDP Main Unit, be sure it is done by more than 2 professionals. * For detailed [...]

15 Connecting the Speaker to the Stand 1 Connecting the Speaker Cable 2 • By using a (-) driver or coin, fasten the special screw securely . Be sure to check if there is a sponge attached to the surface on which the speaker is contacted. • Connect one set (two cables) of the cable to the terminals on the back of the speaker in the way that red [...]

W atching Digital Broadcasts • T o watch digital broadcasts: - Purchase a separate digital Broadcasting Receiver(SET -TOP BOX) - Connect the PDP to a Cable Broadcasting Receiver that is provided by a company which re- transmits digital broadcasts. 16 W atching Digital Broadcasts Press the Power Buttons • Press the Power buttons of the PDP and t[...]

17 Input Select INPUT SELECT • Select [Component 1 or Component 2] by pressing the INPUT SELECT button of the Remote Control or the PDP unit. • Each time you press the INPUT SELECT button, different input modes appear . The sequence is as follows: Component 1 - - > Component 2 - - > Video 1 - - > Video 2 - - > PC. Select a Desired C[...]

W atching Cable Broadcasts • T o watch cable broadcasts, subscribe to your local Cable TV Broadcasting, and then, connect the digital set-top box for cable TV to the PDP as shown below . W atching Cable Broadcasts 18 Press the Power Buttons • T urn the PDP and the Receiver ON. 2 Connect a CABLE Broadcasting Receiver to the PDP . • Prepare the[...]

19 Input Select INPUT SELECT • Select [Video 1 or Video 2] by pressing the INPUT SELECT button of the Remote Control or the PDP unit. • Each time you press the INPUT SELECT button, different input modes appear. The sequence is as follows: Video 1 - - > Video 2 - - > PC - - > Component 1 - - > Component 2. Select a Desired Channel an[...]

W atching Satellite Broadcasts • T o watch satellite broadcasting, subscribe to a Digital Satellite Broadcasting, then connect the digital set-top box for satellite broadcasting to the PDP as shown below . W atching Satellite Broadcasts 20 Press the Power Buttons • T urn the PDP and the Receiver ON. 2 Connect a Satellite Broadcasting Receiver t[...]

21 Input Select INPUT SELECT • Select [Video 1 or Video 2] by pressing the INPUT SELECT button of the Remote Control or PDP unit. • Each time you press INPUT SELECT button, a different input mode appears. The sequence is as follows: Video 1 - - > Video 2 - - > PC - - > Component 1 - - > Component 2. Select a Desired Channel and Func[...]

W atching a DVD Image • Component Input is set to 480i and 480p mode. • Connect the cable from the DVD Video Output (Y , Pb/Cb, Pr/Cr) to the Component Input at the back PDP , and connect the cable from DVD Audio output (Left, Right) to the Audio Input at the back of PDP . W atching a DVD Image 22 Press the Power Buttons • T urn the PDP and t[...]

23 Input Select INPUT SELECT • Select [Component 1 or Component 2, Video1, V ideo2] by pressing the INPUT SELECT button of the Remote Control or the PDP unit. • Each time you press the INPUT SELECT button, a different input mode appears. The sequence is as follows: Component 1 - - > Component 2 - - > Video 1 - - > Video 2 - - > PC. [...]

W atching a VCR Image • V ideo can use either the normal video terminal or the S-video terminal. W atching a VCR Image 24 Press the Power Buttons • T urn the PDP and the VCR ON. 2 Connect a VCR to the PDP . • Prepare the A V cable. • Connect the Video(Output) to PDP(V ideo Input) as shown below . 1 VIDEO INPUT L- AUDIO -R VIDEO S-VIDEO PC I[...]

25 Input Select INPUT SELECT • Select [V ideo 1 or Video 2] by pressing the INPUT SELECT button of Remote Control or PDP unit. • Each time you press the INPUT SELECT button, a different input mode appears. The sequence is as follows: Video 1 - - > Video 2 - - > PC - - > Component 1 - - > Component 2. Select a Desired Title and Funct[...]

W atching a Camcorder/Game Console Image • Enjoy images recorded by camcorder or the game console after connecting to the PDP . W atching a Camcorder/Game Console Image 26 Press the Power Buttons • T urn the PDP and the Camcorder/Game Console ON. 2 Connect a Camcorder/Game Console to the PDP . • Prepare the A V cable. • Connect the Video(Ou[...]

27 Input Select INPUT SELECT • Select [V ideo 1 or Video 2] by pressing the INPUT SELECT button of the Remote Control or the PDP unit. • Each time you press the INPUT SELECT button, a different input mode appears. The sequence is as follows: Video 1 - - > Video 2 - - > PC - - > Component 1 - - > Component 2. Select a Desired Title a[...]

Connecting PC • DAEWOO PLAZMA supports resolution of VGA, SVGA, XGA, SXGA, UXGA. • Before connecting a PC to the PDP , be sure to adjust the resolution of PC. • This product is not supported by Plug and Play , so select Standard Monitor when setting PC monitor . Connecting PC 28 Connect the PC to the PDP . • Prepare the PC cable (D-sub 15pi[...]

29 Input Select INPUT SELECT • Select [PC] by pressing the INPUT SELECT button of the Remote Control or PDP unit. • Each time you press the INPUT SELECT button, a different input mode appears. The sequence is as follows: PC - - > Component 1 - - > Component 2 - - > Video 1 - - > Video 2. Enjoy Dynamic Ultra Screen Monitor by Using P[...]

PC Input Resolution A vailable in PDP Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) Remark 30 31.469 37.861 24.823 30.48 31.469 37.861 31.469 35 37.861 37.5 39.375 43.269 31.47 31.469 37.927 31.54 15.63 35.156 35.16 37.879 48.077 46.875 53.674 49.726 48.193(48.077) 48.363 53.95 56.476 60.241 60.023 68.677 80.66 70.84 54 63.851 67.5 77[...]

Selecting Auto Picture Mode • Select the Picture modes that are automatically set depending on the kinds of pictures, and enjoy them. Selecting Picture Mode PICTURE MODE • Press the [PICTURE MODE] on the Remote Control. • Pressing the [PICTURE MODE] first time will display the current PICTURE MODE. Each Press of the Button Will Select One of[...]

Customizing Picture • Y ou can adjust the color tone and brightness to your preference. Customizing Picture 32 INPUT SELECT POWER DISPLA Y ZOOM - PICTURE MODE SCREEN MODE FREEZE MUTE SOUND MODE SLEEP ZOOM+ MENU VOL VOL Press the / Button. • After selecting [Picture] by the / buttons, press the button that will display the following. Select the [...]

Select User Mode Adjustments Picture Condition Adjustments • Press the / buttons to adjust the picture at your preference. 4 5 Picture Sound Screen Utility Input Mode Brightness Contrast Color T int Sharpness Color T emp. User Normal Move Previous Adjust Picture Sound Screen Utility Input Mode Brightness Contrast Color T int Sharpness Color T emp[...]

Adjusting Screen Size • Y ou can adjust screen size or aspect ratio as desired. Adjusting Screen Size 34 INPUT SELECT POWER DISPLA Y ZOOM - PICTURE MODE SCREEN MODE FREEZE MUTE SOUND MODE SLEEP ZOOM+ MENU VOL VOL Press the SCREEN MODE Button. • Each time you press the SCREEN MODE button on the Remote Control, a dif ferent SCREEN MODE appears. T[...]

35 Press the MENU Button. • Press the [MENU] button on the Remote Control. Select “Screen”. • Press the Channel / buttons to select “Screen.” Select the Screen Size. • Press the V olume / buttons to select “Screen Size”. 3 1 2 Adjusting from MENU Screen Picture Sound Screen Utility Input Mode Brightness Contrast Color T int Sharpn[...]

Adjusting Screen Position and Size • Y ou can adjust the screen position and size as desired. • This function is only used when adjusting the screen position and size on the PDP monitor by using the PC input signal. INPUT SELECT POWER DISPLA Y ZOOM - PICTURE MODE SCREEN MODE FREEZE ZOOM+ MENU VOL VOL Press the MENU Button. • The MENU screen a[...]

37 Press the V olume / Buttons. • Press the V olume / buttons to select “Screen”. • While you are in ‘Screen’ mode, press the or button to select a desired item, and then, adjust the value by pressing or . 3 Picture Sound Screen Utility Input H. Size V . Size H. Position V . Position Phase Frequency Move Previous Adjust NOTES: 1) Horizo[...]

INPUT SELECT POWER DISPLA Y ZOOM - PICTURE MODE SCREEN MODE FREEZE MUTE SOUND MODE SLEEP ZOOM+ MENU VOL VOL Press the ‘ZOOM+’ Button. • Press the ‘ZOOM+’ button to show currently selected screen size. • Each time you press the ‘ZOOM+’ button, the screen size will increase stepwise in 0 ~ 20 scale. • T o reduce the screen size, pre[...]

Move the Screen Position. • While you are in the ‘Zoom’ mode, press the / , / buttons to move screen stepwise up/down, left/right, respectively . 2 39 NOTES: * When the screen is enlarged, the pixel of the screen can become thick and dim. * When only subtitle of zoom level remains, you can scroll the image. If subtitle of zoom level disappear[...]

INPUT SELECT POWER DISPLA Y ZOOM - PICTURE MODE SCREEN MODE FREEZE MUTE SOUND MODE SLEEP ZOOM+ MENU VOL VOL Press the ‘FREEZE’ Button. • If you wish to freeze a picture, press the ‘FREEZE’ button. Y ou can still hear the sound. • Press FREEZE button to cancel the ‘FREEZE’ function. • T o view the enlarged images, press the [ZOOM+][...]

Adjusting Auto Sound Mode • Enjoy various sound modes by selecting your favorite Sound Mode depending on the kinds of moving pictures. Adjusting Auto Sound Mode 41 INPUT SELECT POWER DISPLA Y ZOOM - PICTURE MODE SCREEN MODE FREEZE MUTE SOUND MODE SLEEP ZOOM+ MENU VOL VOL Select SOUND Mode. SOUND MODE • Press the [SOUND MODE] on the Remote Contr[...]

Customizing Sound Mode • This feature allows the user at adjust at his preference. Customizing Sound Mode 42 Press the / Button. • Select [SOUND] by the / buttons, then press the button to display the following. Select SOUND BALANCE. • Select [SOUND BALANCE] by the / buttons, then adjust it. • Sound balance is best at ‘0’. • Sound Bal[...]

Select the Spatial Effect Mode. • Select Spatial Effect by pressing the / buttons, then select ON/OFF by pressing the button. • Spatial Effect: Used to feel grotesque by emphasizing stereo ef fect. Select the SOUND Mode. 4 5 Picture Sound Screen Utility Input Balance Spatial Effect Sound Mode On Normal Move Previous Adjust Picture Sound Screen [...]

INPUT SIGNAL • Used to select INPUT signal of external device connected to the PDP . Selecting INPUT SIGNAL 44 Press the INPUT SELECT Button. INPUT SELECT • Press the [INPUT SELECT] button on the Remote Control or the PDP Display to select [COMPONENT 1] or [COMPONENT 2]. • Each time you press the [input select] button, a different screen mode[...]

45 Press the MENU Button. MENU • Press the [MENU] button on the Remote Control. 1 Adjusting from the MENU Screen Select INPUT . • Select [INPUT] by the / button. Select INPUT SIGNAL. • Select [INPUT SIGNAL] by the / buttons, then press the button. 3 2 Picture Sound Screen Utility Input Mode Brightness Contrast Color T int Sharpness Color T em[...]

Checking the Current Input Signal • Used to check the INPUT signal mode, resolution, frequency , etc. of the current screen. Checking the Current Input Signal 46 Press the DISPLA Y Button. DISPLA Y • Press the [DISPLA Y] button on the Remote Control. 1 1. If you watch Digital Broadcasts: Displays which input terminal is used, and indicates the [...]

Selecting Languages • Used to select transparency of the background screen and language used in MENU. Press the MENU Button. MENU • The MENU screen will be displayed as below . Press the / Button. • Select [Utility] by the / button. Select the MENU Background Screen. • Select the [MENU Background Screen] by pressing the button. • Every pr[...]

INPUT SELECT POWER DISPLA Y ZOOM - ZOOM+ MENU VOL VOL Back to Initialization • Y ou can restore the values of the adjustment/setting made in the MENU to factory settings. Selecting MENU Background Screen and Languages Select MENU LANGUAGE SELECT by the / Button. • Select LANGUAGE by the / button. • Every press of the button while you are in t[...]

Setting Sleep Timer • SLEEP TIMER turns the Monitor off after a preset time. Press the SLEEP Button. SLEEP • Press the [SLEEP] button on the Remote Control. • Pressing the [SLEEP] button first time will display the current setting for SLEEP TIMER. • T o cancel the SLEEP TIMER, press the Sleep button to select ‘OFF’. 1 Setting Sleep T i[...]

Before Requesting Service 50 Before Requesting for a Service St yo mm ps C h e c k s A c t i o n • There are empty spots at the top and the bottom area of the screen. • Check if the screen size of an image is wider than 16:9 aspect ratio (theater screen size). • When video screen is wider than 16:9 aspect ratio, you may see dark areas at the [...]

51 SPECIFICA TIONS In the event that the product has been submerged in the water in rainy season: Immediately wash it with clean water, and dry it in ashadow place, then call for service from the nearest Daewoo Service Center. Never plug the Power Cord since there is risk of electric shock and damag of the product. * Appearance and specifications [...]